Volatile metabolites from microorganisms grown on humid building materials and synthetic media

Growth of different microorganisms is often related to dampness in buildings. Both fungi and bacteria produce complicated mixtures of volatile organic compounds that include hydrocarbons, alcohols, ketones, sulfur- and nitrogen-containing compounds etc. Microbially produced substances are one possible explanation of odour problems and negative health effects in buildings affected by microbial growth. A mixture of five fungi, Aspergillus versicolor, Fusarium culmorum, Penicillium chrysogenum, Ulocladium botrytis and Wallemia sebi were grown on three different humid building materials (pinewood, particle board and gypsum board) and on one synthetic medium. Six different sampling methods were used, to be able to collect both non-reactive volatile organic compounds and reactive compounds such as volatile amines, aldehydes and carboxylic acids. Analysis was performed using gas chromatography, high-performance liquid chromatography and ion chromatography, mass spectrometry was used for identification of compounds. The main microbially produced metabolites found on pinewood were ketones (e.g. 2-heptanone) and alcohols (e.g. 2-methyl-1-propanol). Some of these compounds were also found on particle board, gypsum board and the synthetic medium, but there were more differences than similarities between the materials. For example, dimethoxymethane and 1,3,5-trioxepane and some nitrogen containing compounds were found only on particle board. The metabolite production on gypsum board was very low, although some terpenes (e.g. 3-carene) could be identified as fungal metabolites. On all materials, except gypsum board, the emission of aldehydes decreased during microbial growth. No low molecular weight carboxylic acids were identified.     

Remediation of mould damaged building materials--efficiency of a broad spectrum of treatments

We compared the efficiency of some commercially available products and methods used for remediation of mould-contaminated building materials. Samples of gypsum board and pinewood were artificially contaminated with toxin-producing isolates of Stachybotrys chartarum and Aspergillus versicolor, respectively, then, ten different remediation treatments were applied according to the manufacturers' instructions. Microbial and chemical analyses of the infested materials were carried out both immediately before and after treatment, after six weeks of drying at room temperature, and after another six weeks of remoistening. The aim of the study was to determine whether the investigated methods could inhibit the mould growth and destroy some selected mycotoxins produced by the moulds. None of the decontamination methods tested could completely eliminate viable moulds. Some methods, especially boron based chemicals, ammonium based chemicals, and oxidation reduced the contents of mycotoxins produced by S. chartarum (satratoxin G and H, verrucarol), whereas the one which uses an ammonium based chemical reduced the amount of sterigmatocystin produced by A. versicolor with statistical significance. No remediation treatment eliminated all the toxins from the damaged materials. These results emphasize the importance to work preventively with moisture safety throughout the construction processes and management to prevent mould growth on building materials.     

燃煤电厂石膏雨污染排放实测

对上海市8台燃煤机组开展了石膏雨和相关污染物排放监测,考察部分燃煤电厂石膏雨排放对周边居民生活和电厂生产造成的影响。结果表明,采用GGH并加热到一定温度,同时对除雾器进行优化的机组烟尘和可凝结颗粒物浓度均较低,石膏雨沉降和液滴均未检出,无冷凝回流液;虽然装有湿式电除尘器和GGH的机组石膏雨沉降未检出,但液滴浓度较高;仅装有湿式电除尘器的2台机组中1台检出石膏雨沉降;对照机组石膏雨沉降和液滴浓度均较高。建议电厂提升排烟温度,同时采取措施消除烟气中石膏夹带,彻底消除石膏雨,在标准制定时应充分考虑目前燃煤电厂多种污染物排放情况及其对环境的影响,尤其是石膏雨和可凝结颗粒物,制定相应的监测方法和评价体系,将其纳入火电厂排放标准中。     

Determination of selected microbial volatile organic compounds by diffusive sampling and dual-column capillary GC-FID--a new feasible approach for the detection of an exposure to indoor mould fungi?

