Effects of selected soil properties on phytoremediation applicability for heavy-metal-contaminated soils in the Apulia region, Southern Italy

Phytoremediation is a well-known promising alternative to conventional approaches used for the remediation of diffused and moderated contaminated soils. The evaluation of the accumulation, availability, and interactions of heavy metals in soil is a priority objective for the possible use of phytoremediation techniques such as phytoextraction and phytostabilization. The soils used in this work were collected from a number of sites inside a protected area in the Apulia region (Southern Italy), which were contaminated by various heavy metals originated from the disposal of wastes of different sources of origin. Soils examined contained Cd, Cr, Cu, Ni, Pb, and Zn in amounts exceeding the critical limits imposed by EU and Italian laws. However, the alkaline conditions, high organic matter content, and silty to silty loamy texture of soils examined would suggest a reduced availability of heavy metals to plants. Due to the high total content but the low available fraction of heavy metals analyzed, especially Cr, phytoextraction appears not to be a promising remediation approach in the sites examined, whereas phytostabilization appears to be the best technique for metal decontamination in the studied areas.     

钝化材料对Cd污染农田修复及其后效探究

在田间试验条件下,考察不同钝化材料对农田Cd轻度污染水稻修复效果及稻麦轮作后第二年水稻修复后效。结果表明,在轻度Cd污染农田中,各钝化材料处理均能不同程度降低土壤有效态Cd含量和水稻籽粒中Cd含量。其中,在钝化材料施用当季和稻麦轮作后第二季水稻中修复效果最好的处理为中量纳米材料处理和石灰配施中量纳米材料处理,这两种处理对土壤有效态Cd含量降低率分别为50.94%和47.15%,对水稻籽粒中Cd含量降低率分别为73.74%和69.41%。     

硅肥对农田镉轻度污染水稻修复效果的研究

为探讨硅肥对农田土壤Cd污染的修复效果,在田间试验条件下,研究了不同硅肥处理对Cd轻度污染农田水稻的修复效果。结果表明:不同硅肥处理可以降低Cd轻度污染农田中水稻糙米Cd含量,降幅为2.02%~16.00%,提高土壤pH值0.36~0.45,降低土壤有效态Cd含量,降幅为34.88%~45.47%,水稻产量增加3.63%~6.23%,基施与叶面喷施联合施用硅肥对农田土壤Cd污染的修复效果最好。     

The relevance of speciation in the remediation of soils and sediments contaminated by metallic elements--an overview and examples from Central Scotland, UK

The environmental impact of metallic contaminants in soils and sediments is dependent both on the chemical speciation of the metal and the response of the matrix to biological and physicochemical conditions. These factors are responsible for the mobilisation of the metal from the solid into the aquatic phase and hence transport within the immediate vicinity, impacting on the rate of dispersal, dilution, uptake and transfer into living systems. The impact of changing environmental conditions on the contaminant inventory can be to enhance or moderate these phenomena, with subsequent consequences for the broader risk assessment of the contaminants. Remediation of metallic contaminants can only be brought about by their removal from the site or by establishing conditions which favour their retention in the solid phase. A wide range of in situ and ex situ approaches are available and a summary overview is presented. The examples show assessment at both the field and laboratory scale and demonstrate an equally wide range of success in achieving remediation targets. This can be attributed to limitations in ensuring that the desired conditions for the initial removal or immobilisation process are met and maintained over a suitable period of time. Three areas are reviewed which include: the transport and release of metallic contaminants in estuarine sediments and the assessment of their potential to impact on biota; terrestrial contamination systems involving the release of chromium from waste ore contaminating urban environments; the response of metal-contaminated wastes to changing environmental conditions and the impact of natural bioremediation. The focus of the discussion is to highlight the generation of reliable speciation information and the problems associated with impact and risk assessment. Particular issues of concern are the laboratory to field scale evaluation of contaminant behaviour and the approach used to assess the reliability of remediation options. In conclusion, part of a recent initiative in risk assessment and the development of pilot scale experimental systems to study long-term behaviour are addressed as future goals to fill gaps in current research.     

