酸度介质对原子吸收法测定钙元素灵敏度的影响

对火焰原子吸收法测定钙元素的酸度介质条件进行了分析和论述。通过在不同的盐酸和硝酸介质条件下对钙元素的实际测定,较为充分地论述了不同的盐酸和硝酸介质条件对实验测定的影响,进而选择出最适宜的测定介质条件,提出了相关建议,使方法的测定灵敏度有了显著提高。     

冷原子吸收法直接测定废水中总汞

在较强的盐酸介质中,用硼氢化钠直接还原水样中总汞进行冷原子吸收测定。探讨了测汞的稳定性和最佳测定条件以及共存离子的干扰,发现了乙醇对测汞的增感作用,测定的绝对灵敏度0.24ng,相对标准偏差为0.65％,加标回收率在97～103％之间,适用于某些废水中总汞的直接测定。     

氧化显色法测定废水中铬

试验了在盐酸－磷酸介质中铬与苯基荧光酮的氧化反应。结果表明,黄色的苯基荧光酮被氧化成橙红色产物,其最大吸收波长为４９２ｎｍ。铬含量在０μｇ／５０ｍＬ－５０μｇ／５０ｍｌ范围内奠定比耳定律,表观摩尔吸光系数ε４９２＝２．１３＊１０＾４。用于水中铬的测定,结果满意。     

对硝基苯胺－H酸分光光度法测定水中亚硝酸盐

为提高光度法测定水中亚硝酸盐的分析灵敏度，利用亚硝酸离子在盐酸介质中与对硝基苯胺发生重氮化反应，然后在碱性介质中与Ｈ酸偶联，生成紫红色偶氮化合物。对实验条件进行了试验，提出了污染水中亚硝酸盐的测定方法，其最大吸收波长λｍａｘ＝５７４ｎｍ，摩尔吸光系数ε５７４＝４．８×１０４。此方法简便、快速、选择性好，灵敏度高，测定结果可靠。     

测定电镀废水中铬(Ⅵ)的新光度法

在硝酸介质中,二甲基黄先显色而后在加热条件下褪色,铬( )能显著阻抑此褪色反应,且阻抑程度与铬( )含量相关,据此建立了测定痕量铬( )的新方法。方法检出限是1.55×10-10g/ml,线性范围0.1～1.2μg/10ml,用于电镀废水中铬( )的测定,结果满意。     

氯化铵-火焰原子吸收光谱法测定地表水中的总铬

应用原子吸收法测定水样中的总铬，在不同条件下对空白样品、标准样品和实际样品进行试验分析，进一步验证了方法的准确度和精密度，加标回收率在96.8%-103%之间，相对标准偏差为2.1%。试验表明，该方法准确可靠，实际操作具有可行性，适用于工业废水和受污染地表水中总铬的测定。     

便携式分光光度法现场测定污染场地地下水中铬

在硫酸介质中,用Ce~(4+)将Cr~(3+)氧化成Cr~(6+),用便携式分光光度计现场测定铬污染地下水中的Cr~(3+)、Cr~(6+)和总铬。通过试验,对氧化还原反应的可行性、反应时间、酸度、Ce~(4+)加入量、DPC用量、稳定时间、干扰因素等条件优化,使该方法在0μg/L~1 600μg/L范围内线性良好,当取样量为25 m L时,方法检出限为12.5μg/L。用该方法测定实际样品,RSD为4.4%~8.2%。用该方法与标准方法同时测定Cr~(3+)、Cr~(6+)和总铬,2种方法的相对偏差为-4.4%~4.3%。     

火焰原子吸收法测定水中总铬

水中铬的测定有一定的技术难度。本文采用原子吸收测定方法，以铵盐作基体改进剂，可以有效地抑制铁与镍对水中铬的干扰。在仪器最佳工作条件下，对混合标准样进行了对比测定，获得了满意的测定结果     