A new, analytically valid procedure is described to assess the exposure of human beings to the so-called microbial volatile organic compounds (MVOCs) in air. The method can be used routinely for large sample numbers and is especially valuable as a basis for further research on the correlation between single MVOCs and indoor mould growth. The procedure is based on the fact that fungi produce a variety of volatile organic compounds, such as 3-methylbutan-1-ol, 3-methylbutan-2-ol, fenchone, heptan-2-one, hexan-2-one, octan-3-one, octan-3-ol, pentan-2-ol, alpha-terpineol, and thujopsene, which they emit into the indoor environment. Using diffusive samplers, these MVOCs are adsorbed onto charcoal during a sampling interval of four weeks. The described method is thus superior to existing methods which use short-term active sampling. After desorption with carbon disulfide, the MVOCs were determined by dual-column gas chromatography with flame ionization detection using the large-volume injection technique for sample introduction. The detection limits ranged between 0.15 and 0.53 microgram m-3, within-series precision was found to range between 6.5 and 19.0%, and recovery was between 77 and 118%. The procedure has been successfully applied in the context of a large field study to measure the indoor MVOC exposure in children's rooms of 132 dwellings. The objective of the study was to examine the relation between indoor mould growth, the indoor MVOC exposure and the prevalence of adverse health effects. Information about mould formation has been obtained by a questionnaire and by the determination of colony forming units of mould fungi in mattress dust. With the exception of 3-methylbutan-2-ol, fenchone, nonan-2-one, octan-2-one, and thujopsene, indoor air concentrations of all MVOCs under investigation were significantly higher inside damp and mouldy dwellings. From the primary MVOCs under investigation, 3-methylbutan-1-ol, hexan-2-one, heptan-2-one, and octan-3-ol were found to be most reliable indicators for mould formation. A correlation was also found between selected MVOCs and the occurrence of mould species in mattress dust. Aspergillus sp. correlated with heptan-2-one, hexan-2-one, octan-3-ol, octan-3-one, and alpha-terpineol, while the occurrence of Eurotium sp. was correlated with higher indoor air concentrations of 3-methylbutan-1-ol, 3-methylbutan-2-ol, heptan-2-one, hexan-2-one, octan-3-ol, and thujopsene. Children living in dwellings with elevated MVOC levels had a higher prevalence of asthma, hay fever, wheezing, and irritations of the eyes. These positive associations persisted after controlling for confounding factors such as age, sex, body-mass index, number of siblings, social status, passive smoking, type of heating, and ventilation habits. However, they were not statistically significant. This lack of significance may be a result of the small number of investigated samples.     

Chemical Compositions and Sources of Organic Matter in Fine Particles of Soils and Sands from the Vicinity of Kuwait City

Fine particles in the atmosphere from soil and sand resuspension contain a variety of organic compounds from natural biogenic and anthropogenic matter. Soil and sand samples from various sites near Kuwait city were collected, sieved to retain the fine particles, and extracted with a mixture of dichloromethane and methanol. The extracts were derivatized and analyzed by gas chromatography-mass spectrometry in order to characterize the chemical compositions and sources of the organic components. The major inputs of organic compounds were from both natural biogenic and anthropogenic sources in these samples. Vegetation was the major natural source of organic compounds and included n-alkanols, n-alkanoic acids, n-alkanes, sterols and triterpenoids. Saccharides had high concentrations (31–43%) in the sand dune and seafront samples, indicating sources from decomposed vegation materials and/or the presence of viable microbiota such as bacteria and fungi. Vehicular emission products, leakage of lubricating oils, discarded plastics and emissions from cooking operations were the major anthropogenic inputs in the samples from the urban areas. This input was mainly UCM, n-alkanes, hopanes, plasticizers and cholesterol, respectively.     

大气污染源低浓度二氧化硫监测方法比较

燃煤电厂烟气脱硫大多采用湿法脱硫原理,导致脱硫尾部烟气排放温度低、湿度高、二氧化硫浓度低,现有的二氧化硫监测采样系统和仪器无法准确测定其排放浓度。通过对不同方法和仪器的对比实验,确定了适合在低温、高湿、低二氧化硫排气情况下的采样分析方法。     

Airborne enzyme measurements to detect indoor mould exposure

Mould in buildings constitutes a threat to health. Present methods to determine the moulds comprise counting of spores or determination of viable moulds which give imprecise measures of total mould cell biomass. Analysis of ergosterol and β-glucan as markers of mould cell biomass is expensive and cumbersome. To evaluate if airborne enzyme activity was related to mould in buildings air samples were taken using an impinger technique or cellulose filters in 386 rooms in 141 buildings. The samples were analysed for the activity of N-acetylhexosaminidase (NAHA) and expressed as enzyme units per m(3) (EU per m(3)). The highest value found in a building was used for the classification of the building and was related to the results from the subsequent technical inspection. In buildings without mould damage, the NAHA activity was generally below 20 EU per m(3). In buildings with mould damage, almost all the buildings had activities above 20 EU per m(3) (specificity 85%). At 30 EU per m(3) the specificity was 100%. Measurements of airborne enzyme activity have a high sensitivity and specificity to identify buildings with mould problems. The method can be used in the investigations of building related symptoms or for home exposure characteristics when investigating diseases such as asthma that can be related to mould exposure.     

