Preparation of Chitin/Cellulose Films Compatibilized with Polymeric Ionic Liquids

This paper reports the preparation of chitin/cellulose films compatibilized with polymeric ionic liquids. In-situ (co)polymerization of polymerizable ionic liquids, 1-(3-methacryloyloxypropyl)-3-vinylimidazolium bromide (1) and 1-methyl-3-vinylbenzylimidazolium chloride (3), was carried out in the presence of a radical initiator, AIBN, in the chitin/cellulose solution with ionic liquid solvents (1-butyl-3-methylimidazolium acetate and chloride, BMIMOAc and BMIMCl, respectively), followed by the appropriate procedure to give the desired films. The presence of the polymeric ionic liquid in the film was confirmed by the IR measurement. The powder X-ray diffraction analysis suggested that crystalline structures of the polysaccharides were largely disrupted in the film, as same as that of a chitin/cellulose film prepared by the AMIMOAc/BMIMCl system. These results were different from the XRD result of a chitin/cellulose film prepared by the 1-allyl-3-methylimidazolium bromide/BMIMCl system reported in our previous study, in which some crystalline structures were still remained in the film. Furthermore, the mechanical properties of the present films were evaluated by tensile testing, which were affected by the molar ratios of the polymeric ionic liquids to the polysaccharides and the compositional ratios of the two units 1 and 3.     

Preparation of Cellulose/Xanthan Gum Composite Films and Hydrogels Using Ionic Liquid

This paper reports the preparation of cellulose/xanthan gum composite films and hydrogels through gelation with an ionic liquid. Mixtures of cellulose and xanthan gum in desired weight ratios with an ionic liquid, 1-butyl-3-methylimidazolium chloride (BMIMCl), were thinly placed on a Petri dish and heated at 100 °C for 9 h to obtain the solutions. Then, the solutions were left standing at room temperature for 1 day for the progress of gelation. The resulting ion gels were subjected to Soxhlet extraction with ethanol to remove BMIMCl, followed by drying under ambient conditions to obtain the composite films. The crystalline structures of the polysaccharides and the mechanical properties were evaluated by powder X-ray diffraction measurement and tensile testing of the films, respectively. The ion gels in various cellulose/xanthan gum weight ratios, which were prepared in a test tube by the same procedure, were immersed in water for the exchange of disperse media to obtain the cellulose/xanthan gum composite hydrogels. Water contents of all the materials were higher than 90 %. The mechanical properties of the hydrogels were evaluated by compressive testing.     

Preparation of Galactomannan-Based Materials Compatibilized with Ionic Liquids

This paper reports the preparation of galactomannan/ionic liquid composite materials from the corresponding ion gels. Three kinds of galactomannans, that is, fenugreek gum (FG), guar gum (GG), and locust bean gum (LBG) and an ionic liquid of 1-butyl-3-methylimidazolium chloride (BMIMCl) were used. When the galactomannan/BMIMCl gels were immersed in ethanol, followed by dryness under reduced pressure, the galactomannan/BMIMCl composite materials were obtained. The crystalline structures of galactomannans in the materials were evaluated by the powder X-ray diffraction measurement. The mechanical property of the FG/BMIMCl composite material under compressive mode was superior compared with the GG and LBG/BMIMCl composite materials. Then, FG films compatibilized with polymeric ionic liquids (PILs) were also prepared by in situ radical polymerization of polymerizable ionic liquids, 1-(3-acryloyloxypropyl)-3-vinylimidazolium bromide and 1-methyl-3-vinylbenzylimidazolium chloride by AIBN in mixtures of FG with BMIMCl. The mechanical properties of the resulting films were affected by the FG/PIL ratios as well as the unit ratios in PILs.     

