Effect of Hydrogen Peroxide on Industrial Waste Water Effluents: A Case Study of Warri Refining and Petrochemical Industry

This paper assessed the composition of waste water effluent generated by a Petrochemical industry and a treatment system developed to improve the quality of the discharge water. Parameters as pH, COD, TSS chloride and lead ions were analysed and treated comparatively using hydrogen peroxide. At pH 8.0 post treatment analysis showed a COD – 96 mg/l TSS – 48 mg/l Cl – 798.75 mg/l and Pb²⁺ – 2 mg/l for treatment D where 40 g/l of alum was used on 30% solution of H₂O₂ compared to systems A-C. Process treatment included activated clay with sodium ion resin which at pH 6.8 had COD – 52 mg/l, TSS – 10 mg/l, Cl – 510 mg/l and Pb²⁺ – 0.070 mg/l. This system has an overall efficiency of 79.0% TSS, 45.83% COD, 97.5% Pb²⁺ and 36.1% Cl reduction. Characteristics obtained for the study has a higher efficiency compared with FEPA and WHO standard for similar industrial water treatment.     

Adsorption studies and the removal of dissolved metals using pyrolusite as adsorbent

The adsorption of metals from aqueous solutions of Pb²⁺, Zn²⁺ and Mg²⁺ on naturally occurring pyrolusite have been studied. The chemical stability of the pyrolusite has been determined in NaOH, H₂SO₄, HNO₃, HCl, NaCl and NK₄Cl solutions of various concentrations. Adsorption of the metal ions followed the order Pb²⁺>Zn²⁺>Cd²⁺.The maximum adsorption of Pb²⁺ (100%) occurred at pH 7. the relation between the amount of Pb²⁺ adsorbed per unit weight of pyrolusite and the concentration of Pb²⁺ at equilibrium follows the Freundlich adsorption isotherm.The efficiency of pyrolusite has been demonstrated by removing lead from synthetic waste water. 100% and 96% removal of lead have been achieved from synthetic waste water containing 5 mg l^–1 and 120 mg l^–1 of Pb²⁺ respectively at pH 7. The results of these studies suggest that pyrolusite might provide an economical method for the removal of lead from industrial waste water.     

Nutrient transfer by runoff from sewage sludge amended soil under simulated rainfall

Wastewater sludges are used in agriculture as soil amendment and fertilizer, with regard to their organic matter and nutrient content. However, availability of nitrogen and phosphorus from sludge-amended soils and their transfer in runoff may lead to eutrophication of downstream surface water. The aim of this study is to establish and compare the effect of two different sludges on these transfers: an anaerobically digested and thermically stabilised sludge (Seine-Aval treatment plant, sludge no. 1), and a limed sludge (Saint-Quentin treatment plant, sludge no. 2). Experiments were performed on 12 sloping micro-plots (1 m × 1 m) submitted to sludge spreading and controlled rainfall simulation. Runoff water was sampled and analysed for concentrations in nitrogen species and phosphorus. Results show that spreading of sludge no. 1 increased both ammonium nitrogen (mean of 1.1 mg L^–1 N-NH₄ vs. 0.2 mg L^–1 N-NH₄ for control micro-plots) and particulate phosphorus concentrations (mean of 2 mg L^–1 P vs. 1.1 mg L^–1 P for control micro-plots) in runoff water. On the other hand, sludge no. 2 did not induce any significant effect on nutrient concentrations in runoff. These results are related to chemical composition and physical treatment of sludges. This study underlines the existence of a short-term risk of nutrient mobilisation by runoff after sludge spreading on soil, and the need to check precisely the impact of this practice on water quality.     

The prevalence of bacterial resistance in clinical, food, water and some environmental samples in Southwest Nigeria

