A Study of Eichhornia crassipes Growing in the Overbank and Floodplain Soils of the River Yamuna in Delhi, India

River Yamuna, like most of the major rivers of India, has become increasingly polluted over the years from both point and non-point sources, particularly in the urban sectors such as Delhi. Field studies, conducted in January, 1994 have investigated the impact of wastewater discharges from four major drains (Najafgarh, Power House, Barapula, Kalkaji) on the overbanks, floodplains and Eichhornia in River Yamuna in Delhi, with particular reference to elemental contamination. It is concluded that except for Cd and Co, overall mean soil concentrations along the full stretch of the river in Delhi are within the world background levels of uncontaminated soils. However, the wastewater discharges from the drains, with the exception of Barapula drain, generally increase the elemental concentrations of overbank soils downstream of the discharges. Eichhornia plants growing along the banks receiving wastewaters from the Najafgarh and Barapula drains are unhealthy and reduced in population which can be attributed to a combination of alkaline pH of the growth medium, metal toxicity and high BOD at the site receiving effluents from the Najafgarh drain, and alkaline pH, metal toxicity and the turbid conditions of water with fly ash particle deposition on the plant surfaces at the site receiving effluents from the Barapula drain. Generally, considering the entire stretch of the river in Delhi, the roots of these plants growing on the overbank soils are found to be accumulators of all elements except Co, Al and Fe, with Co uptake being minimal. There are marked differences in elemental uptake of the water hyacinths growing on the overbanks and floodplains of the river.     

Uptake of arsenic by alkaline soils near alkaline coal fly ash disposal facilities

The attenuation of arsenic in groundwater near alkaline coal fly ash disposal facilities was evaluated by determining the uptake of arsenic from ash leachates by surrounding alkaline soils. Ten different alkaline soils near a retired coal fly ash impoundment were used in this study with pH ranging from 7.6 to 9.0, while representative coal fly ash samples from two different locations in the coal fly ash impoundment were used to produce two alkaline ash leachates with pH 7.4 and 8.2. The arsenic found in the ash leachates was present as arsenate [As(V)]. Adsorption isotherm experiments were carried out to determine the adsorption parameters required for predicting the uptake of arsenic from the ash leachates. For all soils and leachates, the adsorption of arsenic followed the Langmuir and Freundlich equations, indicative of the favorable adsorption of arsenic from leachates onto all soils. The uptake of arsenic was evaluated as a function of ash leachate characteristics and the soil components. The uptake of arsenic from alkaline ash leachates, which occurred mainly as calcium hydrogen arsenate, increased with increasing clay fraction of soil and with increasing soil organic matter of the alkaline soils. Appreciable uptake of arsenic from alkaline ash leachates with different pH and arsenic concentration was observed for the alkaline soils, thus attenuating the contamination of groundwater downstream of the retired coal fly ash impoundment.     

Leachate of fly ash derived from refuse incineration

For highly urbanized cities where there is a scarcity of land available for landfilling, incineration of refuse is a feasible solution for solid waste disposal. After incineration, about 20% by weight of fly ash and other residues are produced and disposed of by landfill. Leachate tests carried out on samples of fly ash show that the heavy metal concentrations of the leachate are in excess of the permissible limits set by WHO. Lime and cement are used to stabilize the fly ash. The concentrations of heavy metals in the leachates of lime and cement treated fly ash are non-detectable. In additional to pollution control, the lime and cement treated fly ash significantly improves the properties of soft clay.     

Mathematical Modeling of Leachates from Ash Ponds of Thermal Power Plants

The present study describes the development of empirical models for the prediction of various trace metals i.e., Mn, Cu, Fe, Zn and Pb found in the leachates generated from the ash ponds of various thermal power plants. The dispersion phenomenon of these trace metals followed first order reaction rate kinetics. The empirical models for individual trace metals derived from the lab scale models data correlate well with the real field data with regression coefficients varying from 0.93 to 0.98. The predicted concentrations of the trace metals varied within ±3% of the observed values in the leachates generated from the ash ponds of four thermal power plants with standard deviation varying from 0.001 to 0.032. The empirical models derived from the study can be applied for prediction of trace metals in leachates generated from similar thermal power plants.     

