Cement for stabilisation of industrial residues containing heavy metals

A method aimed at decreasing the toxicity of heavy metals [namely, Zn(II) and Cr(III)] in real polluted residues by immobilisation has been developed. The residues were processed either with two cement-type stabilisers or lime. The cement-type stabilisers were Portland cement and Depocrete SM/2 at the self-generated pH (ca. 11) which afforded physical as well as chemical potential for the immobilisation of heavy metals. The other stabiliser, lime, reduced organic compounds, thus favouring the decrease of the chemical oxygen demand (COD) and endowing the residue with better mechanical properties for transport. After leaching the stabilised residues using the standard leaching test [Order 13/10/89, Boletín Oficial del Estado (BOE) 270 10/11/89], three ways for establishing the toxicity of the treated residues were used, namely: (1) the ecotoxicity test using Photobacterium phosphoreum (DIN 38 412); (2) determination of the concentration of heavy metals by atomic absorption spectrometry (AAS); (3) determination of the COD or oxygen required for complete chemical oxidation of a water sample. Portland cement (20%) blended with Depocrete SM/2 (3%) acted as an effective stabiliser for residues containing heavy metals as it increased the ecotoxicity index (EC50) by more than five times. Thus the heavy metal concentration in the leaching liquid was lowered to less than 0.1 mg l-1. The addition of 5% of lime afforded a residue easily transportable from the place of treatment to the landfill. The precision of the method was studied in terms of both repeatability and reproducibility. The values found with respect to EC50 and expressed as the relative standard deviation (RSD) were 1.6% and 5.1%, respectively.     

Evaluation of analytical strategies for the determination of metal concentrations to assess landfill leachate contamination

Due to the complex nature of landfill leachates, metal and metalloid analyses prove to be tricky and suffer from a lack of standard protocols. A complete approach has been adopted to investigate the influence of the different steps during the sample processing of French landfill leachates. The validation of the entire protocol has been achieved using a laboratory reference material. This material, which is a real landfill leachate, is representative of real samples. Its evaluation has allowed a quality control for metal and metalloid analyses in landfill leachates. Precautions concerning storage temperature, aeration and filtration are proposed to perform accurate metal analyses in these complex matrices. The sample processing has been applied to the seasonal monitoring of a French landfill. The assessment of major leachate metallic contaminants such as As, Cr, Sb, Sn, has been performed by evaluating the relative enrichment of metals and metalloids in comparison with rain water and groundwater. In addition, hydrological data are useful and complementary information for pointing out the main factors affecting metal concentrations and thus their potential remobilisation pathways.     

Removal of phenols and other pollutants from different landfill leachates using powdered activated carbon supplemented SBR technology

In this research, two types of sequencing batch reactors (SBRs) with 8 h of cycle times, namely non-powdered activated carbon (NPAC-SBR) and powdered activated carbon (PAC-SBR), were used for the treatment of raw leachates at Kulim and Pulau Burung landfill sites. To test the performance of SBRs, phenols, total iron, zinc, ammonia, nitrite, nitrate, color, suspended solids, chemical oxygen demand, biochemical oxygen demand, and total dissolved salts removal efficiencies and sludge volume index (SVI) were studied at both sites. The rates of phenols removal, for instance in NPAC-SBRs and PAC-SBRs at Kulim, were 25% and 55%, respectively, whereas those at Pulau Buring were 94.81% and 97.75%, respectively. PAC as adsorbent in PAC-SBRs enhanced the removal efficiencies of the aforementioned pollutants from leachates at both sites. In addition, PAC as adsorbent decreased the SVI values at Kulim (59.7 mL/g) and Pulau Burung (91.4 mL/g) leachates and improved the nitrification and denitrification processes.     

Assessment of the impact of landfill on groundwater quality: A case study of the Pirana site in western India

In present study focus has been given on estimating quality and toxicity of waste with respect to heavy metals and its impact on groundwater quality, using statistical and empirical relationships between different hydrochemical data, so that easy monitoring may be possible which in turn help the sustainable management of landfill site and municipal solid waste. Samples of solid waste, leachate and groundwater were analyzed to evaluate the impact of leachates on groundwater through the comparison of their hydrochemical nature. Results suggest the existence of an empirical relationship between some specific indicator parameters like heavy metals of all three above mentioned sample type. Further, K/Mg ratio also indicates three groundwater samples heavily impacted from leachate contamination. A good number of samples are also showing higher values for and Pb than that of World Health Organization (WHO) drinking water regulation. Predominance of Fe and Zn in both groundwater and solid waste samples may be due to metal plating industries in the area. Factor analysis is used as a tool to explain observed relation between numerous variables in term of simpler relation, which may help to deduce the strength of relation. Positive loading of most of the factors for heavy metal clearly shows landfill impact on ground water quality especially along the hydraulic gradient. Cluster analysis, further substantiates the impact of landfill. Two major groups of samples obtained from cluster analysis suggest that one group comprises samples that are severely under the influence of landfill and contaminated leachates along the groundwater flow direction while other assorted with samples without having such influence.     

