Acoustic analysis of blast waves produced by rapid phase transition of LNG released on water

Massive offshore and onshore storage of fuel have led the international community to raise questions about the hazards on the surrounding installations and people. Among the possible accidental scenarios when cryogenic gas as liquefied natural gas (LNG) is spilled on water at a very fast rate, the phenomenon of rapid phase transition (RPT) may occur: large amounts of energy are released during phase transition which can generate explosions. The related consequences should be added to the possible consequences of fire in terms of flash fire, fireball, pool fire, and vapour cloud explosion for confined and congested geometry surrounding the release point.In this paper, the analysis of RPT of LNG has been studied from the point of view of blast wave production, through ab initio acoustic analysis for monopole source. Maximum overpressures, as calculated at the source point and along the blast pathway are compared with results of large scale experiments. Safety distances are given for the sake of comparison with threshold distances reported in the open literature.     

Analyzing effective factors on leakage-induced hydrogen fires

Currently, novel energy resources are receiving increasing attention as a response to the limitation in fossil fuels as well as their adverse effects on human health. Hydrogen, one of the most abundant elements on the earth, can be regarded as a new energy source to replace fossil fuels. Therefore, safety assessment of the relating processes is very crucial by increasing use of hydrogen as a fuel source. In this regard, consequence analysis for risk assessment and power reduction is very important. The present study aims at modeling hydrogen dispersion along with consequence analyses for such events as jet fire and flash fire. The model was validated by using the data derived from a study on hydrogen leakage in supply pipelines in the laboratory of the University of Pisa. Modeling results reveal that ambient conditions will impose a milder impact on leakage consequences if internal pressure is high in release source. The safe distance was also estimated to be 14 m. Dispersion consequence modeling was performed, followed by the evaluation of the effect of environmental (i.e., stability, ambient temperature, surface roughness, wind speed, and humidity) and process (i.e., vessel temperature and pressure, leakage diameter, and releasing point height) parameters on maximum size flammable vapor cloud and maximum level jet fire radiation on the ground. The size of flammable vapor cloud (consequence dispersion index) and the maximum flux of radiation were affected by process parameters more than ambient parameters. Leakage diameter and the vessel pressure were found to have the highest impact on the operational parameters.     

Numerical study on the initial expansion of two-phase cloud from an instantaneous release

In industries some dangerous liquefied gases may accidentally release and it may form a flammable or toxic mixture after mixing with air. One tool that is being developed in industry for two-phase cloud dispersion modeling is computational fluid dynamics (CFD). In this paper, the dispersion processes of different dangerous materials including liquefied chlorine, liquefied ammonia and liquefied petroleum gas were simulated in the same condition to analyze the characteristics of the initial expansion processes by CFD tool. The heat and mass transfer between droplets and the vapor after an instantaneous release event was calculated by using the Eulerian–Lagrangian method. The results from a number of 3-D CFD based studies were compared with the available small-scale experimental results. The results show that the present model and numerical simulation are reliable.     

氯乙烯储罐安全性分析

氯乙烯是被列入高毒物品的易燃易爆气体物质,液化氯乙烯由于其常温储存下蒸气压力高于大气压而在发生泄漏时容易引起火灾、爆炸、中毒等事故.氯乙烯储罐往往因为储存的物质量大而成为重大危险源.从国内现阶段法律法规、标准要求入手,分析了对氯乙烯储罐的安全要求,并以一具体储罐及其安全设施为实例,研究分析了储罐安全阀发生排放和储罐BLEVE等事故后果.并以此为基础,提出了本实例条件下保证储罐安全的具体要求.     

Thermal interaction analysis in pipeline systems: A case study

The assessment of the consequences of high pressure releases of flammable gases is a fundamental requirement for the safe design and operation of industrial installations, plants and pipework. A scenario of interest concerns a high pressure jet-fire following the ignition of a gas jet release which results in a thermal loading to the surroundings and possibly leads to accident escalation.

In the present paper, a case study is presented: two parallel-laid natural gas pipelines have been considered, the accidental scenarios which may possibly occur as a consequence of a pipeline failure have been discussed and the thermal effects caused by the jet-fire developing from different rupture sizes have been assessed.