Leaching Characteristics of Fly Ash from Thermal Power Plants of Soma and Tunçbilek, Turkey

Use of lignite in power generation has led to increasing environmental problems associated not only with gaseous emissions but also with the disposal of ash residues. In particular, use of low quality coal with high ash content results in huge quantities of fly ash to be disposed of. The main problem related to fly ash disposal is the heavy metal content of the residue. In this regard, experimental results of numerous studies indicate that toxic trace metals may leach when fly ash contacts water. In this study, fly ash samples obtained from thermal power plants, namely Soma and Tunçbilek, located at the west part of Turkey, were subjected to toxicity tests such as European Committee for standardization (CEN) and toxicity characteristic leaching (TCLP) procedures of the U.S. Environmental Protection Agency (U.S. EPA). The geochemical composition of the tested ash samples from the power plant show variations depending on the coal burned in the plants. Furthermore, the CEN and TCLP extraction results showed variations such that the ash samples were classified as `toxic waste' based on TCLP result whereas they were classified as `non-toxic' wastes based on CEN results, indicating test results are pH dependent.     

Effects of leachant temperature and pH on leachability of metals from fly ash. A case study: Can thermal power plant, province of Canakkale, Turkey

Lignite powered electric generation plants result in increasing environmental problems associated with gaseous emissions and the disposal of ash residues. Especially, low quality coals with high ash content cause enormous quantities of both gaseous and solid fly ash emissions. The main problem is related to the disposal of fly ash, which, in many cases, contains heavy metals. It is known that toxic trace metals may leach when fly ash is in contact with water. In this study, fly ash samples obtained from the thermal power plant in the town of Can in Turkey were investigated for leachability of metals under different acidic and temperature conditions. The experimental results show that a decrease in pH of the leachant favors the extraction of metal ions from fly ash. A significant increase in the extraction of arsenic, cadmium, chromium, zinc, lead, mercury, and selenium ions from the ash is attributed to the instability of the mineral phases. These heavy metals concentrations increase with respect to increasing acidic conditions and temperature. Peak concentrations, in general, were found at around 30°C.     

Evaluation of genotoxicity of coal fly ash in Allium cepa root cells by combining comet assay with the Allium test

Fly ash is a by-product of coal-fired electricity generation plants. Its utilization and disposal is of utmost importance. Using onion (Allium cepa) root tip system, the present study was carried out to evaluate the potential toxic and genotoxic effects of fly ash, collected from a thermal power plant in West Bengal, India. Prior to testing, the collected fly ash sample was mixed with sand in different proportions. Allium bulbs were allowed to germinate directly in fly ash and after five days the germinating roots were processed for the Allium test. Additionally, the Allium test was adapted for detecting DNA damage through comet assay. The results from the Allium test indicate that fly ash at 100% concentration inhibits root growth and mitotic indices; induces binucleated cells as a function of the proportion, but is not toxic at very low concentration. In the comet assay, a statistical increase for DNA strand breaks was found only at higher concentrations. The sample was analyzed by flame atomic absorption spectrometer for Zn, Pb, Cu, Ni, Cd and As, whose presence could partly be responsible for the toxicity of fly ash. The study concludes that the classical Allium test can give a more comprehensive data when done in combination with the comet assay, which is faster, simpler and independent of mitosis. Also when fly ash is used for other purposes in combination with soils, it should be judiciously used at very low concentrations in order to protect the ecosystem health from any potential adverse effects.     

Speciation of Cr and its leachability in coal by-products from spanish coal combustion plants

This study evaluates the behaviour of total Cr and Cr (VI) during coal combustion in two Spanish power stations. The content and distribution of Cr in the feed coal and combustion wastes was determined and the Cr contents were normalized using enrichment factor indexes. The speciation of Cr in the fly ash fractions from the different hoppers of the electrostatic precipitators was established and the possibility that the Cr (VI) might lixiviate when ashes are disposed of at landfill sites was assessed. Differences in the distribution and behavior of Cr in the two power stations were observed. According to European directive 1999/31/CEE, soluble Cr(VI) in the fly ashes studied would be unlikely to pose an environmental or health risk when the ash is disposed of.     

