Vermicomposting of source-separated human faeces by Eisenia fetida: effect of stocking density on feed consumption rate, growth characteristics and vermicompost production

The main objective of the present study was to determine the optimum stocking density for feed consumption rate, biomass growth and reproduction of earthworm Eisenia fetida as well as determining and characterising vermicompost quantity and product, respectively, during vermicomposting of source-separated human faeces. For this, a number of experiments spanning up to 3 months were conducted using soil and vermicompost as support materials. Stocking density in the range of 0.25-5.00 kg/m² was employed in different tests. The results showed that 0.40-0.45 kg-feed/kg-worm/day was the maximum feed consumption rate by E. fetida in human faeces. The optimum stocking densities were 3.00 kg/m² for bioconversion of human faeces to vermicompost, and 0.50 kg/m² for earthworm biomass growth and reproduction.     

Optimizing vermistabilization of waste activated sludge using vermicompost as bulking material

An integrated composting-vermicomposting system has been developed for stabilization of waste activated sludge (WAS) using matured vermicompost as bulking material and Eisenia fetida as earthworm species. Composting was considered as the main processing unit and vermicomposting as polishing unit. The integrated system was optimized by successive recycling and mixing of bulking material with WAS during composting and examining the effects of environmental condition (i.e. temperature: 10-30 °C and relative humidity: 50 and 90%) and stocking density (0-5 kg/m²) on vermicomposting. The composting stage resulted in sufficient enrichment of bulking material with organic matter after 20 cycles of recycling and mixing with WAS and produced materials acceptable for vermicomposting. Vermicomposting of composted material caused significant reduction in pH, volatile solids (VS), specific oxygen uptake rate (SOUR), total carbon (TC), total organic carbon (TOC), C/N ratio and pathogens and a substantial increase in electrical conductivity (EC), total nitrogen (TN) and total phosphorous (TP). The environmental conditions (i.e. temperature: 10-30 °C and relative humidity: 50 and 90%) and stocking density (0-5 kg/m²) have profound effects on vermicomposting. Temperature of 20 °C with high humidity is the best suited environmental condition for vermicomposting employing E. fetida. The favorable stocking density range for vermiculture is 0.5-2.0 kg/m² (optimum: 0.5 kg/m²) and for vermicomposting is 2.0-4.0 kg/m² (optimum: 3.0 kg/m²), respectively. The integrated composting-vermicomposting system potentially stabilizes and converts the hazardous WAS into quality organic manure for agronomic applications without any adverse effects.     

Continuous-feeding vermicomposting as a recycling management method to revalue tomato-fruit wastes from greenhouse crops

Huge quantities of discarded fruits generated from greenhouse crops represent a worldwide environmental problem. The aim of this work was to assess the efficiency of vermicomposting as a recycling management option for biotransforming tomato-fruit wastes from greenhouses into an organic nutrient-rich product available for agricultural purposes. A pilot vermireactor was constructed. It was provided with a manure layer, where an initial population of Eisenia fetida was introduced and fed continuously at a high organic loading rate (13.6 kg TOC m^?3 wk^?1) for 150 days. Vermicompost chemical and enzymatic parameters as well as the bacterial and fungal community structure were determined for 210 days (vermicomposting plus a maturation period). Earthworm biomass increased after 90 days, and then declined due to increasing pH, electrical conductivity and ammonium concentration. The temporal patterns of dehydrogenase, β-glucosidase, protease and urease were related to earthworm growth and the stabilization of organic matter. Bacterial DGGE profiles differed between the period of degradation of labile substrates and the maturation step. Fungal communities at the stage of maximum earthworm biomass differed most, suggesting a gut passage effect. The end product was chemically stable and enriched in nutrients, demonstrating that tomato-fruit wastes can be successfully vermicomposted into a valuable soil amendment. We suggest continuous-feeding vermicomposting as an environmentally sound management option for greenhouse wastes.     