Comparison of collection efficiencies of sampling methods for removable beryllium surface contamination

The primary goal of this study is to compare wet versus dry sampling methods for three different media, (Whatman 41 filter papers, GhostWipes, and SKC Smear Tabs), These media were selected because they are the most commonly used means for the collection of beryllium from contaminated surfaces within the DOE Complex. A range of known concentrations of beryllium was introduced onto a smooth nonporous surface. All three types of media were tested for collection efficiency in both the wet and dry mode and analyzed by inductively-coupled plasma atomic emission spectrometry (ICP-AES).     

Application of HS-SPME in the determination of potentially toxic organic compounds emitted from resin-based dental materials

Leaching of volatile substances from resin-based dental materials may have a potential impact on the biocompatibility as well as safety of these materials. Information from manufacturers on ingredients in the materials is very often incomplete. Patients and dentists may be in contact with components emitted from cured dental fillings or from substrates applied in their preparation. Therefore, determination of the components of these materials is necessary for better prevention from possible harmful effects caused by dental fillings. The aim of this work was the isolation and identification of organic compounds evolved from four commercial resin-modified glass-ionomer cements (resin-based dental materials applied in dentistry) by using an alternative method of volatile compounds analysis-HS-SPME (headspace-solid phase microextraction). Dental materials were heated in closed vial at various temperatures and volatile substances released into the headspace phase above the sample were isolated on a thin polymeric fibre placed in SPME syringe. Identification was performed by using the GC-MS (gas chromatography-mass spectrometry) technique. Almost 50 RMGIC (resin-modified glass-ionomer cement) components (monomers and additives) were identified. The main identified leachables were: iodobenzene (DPICls-diphenyliodonium chloride degradation product), camphorquinone (photo-initiator), tert-butyl-p-hydroxyanisole (inhibitor), 4-(dimethylamino)ethyl benzoate (co-initiator), ethylene glycol dimethacrylate (monomer).     

Retrospective monitoring of synthetic musk compounds in aquatic biota from German rivers and coastal areas

The polycyclic musk compounds HHCB (Galaxolide) and AHTN (Tonalide) are commonly used as synthetic fragrances in personal care products and household cleaners. These and other synthetic musk fragrances were quantified in different aquatic samples from the German Environmental Specimen Bank (ESB). While HHCB and AHTN were found in almost all samples, most of the other musk fragrances were detected only in a few samples and mostly at lower concentration levels. Blue mussels from the North Sea showed varying levels of 0.5-1.7 ng g(-1) ww for HHCB and 0.4-2.5 ng g(-1) ww for AHTN (ww, wet weight) in the period from 1986 to 2000, while blue mussels from the Baltic Sea were only slightly contaminated with synthetic musk fragrances. Lipid weight-related concentrations of synthetic musk compounds in blue mussels were higher than in eelpout muscles, bladder wrack and herring gull eggs. In comparison to the marine specimens, muscles of bream from German rivers had higher concentrations of HHCB and AHTN. The ranges of HHCB and AHTN concentrations in bream from the Elbe River were 545-6400 ng g(-1) lw and 48-2130 ng g(-1) lw, respectively (lw, lipid weight; five sampling sites, period 1993-2003). In the Rhine River, HHCB and AHTN levels of bream muscles were highest at the Iffezheim site (up to 9750 ng g(-1) lw HHCB, 1998). Even higher synthetic musk levels were detected in bream from the rivers Saale and Saar. In recent years, levels of both compounds determined in bream from most sampling sites have decreased from maximum values in the 1990s. As the concentrations of AHTN have decreased faster, the ratio of HHCB to AHTN increased from 2-4 in the 1990s to 10-20 in recent years.     