Disaster Management for Nandira Watershed District Angul (Orissa) India, Using Temporal Remote Sensing Data and Gis

NALCO – the largest exporter of aluminium in India has a power plant of 720 MW capacity in Nandira watershed in Angul district of Orissa. The power plant utilises local coal to generate thermal power and disposes of large amount of ash which accumulates in slurry form at nearby two ash ponds. These ash ponds were breached on 31 December 2000, causing ash accumulation for entire regime of the Nandira river. An attempt has been made towards preparation of recovery and rehabilitation plan for NALCO using temporal Remote Sensing data and GIS. Indian remote sensing satellite data for pre-breach condition 12 December 2000, during breach event 31 December 2000 and post-breach condition 4 and 6 January 2001 has been digitally analysed for Nandira watershed. The satellite data of coarse spatial resolution provides the absence and presence of fresh sediment deposition along Nandira watershed and Brahmani river pertaining to pre-breach and post-breach conditions respectively on regional scales. The temporal comparison of fine resolution has clearly highlighted the aerial extent of damage caused by the disaster for entire watershed on local scales. The GIS has helped in demarcation of freshly accumulated ash at interval of 500 m along the river length as well as in delineation of maximum ash accumulation across the river width. The study has clearly demonstrated the use of temporal Remote Sensing data in conjunction with GIS for disaster management in terms of recovery and rehabilitation plan preparation of the Nandira watershed.     

Design of a Leaching Test Framework for Coal Fly Ash Accounting for Environmental Conditions

Fly ash from coal combustion contains trace elements which, on disposal or utilisation, may leach out, and therefore be a potential environmental hazard. Environmental conditions have a great impact on the mobility of fly ash constituents as well as the physical and chemical properties of the fly ash. Existing standard leaching methods have been shown to be inadequate by not representing possible disposal or utilisation scenarios. These tests are often criticised on the grounds that the results estimated are not reliable as they are not able to be extrapolated to the application scenario. In order to simulate leaching behaviour of fly ash in different environmental conditions and to reduce deviation between measurements in the fields and the laboratories, it is vital to study sensitivity of the fly ash constituents of interest to major factors controlling leachability. pH, liquid-to-solid ratio, leaching time, leachant type and redox potential are parameters affecting stability of elements in the fly ash. Sensitivity of trace elements to pH and liquid to solid ratio (as two major overriding factors) has been examined. Elements have been classified on the basis of their leaching behaviour under different conditions. Results from this study have been used to identify leaching mechanisms. Also the fly ash has been examined under different standard batch leaching tests in order to evaluate and to compare these tests. A Leaching Test Framework has been devised for assessing the stability of trace elements from fly ashes in different environments. This Framework assists in designing more realistic batch leaching tests appropriate to field conditions and can support the development of regulations and protocols for the management and disposal of coal combustion by-products or other solid wastes of environmental concern.     

Temporal and physiological influence of the absorption of nutrients and toxic elements by Eichhornia crassipes

Aquatic macrophytes are a very important subject of study due to their capacity to restore polluted aquatic environments as they need high nutrient concentrations to develop. The present study aims to determine their temporal and physiological influence on the amount of total nitrogen, gross protein, P, Cu, Ni, Co, Cd, Pb and Cr absorbed by Eichhornia crassipes (water hyacinth) in the River Apodi/Mossoró, RN, Brazil, identifying viable possibilities for the use of cultivated biomass. Results obtained from the parameters analyzed show that these substances are impacted by the temporality and physiology of Eichhornia crassipes. Leaves showed higher crude protein and macronutrients, while the content of micronutrients and toxic elements was higher in roots. It could, therefore, be utilized to improve water quality in the River Apodi/Mossoró.     

Determination and evaluation of hexavalent chromium in power plant coal combustion by-products and cost-effective environmental remediation solutions using acid mine drainage

The chromium species leaching from a coal combustion fly ash landfill has been characterized as well as a novel approach to treat leachates rich in hexavalent chromium, Cr(VI), by using another natural waste by-product, acid mine drainage (AMD), has been investigated during this study. It is observed that as much as 8% (approximately 10 microg g(-1) in fly ash) of total chromium is converted to the Cr(VI) species during oxidative combustion of coal and remains in the resulting ash as a stable species, however, it is significantly mobile in water based leaching. Approximately 1.23 +/- 0.01 microg g(-1) of Cr(VI) was found in the landfill leachate from permanent deposits of aged fly ash. This study also confirmed the use of AMD, which often is in close proximity to coal combustion by-product landfills, is an extremely effective and economical remediation option for the elimination of hexavalent chromium in fly ash generated leachate. Speciated isotope dilution mass spectrometry (SIDMS), as described in EPA Method 6800, was used to analytically evaluate and validate the field application of the ferrous iron and chromate chemistry in the remediation of Cr(VI) runoff.     

