工业安全帽抗冲击性能研究*

为研究安全帽安全性与保护性问题,利用落锤冲击实验,对不同材质安全帽吸能率、冲击力峰值进行研究。结果表明:随冲击能量增加,安全帽受冲击力峰值呈指数倍增长,吸能率呈指数倍下降;ABS树脂与玻璃钢材质安全帽头模受冲击力峰值小于HDPE材质安全帽;当冲击能量大于60 J,HDPE材质安全帽丧失保护功能;ABS安全帽能够承受最大冲击力能量值为70 J,玻璃钢安全帽最大承载力高于ＡＢＳ树脂安全帽。研究结果可为安全帽质量设计提供理论依据。     

基于AHP-Fuzzy的高处坠落危险性评价研究

高处坠落事故在建筑安全生产事故中所占的比率最大。预防和控制高处坠落事故始终是建筑业应解决的重要问题,高处坠落危险性评价是预防与控制高处坠落事故的重要手段。以高处坠落风险为研究对象,通过对高处作业＂人—机—环境—管理＂复杂系统进行分析,建立生产人员素质因素、生产设备因素、环境条件因素、安全管理因素等4个大类和23个小类的危险性评价指标体系。在层次分析法和模糊综合评价法等研究基础上,构建了高处坠落风险的AHP-Fuzzy评价模型,确定了各层次的权重集。对给出的实例进行评价,评价结果符合实际情况。结果表明,基于AHP-Fuzzy的高处坠落危险性评价方法是可靠与实用的,并对高处坠落危险性的评判有指导意义。     

The Relationship Between the Difference in Prismatic Refractive Power of an Eye-and-Face Protector and Its Thickness,Radius of Curvature,and Material

With the help of the research results presented here and on the basis of a graphic analysis we aim to prove the existence of a relationship between the difference in prismatic refractive power and the thickness, curvature radius, and type of material used for panoramic oculars in protective spectacles, goggles, and face shields. The difference in the prismatic refractive power is a fundamental optical characteristic of a protective ocular without corrective effect. According to Standard No. EN 165:1995 (European Committee for Standardization, 1995) the difference in the prismatic refractive power is a difference in the prismatic effect at 2 observation points of an eye-protector.     

A new laboratory rig for evaluating helmets subject to oblique impacts

Current requirements and regulations governing motorcycle helmets around the world are based on test results of purely radial impacts, which are statistically rare in real accidents. This study presents a new impact rig for subjecting test helmets to oblique impacts, which therefore is able to test impacts of increased statistical relevance to real motorcycle accidents. A number of different head-helmet interfaces have been investigated. A test rig was constructed to produce oblique impacts to helmets simulating those occurring in real motorcycle accidents. A Hybrid III dummy head was fitted with accelerometers to measure the accelerations arising during impact testing. The equipment used for data collection was validated in both translational and rotational acceleration. In order to better resemble the human head, an artificial scalp was fitted to the hybrid dummy. The same test rig was used to investigate the performance of a number of different helmets. Impact velocities ranging from 7.3 to 9.9 m/s were tested using a number of different impact angles and impact areas. This study shows that the new test rig can be used to provide useful data at speeds of up to 50 km/h and with impact angles varying from purely tangential to purely radial. The rotational accelerations observed differ greatly depending on both helmet and scalp designs. For example, a helmet with a sliding outer shell placed on an experimental head fitted with an artificial scalp (made to resemble the human scalp) reduces rotational accelerations of the head by up to 56%, compared with those of an experimental head fitted with a fixed scalp and conventional helmet. The degree of slippage between the skull and the scalp, and between the scalp and the helmet, leads to considerable variation in the results. This innovative test rig appears to provide an accurate method for measuring accelerations in an oblique impact to a helmet. In order to obtain a good level of repeatability in oblique impact testing, it is crucial that the helmet be fixed to the head in the exact same way in each individual test. Both the position and the angle of impact must be reproduced identically in each test. The test rig used here has shown that this type of rig can be used to compare different helmet designs, and it therefore is able to contribute to achieving safer helmets.     