Measurements of biogenic hydrocarbons and carbonyl compounds emitted by trees from temperate warm Atlantic rainforest, Brazil

This study is part of a three-year project on biogenic volatile organic compound (VOC) emissions from trees of the temperate warm Atlantic rainforest found in the metropolitan area of Sao Paulo City (MASP). No study of VOC emission rates from plant species has been carried out in the temperate warm Atlantic rainforest of Brazil prior to this work. Eleven species were selected (Alchornea sidifolia, Cupania oblongifolia, Cecropia pachystachia, Syagrus romanzoffiana, Casearia sylvestris, Machaerium villosum, Trema micrantha, Croton floribundus, Myrcia rostrata, Solanum erianthum and Ficus insipida) and some of them were studied in urban, sub-urban and forest areas inside the MASP in order to evaluate biogenic VOC composition at sites characterized by different emission sources. Biogenic VOC emissions were determined by placing branches of plants in a dynamic enclosure system, an all-Teflon cuvette, and by sampling the compounds in the air leaving the cuvette. Pre-concentration using adsorbents to retain the VOC, followed by GC-MS after thermal desorption of the sample, was employed to determine the amount of biogenic hydrocarbons. The collection of carbonyl compounds on a 2,4-dinitrophenylhydrazine coated silica followed by HPLC-UV was used to analyze low molecular weight carbonyl compounds. Emission rates of isoprene, alpha-pinene, camphene and limonene ranged from 0.01 to 2.16 microg C h(-1) g(-1) and emission rates of aldehydes (C(2)-C(6)), acrolein, methacrolein and 2-butanone ranged from 1.5 x 10(-2) to 2.3 micro g C h(-1) g (-1). Ambient and leaf temperatures, relative humidity, light intensity, O(3) and NO(x) levels in the local atmosphere were monitored during experiments. It was possible to identify different biogenic VOCs emitted from typical plants of temperate warm Atlantic rainforest. The emission rates were reported as a function of the type of site investigated and were only provided for compounds for which quantification was feasible. Other biogenic compounds were only identified.     

镀金石英砂吸附-AMA 254测汞仪测定大气中痕量汞的研究

采用镀金石英砂来富集大气中的气态总汞,AMA 254测汞仪测定。结果表明,不同采样时间下的单级吸附管的吸附效率均在90%以上,采样40min时的相对标准偏差为5%左右。与巯基棉吸附和吸收液吸收方法的对比显示,该方法具有吸收效果好、多次采样的精密度高、操作简便并且可以再生重复使用等优点。运用该法,对徐家汇等几个地点的大气总汞进行了测定。     

Determination of isocyanic acid in air

A method is presented for the determination of isocyanic acid (ICA), HNCO, in air samples as a di-n-butylamine (DBA) derivative. The method is based on sampling in midget impinger flasks containing 10 ml of 0.01 mol l-1 DBA in toluene. Quantification was made using liquid chromatography (LC) and electrospray mass spectrometry (MS) monitoring positive ions. The instrumental detection limit for the LC-MS was 10 fmol of ICA-DBA. ICA was generated by thermal decomposition of urea. A standard solution containing the DBA derivatives of ICA was prepared by collecting the emitted ICA in an impinger flask containing DBA. ICA in the reference solution was characterised by LC and time-of-flight (TOF) MS and quantified by LC chemiluminescent nitrogen detection (LC-CLND). The instrumental detection limit for the LC-CLND was 1 ng of nitrogen. ICA was emitted during thermal degradation of PFU resins and polyurethane (PUR) lacquers, from car metal sheets. ICA was the most dominant isocyanate and in PUR coating up to 8% of the total weight was emitted as ICA and for PFU resins up to 14% was emitted as ICA. When air samples were collected in an iron foundry during casting in sand moulds with furan resins, concentrations of ICA in the range 50-700 micrograms m-3 were found in the working atmosphere.     