Vermicomposting of source-separated human faeces for nutrient recycling

The present study examined the suitability of vermicomposting technology for processing source-separated human faeces. Since the earthworm species Eisenia fetida could not survive in fresh faeces, modification in the physical characteristics of faeces was necessary before earthworms could be introduced to faeces. A preliminary study with six different combinations of faeces, soil and bulking material (vermicompost) in different layers was conducted to find out the best condition for biomass growth and reproduction of earthworms. The results indicated that SVFV combination (soil, vermicompost, faeces and vermicompost – bottom to top layers) was the best for earthworm biomass growth indicating the positive role of soil layer in earthworm biomass growth. Further studies with SVFV and VFV combinations, however, showed that soil layer did not enhance vermicompost production rate. Year-long study conducted with VFV combination to assess the quality and quantity of vermicompost produced showed an average vermicompost production rate of 0.30 kg-cast/kg-worm/day. The vermicompost produced was mature as indicated by low dissolved organic carbon (2.4 ± 0.43 mg/g) and low oxygen uptake rate (0.15 ± 0.09 mg O₂/g VS/h). Complete inactivation of total coliforms was noted during the study, which is one of the important objectives of human faeces processing. Results of the study thus indicated the potential of vermicomposting for processing of source-separated human faeces.     

Sludge earthworm composting technology by Eisenia fetida

Prior to vermicompost application to the soils, there is a need to determine the heavy metal concentrations in the final vermicomposts. Acute toxicity on Eisenia fetida for copper (Cu) and cadmium (Cd) were conducted by artificial soils tests. The dosage of interest is typically the median lethal concentration (LC₅₀) that will kill 50 % of the population of organisms within the test period. The dry artificial soil is pre-moistened 1 or 2 days before the test by adding deionized water to obtain approximately half of the required final water content of 40–60 % of the maximum water holding capacity. The 14-day LC₅₀ values (95 % confidence interval) for Cu and Cd were 530 (450–624) and 1118 (988–1265) mg kg^?1, respectively. The vermicomposting was designed to evaluate the effects of earthworm activity on heavy metals in sewage sludge. Compared with the sludge before vermicomposting by Eisenia fetida, the results are as follows: (1) water content, the pH value and organic matter content decreased, (2) total nitrogen content increased, total phosphorus content and total potassium content decreased, (3) available nitrogen concentration, available phosphorus content increased, and (4) the total content of five metals (Cu, Ni, Cd, Pb and Zn) decreased, and the bioaccumulation factor shows that vermicomposting can efficiently remove heavy metals. Therefore, it can be concluded that the soil use of sludge of the Wastewater Treatment Plant in Huaibei is feasible.     

Effect of microbial inoculation during vermicomposting of different organic substrates on microbial status and quantification and documentation of acid phosphatase

In this experiment, three microbial strains were inoculated in two different organic wastes to study their effect on the humic acids content, acid phosphatase activity and microbial properties of the final stabilized products. Pyrophosphate extract of vermicomposts were analyzed through polyacrylamide gel electrophoresis to study the nature of a isozymes in different treatments. Results suggested that vermicomposting increased humic acids content and acid phosphatase activity in organic substrates and microbial inoculation further enhanced the rate of humification and enzyme activity. Although humic acids content in different microorganism-inoculated vermicomposts were statistically at par, acid phosphatase activity in these treatments was significantly (P<0.05) different. Results revealed that microbial respiration was increased due to vermicomposting, but a reduction in microbial biomass was recorded after stabilization of organic wastes. Although vermicomposting increased the value of microbial quotient (qCO(2)), microbial inoculation did not show any significant effect on qCO(2). The zymogram revealed that two isozymes of acid phosphatase (group II and group III) were present in all vermicompost samples and higher acid phosphatase activity in fungi-inoculated vermicomposts might be due to the presence of an additional isozyme (group I) of acid phosphatase.     