Current status and perspectives of accelerated carbonation processes on municipal waste combustion residues

The increasing volumes of municipal solid waste produced worldwide are encouraging the development of processes to reduce the environmental impact of this waste stream. Combustion technology can facilitate volume reduction of up to 90%, with the inorganic contaminants being captured in furnace bottom ash, and fly ash/APC residues. The disposal or reuse of these residues is however governed by the potential release of constituent contaminants into the environment. Accelerated carbonation has been shown to have a potential for improving the chemical stability and leaching behaviour of both bottom ash and fly ash/APC residues. However, the efficacy of carbonation depends on whether the method of gas application is direct or indirect. Also important are the mineralogy, chemistry and physical properties of the fresh ash, the carbonation reaction conditions such as temperature, contact time, CO₂ partial pressure and relative humidity. This paper reviews the main issues pertaining to the application of accelerated carbonation to municipal waste combustion residues to elucidate the potential benefits on the stabilization of such residues and for reducing CO₂ emissions. In particular, the modification of ash properties that occur upon carbonation and the CO₂ sequestration potential possible under different conditions are discussed. Although accelerated carbonation is a developing technology, it could be introduced in new incinerator facilities as a “finishing step” for both ash treatment and reduction of CO₂ emissions.     

Assessing the potential impact of fly ash amendments on Indian paddy field with special emphasis on growth, yield, and grain quality of three rice cultivars

Proper disposal and/or recycling of different industrial waste materials have long been recognized as a prime environmental concern throughout the world, and fly ash is major amongst them. In the present study, we tried to assess the feasibilities of possible effective and safe utilization of fly ash as soil amendment in Indian paddy field and its impact on rice plants, especially at growth and yield level. Our results showed that certain doses of fly ash amendments have significantly improved the physico-chemical and mineralogical properties of paddy field soil, and at lower level of amendments, fly ash induced the growth performances of three rice cultivars too. Grain yield and grain quality also responded similarly as per the growth responses. However, differential cultivar response was observed accordingly, and cultivar Sugandha-3 showed higher yield as compared with cultivars Sambha and Saryu-52. Based on the observed results, it was concluded that up to a certain level, fly ash amendments could be beneficial for Indian paddy field and can be utilized as feasible management strategy for the disposal of this major industrial waste.     

Investigation on chemical species of arsenic, selenium and antimony in fly ash from coal fuel thermal power stations

Investigations of the existing chemical forms and the concentrations of arsenic (As), selenium (Se) and antimony (Sb) in samples of fly ash obtained from six coal-fired power stations in various countries were carried out. The concentration of As was found to vary from 5.4 to 22.3 mg kg(-1), and the most common mode of occurrence of As in the fly ashes is in association with carbonates or Fe-Mn oxides. The concentrations of Se and Sb ranged from 2.3-5.2 and 1.0-3.9 mg kg(-1), respectively. The dominant chemical forms of Se and Sb in the fly ashes were as extractable species. Also, water-soluble As, Se and Sb in the fly ashes were extracted, and the chemical species of As, Se and Sb in the extract determined using HPLC-ICP-MS. This was done as the potential release of soluble As, Se and Sb through leaching of fly ash is of environmental concern. The most abundant form of As in the extract was the low toxicity As(V). The main species of Se was Se(IV), although it was found that the ratio of Se(VI) to Se(IV) in acidic fly ashes is higher than in alkaline fly ash samples. Antimony was mostly present as Sb(III).     

Influence of mercury from fly ash on cattle reared nearby thermal power plant

Cattle grazing nearby coal-fired power stations are exposed to fly ash. The present investigation aims to assess the environmental and health impacts of fly ash containing mercury emitted from thermal power plant. The health effect of fly ash were studied using 20 lactating cattle reared within a 5-km radius of s thermal power plant for the possible effect of fly ash such as the alterations in hematological and biochemical parameters of blood, milk, and urine. Results indicated that the hemoglobin levels (6.65?±?0.40?g/dl) were significantly reduced in all the exposed animals. Biochemical parameters viz., blood urea nitrogen (27.35?±?1.19?mg/dl), serum glutamate oxaloacetate transaminase (43.39?±?3.08?IU/l), albumin, and creatinine were found to be increased, whereas serum glutamate pyruvic transaminase (29.26?±?2.02) and Ca²⁺ were observed to be statistically insignificant in exposed animals. Mercury concentrations estimated in the blood, milk, and urine of exposed (n?=?20) and control (n?=?20) animals were 7.41?±?0.86, 4.75?±?0.57, 2.08?±?0.18, and 1.05?±?0.07, 0.54?±?0.03, 0.20?±?0.02?μg/kg, respectively. The significant increase (P?<?0.01) in the levels of mercury in blood, milk, and urine of exposed animals in comparison to control indicated that the alterations of biochemical parameters in exposed cattle could be due to their long term exposure to fly ash mercury which may have direct or indirect impact on human populations via food chain.     