地表水总铅的原子荧光法测定条件的优化研究

对地表水中总铅的原子荧光法测定条件进行了优化。考察了仪器负高压和灯电流、载气和屏蔽气流量、原子化器高度、介质及酸度、硼氢化钾浓度、铁氰化钾浓度等测定条件对结果的影响。优化确定条件为:负高压240V、灯电流80mA、原子化器高度10mm、载气流量300mL/min、屏蔽气流量800 mL/min、介质盐酸、酸度1.0%、硼氢化钾浓度1.0%、铁氰化钾浓度1.0%。在最佳测定条件下,标准曲线在0～50μg/L内线性良好,检出限为0.07μg/L,精密度为1.52%～2.79%,加标回收率为93.0%～101%。     

8-氨基喹啉-5-偶氮-对苯酚荧光光度法测定微量铬(Ⅵ)

在盐酸介质中,铬(Ⅵ)与AQAPOH形成可被氯仿萃取的荧光化合物,其λex/λem=295nm/400nm.线性范围为0-1.0μg Cr(Ⅵ)/25ml(水相),检测限为0.7μg/L.除Mn(Ⅶ)外,常见金属离子无干扰,可在数千倍Cr(Ⅲ)存在下测定废水中微量铬(Ⅵ).初步探讨了荧光反应的机理.     

过氧化氢氧化-全自动石墨消解仪消解-阳极溶出伏安法测定海水中总铬

采用全自动石墨消解仪加热、在碱性条件下用过氧化氢氧化海水中的三价铬,优化了极谱法测定条件,方法检出限为0.20μg/L,加标回收率为82.8%~105%,相对标准偏差5%,且对有证标准样品测试的结果符合准确度要求。方法具有选择性好、灵敏度高、准确等特点,适用于海水中总铬的测定。     

火焰原子吸收分光光度法测定总铬的研究

用火焰原子吸收分光光度法直接测定水和废水中的总铬.通过不同条件的实验,确定了最佳的分析条件;并通过标准样品和实际样品的分析,验证了方法的准确度和精密度.在大量实验基础上,建立空白实验、准确度质量控制图,以便定期对各种监测数据提供可行的质量保证措施.实验结果表明,该法快速方便,提高了分析效率,准确度高,精密度好,值得普及和推广.     

二氨基联苯胺分光光度法测定水质中硒的方法改进

采用3.3＇-二氨基联苯胺分光光度法对测定水质中硒的方法进行改进，主要研究了样品中硒的测定条件，通过对不同显色波长、酸碱度显色条件、显色剂用量、酸碱度比色条件的研究，得出比较理想的定量分析条件。采用该方法测定硒，显色稳定，准确度、精密度均能达到要求。     

Determination of total chromium by flame atomic absorption spectrometry after coprecipitation by cerium (IV) hydroxide

A method for the preconcentration of the total chromium based on coprecipitation with cerium (IV) hydroxide is proposed for determination of chromium by flame atomic absorption spectrometry. Different factors including carrier element amount, pH, sample volume and matrix ion effects for the precipitation were examined. The detection limit of the total chromium (k = 3, N = 15) was 0.18 μg l⁻¹. The presented method was applied for the determination of chromium in the wastewater samples from Kayseri and Nigde Organized Industrial Region-Turkey and in drinking water from our laboratory, Kayseri with satisfactory results (relative standard deviations below 8%, recoveries 95%). The analytical results obtained by the proposed method for certified copper sample was in good agreement with the certified value.     