The resistance pattern and mechanisms of bacterial isolates obtained from clinical origin, soil, industrial effluent, orange juice products and drinking water were studied using commonly used antibiotics. The microbial load of the water samples, industrial effluent and orange juice products were 1.0 × 10¹–2.25 × 10⁶, 2.15 × 10⁵, and 3.5 × 10⁴–2.15 × 10⁵ cfu mL^–1, respectively. The faecal coliform test revealed that only two out of twenty orange juice products had MPN of 2 and 20, the MPN of water ranged from 1–1800, while the effluent had MPN of 1800. The bacterial isolates that were isolated include E. coli, S. aureus, P. vulgaris, S. marcescens, S. pyogenes, B. cereus, B. subtilis, Micrococcus sp., Klebsiella sp., P. aeruginosa, and Enterobacter sp. Also, clinical and soil isolates of P. aeruginosa were used in the study. Among the eight antibiotics tested for resistance on five strains of each bacterium, seven different resistance patterns were observed among the bacterial isolates obtained from water, effluent and orange juice products. Among the clinical and soil isolates of P. aeruginosa, four multiple-drug resistance patterns were obtained. Thirty strains of E. coli and S. aureus were tested for -lactamase production and fourteen strains, seven each of E. coli and S. aureus that had high Minimum Inhibitory Concentration values (MIC) for both Amoxycillin and Cloxacillin were positive.     

Laboratory study of the emission of NO and N2O from some Belgian soils

The NO, NO₂ and N₂O emission was measured, upon application of nitrate, ammonium and both, to four Belgian soils with different characteristics. The addition of NH ₄ ⁺ caused higher NO and N₂O emissions than the addition of no nitrogen, or the addition of NO ₃ ^– . In contrast to the two soils with a pH of approximately 8 the two soils with a pH around 6 showed a considerable delay in production of both NO and N₂O upon the application of the ammonium, probably due to the lag-period of nitrification. The soils with a pH of 8 gave higher emissions on the application of NH ₄ ⁺ than the soils with a pH of 6. The emission of NO₂ was found to be considerably lower than the NO emission from the soils. The NO/NO₂ ratio varied between 5–25 at considerable NO emissions (>50 nmol kg^–1). In the controls of soil 1 and soil 2, which showed very low NO emissions ratios of <1 were observed. The N₂O/NO ratios varied between 5–20 when NO emissions were considerable (>50 nmol kg^–1). Soil 3 and 4 gave lower N₂O/NO ratios than soil 1 and 2. In the controls of soil 1 and soil 2, at low NO emissions, N₂O/NO ratios of >300 were observed. Soil 3 and 4 gave higher NO/NO₂ and lower N₂O/NO ratios than soil 1 and 2.     

Baseline Concentrations of Trace Elements in Surface Soils of the Torrelles and Sant Climent Municipal Districts (Catalonia,Spain)

An investigation was conducted to study the baseline levels of Ba, Cd, Cu, Cr, Ni, Pb, Sr, V and Zn (aqua regia-extractable) based on 51 representative soils of the Torrelles and Sant Climent Municipal Districts (Catalonia, Spain). The baseline concentrations of those elements were (mg kg⁻¹): Ba 73.9–617.9, Cr 9.2–120.2, Cu 4.0–111.6, Ni 6.1–118.6, Pb 5.6–217.5, Sr 19.6–128.8, V 12.1–101.2, and Zn 16.8–326.8, respectively.Forty-nine samples were reported as having less than the 0.67 mg kg⁻¹ detection limit for cadmiun and were therefore not useful for baseline determination; however, these results suggest that the baseline average is probably below 0.67 mg kg⁻¹.Upper baseline values for most of the elements corresponded with those reported in the literature, except for Pb and Zn, which were two to four times greater.Soil properties, including clay fraction, OC, CEC and pH_w were related to metal concentration using correlation and factorial analysis. R-mode factor analysis separates the soil analysis data into three factors. These factors explain 67.3% of the total variance, suggesting that metal concentration was controlled by soil composition.     

The influence of two culturing techniques on toxicity of four chemicals in Arabidopsis

Plots of Arabidopsis thaliana L. (Heynh.) plants were grown in two hydroponic systems, one using a solid rooting support media (vermiculite) and the other a flowing solution culture. Both were tested with various concentrations of bromacil (5-bromo-3-sec-butyl-6-methyluracil), dichlobenil (2,6-dichlorobenzonitrile), copper sulfate (CuSO₄·5H₂O) and 3-aminotriazole. The effects on biomass production were compared. Plants treated with bromacil at concentrations up to 0.05 mg l^–1 were similarly reduced in growth in both culture methods. However, the toxic effects of dichlobenil, copper sulfate and 3-aminotriazole were different for both culture methods. Dichlobenil decreased plant growth in the solution culture at lower concentrations than in the vermiculite system. All aspects of growth were suppressed in the solution culture while the vegetative weight was unaffected in the vermiculite culture. Plants treated with 20 mg l^–1 copper sulfate in solution culture yielded mean seed weight of 1.2 g/plot compared to 3.1 g/plot when treated with the same concentration in the double-plot system. Plants treated with 0.5 mg l^–1 3-aminotriazole in solution culture produced no seed, while plants with the same nominal concentration in the double-pot method produced a mean seed weight of 6.5 g/plot. Solution culture testing was generally more sensitive and since roots were bathed directly in a solution of known pH, nutrient level and chemical concentration, the test conditions were more accurately defined.     