Biobased Contents of Organic Fillers and Polycaprolactone Composites with Cellulose Fillers Measured by Accelerator Mass Spectrometry Based on ASTM D6866

The biobased contents of raw materials such as starches, sugar, chitin, or wood powders for biomass plastics were measured using Accelerator Mass Spectrometry (AMS) based on ASTM D6866. AMS measures the isotope carbon ratio of ¹⁴C to ¹²C and ¹³C in graphite derived from sample powders. The biobased contents of starches, sugar or chitin were almost 100% which means that they are fully biobased. The biobased contents of the wood powders were over 140% due to the effect of the post 1950s ¹⁴C injection due to nuclear testing. Poly(ε-caprolactone) (PCL) composite samples were prepared using the polymerization and direct molding method. The starting compound was the ε-caprolactone monomer liquid combined with cellulose and inorganic fillers using aluminum triflate as a catalyst at 80 °C for 6 or 24 h. PCL cylinder-shaped composite samples with a homogeneously dispersed cellulose filler were prepared with M_n = 4,600 (M_w/M_n = 2.9). The biobased content of the PCL composite with 50 wt% cellulose filler (51.67%) measured using AMS was slightly higher than the carbon ratio of cellulose in the starting powder samples (41.3 mol%). This is due to the higher biobased content (112.70%) of the cellulose filler used in this study. The biobased content of the polymer composite powders by AMS was found not to be affected by the presence of inorganic fillers, such as talc.     

Rheology of Concentrated Cellulose Solutions in 1-Butyl-3-methylimidazolium Chloride

Rheological behavior of the concentrated cellulose/1-butyl-3-methylimidazolium chloride ([BMIM]Cl) solutions was investigated. As polymeric fluid, solutions of cellulose in [BMIM]Cl display a marked elastic behavior under shear flow. The dependence of the shear viscosity η, and of the dynamic modulus, on concentration, average degree of polymerization (DP) and temperature is discussed. At lower concentrations and degrees of polymerization (DP), cellulose solutions show viscous, inelastic behavior at low frequencies and low shear rate. At higher concentration and DP, cellulose solutions are more elastic at higher frequencies and shear rate. Such solutions also have some usual rheological properties. The dynamic rheological responses revealed that the Cox–Merz rule did not hold for these cellulose solutions at high deformation rate. Plotting storage modulus G′ against loss modulus G″ gave almost a master curve which is independent of temperature and concentration, with the slope of about 1.651 for 10 wt% cellulose solutions. This value indicates the existence of microheterogeneity in the solution system.     

Preparation of Cellulose Nanocrystals Using an Ionic Liquid

In this paper cellulose nanocrystals were prepared by treating microcrystalline cellulose with 1-butyl-3-methylimidazolium hydrogen sulphate ionic liquid. Cellulose nanocrystals, after separation from ionic liquid, were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), Field emission scanning electron microscopy (FESEM) Transmission Electron Microscope (TEM) and Thermogravimetric analysis. XRD results showed no changes in type of cellulose after the treatment with ionic liquid, however, high crystallinity index was observed in the ionic liquid treated sample. Cellulose nanocrystals, having length around 50–300 nm and diameter around 14–22 nm were observed in the ionic liquid treated sample under FESEM and TEM, and similar patterns of peaks as that of microcrystalline cellulose were observed for cellulose nanocrystals in the FTIR spectra. The thermal stability of the cellulose nanocrystals was measured low as compare to microcrystalline cellulose.     

All-Cellulose Composite Fibers Obtained by Electrospinning Dispersions of Cellulose Acetate and Cellulose Nanocrystals

All-cellulose composite fibers were produced by electrospinning dispersions containing cellulose acetate (CA) and cellulose nanocrystals (CNCs). Precursor polymer matrices were obtained after dispersion of CA with different degrees of substitution in a binary mixture of organic solvents. The obtained fibers of CA loaded with CNCs had typical widths in the nano- and micro-scale and presented a glass transition temperature of 145?°C. The CA component was converted to cellulose by using alkaline hydrolysis to yield all-cellulose composite fibers that preserved the original morphology of the precursor system. Together with Fourier Transform Infrared Spectroscopy fingerprints the thermal behavior of the all-cellulose composite fibers indicated complete conversion of cellulose acetate to regenerated cellulose. Noticeable changes in the thermal, surface and chemical properties were observed upon deacetylation. Not only the thermal transitions of cellulose acetate disappeared but the initial water contact angle of the web was reduced drastically. Overall, we propose a simple method to produce all-cellulose composite fibers which are expected to display improved thermo-mechanical properties while keeping the unique features of the cellulose polymer.     