A risk-based screening approach for prioritizing contaminants and exposure pathways at Superfund sites

Contamination at Superfund sites can involve mixtures of chemicals and radionuclides in a variety of environmental media. Determining priorities for evaluation and remediation of various contaminants is an important part of the initial phases of any site investigation. An effective screening analysis at the beginning of the project can help by identifying both those situations in need of immediate remedial attention and those which require further sampling and evaluation. The screening approach discussed here is made up of two sets of calculations designed to provide upper- and lower-bound estimates of health risk to individuals likely to receive the highest exposures. This approach allows rapid identification of contaminants which pose a negligible risk and can be assigned a low priority for remedial attention or which pose a substantial risk and should be given the highest priority for appropriate remediation efforts. Contaminants designated as neither high- nor low-priority should be investigated in more detail prior to making decisions regarding the need for or method of remediation. The utility of this approach has already been demonstrated in the evaluation of contamination in the Clinch and Tennessee River systems originating from historical operations of atomic weapons and energy research facilities near Oak Ridge, Tennessee.     

Effective application of monitoring information: the case of San Francisco Bay

The San Francisco Estuary Regional Monitoring Program (RMP) for Trace Substances is an innovative partnership among a regulatory agency, more than 70 regulated entities, and an independent scientific organization. The institutional arrangement behind the RMP has made the regulatory system increasingly responsive to emerging management needs, particularly with regard to the development of total maximum daily loads and ecosystem impairment assessment. Through multi-agency partnerships within and outside the RMP institutional structure, major information gaps for several pollutants of concern have been narrowed, resulting in a successful consensus-based regulatory approach to managing copper and nickel mass inputs into the Estuary. Short-term research efforts, based upon monitoring results, helped identify the most cost-effective control and remediation options for various bioaccumulative substances. Additionally, adaptive changes to the monitoring program documented the existence of widespread aquatic toxicity in the Estuary that is apparently due to pesticide runoff from agricultural and urban areas. One of the most important contributions of this collaborative monitoring program is the deliberate and systematic adjustment of management and research questions that serve to influence and add relevance to the overall research agenda related to San Francisco Estuary ecosystem assessment.     

Characterizing soils for hazardous waste site assessments

This paper provides a review and justification of the minimum data needed to characterize soils for hazardous waste site assessments and to comply with the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA). Scientists and managers within the regulatory agency and the liable party need to know what are the important soil characteristics needed to make decisions about risk assessment, what areas need remediation and what remediation options are available. If all parties involved in characterizing a hazardous waste site can agree on the required soils data set prior to starting a site investigation, data can be collected in a more efficient and less costly manner. Having the proper data will aid in reaching decisions on how to address concerns at, and close-out, hazardous waste sites.This paper was prepared to address two specific concerns related to soil characterization for CERCLA remedial response. The first concern is the applicability of traditional soil classification methods to CERCLA soil characterization. The second is the identification of soil characterization data type required for CERCLA risk assessment and analysis of remedial alternatives. These concerns are related, in that the Data Quality Objective (DQO) process addresses both. The DQO process was developed in part to assist CERCLA decision-makers in identifying the data types, data quality, and data quantity required to support decisions that must be made during the remedial investigation/feasibility study (RI/FS) process. Data Quality Objectives for Remedial Response Activities: Development Process (US EPA, 1987a) is a guidebook on developing DQOs. This process as it relates to CERCLA soil characterization is discussed in the Data Quality Objective Section of this paper.     

Optimizing environmental monitoring networks with direction-dependent distance thresholds

In the direction-dependent approach to location modeling developed herein, the distance within which a point of demand can find service from a facility depends on direction of measurement. The approach is effective for environmental location problems in which an underlying process with a prevailing gradient (e.g., wind or water flow) influences the interaction between sites in a modeled field. The utility of the approach is illustrated through an application to groundwater remediation.     