Formation and Emission of N2O and CH4 from Compost Heaps of Organic Household Waster

Composting can be a source of N₂O andCH₄ production. In this investigation, differentcompost heaps of organic household waste weremonitored with the focus on potential formation ofCH₄ and N₂O in the heaps and emission ofthese gases from the heaps. The studied compost heapshad different compost ages, turning intervals andcompost sizes. The analysed compost gases containedbetween 1–3421 L of N₂O-N L^-1 and 0–470 mL of CH₄ L^-1. The emission rates ofN₂O and CH₄ from the compost heaps werebetween 1–1464 mg N₂O m^-2 day^-1 and0–119 000 mg CH₄ m^-2 day^-1. These verylarge differences in compost gas composition andemission indicate the importance of compostmanagement. The results also give an understanding ofwhere in the composting process an increasing emissionof N₂O and CH₄ can occur.     

Monitoring and assessment of soil and forage molybdenum near an atmospheric source

Forage and soil molybdenum (Mo) were measured in the vicinity of a Mo processing plant in southwestern Pennsylvania, USA. Molybdenum concentrations in red clover plants (Trifolium pratense L.), measured at 23 sites, ranged from 1.1 to 56.6 mg kg^–1. Fourteen of the 23 sites sampled had red clover plants with Mo concentrations over the threshold value of 6 mg kg^–1. Red clover Cu:Mo concentration ratios were below the recommended ratio of 4 in 19 of the sites. The low Cu:Mo values, along with high plant Mo concentrations, indicates that there is a potential risk of molybdenosis in ruminant animals in this area. Acid digested (sorbed) soil Mo concentrations, measured at 30 sites, ranged from 7.0 (background level) to 131 mg kg^–1. Using the Baker Soil Test (BST) extract, molybdenum soil concentrations ranged from 0.01 to 3.99 mg kg^–1. Regression equations were developed to predict plant uptake of soil Mo based on the red clover plant, soil extracts and soil pH data. The R-squared values for predicting plant uptake were 81.9% for the BST extract and 81.6% for the acid digestion extract plus soil pH. Based on the above results, a protocol has been implemented for assessing the risk of high soil Mo near this Mo processing plant.     

Three-year monitoring results of nitrate and ammonium wet deposition in Thailand

Wet deposition is one of the important sources of nitrogen input into the ecosystem. It also contributes to rain acidity in some environments. In this study we reported the annual as well as seasonal trends of nitrogen wet deposition at three locations in Thailand: Bangkok, Chiang Mai and Nan. Comparison of nitrogen wet deposition between in rural and in the urban areas was also made. Daily rainfall was measured and monthly rainwater was collected for nitrogen analysis during 1999–2002. The average NO₃ ^– concentration in rainwater collected from the rural sites (60 km from urban area) was around 0.2–0.3 mg L^–1, while that from the urban areas of Chiang Mai and Nan cities it was 0.4–0.5 mg L^–1. NH₄ ⁺ concentration in rainwater showed the similar ranges to that of NO₃ ^– , except at Nan where concentration was not significantly different between the urban and rural sites. On the other hand, the average concentrations of NO₃ ^– were higher at Bangkok site than other sites, while concentration of NH₄ ⁺ was almost the same between Chiang Mai and Bangkok. Wet deposition of NO₃ ^– at the rural sites of Chiang Mai and Nan ranged from 2.1 to 3.2 kg N ha^–1 yr^–1, while at the urban sites this ranged from about 6 kg N ha^–1 yr^–1 in Chiang Mai and Nan Cities to 8.6 kg N ha^–1 yr^–1 in Bangkok. Wet deposition of NH₄ ⁺ at the rural sites of Chiang Mai and Nan was about 2.4 to 3.6 kg N ha^–1 yr^–1 and at the urban sites of Chiang Mai, Nan and Bangkok this was 7.7, 4.9 and 8.1 kg N ha^–1 yr^–1, respectively. Thus, it was concluded that wet deposition of both nitrogen species was significantly higher at the urban sites than at the rural sites.     