Three scenarios have been analyzed, considering the pipelines being within a highly congested area: (i) large failure and vertical jet with detached flame; (ii) small failure with jet fire directly impinging on the parallel pipeline; (iii) small failure with pipeline engulfed within fire.

Once the temperature gradient through the pipeline wall has been found, the stresses deriving from pressure load and steel differential expansion have been analytically calculated and compared with the yielding stresses at the temperature achieved by the pipeline wall.

In the first scenario the pipeline is able to resist without major problems; in the second case the pipeline rupture is likely to occur; in the third scenario the pipeline resists to the applied loads but with a low margin to yielding.

It is understood that the analysis results are very much dependent on the utilized hypotheses, therefore a sensitivity analysis was performed in order to assess the variation of the results as a function of the variation of problem data; this analysis identifies the large influence of the parameters on the final result.     

障碍物对天然气喷射火影响的数值模拟研究

为研究障碍物控制天然气喷射火对周围设施危害的有效性,基于流体力学基本原理与湍流模型,采用FDS模拟软件,分别研究高度为10 m的障碍物宽度和障碍物与泄漏孔间距对喷射火的影响。研究得出:障碍物对喷射火阻挡效果明显,减缓了火焰在速度方向的传播;障碍物越宽,控制火焰向前传播的效果越好,障碍物后方受火焰高温和热辐射危害越小,但随着宽度的增加,后方温度和热辐射下降率减小,障碍物宽3 m时,对火焰控制效果最好;随着障碍物与泄漏孔间距增加,障碍物后方热辐射先增加后减小,间距为5 m时,障碍物对火焰的控制效果最好,此时喷射火下游受保护的区域最宽。研究结果可为储气罐发生泄漏火灾事故处置及应急设施设计提供参考。     

Numerical simulation of small-scale pool fires of LNG

Liquefied natural gas (LNG) has been largely indicated as a promising alternative solution for the transportation and storage of natural gas. In the case of accidental release on the ground, a pool fire scenario may occur. Despite the relevance of this accident, due to its likelihood and potential to trigger domino effects, accurate analyses addressing the characterization of pool fires of LNG are still missing.In this work, the fire dynamic simulator (FDS) has been adopted for the evaluation of the effects of the released amount of fuel and its composition (methane, ethane, and propane), on the thermal and chemical properties of small-scale LNG pool fire. More specifically, the heat release rate, the burning rate, the flame height, and thermal radiation, at different initial conditions, have been evaluated for pool having diameter smaller than 10 m. Safety distances have been calculated for all the investigated conditions, as well.Results have also been compared with data and correlations retrieved from the current literature. The equation of Thomas seems to work properly for the definition of the height over diameter ratio of the LNG pool fire for all the mixture and the investigated diameters.The addition of ethane and propane significantly affects the obtained results, especially in terms of radiative thermal radiation peaks, thus indicating the inadequacy of the commonly adopted assumption of pure methane as single, surrogate species for the LNG mixture.     

Numerical investigation of surface conduit parallel gas pipeline explosive based on the TNT equivalent weight method

With the rapid development of petroleum industry, the transport pipelines of oil and gas are increasingly constructed to minimize land use conflicts. Therefore, the parallel pipelines are unavoidable in order to save land resource, reduce the pipeline construction and maintenance costs. The economy and security of pipeline laying and running is the primary problem considered in pipeline construction, which the parallel spacing plays a decisive role to. The leakage of natural gas is very serious and dangerous due to its flammable and combustible. The explosive of leak gas causes impact failure to parallel pipeline. Specific to the surface conduit parallel gas pipeline, numerical simulation of leak natural gas explosive was carried out based on TNT equivalent weight method. Explosive damage degree of pipeline decreased with the pipeline distance increasing. Consulting with the pipeline ovalization strain design criteria and the combustion effect, the safety parallel natural gas pipeline space maybe at least 4 m to ensure the surface conduit parallel pipeline safely and steadily operation.     