The influence of denture cleansers on the release of organic compounds from soft lining materials

Biocompatibility constitutes the most fundamental requirement with respect to all dental materials to be applied within the oral cavity. In its environment, various toxic compounds may be released by dental materials which pose potential threats to the patient's health. Due to the fact that dentures remain in the oral cavity for a very long time, a detailed examination and verification of prosthetic materials with a view to their toxicity seems to be essential. By using very sensitive measurement techniques such as gas chromatography, one may determine which compounds are released by these materials. The aim of this paper was to determine the influence of various denture cleansers on the release of organic compounds from four soft dental materials used in prosthetics for lining dentures. These materials when placed in commonly used disinfectants (Corega Tabs, sodium hypochlorite, chlorhexidine, hydrogen peroxide), as well as in artificial saliva, produced 13 chemical compounds such as monomers (methyl methacrylate, ethyl methacrylate, dodecyl methacrylate), plasticizers (dibutyl phthalate, diethyl phthalate, tributyl acetylcitrate) and others (e.g. benzophenone). A comparison of chemical compounds released from acrylic-based materials and those released from silica-based materials demonstrated that acrylic-based materials are less resistant to disinfectants.     

湿法脱硫后高湿烟气中SO3酸雾监测方法研究

利用三氧化硫(SO3)发生装置以及模拟烟气湿法脱硫系统,研究了烟气再热温度、恒温水浴温度、采样速率、冷凝管类型规格及吸收瓶个数等不同采样参数对SO3酸雾采集率的影响。结果表明,当烟气再热温度低于烟气酸露点时会导致SO3酸雾收集率下降,采用控制冷凝法采样时应使用大流量(10L/min)采样,冷凝管应选择外套长度为400 mm的蛇形螺旋冷凝管,并将冷凝管置于温度为65℃左右的恒温水浴中;用碱液吸收法采样时应串联3个吸收瓶后,使用小流量(1L/min)采样。烟气温湿度、二氧化硫(SO2)浓度以及烟气中共存组分等对碱性吸收法的采集影响较大,而对控制冷凝法几乎没有影响。因此确立了针对湿法脱硫后高湿烟气环境下SO3酸雾的监测方法为控制冷凝法更为适宜。     

Vacuum sampling techniques for industrial hygienists, with emphasis on beryllium dust sampling

The U.S. Department of Energy (DOE) Chronic Beryllium Disease Prevention Program Rule, 10 CFR Part 850 became effective in 2000 in response to the prevalence of Chronic Beryllium Disease (CBD) in workers. The rule requires surface and air monitoring for beryllium to determine exposure levels and the evaluation of the effectiveness of controls used to minimize or eliminate that risk. The most common methods for surface sampling use wet or dry wipes. Wipe sampling techniques may be impractical for many surfaces common to most buildings such as cinder block, textured wall surfaces, fabric and carpet. Vacuum sampling methods have been developed for the evaluation of lead or pesticides on residential surfaces such as carpets, bare floors and window sills. However, the current vacuum methods may be impractical for many workplace situations such as sampling of protective clothing, complex facility structures, or equipment surfaces. Recent work using vacuum sampling for potential bio-terrorism agents such as anthrax spores may have significant application to industrial hygiene evaluations of the workplace and may be extendable for use in sampling of metals such as beryllium. Validated vacuum sampling methods that provide meaningful data would be of great value to industrial hygienists in identifying areas having surface contamination, evaluating existing controls and work practices and determining the potential of toxic material on surfaces to become airborne and present a potential risk to workers and the public. This article discusses various vacuum sampling methodologies and recommends harmonization of sampling methods.     

Hydrochemical and geoelectrical investigation of the coastal shallow aquifers in El-Omayed area, Egypt

Monitoring and assessment of the coastal aquifers are becoming a worldwide concern for the need of additional and sustainable water resources to satisfy demographic growth and economic development. A hydrochemical and geoelectrical investigation was conducted in the El-Omayed area in the northwestern coast of Egypt. The aim of the study was to delineate different water-bearing formations, provide a general evaluation of groundwater quality, and identify the recharge sources in aquifers. Thirty-seven water samples were collected and chemically analyzed from the sand dune accumulations and oolitic limestone aquifers. Fifteen profiles of vertical electrical soundings (VESs) were obtained in the oolitic limestone aquifer to examine the variations of subsurface geology and associated groundwater chemistry. The groundwater reserves in the El-Omayed area are mainly contained in sand dune accumulations and oolitic limestone aquifers. The aquifer of sand dune accumulations contains freshwater of low salinity (average total dissolved solids (TDS)?=?974 mg/l). Groundwater of oolitic limestone aquifer is slightly brackish (average TDS?=?1,486 mg/l). Groundwater of these aquifers can be used for irrigation under special management for salinity control, and regular leaching as indicated by electrical conductivity and sodium adsorption ratio. Results of VES interpretation classified the subsurface sequence of oolitic limestone aquifer into four geoelectric zones, with increasing depth, calcareous loam, gypsum, oolitic limestone, and sandy limestone. Oolitic limestone constitutes the main aquifer and has a thickness of 12–32 m.     