A modified toxicity testing method using tropical marine microalgae

Toxicity testing of four heavy metals(Cd, Cu, Mn and As) using four species of tropicalmarine phytoplankton, Chaetoceros calcitrans, Isochrysis galbana, Tetraselmis tetrahele and Tetraselmis sp., was carried out in multiwellplates with test volumes of 2 mL and the resultscompared to those of standard, large volume,shake-flasks. IC₅₀ values (concentrations of metalsestimated to inhibit 50% growth relative to thecontrol) were determined after 96 hours based onautomated O.D. readings measured in Elisa microplatesby a Multiskan spectrophotometer. Good agreement wasachieved between O.D. readings and cell countsindicating that this new method is a simple,economical, practical and rapid technique for toxicitytesting, and provides good reproducibility of IC₅₀ values. Results of the toxicity testsindicate that Cu was the most toxic metal (averageIC₅₀ values ranging from 0.04 to 0.37 mg L^-1), followed by Cd (0.06–5.7 mg L^-1), Mn (7.2–21.4 mg L^-1) and As (33.9–319.3 mg L^-1).Test species had different degrees of sensitivity tothe metals tested, with I.galbana and C. calcitrans the mostsensitive to Cu, Cd and Mn. Based on these findingsit is recommended that the existing Malaysian InterimStandards for Marine Water Quality for Cd and Cu be reviewed.     

Detection of sulphur dioxide in the air using Scotch pine needles

Air quality is especially important in surface layers, for it is this layer that provides the living components of environment with the needed oxygen and carbon dioxide. Various air polluting gases penetrate cells affecting and contaminating them. Chloroplast shell of some pine species, for instance, doubles under the impact of carbon dioxide which is followed by tillacoids swelling and reduction.Literature provides opinions of some authors, who consider Scotch pine needle to be a biological indicator of sulphur dioxide. Others object to it basing on the observations of physiological development.The property of a Scotch pine as that of biological indicator manifests in SO₂ absorption by its needles. The analysis of total content of SO₂ in the needles shows an increase of SO₂ concentration.Sulphur in the needles is found in the form of organically bound sulphur, aminoacids, hormones as well as in the form of sulphates.Basing on our previous analysis we have generalized the data on the correlation concentrations of sulphur dioxide in the air and general concentrations of sulphur in the needles. We have supplemented the observations with the analyses of organically bound sulphur and concentrations of nonorganic sulphur. According to research data, needles contain a characteristic and rather stable quantity of organically bound sulphur.So we may state that the SO _inf4 ^sup2– concentration and the amount of SO₂ absorbed from the air are interdependent.Some authors state that SO _inf4 ^sup2– content in the soil doesn't affect sulphur content in pine needles. That is why we studied the affect of SO _inf4 ^sup2– content in the soil on sulphur content in Scotch pine needles.We could prove this statement by means of various kinds of analyses only partially. The ion transport is affected by the presence of other ions, pH and a lot of other factors.What may be said for sure is that different qualities of soils gave only minor and insignificant deviations.Hence our assumption about the SO₂ contamination from air, proved by its effect on the soils, turns to suit approximate measurements.     

Quality of drinking water in the Aligarh Muslim University Campus,Aligarh, U.P. (India) with respect to heavy metals