Adsorption–desorption of metolachlor and atrazine in Indian soils: effect of fly ash amendment

The effect of two fly ashes as soil amendment on the adsorption–desorption of metolachlor [2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylphenyl)] and atrazine (2-chloro-4-ethylamino-6-isopropylamino-1,3,5-triazine) was studied in alluvial and laterite soils. The adsorption data for both the herbicides fitted well the Freundlich equation, and Freundlich adsorption coefficient (K _f) increased with an increase of fly ash amount. Both the fly ashes differed in their extent to increase herbicide sorption, and the effect was different in different soils. Atrazine was sorbed more in the soils/soils?+?fly ash mixtures than the metolachlor. The K _f values showed significant correlation with the amount of fly ash amendment (correlation coefficient, R?>?0.982). The desorption isotherms also fitted the Freundlich equation, and desorption showed hysteresis which increased with an increase in the content of fly ash amendment. The free energy change (ΔG) indicated that the sorption process is exothermic, spontaneous, and physical in nature. The study has shown that fly ash as soil amendment significantly increased the sorption of metolachlor and atrazine, but the effect is soil- and fly ash-specific.     

Investigation into the relationship between major and minor element contents and particle size and leachability of boron in fly ash from coal fuel thermal power plants

A basic investigation of boron in discharged fly ash by coal fuel thermal power plants in several worldwide locations was carried out. Eight kinds of fly ash sample were prepared from eight coal fuel thermal power plants. Two of the fly ash samples were used to examine the relationship between the concentration of boron in fly ash and the particle size. When the particle size of fly ash is smaller, there is a possibility that it will be released into the air and spread over a wide area in the environment. However, it has become apparent that fly ash of smaller particle size has a higher concentration of boron and a higher enrichment factor. In other fly ash samples, the boron contents were examined and leaching tests were carried out. There is acidic fly ash as well as alkaline fly ash that contains larger amounts of acidic or basic salts. On alkaline fly ash, when the concentration of boron bound to Fe-Mn oxide is low; it has become apparent that leaching boron is increased in a solution with lower pH of approximately 4 which is nearly the pH of acid rain.     

Assessment of oxidative stress markers and concentrations of selected elements in the leaves of Cassia occidentalis growing wild on a coal fly ash basin

Assessment of oxidative stress levels and tissue concentrations of elements in plants growing wild on fly ash basins is critical for realistic hazard identification of fly ash disposal areas. Hitherto, levels of oxidative stress markers in plants growing wild on fly ash basins have not been adequately investigated. We report here concentrations of selected metal and metalloid elements and levels of oxidative stress markers in leaves of Cassia occidentalis growing wild on a fly ash basin (Badarpur Thermal Power Station site) and a reference site (Garhi Mandu Van site). Plants growing on the fly ash basin had significantly high foliar concentration of As, Ni, Pb and Se and low foliar concentration of Mn and Fe compared to the plants growing on the reference site. The plants inhabiting the fly ash basin showed signs of oxidative stress and had elevated levels of lipid peroxidation, electrolyte leakage from cells and low levels of chlorophyll a and total carotenoids compared to plants growing at the reference site. The levels of both protein thiols and nonprotein thiols were elevated in plants growing on the fly ash basin compared to plants growing on the reference site. However, no differences were observed in the levels of cysteine, reduced glutathione and oxidized glutathione in plants growing at both the sites. Our study suggests that: (1) fly ash triggers oxidative stress responses in plants growing wild on fly ash basin, and (2) elevated levels of protein thiols and nonprotein thiols may have a role in protecting the plants from environmental stress.     

Behavior study of trace elements in pulverized lignite, bottom ash, and fly ash of Amyntaio power station, Greece

The Kozani–Ptolemais–Amyntaio basin constitutes the principal coal field of Greece. Approximately 50 % of the total power production of Greece is generated by five power stations operating in the area. Lignite samples, together with the corresponding fly ash and bottom ash were collected, over a period of 3 months, from the power plant of Amyntaio and analyzed for their content in 16 trace elements. The results indicate that Y, Nb, U, Rb, Zr, Ni, Pb, Ba, Zn, Sr, Cu, and Th demonstrate an organic affinity during the combustion of lignite, while V has an inorganic affinity. Three elements (Co, Cr, and Sc) show an intermediate affinity.