Preparation and Characterization of Cellulose/Polypropylene Composite Using an Oxidatively Degraded Polypropylene

In this work, an oxidatively degraded polypropylene (DgPP) was studied as a novel coupling agent for fibrous cellulose (FC)/polypropylene (PP) composite. An optimal preparation time of PP thermal oxidative degradation was 18 h at 130 °C, and the DgPP had functional groups such as γ-lactone and acid groups. The spherulite observation of the DgPP suggested miscibility for the undegraded PP. The addition of the DgPP presented the transparency improvement of FC/PP composite, and this behavior was found to be originated from the grafted DgPP, which was produced by the esterification reaction between the of FC and the DgPP. The scanning electron microscope (SEM) observation showed that the grafted DgPP coated the FC surface, and the tensile strength of the FC/PP composite increased by an appropriate amount of the DgPP addition. These results suggested that the DgPP was suitable for the coupling agent of FC/PP composite.     

Experimental Investigation of Cellulose/Silver Nanocomposites Using In Situ Generation Method

Cellulose gel films were prepared by regeneration process using pre-cooled aq.(8 wt% LiOH + 15 wt% urea) mixture as solvent and ethyl alcohol as non solvent. The Terminus cattapa leaf extract diffused wet cellulose films were then dipped in 1–5 mM aq.AgNO₃ solutions to allow in situ generation of silver nanoparticles (AgNPs). Besides the in situ generation, some AgNPs were also formed outside the wet films in the solution. The AgNPs formed outside the films were observed under transmission electron microscope and scanning electron microscope. The nanocomposite films were also characterized by Fourier transform infrared spectroscopy, X-ray diffraction and thermogravimetric analysis and tensile test. The thermal stability of the composite films was lower than that of the matrix up to a temperature of ~300 °C and afterwards showed a reverse trend. The tensile strength of the nanocomposite films was found to be higher than the matrix but decreased with increasing concentration of aq.AgNO₃. The cellulose/AgNPs composite films showed good antibacterial activity against E. coli (gram positive) and Bacillus sp. (gram negative). Based on the aforementioned properties, the cellulose/AgNPs composite films can be considered for antibacterial packaging and medical applications.     

The effect of clay catalyst on the chemical composition of bio-oil obtained by co-pyrolysis of cellulose and polyethylene

Cellulose/polyethylene (CPE) mixture 3:1, w/w with and without three clay catalysts (K10 – montmorillonite K10, KSF – montmorillonite KSF, B – Bentonite) addition were subjected to pyrolysis at temperatures 400, 450 and 500 °C with heating rate of 100 °C/s to produce bio-oil with high yield. The pyrolytic oil yield was in the range of 41.3–79.5 wt% depending on the temperature, the type and the amount of catalyst. The non-catalytic fast pyrolysis at 500 °C gives the highest yield of bio-oil (79.5 wt%). The higher temperature of catalytic pyrolysis of cellulose/polyethylene mixture the higher yield of bio-oil is. Contrarily, increasing amount of montmorillonite results in significant, almost linear decrease in bio-oil yield followed by a significant increase of gas yield. The addition of clay catalysts to CPE mixture has a various influence on the distribution of bio-oil components. The addition of montmorillonite K10 to cellulose/polyethylene mixture promotes the deepest conversion of polyethylene and cellulose. Additionally, more saturated than unsaturated hydrocarbons are present in resultant bio-oils. The proportion of liquid hydrocarbons is the highest when a montmorillonite K10 is acting as a catalyst.     