The physico-chemical characteristics of the drinking water in nine residential halls of the Aligarh Muslim University, Aligarh, U.P. (India), were studied. Nine samples each of running and standing water were taken four times over a period of one month at weekly intervals from all of the residential halls and were analysed for physico-chemical characteristics and heavy metal contents. The temperature, pH and electrical conductivity of water samples ranged between 20.0–26.0°C; 7.00–8.00 and 116.00–199.04 micromhos cm^–1 respectively whereas the values of total alkalinity, total hardness, Cl^–, SO ₄ ^– , F^–, NH₃–N, NO₂–N; NO₃–N were found between 261.00–396.00; 128.00–200.00; 8.00–69.00; 12.00–46.00; 0.90–1.35; 0.20–0.44; ND; 1.60–6.50 mg l^–1 respectively. The ranges of heavy metal concentrations in the running water samples were as follows: Cd (0.70–3.75); Cr (ND-5.00); Co (9.50–18.75); Cu (0.75–15.00); Fe (ND-13.50); Mn (3.50–51.00); Ni (7.00–17.50); Pb (0.50–2.50) and Zn (10.00–176.50) g l^–1. The heavy metal concentrations in standing water samples were found to be: Cd (1.20–4.90); Cr (ND-10.00); Co (10.25–19.00); Cu (1.75–20.00); Fe (ND-18.00); Mn (5.00–66.50); Ni (8.75–19.75); Pb (0.75–5.50) and Zn (28.60–364.00) g l^–1. The concentrations of heavy metals in drinking water supplies of the Aligarh Muslim University campus were well below the guidelines for drinking water quality as prescribed by World Health Organisation (1984). It is evident from the results that the drinking water may not cause any significant health hazard to water consumers due to heavy metals but these may be hazardous if they get accumulated in the body due to continuous consumption of water.     

Acid precipitation-related chemical trends in 18 rivers of atlantic Canada — 1983 to 1992

Using non-parametric techniques, we studied water chemistry changes from 1983 to 1992 in 18 rivers located at the extreme northeastern portion of North America. This period was marked by a decrease in sulfate (SO ₄ ^– ) production in eastern Canada from 1982 to 1986, followed by a levelling off from 1986 to 1992. Nitrate (NO ₃ ^– ) production and deposition generally increased over this whole period. We used two time windows, 1983 to 1989 and 1983 to 1992, to determine if changes in river acidification variables occurred over the ten year period. We found significant trends of increasing pH and acid neutralization capacity (ANC) concentrations at eight sites using both time windows, while SO ₄ ^–2 increased at five and seven sites during the same two time periods. Nitrate concentrations showed few consistent trends, while base cations showed increases in the earlier part of the data set and total organic carbon (TOC) showed long-term decreases. There were few significant trends in hydrogen (H⁺), and a slight decrease in SO ₄ ^–2 exports as opposed to increased concentrations over the same period. We attribute the discrepancy between SO ₄ ^–2 concentration and export trends to be due to evapotranspiration in the basins, causing a concentration of ions in water. Nitrate and calcium exports showed no trends, while TOC decreased at four or five sites, depending on the time window used. Longer data sets tended to produce more detectable trends. Overall, water chemistry in the region is showing the effects of reduced SO ₄ ^– loads and is not yet being affected by the increases in NO ₃ ^– deposition.     

Cyanobacterial Flora from Polluted Marine Shores

Citation of cyanobacterial cultures from the shores of south west coast of Gujarat, India and their relationship with sea water quality, influenced by extensive pollutant runoff is reported in this study. Intensity of pollution was evaluated by physico-chemical analysis of water. Higher load of suspended solids (60–1000 mg l⁻¹) and nutrients (PO₄ ⁻P: 1.3–4 μmole l⁻¹ and NO₃ ⁻N: 12.5–17.8 μmole l⁻¹) were persistent throughout the analysis. Community structure is seen to be influenced by such persistent pollution. Twenty nine cyanobacterial species were isolated belonging to 9 genera of 4 families, with an elevated occurrence of Oscillatoria and Lyngbya species. No heterocystous cyanobacteria were isolated throughout the study.     

Evaluating the Applicability of Regulatory Leaching Tests for Assessing Lead Leachability in Contaminated Shooting Range Soils