Leachate of fly ash derived from refuse incineration

For highly urbanized cities where there is a scarcity of land available for landfilling, incineration of refuse is a feasible solution for solid waste disposal. After incineration, about 20% by weight of fly ash and other residues are produced and disposed of by landfill. Leachate tests carried out on samples of fly ash show that the heavy metal concentrations of the leachate are in excess of the permissible limits set by WHO. Lime and cement are used to stabilize the fly ash. The concentrations of heavy metals in the leachates of lime and cement treated fly ash are non-detectable. In additional to pollution control, the lime and cement treated fly ash significantly improves the properties of soft clay.     

Application of multivariate statistical techniques in hydrogeochemical studies—a case study: Brahmani–Koel River (India)

This study presents the usefulness of multivariate statistical techniques, such as correlation matrix, cluster analysis, and factor analysis, for the evaluation and interpretation of complex water quality data sets of Brahmani–Koel river along the Rourkela Industrial Complex, India, and the apportionment of pollution sources/factors. The correlation study suggests that dissolved heavy metals, biochemical oxygen demand (BOD), and chemical oxygen demand (COD) are contributed by anthropogenic sources. The results of R-mode factor analyses revealed that anthropogenic contributions are responsible for increase in metals of the river water, which is mainly responsible for contamination of the river. It also reflected that the level of pollution in the river was very high. The factor score plot and loading plot have been drawn, which indicate that the polluted stations are identified by the heavy metals. The relationships among the stations are highlighted by cluster analysis, represented in dendograms to categorize different levels of contamination. An attempt has been made to study the degree of contamination of the river waters by using a tool like enrichment ratio (ER). The ER for heavy metal concentrations concluded that metals like Ni, Co, Cr, and Fe are showing high enrichment with respect to global background and metal ions like Fe, Mn, Cu, and Zn show high enrichment with respect to local background.     

典型重金属污染农田能源植物示范种植研究

为探索安全经济利用重金属中度-重度污染农田的模式,在浙江某典型重金属复合污染农田开展了能源植物(甜高粱Sweet sorghum、甘蔗Saccharum sinensisRoxb.、香根草Vetiveria和盐肤木Rhus chinensis)种植示范研究.结果表明,经施加0.1%的石灰和0.2%的磷矿粉改良后,土壤p...     

徐州市生活垃圾填埋场地下水典型金属污染物研究

在对徐州地区生活垃圾填埋场调查分析的基础上,根据填埋特征和地质状况选取4座典型填埋场为调查对象,采用ICP-MS对垃圾渗滤液及地下水中26种重金属进行监测分析。结果表明,在4个垃圾填埋场地下水及渗滤液中ρ(Sr)均相对较高(700μg/L);地下水中金属元素均正在以Ca,Mg为主向Na,Mg为主转化;地下水中Al,B质量浓度大小顺序为Y场(雁群)S场(睢宁)C场(翠屏山)P场(邳州);4个垃圾填埋场共同典型重金属污染物为Mn,Fe,Zn,Ba;除上述污染物外,Y场地下水潜在典型重金属污染物为Pb和Mo;S场为Mo和As;C场为Tl和Co;P场为As。     

Measurement of wastewater treatment efficiency by fluorescence and UV absorbance

The degree of chemical treatment in terms of removal of organic matter from different wastewaters has been investigated by employing potassium ferrate (K₂FeO₄) and ozone in various combinations. The study was performed in both the batch and the continuous flow systems. The treatment efficiency was determined through three different methods, i.e., chemical oxygen demand (COD), fluorescence and ultraviolet (UV) absorption. Fluorescence and UV absorption techniques were employed due to their specificity in measurement of humic substances, aromatic compounds and heterocyclic systems, whereas COD is a general parameter for the estimation of total organic matter. Fluorescence and UV absorbance values were correlated with respective COD values.Abdul Bari is with the Department of ChemistryShaukat Farooq is with the Department of Civil Engineering     