A Two-Step Chemical Process for the Extraction of Cellulose Fiber and Pectin from Mulberry Branch Bark Efficiently

In this work, a two-step method for the extraction of pectin and cellulose fiber from mulberry branch bark, a by-product of sericultural industry, was described. The method was based on the acid extraction of pectin and subsequently alkali treatment for obtaining cellulose fibers. The obtained pectin was high purity with the total galacturonic acid content of 85.46% ± 2.76% and the degree of esterification of 71.13% ± 1.67%. The chemical composition analysis, FTIR spectroscopy, XRD and TG analysis were used to characterize the cellulose fiber at different processing stages. After the two-step chemical process, the cellulose content was increased from 37.38% in original bark to 92.60% in cellulose fiber. The FTIR spectra revealed the removal of pectin, hemicelluloses and lignin from the bark by acid extraction and alkali treatment. The XRD and TG results indicated that the obtained cellulose fibers were with the increased crystallinity and thermal stability, whose crystallinity and degradation temperature were 86.36% ± 5.56% and 355 °C, respectively. This work may provide a new approach for high utilization of mulberry branch bark.     

Preparation, Thermal Properties and Thermal Reliability of Form-Stable Paraffin/Polypropylene Composite for Thermal Energy Storage

This study is focused on the preparation, characterization, and determination of thermal properties and thermal reliability of paraffin/polypropylene (PP) composite as a novel form-stable phase change material (PCM) for thermal energy storage applications. In the composite, paraffin acts as a PCM when PP is operated as supporting material. The composites prepared at different mass fractions of paraffin (50, 60, 70, 80, and 90 w/w%) by solution casting method were subjected to leakage test by heating the composites over the melting temperature of the PCM. The paraffin/PP composite (70/30 w/w%) is found as the maximum paraffin containing composite and was characterized using Fourier transform infrared spectroscopy, optic microscopy, differential scanning calorimetry (DSC), and thermal gravimetric analysis (TGA) techniques. DSC analysis indicated that the form-stable paraffin/PP composite melts at 44.77–45.52 °C and crystallizes at 53.55–54.80 °C. It has latent heats of 136.16 and −136.59 J/g for melting and crystallization, respectively. These thermal properties make it potential PCM for latent heat thermal energy storage (LHTES) purposes such as solar space heating applications. Accelerated thermal cycling tests indicated that the form-stable PCM had good thermal reliability. TGA also showed that the form-stable PCM degrades in two distinguishable steps and had good chemical stability.     

Desiccation of contaminant barrier materials amended with aqueous carboxymethyl cellulose solution

The stabilization potential of negatively charged sodium carboxymethyl cellulose (CMC) solution was assessed through investigation of its retention on clays under environmental conditions that promote soil desiccation. Sodium montmorillonite and kaolinite, commonly used in clayey soils, were mixed with aqueous CMC solutions in concentrations ranging from 0 to 10 g/L. These samples were dried in a specially-designed desiccation chamber which was operated at a temperature of 25°C and relative humidity of 30%. The results show an inverse proportionality between liquid loss and CMC concentration. Liquid loss from clayey soil follows the first-order reaction with a rate constant in the range of 4.6–6.7 mg/h. CMC half-lives on sodium montmorillonite during desiccation ranged from 103 to 181 h for an aqueous concentration range of 0.5–10 g/L compared to 108 h for distilled water. For kaolinite, more liquid was retained at 10 g/L CMC concentration than at other concentrations, but liquid retention was generally insignificant. These conclusions are valid for a desiccation duration of 890 h, a time that is reasonably simulative of the duration of exposures of bare ground surfaces to weather elements. The experimental results are explained in terms of the role of CMC molecular interactions with clay minerals in controlling fluid flow to desiccating clay surfaces.     