The toxicity characteristic leaching procedure (TCLP) is the current US-EPA standard protocol to evaluate metal leachability in wastes and contaminated soils. However, application of TCLP to assess lead (Pb) leachability from contaminated shooting range soils may be questionable. This study determined Pb leachability in the range soils using TCLP and another US-EPA regulatory leaching method, synthetic precipitation leaching procedure (SPLP). Possible mechanisms that are responsible for Pb leaching in each leaching protocol were elucidated via X-ray diffraction (XRD). Soil samples were collected from the backstop berms at four shooting ranges, with Pb concentrations ranging from 5,000 to 60,600 mg kg⁻¹ soil. Lead concentrations in the TCLP leachates were from 3 to 350 mg l⁻¹, with all but one soil exceeding the USEPA non-hazardous waste disposal limit of 5 mg l⁻¹. However, continued dissolution of metallic Pb particles from spent Pb bullets and its re-precipitation as cerussite (PbCO₃) prevented the TCLP extraction from reaching equilibrium at the end of the standard leaching period (18 h). Thus, the standard one-point TCLP test would either over- or under-estimate Pb leachability in shooting range soils. Lead concentration in the SPLP leachates ranged from 0.021 to 2.6 mg l⁻¹, with all soils above the USEPA regulatory limit of 0.015 mg l⁻¹. In contrast to TCLP, SPLP leaching had reached equilibrium, with regard to both pH and Pb concentrations, within the standard 18 h leaching period, and the analytical SPLP results were in good agreement with those derived from modeling. Thus, we concluded that SPLP is a more appropriate alternative than TCLP for assessing lead leachability in range soils.     

Regional monitoring of lead and cadmium contamination in a tropical grazing land site,Thailand

An investigation was carried out to monitor Pb and Cd contamination in grazing land located near a highway. Environmental media at different distances fromhighway (soil, grass, water, cow's forage, fertilizer,manure and milk samples) were collected from three samplinglocations. Soil and grass were characterized by high metalmobility (soil with Pb: 5.25±0.71–14.59±1.17 mgkg^-1, dry mass and Cd: 0.038–0.33±0.04 mg kg^-1, dry mass and grass with Pb: 0.76±0.05–6.62±0.18 mg kg^-1, dry mass and Cd: 0.17±0.01–0.73±0.09 mg kg^-1, dry mass). One-way analysis of variane (ANOVA) was applied to find out the correlation between metal (total and bioavailable) concentrationsin the soil and the distance from roadside. In most cases, the finding showed that plants growing nearer to the highway are usually exposed to more heavy metal accumulations than those awayfrom the highway. In addition, a correlation was established between plant available metal concentrations and plant metaluptake concentrations.Analysis of fertilizer and manure showed considerable amountof metals (fertilizer with Pb: 1.53±0.06 mg kg^-1 andCd: 0.038 mg kg^-1 and manure with Pb: 2.55–3.34 mgkg^-1 and Cd: 0.14–0.31 mg kg^-1). Long termsimultaneous application of fertilizer and manure on thecommercial farm showed higher metal accumulation in the soiland plants than those of co-operative farm Considerableconcentrations of metals (Pb: 1.60–2.94 mg kg^-1 andCd: 0.025–0.19 mg kg^-1) were observed in fodder. The finding clearly demonstrated that there are seasonalvariation in total daily metal intake by individual cow (Pb:109.37 mg day^-1 (dry), 273.47 mg day^-1 (rainy) andCd: 2.02 mg day^-1 (dry), 19.62 mg day^-1 (rainy)).The provisional tolerable weekly intake of heavy metals incows is 390 g Pb and 28 g Cd per kg bodyweight in the rainy season and 156 g Pb and 2 gCd per kg body weight in the dry season. The levels of metals (Pb: 0.014 mg L^-1 and Cd: not detectable) and bio-transferfactor (10^-5–10^-4) in raw milk were found to be well below the Codex Alimentarius Commissions Draft (1997). Ouranalysis revealed that improvements on farm management give significant reduction in elevated levels of Pb and Cdin soil and plants, and however leads to minimize the amountof Pb and Cd in consumed milk.     