严格管控类耕地非食用植物镉修复效果评价

综述了国内外在烟草,树木(杨树、柳树、桑树),纤维植物(苎麻、棉花)和蓖麻等非食用植物修复土壤镉方面的研究与应用进展,综合分析其修复能力与经济效益,得出蓖麻和苎麻的修复效果最佳.针对严格管控类耕地土壤镉修复,提出了开展非食用植物修复大田试验示范、研发环境友好型辅助措施、优化种植结构调整生态补偿机制,以及及时开展耕地土壤环境质量类别动态调整等建议.     

Biodiversity offsets in EIA: Getting the timing right

Major developments can result in significant impacts on biodiversity, which the mandated process of environmental impact assessment (EIA) aims to mitigate. There has been a recent move towards the application of biodiversity offsets as a last-resort, compensatory measure when options at the earlier stages in the mitigation hierarchy of avoidance, minimisation and restoration have been exhausted. Guidance on biodiversity offset planning available in different jurisdictions, however, demonstrates a lack of consensus about when biodiversity offsets should be formally introduced into the EIA process, and previous research has highlighted the perceived risks associated with commencing detailed offset planning too early as well as too late. Here we explore the implications of how and when offset considerations are introduced within EIA. We do this by reviewing and synthesising best practice principles for biodiversity offsets from the international literature, and then exploring how and when offsets were considered in a number of case studies that draw on documentary analysis and interviews with key role players. Our case studies are based in South Africa where regional guidance on offsets exists, supporting a body of practice. The research finds that the timing of involvement of biodiversity specialists is critical in determining whether considering offsets early will reap the combined benefits of: transparency and stakeholder engagement; guaranteeing the offset before development commences; and offset enforceability without jeopardising adherence to the mitigation hierarchy. Bypassing the mitigation hierarchy was perceived as allowing proponents to ‘buy’ approvals for developments that might otherwise be found unacceptable, although there was no evidence for this in any of the case studies evaluated. Although some of our findings may be specific to the South African context, the approach taken using international best practice principles for biodiversity offsets as a benchmark can equally be applied to evaluate practice in other EIA systems. We confirm the utility of this approach by evaluating the recently released South African Draft National Biodiversity Offset Policy for its potential to support best practice biodiversity offsets in EIA.     

Screening and prioritisation of chemical risks from metal mining operations, identifying exposure media of concern

Metals have been central to the development of human civilisation from the Bronze Age to modern times, although in the past, metal mining and smelting have been the cause of serious environmental pollution with the potential to harm human health. Despite problems from artisanal mining in some developing countries, modern mining to Western standards now uses the best available mining technology combined with environmental monitoring, mitigation and remediation measures to limit emissions to the environment. This paper develops risk screening and prioritisation methods previously used for contaminated land on military and civilian sites and engineering systems for the analysis and prioritisation of chemical risks from modern metal mining operations. It uses hierarchical holographic modelling and multi-criteria decision making to analyse and prioritise the risks from potentially hazardous inorganic chemical substances released by mining operations. A case study of an active platinum group metals mine in South Africa is used to demonstrate the potential of the method. This risk-based methodology for identifying, filtering and ranking mining-related environmental and human health risks can be used to identify exposure media of greatest concern to inform risk management. It also provides a practical decision-making tool for mine acquisition and helps to communicate risk to all members of mining operation teams.     

Migration of pollutants in groundwater. VI. Flushing of DNAPL droplets/ganglia

Models for describing the flushing of DNAPL from contaminated aquifers are developed, and the dependence of the calculated cleanup times on the model parameters is explored. Diffusion transport from isolated DNAPL droplets, from low-permeability porous spherical domains containing distributed DNAPL droplets, and from low-permeability porous planar lamellae containing distributed DNAPL is analyzed, and the resulting expressions then coupled with the equations for advective transport of dissolved VOC by means of natural uniform flow and a system of injection and recovery wells generating a two-dimensional flow field. The models are readily run on currently available microcomputers. The results of computations with the models are consistent with the severe tailing and slow rates of remediation which are generally observed when DNAPLs are removed by flushing.     