安全带整体静负荷试验机的研制及应用

安全带是有效地预防高处作业人员因意外坠落而受到身体伤害的必要防护装备。本文根据GB6095—2009《安全带》、GB／T6096—2009《安全带测试方法》标准中安全带整体静态负荷试验的要求,对安全带整体静负荷试验机的研制与应用开展一些调研和探讨,希望对从事安全带检验的机构和安全带生产的企业中的科研、检验人员提供一些感性的认知和帮助。     

基于改进的YOLOv4安全帽佩戴检测研究

为了加强建筑工人佩戴安全帽情况的检测,防止安全事故的发生,提出1种改进的轻量级YOLOv4安全帽佩戴检测算法,用于运行在移动设备端,降低现场部署的条件;制作1个8 000幅图像的数据集,用于训练和评估安全帽检测算法;为了评估改进的YOLOv4的性能,从5个不同建筑工地采集到600张施工人员图像和60条施工视频作为验证集;根据建筑工地不同的视觉条件对图像进行分类,用于验证本文算法在不同外界环境下的性能。结果表明:改进后的模型检测速度是YOLOv4的3.4倍,可用于实时检测施工人员在不同施工现场条件下是否佩戴安全帽的情况,有利于提高安全检查和监督水平。     

有限元在安全帽设计中的应用

安全帽可以防止高空坠落物对人员头部造成伤害。在材料和工艺一定的前提下,安全帽的结构对发挥安全帽的作用尤为重要。本文首先对安全帽作用机理及使用情况进行分析,指出改善安全帽帽壳缓冲性能有利于更好地发挥安全帽的作用。然后简要介绍ANSYS的建模方案以及网格划分和自由度约束情况,通过对安全帽的ANSYS有限元分析,得出安全帽的变形和应变图,并通过分析安全帽从最低端到顶端的变形和应变情况,指出安全帽在撞击过程中的能力吸收规律,根据分析数据提出建立双层安全帽帽壳的改进方案,并再次通过有限元分析得出变形和应变图,验证了双层安全帽帽壳在缓冲方面更有效果,这种分析结果可以为安全帽帽壳的设计提供参考。     

Key factors influencing management decisions concerning safety equipment selection

The construction industry involves many hazardous activities that may expose workers to a wide variety of health hazards. Selection of construction safety equipment is crucial in ensuring workers’ safety. This article aims to examine key factors influencing management decisions concerning safety equipment selection, utilizing exploratory factor analysis (EFA) and the analytic hierarchy process (AHP). A questionnaire survey is conducted in the construction companies in Bangkok, Thailand. The factor analysis extracts 103 sets of data into six key factors – namely supplier agreements, supplier support, personal, equipment design, safety-related policies and cost value factors – with a total of 20 associated items. The AHP results conclude that the safety-related policies, equipment design and personal factors are the most important factors when selecting construction safety equipment. A construction company can use the study results as a checklist to help assess different safety equipment, and to select the best equipment.     

Worker safety and injury severity analysis of earthmoving equipment accidents

Introduction: Research on construction worker safety associated with construction equipment has mostly focused on accident type rather than injury severity and the embedded factor relationships. Significant variables and their effects on the degree of injury are examined for earthmoving equipment using data from OSHA. Four types of equipment, backhoe, bulldozer, excavator, and scraper are included in the study. Accidents involving on-foot workers and equipment operators are investigated collectively, as well as separately. Methods: Cross tabulation analysis was conducted to establish the associations between selected categorical variables, using degree of injury as a dichotomous dependent variable (fatal vs. nonfatal) and a number of independent variables having different values. Odds ratios were calculated to determine how much a certain variable/factor increases the odds of fatality in an accident, and the odds ratios were ranked to determine the relative impact of a given factor. Results: It was found that twelve variables were significantly associated with injury severity. Rankings based on odds ratios showed that inadequate safety training (2.54), missing equipment protective system (2.38), being a non-union worker (2.26), being an equipment operator (1.93), and being on or around inadequately maintained equipment (1.58) produced higher odds for fatality. Conclusion: A majority of the earthmoving equipment accidents resulted in fatality. Backhoes were the most common equipment involved in accidents and fatalities. Struck-by accidents were the most prevalent and most fatal. Non-OSHA compliant safety training, missing seatbelt, operator not using seatbelt, malfunctioning back-up alarms, and poorly maintained equipment were factors contributing to accidents and fatalities. On-foot workers experienced a higher number of accidents than operators, while fatality odds were higher for the operators. Practical applications: Safety professionals should benefit from our findings in planning and delivering training and providing oversight to workers in earthmoving equipment operations.     