Preparation of Natural Rubber/Condensed Tannin Semi-interpenetrating Polymer Network Composites by Hematin-Catalyzed Cross-Linking

In this study, the preparation of semi-interpenetrating polymer network (semi-IPN) composites composed of natural rubber and condensed tannin was performed by means of the enzyme-mimetic cross-linking of condensed tannin catalyzed by hematin. Prior to the preparation of the composites, the hematin-catalyzed cross-linking behavior of condensed tannin was evaluated by the TGA measurement. The TGA results indicated that condensed tannin was sufficiently cross-linked by the hematin-catalyzed reaction in the presence of appropriate amounts of 30% (w/v) H₂O₂ aq. to give the relatively thermostable materials. For the preparation of the composites, a solution of condensed tannin and hematin, and subsequently 30% (w/v) H₂O₂ aq. were added to natural rubber latex and the mixture was stirred at room temperature for 10 min to perform the cross-linking of condensed tannin, followed by drying of the reaction mixture at 50 °C for 5 h, which was subsequently put into a heat device and hot-pressed at 100 °C and 20 MPa for 20 min to give the semi-IPN composite. The tensile stress?Cstrain measurement of the composites was conducted to evaluate the mechanical properties, which were changeable depending on the weight ratios of natural rubber to condensed tannin and the amounts of 30% (w/v) H₂O₂ aq. Moreover, the miscibility of the cross-linked tannin with natural rubber in the composite was evaluated by the SEM measurement.     

Development of Regenerated Cellulose/Citric Acid Films with Ionic Liquids

Nowadays, the importance of green and biodegradable plastics as viable substitutes for non-degradable petroleum-based materials is felt more than ever. Regenerated cellulose (RC) as a potential candidate suffers from poor processability and inferior properties, limiting its wide applications. In this study, it is demonstrated that citric acid (CA) enhances physical, mechanical, and thermal properties of RC films, due to RC-citric acid compatibility. 1-ethyl-3-methylimidazolium chloride (EMIMCl) as a green ionic liquid was employed for the processing of RC. The optimum properties in terms of thermal stability, mechanical strength, contact angle, water uptake, and oxygen permeability were achieved at 10 wt% of CA. However, further incorporation of CA adversely affected the film properties. This behaviour was explained by the crosslinking and plasticizing effects of CA. Furthermore, in vitro cytotoxicity test demonstrated that RC/CA films are cytocompatible, suggesting the potential advantage of using these biopolymeric films for biomaterial and biological applications.

     

Preparation of Cationic/Anionic Chitin Nanofiber Composite Materials

In this study, we investigated the preparation of cationic/anionic chitin nanofiber (CNF) composite materials by electrostatic interaction. An aqueous dispersion of amidinium CNF was prepared by a top-down approach, and a maleylated CNF film was obtained by a bottom-up approach from a chitin ion gel in an ionic liquid with subsequent maleylation on the CNFs. The resulting film was dispersed in ammonia (aq), which was then mixed with the aqueous cationic CNF dispersion to give the composite film. The composition of the two CNFs was evaluated by scanning electron microscopy and X-ray diffraction measurements. Tensile testing results indicated that the mechanical properties of the composites were enhanced with increasing degrees of substitution of the cationic and anionic groups on CNFs, and also when the molar ratio of these groups approached 1:1. The dissociation of the two kinds of CNFs by alkaline treatment of the composite film was achieved, suggesting the presence of an electrostatic interaction among the interactions between them.     

Kinetic modeling of enzymatic hydrolysis of pretreated kitchen wastes for enhancing bioethanol production

It is well known that use of low cost and abundant waste materials in microbial fermentations can reduce product costs. Kitchen wastes disposed of in large amounts from cafeterias, restaurants, dining halls, food processing plants, and household kitchens contain high amounts of carbohydrate components such as glucose, starch, and cellulose. Efficient utilization of these sugars is another opportunity to reduce ethanol costs. In this study, the effect of pretreatment methods (hot water, acid solutions, and a control) on enzymatic hydrolysis of kitchen wastes was evaluated using a kinetic modeling approach. Fermentation experiments conducted with and without traditional fermentation nutrients were assessed at constant conditions of pH 4.5 and temperature of 30 °C for 48 h using commercial dry baker’s yeast, Saccharomyces cerevisiae. The control, which involved no treatment, and hot water treated samples gave close glucose concentrations after 6 h. The highest and lowest rates of glucose production were found as 0.644 and 0.128 (h^?1) for the control (or no-pretreated (NPT)) and 1% acid solutions, respectively. The fermentation results indicated that final ethanol concentrations are not significantly improved by adding nutrients (17.2–23.3 g/L). Thus, it was concluded that product cost can be lowered to a large extent if (1) kitchen wastes are used as a substrate, (2) no fermentation nutrient is used, and (3) hydrolysis time is applied for about 6 h. Further optimization study is needed to increase the yield to higher levels.     