Assessment of the efficiency and economic viability of various methods of treatment of sanitary landfill leachate

This study assesses the efficiency of various physico-chemical, biological and other tertiary methods for treating leachate. An evaluation study on the treatability of the leachate from methane phase bed (MPB) reactor indicated that at an optimum hydraulic retention time of 6 days, the efficiency of the reactor in terms of biological oxygen demand (BOD) and chemical oxygen demand (COD) removal was 91.29 and 82.69%, respectively. Recycling of the treated leachate through the municipal solid waste layers in the leachate recycling unit (LRU) resulted in a significant increase in the biodegradation of organics present in the leachate. Optimum BOD and COD removal efficiencies were achieved at the third recycle; additional recycling of the leachate did not produce any significant improvement. Physico-chemical treatment of the leachate demonstrated that alum and lime (Option 2) were more economical than coagulants lime and MgCO₃. A cost analysis of the economics of the various treatments revealed that the alternative treatment consisting of a MPB bed followed by a LRU and aerated lagoon is the most cost-effective treatment. However, the alternative consisting of a MPB followed by the LRU and a soil column, which is slightly more costly, would be the most appropriate treatment when adequate land is readily available.     

Characterization and pollution potential assessment of Tunceli, Turkey municipal solid waste open dumping site leachates

Environmental monitoring of leachate quality from an open municipal solid waste dumping site in Tunceli, Turkey was studied in this research. The most commonly examined pollution parameters were determined on a seasonal basis. The annual average 5-day biological oxygen demand (BOD₅) and chemical oxygen demand (COD) values of station points were measured as 70 and 425 mg/L, respectively, and also the average BOD₅/COD ratio (a measure of biodegradability) was calculated as 0.20. The low ratio of biodegradability and slightly alkaline pH values in the leachate samples indicated that the site was characterized by methanogenic conditions. The mean ammonium-nitrogen (NH₄ ⁺-N) and corresponding phosphate (orthophosphate) values were assayed as 70 and 11 mg/L, respectively. The average solids content in the leachates was measured as 4,681 mg/L (total solids) and 144 mg/L (suspended solids). Very low concentrations of iron, manganese, copper, and zinc in the leachate samples were found and the concentration of cadmium was measured below detection limits. Excessive amount of nutrients and high organic and inorganic pollutant content in the leachates pose serious pollution potential to the environment. Since no drainage system or bio treatment exists in this open dumping site, high permeability of natural soil at the site and in the surrounding area and very fractured and crackled rocks under natural soil are indicators of high groundwater pollution potential in this site.     

Study on the law of heavy metal leaching in municipal solid waste landfill

Comparative leaching experiments were carried out using leaching medium with different pH to municipal solid waste in the landfill columns in order to investigate the mobility of heavy metals. The leachate pH and oxidation–reduction potential were measured by oxidation–reduction potential analyzer; the contents of heavy metals were measured by inductively coupled plasma mass spectrometry. It is very different in leaching concentrations of heavy metals; the dynamic leaching of heavy metals decreased with the rise of the leaching amount on the whole. Acid leaching medium had definite influence on the leaching of heavy metals in the early landfill, but it had the obvious inhibition effect on the leaching in the middle and late period of landfill; the neutral and alkaline leaching medium are more beneficial to the leaching of heavy metals. Due to the influence of the environment of landfill, the differences of the results in cumulative leaching amount, leaching rate, and leaching intensity of heavy metals are very big. The calculation results of the release rates of heavy metals prove that the orders of the release rates are not identical under different leaching conditions. Acid rain made heavy metals migrate from municipal solid waste to soil and detain in soil more easily; approached neutral and alkaline leaching mediums are more beneficial to leaching of heavy metals in the municipal solid waste and soil with leachate. The field verification of experimental data showed that the law of heavy metal leaching in municipal solid waste revealed by the experiment has a good consistency with the data obtained by municipal solid waste landfill.     