Evaluating the stability of a freestanding Mast Climbing Work Platform

Mast Climbing Work Platforms (MCWPs) are becoming more common at construction sites and are being used as an alternative to traditional scaffolding. Although their use is increasing, little to no published information exists on the potential safety hazards they could pose for workers. As a last line of defense, a personal fall-arrest system can be used to save a worker in a fall incident from the platform. There has been no published information on whether it is safe to use such a personal fall-arrest system with MCWPs. In this study, the issues of concern for occupational safety included: (a) the overall stability of the freestanding mast climber during a fall-arrest condition and (b) whether that fall-arrest system could potentially present safety hazards to other workers on the platform during a fall-arrest condition. This research project investigated those safety concerns with respect to the mast climber stability and the workers using it by creating fall-arrest impact forces that are transmitted to the equipment and by subsequently observing the movement of the mast climber and the working deck used by the workers. This study found that when the equipment was erected and used according to the manufacturer's recommendations during a fall-arrest condition, destabilizing forces were very small and there were no signs of potential of MCWP collapse. However, potential fall hazards could be presented to other workers on the platform during a fall arrest. Workers near an open platform are advised to wear a personal fall-arrest system to reduce the risk of being ejected. Due to the increasing use of MCWPs at construction sites, there is a corresponding need for evidence and science-based safety guidelines or regulations and further research should be conducted to continue to fill the knowledge gap with MCWP equipment.     

建筑行业劳动防护用品事故统计分析

为了解我国建筑行业劳动防护用品事故情况,对近九年建筑企业19723起事故数据进行统计分析。结果表明:建筑行业的劳动防护用品事故从整体上看,呈下降趋势,但劳动防护用品缺少或缺陷仍然是建筑企业事故重要影响因素。不同时间段、不同地域、不同类型的建筑企业劳动防护用品工作存在差异,建议相关企业及所在地区的政府监管部门加强劳动防护用品管理和监督检查工作。     

地铁隧道施工安全风险演化的BP-SD模型研究

为深入研究地铁隧道施工风险的动态演化过程,结合系统动力学(SD)、误差反向传播(BP)神经网络与平均影响值（MIV）算法,确定模型中影响因素间的因果关系和影响函数,构建地铁隧道施工风险演化的BP-SD模型。模型仿真结果表明:安全管理风险系统与施工人员风险系统的值的变化对地铁隧道施工风险值影响最大,施工环境系统的值的变化对地铁隧道施工风险值影响次之,机械设备系统的值的变化对地铁隧道施工风险值影响最小。因此,可通过降低安全管理风险值与施工人员风险值控制地铁隧道施工风险发生的概率。     

采用冲击加速度指标评价安全帽抗侧向冲击性能的研究

安全帽是应用最为广泛的一种重要的劳动作业人员头部安全防护用品,广泛使用在机械、建筑、矿山、交通、冶金、电力等行业中。在实际工作中,作业人员除可能受到来自顶部的坠落冲击外,还切实存在着受到侧面冲击的可能。现行安全帽国家标准主要采用头部受到的冲击力数值大小作为依据评价安全帽防护性能的优劣,此种方法无法用来考察安全帽的抗侧向冲击性能。本文讨论引入冲击加速度作为新的评价指标,以达到科学评价安全帽抗侧向冲击防护性能的目的。     

欧美、日本与中国个体防护标准比对

个体防护装备,以往称劳动防护用品,是以保护劳动者安全和健康为目的,并且直接与人体接触的装备或者用品。从某种意义上讲,它是保障劳动者安全和健康的最后一道防线,在保护劳动者和确保安全生产方面有着重要意义。经过多年努力,我国在个体防护装备的技术标准方面制定并颁布了一系列国家标准和行业标准,并形成了初步的标准体系,本文研究了ISO、CEN、JIS的个体防护标准体系,并着重对其体系和有代表性的标准进行比对分析,从而归纳出我国个体防护及检测技术标准存在的问题,对制定和提高我国个体防护装备的体系建设具有一定的参考意义,并为个体防护及检测领域的相关国际标准的研制工作提出一些建议。     