架空天然气管道泄漏事故后果数值模拟研究

针对架空天然气管道泄漏引起的火灾爆炸问题,采用事件树分析泄漏扩散引起的事故后果,并在数值模拟中着重分析了模拟数学模型的选择。在三种不同泄漏孔径、两种不同风速、两种不同运行压力条件下分别应用ALHOA软件对事故后果进行数值模拟,结果表明:泄漏孔径、运行压力与危害影响范围成正比关系;在闪火和蒸气云爆炸中,风速与危害影响范围成反比关系,而风速对射流火灾的热辐射范围基本没有影响。     

Numerical simulation of LNG dispersion under two-phase release conditions

The use of LNG (liquefied natural gas) as fuel brings up issues regarding safety and acceptable risk. The potential hazards associated with an accidental LNG spill should be evaluated, and a useful tool in LNG safety assessment is computational fluid dynamics (CFD) simulation. In this paper, the ADREA-HF code has been applied to simulate LNG dispersion in open-obstructed environment based on Falcon Series Experiments. During these experiments LNG was released and dispersed over water surface. The spill area is confined with a billboard upwind of the water pond. FA1 trial was chosen to be simulated, because its release and weather conditions (high total spill volume and release rate, low wind speed) allow the gravitational force to influence the cold, dense vapor cloud and can be considered as a benchmark for LNG dispersion in fenced area. The source was modeled with two different approaches: as vapor pool and as two phase jet and the predicted methane concentration at sensors' location was compared with the experimental one. It is verified that the source model affect to a great extent the LNG dispersion and the best case was the one modeling the source as two phase jet. However, the numerical results in the case of two phase jet source underestimate the methane concentration for most of the sensors. Finally, the paper discusses the effect of neglecting the ?9.3° experimental wind direction, which leads to the symmetry assumption with respect to wind and therefore less computational costs. It was found that this effect is small in case of a jet source but large in the case of a pool source.     

Unignited High-Pressure Methane Jet Impinging a Pipe Rack: Practical Tools for Risk Assessment

Although the diffusion of its storage and transport under liquefied conditions, nowadays it is common to have methane in gaseous form in several industrial applications. This leads to safety implications to be considered: hazards are linked to both the high-pressure at which the gas is kept and to its flammability. Scenarios where flammable jets impact an obstacle are of paramount importance because of their possible occurrence. Following a numerical approach, literature shows up that their assessment can be reliably performed by means of only Computational Fluid Dynamics tools. However, despite the improvements of computing power, Computational Fluid Dynamics costs still limit its use in daily risk analysts’ activities. Therefore, considering an accidental jet-obstacle scenario of industrial interest, the present work investigates how a pipe rack can influence the development of a high-pressure methane jet. Based on a Computational Fluid Dynamics analysis, main achievements of this work are a simple criterion able to identify the situations where the pipe rack does not influence the high-pressure methane jet behavior, therefore allowing to identify the scenarios where simpler models can be used (i.e., analytical correlations known for the free jet situation), and, if present, a simple analytical relationship that roughly predicts the influence of the pipe rack without the need of performing complex Computational Fluid Dynamics simulations.     

液化石油气爆炸范围及爆炸力的测定

液化石油气、瓦斯等可燃气体的爆炸防治是一个非常迫切需要解决的问题.利用自制可燃气体爆炸箱来模拟可燃气体爆炸,并通过光干涉甲烷测定仪来测定混合气体爆炸时的甲烷百分含量,再推算出液化石油气的爆炸范围和计算爆炸力.     

不同气源压缩气体泡沫灭石油醚火灾性能比较

采用实验室压缩气体泡沫系统,通过缩尺油盘火试验,分别考察基于不同气源的压缩气体泡沫对于石油醚火灾的灭火性能,分析探讨适用于低沸点的石油醚类燃料火灾扑救的气源类型和供气方案。结果表明,在泡沫溶液供给强度为2.5 L/(min·m2)的条件下,压缩氮气泡沫和压缩空气泡沫均可扑灭石油醚火灾,具有良好的抗烧性能;二者相比,压缩氮气泡沫比压缩空气泡沫的控灭火性能和抗烧性能均有一定提升;对于石油醚类的低沸点易燃液体火灾,建议采用以氮气作为气源的压缩氮气泡沫系统;该研究可为压缩气体泡沫系统在石油化工行业工程应用提供技术支撑。     