江苏省土壤修复产业发展现状及对策分析

简述了江苏省土壤修复市场发展情况及土壤修复技术发展现状。从营商环境、市场竞争力、标准法规建设等方面分析存在的市场问题,提出应规范市场环境、培育企业竞争力,加强标准制定、模式创新和人才培养的建议。针对场地环境调查与风险评估技术有待提升、地下水修复技术研发工作投入不足、修复后土壤监测和安全再利用问题突出等技术问题,提出,应完善环境调查与风险评估技术研究,加强土水修复材料、装备与工艺研发,提升长期监测及修复再利用研究的建议。以期为土壤修复行业的良性发展提供有益参考。     

Remediation of mould damaged building materials--efficiency of a broad spectrum of treatments

We compared the efficiency of some commercially available products and methods used for remediation of mould-contaminated building materials. Samples of gypsum board and pinewood were artificially contaminated with toxin-producing isolates of Stachybotrys chartarum and Aspergillus versicolor, respectively, then, ten different remediation treatments were applied according to the manufacturers' instructions. Microbial and chemical analyses of the infested materials were carried out both immediately before and after treatment, after six weeks of drying at room temperature, and after another six weeks of remoistening. The aim of the study was to determine whether the investigated methods could inhibit the mould growth and destroy some selected mycotoxins produced by the moulds. None of the decontamination methods tested could completely eliminate viable moulds. Some methods, especially boron based chemicals, ammonium based chemicals, and oxidation reduced the contents of mycotoxins produced by S. chartarum (satratoxin G and H, verrucarol), whereas the one which uses an ammonium based chemical reduced the amount of sterigmatocystin produced by A. versicolor with statistical significance. No remediation treatment eliminated all the toxins from the damaged materials. These results emphasize the importance to work preventively with moisture safety throughout the construction processes and management to prevent mould growth on building materials.     

Estimating contaminant attenuation half-lives in alluvial groundwater systems

One aspect of describing contamination in an alluvial aquifer is estimating changes in concentrations over time. A variety of statistical methods are available for assessing trends in contaminant concentrations. We present a method that extends trend analysis to include estimating the coefficients for the exponential decay equation and calculating contaminant attenuation half-lives. The conceptual model for this approach assumes that the rate of decline is proportional to the contaminant concentration in an aquifer. Consequently, the amount of time to remove a unit quantity of the contaminant inventory from an aquifer lengthens as the concentration decreases. Support for this conceptual model is demonstrated empirically with log-transformed time series of contaminant data. Equations are provided for calculating system attenuation half-lives for non-radioactive contaminants. For radioactive contaminants, the system attenuation half-life is partitioned into the intrinsic radioactive decay and the concentration reduction caused by aquifer processes. Examples are presented that provide the details of this approach. In addition to gaining an understanding of aquifer characteristics and changes in constituent concentrations, this method can be used to assess compliance with regulatory standards and to estimate the time to compliance when natural attenuation is being considered as a remediation strategy. A special application of this method is also provided that estimates the half-life of the residence time for groundwater in the aquifer by estimating the half life for a conservative contaminant that is no longer being released into the aquifer. Finally, the ratio of the half-life for groundwater residence time to the attenuation half-life for a contaminant is discussed as a system-scale retardation factor which can be used in analytical and numerical modeling.     

Heavy metal speciation in the composting process

Composting is one of the more efficient and environment friendly methods of solid waste disposal and has many advantages when compared with landfill disposal on which the UK and Ireland are currently heavily dependent. Composting is a very complicated process involving intensive microbial activity and the detailed mechanisms of the process have yet to be fully understood. Metal speciation information can provide an insight into the metal-microbial interaction and would help in the evaluation of the quality of compost. This would facilitate the exploitation of composts in remediation of heavy metal contaminated land. In this work a systematic approach to metal speciation in compost has been taken by applying the three-step method for operationally defined metal speciation of soils and sediments, developed by the European Commission's Standards, Measurement and Testing Programme to monitor the change in metal speciation with time (up to 106 days) for four different waste composting processes. The results have shown that in general metals become less available for the first extraction step as the composting process proceeds. This implies that composting tends to redistribute the metals from more labile forms to more fixed forms which may explain why the application of composts could be useful for with heavy metal contaminated land. There are exceptions to this trend and in some cases, certain metals appear to behave differently depending on the source of the compost.     