建筑施工高处吊篮作业安全防护预警模型研究

为提升高处吊篮作业的安全防护水平,为建筑施工安全防护预警模型研究提供理论支持,针对安全防护不足和缺位对高处吊篮作业的不利影响,建立高处吊篮作业安全防护预警指标体系。通过对作业人员的筛选,作业信息采集及数据化处理,构建基于SVM（支持向量机）的高处吊篮作业安全防护预警模型。最后,通过对历史样本数据仿真模拟验证模型的适用性和可行性。研究结果表明:建筑施工高处吊篮作业安全防护预警模型的仿真模拟结果与实际结果相比较为吻合,从安全防护审批、个体防护用品、安全防护设施、安全防护标识、心理生理防护及作业条件防护6个方面进行分析构建的安全防护预警模型可为高处吊篮作业提供预警支持,并可作为建筑企业安全管理系统的一部分,推广至其他特种作业领域。     

速差自控器动态性能试验方法的改进

为施工人员选择和配置安全可靠的个人防坠器,每年送到具有相应资质的检测单位进行强制检定,是防止高处坠落事故的重要手段。某型速差自控器在冲击试验中发生了钢丝绳断裂事故,为了查找和分析事故的真正原因,对不同厂家的速差自控器抽样,在相同试验方法和检测条件下进行冲击试验,并根据相关的标准对试验结果进行力学性能对比分析研究,找到了造成钢丝绳断裂事故的主要原因是该类型速差自控器使用的钢丝绳直径偏细以及缺少内部或外部缓冲器,研究中还发现部分国内标准技术要求不够明确,制造、检测和使用方对速差自控器相关标准理解存在偏差,是造成本次事故的间接原因。针对现有的部分速差自控器产品存在的质量问题,并根据现行最新标准和实际工作条件,提出改进了的检测方法和防范措施,从源头上防范坠落事故。     

Factors influencing the implementation of a safety management system for construction sites

The objective of the study was to determine the influential safety factors that governed the success of a safety management system for construction sites. The number of incidences among construction workers and the level of awareness on matters concerning safety were also determined. The study involved a self-administered three-part questionnaire among the workers and interviews with industry experts involved in brick-laying, concreting and in related assorted trades. Part A of the questionnaire concerned personal particulars, Part B involved training and experience and Part C was based on 28 industry-accepted safety factor elements. The construction sites ranged from high rise buildings, landed houses and infrastructure renovation. The sample size was 275. From the survey it was found that the most influential safety factor was personal awareness followed closely by communication. Suggestions and recommendations on equipment design and improved work practices and procedures to improve the efficiency and productivity of construction workers were proposed. Management was urged to get their workers better informed about safety matters.     

基于行为主义的建筑施工企业安全教育实验研究

结合行为主义反应性制约取向理论对建筑施工企业安全教育进行探讨, 建立企业安全教育刺激-反应S-O-R单元链,以安全帽使用教育为例进行实验设计,通过实验分析得到视觉听觉双重刺激形式的安全教育更容易引起人的安全行为反应,且行为保持性最佳;单纯视觉、听觉刺激形式的安全教育对人的安全行为反应作用基本一致,但采用听觉刺激安全教育产生的安全行为保持性较差,在第7个工作日后逐渐恢复到空白实验阶段。同时通过心理问卷调查,分析实验过程中人员心理变化与工作年限等因素对人员安全意识的影响,得到工作年限为1~2年的人员安全意识较低,过强的刺激将导致人员的过度恐惧反而使安全意识降低。最后,对企业现行安全教育方式提出几点改进措施,包括:正视安全教育刺激的重要性、保持性以及针对性;充分认识企业安全文化环境对安全教育的影响。     

我国煤矿劳动防护用品使用现状调查分析及对策研究

劳动防护用品是保障从业人员安全与健康的最后一道防线.本文在对全国部分重点产煤省份煤矿劳动防护用品现场调研的基础上,分析了不同类型煤矿劳动防护用品的现状及存在的问题,提出了进一步做好煤矿劳动防护用品管理工作的对策.     

基于熵权法-CIM模型的高速公路施工临近房屋安全风险评价

为了评估高速公路施工对临近房屋的安全影响,基于房屋因素、施工技术与管理因素、房屋周边环境因素,提出了高速公路施工临近房屋安全风险评价指标体系。以某高速公路施工临近10处房屋为研究对象,采用基于熵权法-CIM模型的混合安全风险评价方法,首先计算指标权重;再以其中1处房屋为例,确定其安全风险概率,结果表明:该处房屋安全风险总体较高,基本符合工程施工中的监测结果。