Determination of total Cr in wastewaters of Cr electroplating factories in the I.organize industry region (Kayseri, Turkey) by ICP-AES

The wastewater pollution in industrial areas is one of the most important environmental problems. Heavy metal pollution, especially chromium pollution in the wastewater sources from electroplating, dyeing, and tannery, has affected the life on earth. This pollution can affect on all ecosystems and human health directly or by food chain. Therefore, the determination of total chromium in this study is of great importance. In this study, accurate, rapid, sensitive, selective, simple, and low-cost technique for the direct determination of total Cr in wastewater samples collected from the some Cr electroplating factories in March 2008 by inductively coupled plasma-atomic emission spectrometry has been developed. The analysis of a given sample is completed in about 15 min by this technique applied. As the result of the chromium analysis, the limit of quantification for the total Cr were founded to be over the limit value (0.05 mg L^???1; WHO, EPA, TSE 266, and inland water quality classification) as 1,898.78 ± 0.34 mg/L at station 1 and 3,189.02 ± 0.56 mg/L at station 2. The found concentration of total Cr has been determined to be IV class quality water according to the inland water classification. In order to validate the applied method, recovery studies were performed.     

显色酸度对钼锑抗分光光度法测定土壤中总磷的影响

采用碱熔-钼锑抗分光光度法测定土壤中总磷时,显色溶液的酸度影响磷钼络合物的形成和稳定,p H指示剂2,4-二硝基苯酚在环境温度低时配制困难、辨色不明显。分析了显色酸度对吸光值的影响,并对2,4-二硝基苯酚的配制方法进行了改进,方法操作简单,提高了分析结果的准确性。     

Sampling and analysis considerations for the determination of hexavalent chromium in workplace air

Airborne hexavalent chromium (Cr[VI]) is a known human respiratory carcinogen and allergen. Workers in a variety of industries may be exposed to airborne hexavalent chromium, with exposures frequently occurring via inhalation and/or dermal contact. Analytical methods for the measurement of Cr(VI) compounds in workplace samples, rather than for the determination of total elemental chromium in workplace air, are often desired because exposure limit values for Cr(VI) compounds are much lower than for total Cr. For years, sampling and analytical test methods for airborne Cr(VI) have been investigated so as to provide means for occupational exposure assessment to this highly toxic species. Inter-conversion of trivalent chromium (Cr[III]) and Cr(VI) can sometimes occur during sampling and sample preparation, and efforts to minimize unwanted redox reactions involving these chromium valences have been sought. Because of differences in toxicity, there is also interest in the ability to differentiate between water-soluble and insoluble forms of Cr(VI), and procedures that provide solubility information concerning Cr(VI) compounds have been developed. This paper reviews the state of the art concerning the measurement of airborne Cr(VI) compounds in workplace aerosols and related samples.     

盐酸萘乙二胺比色法测定大气中硝基苯、苯胺浓度的改进

本文探讨了盐酸萘乙二胺比色方法测定大气中硝基苯、苯胺浓度的最佳反应条件,如酸度、试剂加入量、反应温度、反应时间等。简化了过滤、洗涤操作,精密度高、显色稳定。     

Iron-rich Oklahoma clays as a natural source of chromium in monitoring wells

Water samples, drawn from groundwater monitoring wells located southeast of Oklahoma City, OK, were found to contain elevated concentrations of total chromium with an apparent source localized to the area surrounding each well. Since these monitoring wells are located in areas with no historic chromium usage, industrial sources of chromium were ruled out. Water testing was performed on twelve monitoring wells in the area that historically had elevated total chromium concentrations ranging from 10-4900 micrograms per litre. Filtered water samples were found to be free of chromium contamination, indicating that the source of the chromium is the suspended solids. Analysis of these solids by acid digestion and a sequential extraction technique revealed that the chromium was primarily associated with iron-containing solids. X-ray diffraction identified goethite, an iron oxide hydroxide, as the dominant iron-containing phase in the suspended solids. The mineralogy in this region is dominated by interbedded red-bed sandstone and mudstone whose mineral content includes mixed-layer illite-smectite, hematite, goethite, gypsum and dolomite. Elemental analysis of soil samples collected as a function of depth in the locale of the monitoring wells indicated that the iron rich clays contain a natural source of chromium. The elevated levels of total chromium are most likely due to the dissolution of silica and alumina from the chromium containing iron clays in the basic well water, resulting in the release of fine suspended solids that naturally have high chromium concentrations. These results should be applicable to other areas containing iron-rich clays.