An Improved Rating System for Assessing Surface Water Contamination Potential from MSW Landfills

Leachate emission from uncontrolled municipal solid waste landfills (referred to as waste sites in the present study) is a major threat to the environment and living beings in its vicinity. Surface water contamination potential resulting from leachate may be used as one of the criteria for prioritization of sites for remediation purposes. The existing hazard rating systems that prioritize waste sites considering surface water contamination potential as one of the criteria are mainly suited for the developed countries where these were developed initially. In developing countries like India, the set of conditions differ from those in developed countries, and therefore the existing systems may not be suitable for developing countries. Thus in the present study, an improved system is proposed to assess surface water contamination potential from MSW sites. The system is based on the concept of Source, Pathway and Receptor. The proposed system employs parameters derived from the review of existing rating systems and selects their best and worst values based on literature review, design standards and field conditions. The importance weights of the system parameters have been decided based on expert judgment using Delphi technique. Sensitivity analysis of the system shows that the improved system is more sensitive than the existing systems for the site conditions encountered in developing countries. Monte Carlo analysis of the proposed system confirms the spread of the scores obtained from the system over the full scale of 0–1000. The improved system is compared with existing systems by applying it to waste sites from metropolitan cities of India and performing clustering analysis on the rating scores. The clustering analysis shows that the rating scores from the improved system are less clustered as compared to the scores from the existing systems. This demonstrates that the improved system makes a better tool to distinctly prioritize the waste sites for remediation purpose.     

Determination and evaluation of hexavalent chromium in power plant coal combustion by-products and cost-effective environmental remediation solutions using acid mine drainage

The chromium species leaching from a coal combustion fly ash landfill has been characterized as well as a novel approach to treat leachates rich in hexavalent chromium, Cr(VI), by using another natural waste by-product, acid mine drainage (AMD), has been investigated during this study. It is observed that as much as 8% (approximately 10 microg g(-1) in fly ash) of total chromium is converted to the Cr(VI) species during oxidative combustion of coal and remains in the resulting ash as a stable species, however, it is significantly mobile in water based leaching. Approximately 1.23 +/- 0.01 microg g(-1) of Cr(VI) was found in the landfill leachate from permanent deposits of aged fly ash. This study also confirmed the use of AMD, which often is in close proximity to coal combustion by-product landfills, is an extremely effective and economical remediation option for the elimination of hexavalent chromium in fly ash generated leachate. Speciated isotope dilution mass spectrometry (SIDMS), as described in EPA Method 6800, was used to analytically evaluate and validate the field application of the ferrous iron and chromate chemistry in the remediation of Cr(VI) runoff.     

Selection of appropriate sampling stations in a lake through mapping

Much valuable information is obtained from water quality measurements and monitoring of lakes around the world. A powerful tool is the use of mapping techniques, as it offers potential use in water quality research. Both remote sensing techniques and traditional water quality monitoring are required to collect data at sampling stations. This study suggests another approach to determine the most appropriate distribution of sampling stations in water reservoirs that will be mapped for water quality parameters. Tests were conducted for the proposed approach for Secchi disc depth (SDD), chlorophyll-a, turbidity and suspended solids parameters in Lake Beysehir, Turkey. Results of analysis are available for a total of 30 sampling stations in August 2006. Ten sampling stations were used to model Lake Beysehir while the others were used for validation of the model. Sampling stations that offered the best representation of the lake for each parameter were determined. Then, the best representative sampling stations for all parameters in the study were determined. Moreover, in order to confirm the accuracy of these re-determined sampling stations, modelling was performed on the results of the analysis of June 2006, and it was found that the values obtained from the re-determined sampling stations were acceptable.