基于FLACS CFD的不同气油比油气混输管道泄漏火灾后果对比

不同气油比的油气混输管道泄漏后果危害形式和风险差异的准确判断对于管道泄漏应急处置至关重要。以中国西部某油田集输管道为研究对象,针对不同气油比管道泄漏的火灾危害进行了对比分析,构建了FLACS CFD模型,并研究了油气混输管道原油泄漏形成池火的火灾特征和影响范围,以及天然气泄漏形成喷射火的高温分布和影响规律。研究结果表明:应急处置应考虑不同气油比下池火与喷射火危害的差异。在油气混输管线泄漏10 min形成稳定火焰的场景中,气油比低于100 m3/t时,原油池火为火灾危险的主要影响因素;气油比高于200 m3/t时,天然气喷射火为主要影响因素;气油比超过250 m3/t,高温覆盖距离不再明显增加;40 m为此场景下混输油气泄漏喷射火致死距离上限,120 m为温度影响上限。     

Analysis of the boiling liquid expanding vapor explosion (BLEVE) of a liquefied natural gas road tanker: The Zarzalico accident

The road accident of a tanker transporting liquefied natural gas (LNG) originated a fire and, finally, the BLEVE of the tank. This accident has been analyzed, both from the point of view of the emergency management and the explosion and fireball effects. The accidental sequence is described: fire, LNG release, further safety valves release, flames impingement on vessel unprotected wall, vessel failure mode, explosion and fireball. According to the effects and consequences observed, the thermal radiation and overpressure are estimated; a mathematical model is applied to calculate the probable mass contained in the vessel at the moment of the explosion. The peak overpressure predicted from two models is compared with the values inferred from the accident observed data. The emergency management is commented.     

喷射火对输油管道热影响实验平台设计与验证*

为研究油气并行管道中,天然气管道喷射火对相邻输油管道内流体与管壁的热影响,设计并搭建天然气喷射火对输油管道热影响实验平台。实验平台由环道及冷却系统、火焰系统、控制及数据采集系统3个部分组成。完成平台搭建并验证环道系统气密性后,以0#柴油为介质,开展验证实验。研究结果表明:火焰系统工作可靠且可控,冷却系统能够将柴油温度控制在初馏点以下,数据采集系统能够正常采集油品压力、温度、流量、管壁温度、火焰温度等预定数据,实验平台具备一定可行性与安全性。实验平台可进行在不同管道规格及材质、火灾形式、油品介质及流速条件下的热影响实验。实验平台结合材料性能进行测试,可研究喷射火对管材性能的影响,为油气并行管道的安全运行提供相关实验依据。     

大型LPG罐区火灾爆炸事故后果评估

针对大型LPG(液化石油气)储罐区潜在的火灾爆炸危险性，建立了喷射火、火球、UVCE爆炸和BLEVE爆炸的数学伤害模型，对其发生火灾、爆炸后人员和建筑(设备)所受到的伤害和损伤进行了定量后果评估。     

高压管道天然气泄漏扩散过程的数值模拟

采用CFD模型的方法对高压管道内的天然气泄漏和扩散过程进行了数值模拟。其结果表明，从高压管道泄出的天然气在大气中主要表现为高速射流的泄漏过程和随后的扩散过程。在泄漏过程中，天然气在泄漏口附近为欠膨胀射流，整个泄漏过程具有一定的高度；在扩散过程中，天然气在浮力作用下以向上扩散的形式发展。研究了不同环境风速对扩散过程的影响，较大的风速可以使天然气向下风方向更远的距离扩散，从而增大了天然气爆炸危险浓度的范围。研究结果可     

城市天然气工程环境风险评价

结合广州、深圳、东莞、佛山等城市的天然气工程情况,对城市天然气工程的环境风险评价进行了讨论,并采用穆尔哈斯(Moorhowse)和普里恰特(Prichard)提出的热辐射预测模式和爆炸冲击波预测模式对城市天然气工程进行了风险评价.结果表明,如果发生天然气泄漏并引起火灾,假设在10 min以内,城市门站、调压站和城市高中压管道的火球对建筑物和设备的严重损害范围( A 级)最远距离分别为35.8 m、18.0 m和28.7 m,爆炸冲击波严重损害范围( C1 级)分别为距事故处54.8 m、27.8 m和44.4 m.最后从城市门站、调压站选址及输气管道选线、安全防范距离、作业过程中的风险控制与管理以及事故应急对策四方面提出了风险事故的防范措施与对策.