EFFICIENCY OF AN INFILTRATION BASIN IN REMOVING CONTAMINANTS FROM URBAN STORMWATER

The efficiency of a Stormwater Infiltration Basin (SIB) to remove contaminants from urban stormwater was assessed in the current investigation. The SIB, installed in an urban suburb in eastern Sydney (Australia), was monitored over seven rainfall events to assess the removal efficiency of the remedial device for total suspended solids (TSS), nutrients (TP, TKN, N_ox, TN), trace metals (Cd, Cr, Cu, Fe, Mn, Ni, Pb, Zn), organochlorine pesticides and faecal coliforms (FC) from stormwater. The weighted average concentration (WAC) of TSS in the stormwater effluent from the SIB was reduced by an average of 50%, whereas the WAC of Cu, Pb and Zn were also reduced by an average 68%, 93% and 52%, respectively. However, the WAC of Cr, Fe, Mn and Ni displays either similar concentrations as the stormwater influent (Cr and Mn), or substantially higher concentrations (Fe and Ni), due possibly to leaching of fine-grained zeolite clay particles in the filtration bed. The mean removal efficiency of the SIB for total phosphorus (TP) and total Kjeldahl nitrogen (TKN) was 51% and 65%, respectively. In contrast, the average WAC of oxidisable nitrogen (nitrate and nitrite nitrogen or N_ox) is about 2.5 times greater in the effluent (1.34 ± 0.69 mg L^–1) than in the incoming stormwater (0.62 ± 0.25 mg L^–1). The WAC of total nitrogen (TN) was similar for stormwater at the in-flow and out-flow points. The SIB was very efficient in removing FC from stormwater; and the WAC of almost 70 (100 mL)^–1 at inflow was reduced to <2000 cfu (100 Ml)^–1 at the outflow, representing a mean removal efficiency of 96%. Due to the low concentrations of Cd, organochlorine pesticides and PAHs in the stormwater, it was not possible to assess the efficiency of the SIB in removing these contaminants.     

Temporal variability in water quality parameters—a case study of drinking water reservoir in Florida, USA

Our objective was to evaluate changes in water quality parameters during 1983–2007 in a subtropical drinking water reservoir (area: 7 km²) located in Lake Manatee Watershed (area: 338 km²) in Florida, USA. Most water quality parameters (color, turbidity, Secchi depth, pH, EC, dissolved oxygen, total alkalinity, cations, anions, and lead) were below the Florida potable water standards. Concentrations of copper exceeded the potable water standard of <30 μg?l^?1 in about half of the samples. About 75 % of total N in lake was organic N (0.93 mg?l^?1) with the remainder (25 %) as inorganic N (NH₃-N: 0.19, NO₃-N: 0.17 mg?l^?1), while 86 % of total P was orthophosphate. Mean total N/P was <6:1 indicating N limitation in the lake. Mean monthly concentration of chlorophyll-a was much lower than the EPA water quality threshold of 20 μg?l^?1. Concentrations of total N showed significant increase from 1983 to 1994 and a decrease from 1997 to 2007. Total P showed significant increase during 1983–2007. Mean concentrations of total N (n?=?215; 1.24 mg?l^?1) were lower, and total P (n?=?286; 0.26 mg?l^?1) was much higher than the EPA numeric criteria of 1.27 mg total N l^?1 and 0.05 mg total P l^?1 for Florida’s colored lakes, respectively. Seasonal trends were observed for many water quality parameters where concentrations were typically elevated during wet months (June–September). Results suggest that reducing transport of organic N may be one potential option to protect water quality in this drinking water reservoir.     

Monitoring and Assessment of Exhaust Emission in Bangkok Street Air

Measurement of the exhaust emission from gasoline-powered motor vehicles in Bangkok were performed on chassis dynamometer. A fleet of 10 vehicles of different model, years and manufacturers were selected to measure the air pollutants in the exhaust effluent. The study revealed that the carbon monoxide and hydrocarbon emissions averaged 32.3–64.2 and 1.82–2.98 g km^–1, respectively, for 1990–1992 cars and decreased to 17.8–40.71 and 0.75–1.88 g km^–1, respectively, for 1994–1995 cars. A monitoring program for air pollutant concentrations in ambient air was also conducted to evaluate the air pollution problems in Bangkok arising from vehicle exhaust emission. Four air sampling stations were strategically established to cover the Bangkok Metropolitan Region (BMR). Composite air samples in this study area were collected during the day/night times and weekday/weekend. The average concentrations of suspended particulate matter, carbon monoxide, and nitrogen dioxide in Bangkok street air were found to be 0.65 mg/m³ (24 hr ave.), 19.02 mg/m³ (8 hr ave.) and 0.021 mg/m³ (1 hr ave.), respectively. The average concentrations of benzene and toluene in the ambient air of the study area were found to be 15.07–50.20 and 25.76–130.95 g/mf³, respectively, for 8 hr average. These results indicated that there was a significant increase in air pollutant emissions with increasing car mileage and model year. Subsequent analysis of data showed that there were only 20% of the test vehicles complied to approved emission standard. The finding also revealed that there was a correlation between the average air pollutant concentrations with average traffic speed in each traffic zone of the Bangkok Metropolitan Region (BMR).