Synthesis and Characterization of a Thin-Film Composite Nanofiltration Membrane Based on Polyamide-Cellulose Acetate: Application for Water Purification

Membrane separation has been widely used for various applications including microfiltration (MF), ultrafiltration (UF), and nanofiltration (NF) processes in the fields of biomedicine, food, and water purification. In this work, a facile synthesis of new polyamide thin-film composite nanofiltration membranes (NF-TFC) for water purification was described. The polyamide thin film was deposed over a synthetic cellulose acetate (CA) support by interfacial polymerization method. 1,3 cyclohexane bis (methylamine) (CHMA) and trimesoyl chloride (TMC) were used as monomers. The membranes were characterized using Scanning Electron Microscopy (SEM), Fourier Transform Infrared spectroscopy (FT-IR), water uptake, porosity, contact angle, water permeability and rejection towards specific salt and dye molecules. The effect of the variation of the CHMA concentration (0.2–2 wt.%) on the morphology, porosity, water permeation and rejection properties of the prepared membranes was studied. SEM results displayed the growth of the membrane thickness when the CHMA concentration increased from 0.2 to 2 wt.%. The strong adhesion between the cellulose acetate substrate and the polyamide layer explained by the formation of the polyamide film in the substrate surface and inside the pores. The water permeability varied from 36.02 to 17.09 L h^?1 m^?2 bar^?1. The salt rejection of Na₂SO₄ and NaCl increased from 9 to 68% and from 38.41% to 89.4%, respectively, when the CHMA concentration was changed from 0.2 to 2 wt.%. The prepared membranes were further applied successfully for the removal of malachite green and congo red. The results indicated that the maximum rejection reached 89% and 85% for malachite green and congo red, respectively.

     

Utilization of blended fluidized bed combustion (FBC) ash and pulverized coal combustion (PCC) fly ash in geopolymer

In this paper, synthesis of geopolymer from fluidized bed combustion (FBC) ash and pulverized coal combustion (PCC) fly ash was studied in order to effectively utilize both ashes. FBC-fly ash and bottom ash were inter-ground to three different finenesses. The ashes were mixed with as-received PCC-fly ash in various proportions and used as source material for synthesis of geopolymer. Sodium silicate (Na₂SiO₃) and 10 M sodium hydroxide (NaOH) solutions at mass ratio of Na₂SiO₃/NaOH of 1.5 and curing temperature of 65 °C for 48 h were used for making geopolymer. X-ray diffraction (XRD), scanning electron microscopy (SEM), degree of reaction, and thermal gravimetric analysis (TGA) were performed on the geopolymer pastes. Compressive strength was also tested on geopolymer mortars. The results show that high strength geopolymer mortars of 35.0–44.0 MPa can be produced using mixture of ground FBC ash and as-received PCC-fly ash. Fine FBC ash is more reactive and results in higher degree of reaction and higher strength geopolymer as compared to the use of coarser FBC ash. Grinding increases reactivity of ash by means of increasing surface area and the amount of reactive phase of the ash. In addition, the packing effect due to fine particles also contributed to increase in strength of geopolymers.     

Synthesis of Polyurethane and Characterization of its Composites Based on Alfa Cellulose Fibers

Polyurethane (PU) based on polycaprolactone (PCL) and 4,4′ diphenyl methylene diisocyanate (MDI) was synthesized using a two-step method. The PU obtained was then blended with various amounts of cellulose extracted from alfa stems to prepare composite materials. The influence of cellulose on the thermal and mechanical properties of different composites was demonstrated by means of several characterization techniques such as Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM)…