Heavy metal pollution of ambient air in Nagpur City

Heavy metals released from different sources in urban environment get adsorbed on respirable particulate matter less than 10 μm in size (PM₁₀) and are important from public health point of view causing morbidity and mortality. Therefore, the ambient air quality monitoring was carried out to study the temporal and special pattern in the distribution of PM₁₀ and associated heavy metal content in the atmosphere of Nagpur, Maharashtra State, India during 2001 as well as in 2006. PM₁₀ fraction was observed to exceed the stipulated standards in both years. It was also observed that minimum range of PM₁₀ was observed to be increased in 2006 indicating increase in human activity during nighttime also. Six heavy metals were analyzed and were observed to occur in the order Zn > Fe > Pb > Ni > Cd > Cr in 2006, similar to the trend in other metro cities in India. Lead and Nickel were observed to be within the stipulated standards. Poor correlation coefficient (R ²) between lead and PM₁₀ indicated that automobile exhaust is not the source of metals to air pollution. Commercial and industrial activity as well as geological composition may be the potential sources of heavy metal pollution. Total load of heavy metals was found to be increased in 2006 with prominent increase in zinc, lead, and nickel in the environment. Public health impacts of heavy metals as well as certain preventive measures to mitigate the impact of heavy metals on public health are also summarized.     

黑龙江流域水环境背景值研究进展

黑龙江流域地处世界三大黑土区之一的中国东北平原，土壤腐殖质含量高，这些腐殖质随着地面径流进入水体，成为流域溶解性有机物（DOM）的自然本底（环境背景）。自然本底的存在导致流域水质有机污染综合指标不能真实反映流域的人为污染，流域背景区内高锰酸盐指数、化学需氧量背景值范围分别为3.0~11.7、14.3~40.5 mg/L。流域部分水质考核断面水质受到有机质背景值的影响。由于叠加人为污染，定量分析高锰酸盐指数、化学需氧量背景值范围存在很大难度。重金属元素相对稳定，相对于"六五"时期重金属背景值，目前水体中重金属含量普遍升高。结合水环境管理需求，背景值研究成果应用于水环境管理还需要进一步深入研究和实践。笔者在综述黑龙江流域水环境背景值研究基础上，总结目前存在的问题，提出水环境背景值研究建议，为科学客观评价流域水质提供参考。     

Effects of multi-metal toxicity on the performance of sewage treatment system during the festival of colors (Holi) in India

The present study investigated the effects of heavy metals (Ni, Zn, Cd, Cu, and Pb) toxicity on the performance of 18 MLD activated sludge process-based sewage treatment plant (STP) during celebration of Holi (festival of colors in India). The composite sampling (n?=?32) was carried out during the entire study period. The findings show a significant decrease in chemical oxygen demand removal efficiency (20%) of activated sludge system, after receiving the heavy metals laden wastewater. A significant reduction of 40% and 60% were observed in MLVSS/MLSS ratio and specific oxygen uptake rate, which eventually led to a substantial decrease in biomass growth yield (from 0.54 to 0.17). The toxic effect of metals ions was also observed on protozoan population. Out of the 12 mixed liquor species recorded, only two ciliates species of Vorticella and Epistylis exhibited the greater tolerance against heavy metals toxicity. Furthermore, activated sludge shows the highest metal adsorption affinity for Cu, followed by Zn, Pb, Ni, and Cd (Cu?>?Zn?>?Pb?>?Ni?>?Cd). Finally, this study proves the robustness of activated sludge system against the sudden increase in heavy metal toxicity since it recovered the earlier good quality performance within 5?days.     

洪泽湖鱼体内重金属含量调查

对洪泽湖鱼体中的Pb、Cd、Cu、Cr、Zn等5种重金属进行了测定,分析了不同重金属在鱼的组织器官中的含量分布情况,并重点探讨了重金属在鱼体内的富集规律。结果显示：同一类组织器官中重金属的含量、同一金属在不同组织器官中的分布、不同鱼类对同种金属元素的吸收积累存在显著差异,5种重金属的含量以肌肉中的含量最低;均值型指数法显示,鱼样中肌肉组织残毒污染较小,属于微污染到轻污染级别;污染负荷比说明洪泽湖鱼体残毒的主要污染因子是铅、镉。     

An investigation of heavy metal and migration through groundwater from the landfill area of Eskisehir in Turkey

This paper was conducted in order to determine the groundwater and soil pollution within and around the landfill of Eskisehir, Turkey. In this paper, mud, leachate and groundwater samples were collected seasonally a year from near Eskisehir landfill-site to investigate the possible impact of leachate which affects soil and groundwater quality. Concentrations of various heavy metals (Fe, Cu, Zn, Mn, Co, Pb, Cr, Ni and Mo) were determined in mud, leachate and groundwater samples. In addition, the heavy metal transportation infiltrated from landfill through a porous medium into the groundwater was modelled in order to determine the potential groundwater pollution caused by the leachate of the landfill. The modelling of the contaminant transportation was carried out by using a multiflow computer programme which simulates the distribution of heavy metal concentrations. As a result of this study, the distribution of the contaminant concentration was modelled and determined with respect to time and distance. Hence, the contaminant concentrations were determined at any time interval according to distance. The heavy metal contamination in groundwater does not affect the wells found at far points from the source in a short time, e.g. 10, 20 and 30 days according to the obtained experimental results. When the time intervals extended more than 1 year, heavy metal concentrations decrease with distance but the concentration of the contamination increases when it gets closer to the pollution source. In this study, the potential contamination of groundwater was effectively estimated.     