国内外烟气流速测量标准比较分析

比较了国内外燃煤电厂烟气流速测量技术及相关标准,分析了测量仪器、矩形烟道采样位置及采样点位置和数目等方面的异同,结合我国电厂现场烟气流速测量的实际情况,提出了修改《固定污染源排气中颗粒物测定与气态污染物采样方法》相关内容的建议。     

Preparation, certification and interlaboratory analysis of workplace air filters spiked with high-fired beryllium oxide

Occupational sampling and analysis for multiple elements is generally approached using various approved methods from authoritative government sources such as the National Institute for Occupational Safety and Health (NIOSH), the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA), as well as consensus standards bodies such as ASTM International. The constituents of a sample can exist as unidentified compounds requiring sample preparation to be chosen appropriately, as in the case of beryllium in the form of beryllium oxide (BeO). An interlaboratory study was performed to collect analytical data from volunteer laboratories to examine the effectiveness of methods currently in use for preparation and analysis of samples containing calcined BeO powder. NIST SRM(?) 1877 high-fired BeO powder (1100 to 1200 °C calcining temperature; count median primary particle diameter 0.12 μm) was used to spike air filter media as a representative form of beryllium particulate matter present in workplace sampling that is known to be resistant to dissolution. The BeO powder standard reference material was gravimetrically prepared in a suspension and deposited onto 37 mm mixed cellulose ester air filters at five different levels between 0.5 μg and 25 μg of Be (as BeO). Sample sets consisting of five BeO-spiked filters (in duplicate) and two blank filters, for a total of twelve unique air filter samples per set, were submitted as blind samples to each of 27 participating laboratories. Participants were instructed to follow their current process for sample preparation and utilize their normal analytical methods for processing samples containing substances of this nature. Laboratories using more than one sample preparation and analysis method were provided with more than one sample set. Results from 34 data sets ultimately received from the 27 volunteer laboratories were subjected to applicable statistical analyses. The observed performance data show that sample preparations using nitric acid alone, or combinations of nitric and hydrochloric acids, are not effective for complete extraction of Be from the SRM 1877 refractory BeO particulate matter spiked on air filters; but that effective recovery can be achieved by using sample preparation procedures utilizing either sulfuric or hydrofluoric acid, or by using methodologies involving ammonium bifluoride with heating. Laboratories responsible for quantitative determination of Be in workplace samples that may contain high-fired BeO should use quality assurance schemes that include BeO-spiked sampling media, rather than solely media spiked with soluble Be compounds, and should ensure that methods capable of quantitative digestion of Be from the actual material present are used.     

The contribution of evaporative emissions from gasoline vehicles to the volatile organic compound inventory in Mexico City

The strategy for decreasing volatile organic compound emissions in Mexico has been focused much more on tailpipe emissions than on evaporative emissions, so there is very little information on the contribution of evaporative emissions to the total volatile organic compound inventory. We examined the magnitudes of exhaust and evaporative volatile organic compound emissions, and the species emitted, in a representative fleet of light-duty gasoline vehicles in the Metropolitan Area of Mexico City. The US “FTP-75” test protocol was used to estimate volatile organic compound emissions associated with diurnal evaporative losses, and when the engine is started and a journey begins. The amount and nature of the volatile organic compounds emitted under these conditions have not previously been accounted in the official inventory of the area. Evaporative emissions from light-duty vehicles in the Metropolitan Area of Mexico City were estimated to be 39 % of the total annual amount of hydrocarbons emitted. Vehicles built before 1992 (16 % of the fleet) were found to be responsible for 43 % of the total hydrocarbon emissions from exhausts and 31 % of the evaporative emissions of organic compounds. The relatively high amounts of volatile organic compounds emitted from older vehicles found in this study show that strong emission controls need to be implemented in order to decrease the contribution of evaporative emissions of this fraction of the fleet.