Measurement of biochemical oxygen demand of the leachates

Biochemical oxygen demand (BOD) of the leachates originally from the different types of landfill sites was studied based on the data measured using the two manometric methods. The measurements of BOD using the dilution method were carried out to assess the typical physicochemical and biological characteristics of the leachates together with some other parameters. The linear regression analysis was used to predict rate constants for biochemical reactions and ultimate BOD values of the different leachates. The rate of a biochemical reaction implicated in microbial biodegradation of pollutants depends on the leachate characteristics, mass of contaminant in the leachate, and nature of the leachate. Character of leachate samples for BOD analysis of using the different methods may differ significantly during the experimental period, resulting in different BOD values. This work intends to verify effect of the different dilutions for the manometric method tests on the BOD concentrations of the leachate samples to contribute to the assessment of reaction rate and microbial consumption of oxygen.     

Genotoxicity evaluation of water soil leachates by Ames test, comet assay, and preliminary Tradescantia micronucleus assay

Combining genotoxicity/mutagenicity tests and physico-chemical methodologies can be useful for determining the potential genotoxic contaminants in soil samples. The aim of our study was to evaluate the genotoxicity of soil by applying an integrated physico-chemical-biological approach. Soil samples were collected at six sampling points in a Slovenian industrial and agricultural region where contamination by heavy metals and sulphur dioxide (SO₂) are primarily caused by a nearby power plant. The in vitro alkaline version of the comet assay on water soil leachates was performed with Caco-2 and HepG2 cells. A parallel genotoxicity evaluation of the samples was performed by Ames test using Salmonella typhimurium and the Tradescantia micronucleus test. Pedological analyses, heavy metal content determination, and different physico-chemical analyses, were also performed utilizing standard methodology. Water leachates of soil samples were prepared according to standard methods. Since only a battery of biotests with prokaryotic and eukaryotic organisms or cells can accurately estimate the effects of (geno)toxicants in soil samples and water soil leachates, a combination of three bioassays, with cells or organisms belonging to different trophic levels, was used. Genotoxicity of all six water soil leachates was proven by the comet assay on both human cell lines, however no positive results were detected by bacterial assay, Ames test. The Tradescantia micronucleus assay showed increase in micronuclei formation for three samples. According to these results we can assume that the comet assay was the most sensitive assay, followed by the micronucleus test. The Ames test does not appear to be sensitive enough for water soil leachates genotoxicity evaluations where heavy metal contamination is anticipated.     

Bioremediation of heavy metals using biostimulation in laboratory bioreactor

The present research study investigates bioremediation potential of biostimulated microbial culture isolated from heavy metals waste disposal contaminated site located at Bhayander (east), Mumbai, India. The physicochemical and microbial characterization including heavy metal contaminants have been studied at waste disposal site. The microorganisms adapted at heavy metal-contaminated environment were isolated, cultured, and biostimulated in minimal salt medium under aerobic conditions in a designed and developed laboratory bioreactor. Heavy metals such as Fe, Cu, and Cd at a selected concentration of 25, 50, and 100?μg/ml were taken in bioreactor wherein biostimulated microbial culture was added for bioremediation of heavy metals under aerobic conditions. The remediation of heavy metals was studied at an interval of 24?h for a period of 21?days. The biostimulated microbial consortium has been found effective for remediation of Cd, Cu, and Fe at higher concentration, i.e., 100?mg/l up to 98.5%, 99.6%, and 100%, respectively. Fe being a micronutrient was remediated completely compared to Cu and Cd. During the bioaccumulation of heavy metals by microorganisms, environmental parameters such as pH, total alkalinity, electronic conductivity, biological oxygen demand, chemical oxygen demand, etc. were monitored and assessed. The pilot scale study would be applicable to remediate heavy metals from waste disposal contaminated site to clean up the environment.