Changes in enzymatic activities and microbial properties in vermicompost of water hyacinth as affected by pre-composting and fungal inoculation: A comparative study of ergosterol and chitin for estimating fungal biomass

In this experiment, three different fungal species, viz. Trichoderma viridae, Aspergillus niger and Phanerochaete chrysosporium, were inoculated in 7 day and 15 day partially decomposed water hyacinth to study their effect on enzymatic activities, microbial respiration and fungal biomass of the final stabilized product. The results suggested that increasing the duration of pre-composting from 7 days to 15 days did not show any significant effect on the activities of hydrolytic enzymes. Inoculation of fungi significantly (P ? 0.05) increased cellulase, protease and acid and alkaline phosphatase activities. The highest value of ergosterol was recorded in A. niger-inoculated vermicomposts. Inoculation of P. chrysosporium in initial organic waste registered the highest chitin content in vermicompost. A comparison of fungal biomass and chitin content revealed a conversion factor of 2.628 with a standard deviation of 0.318. Due to significant correlation (r = 0.864), this conversion factor allows for the calculation of fungal biomass from chitin, which is comparatively more stable than ergosterol.     

Changes in microbial properties and nutrient dynamics in bagasse and coir during vermicomposting: Quantification of fungal biomass through ergosterol estimation in vermicompost

In this experiment, different microorganisms viz., Trichoderma viridae, Aspergillus niger and Bacillus megaterium were inoculated in bagasse and coir with the objective to study their effect on nutrient dynamics and microbial properties, specially effect on fungal status in these waste materials. Fungal biomass (FBC) was calculated from the ergosterol content in the vermicompost samples. Inoculation of B. megaterium registered comparatively higher TP content in the final stabilized product. Vermicomposting increased microbial biomass carbon (MBC) and nitrogen (MBN) content in bagasse and coir. Microbial biomass carbon to nitrogen ratio (MBC/ MBN) was comparatively narrower in fungi inoculated vermicomposts and FBC/MBC ratio was increased up to 11.69 from 9.51 of control during vermicomposting.     

Optimization of Eisenia fetida stocking density for the bioconversion of rock phosphate enriched cow dung–waste paper mixtures

Vermitechnology is gaining recognition as an environmental friendly waste management strategy. Its successful implementation requires that the key operational parameters like earthworm stocking density be established for each target waste/waste mixture. One target waste mixture in South Africa is waste paper mixed with cow dung and rock phosphate (RP) for P enrichment. This study sought to establish optimal Eisenia fetida stocking density for maximum P release and rapid bioconversion of RP enriched cow dung–paper waste mixtures. E. fetida stocking densities of 0, 7.5, 12.5, 17.5 and 22.5 g-worms kg^?1 dry weight of cow dung–waste paper mixtures were evaluated. The stocking density of 12.5 g-worms kg^?1 resulted in the highest earthworm growth rate and humification of the RP enriched waste mixture as reflected by a C:N ratio of <12 and a humic acid/fulvic acid ratio of >1.9 in final vermicomposts. A germination test revealed that the resultant vermicompost had no inhibitory effect on the germination of tomato, carrot, and radish. Extractable P increased with stocking density up to 22.5 g-worm kg^?1 feedstock suggesting that for maximum P release from RP enriched wastes a high stocking density should be considered.     

Solid waste management of temple floral offerings by vermicomposting using Eisenia fetida

Recycling of temple waste (TW) mainly comprising of floral offerings was done through vermitechnology using Eisenia fetida and its impact on seed germination and plant growth parameters was studied by comparing with kitchen waste (KW) and farmyard waste (FYW) vermicompost (VC). The worm biomass was found to be maximum in TW VC compared to KW and FYW VCs at both 40 and 120 days old VCs. Physico-chemical analysis of worm-worked substrates showed better results in TW VC especially in terms of electrical conductivity, C/N, C/P and TK. 10% TW VC–water extract (VCE) showed stimulatory effect on germination percentage of chickpea seeds while KW and FYW VCE proved effective at higher concentration. Variation in growth parameters was also observed with change in the VC–soil ratio and TW VC showed enhanced shoot length, root length, number of secondary roots and total biomass at 12.5% VC compared to KW and FYW VC.     

Recycling and valorization of distilled grape marc through vermicomposting: a pilot-scale study

The present study sought to evaluate the effectiveness of vermicomposting for the valorization of distilled grape marc, one of the main solid by-products of the winery sector during a 56-day pilot-scale trial. The increase in the density and biomass of earthworms (Eisenia andrei) during the earlier stages of the process reflected the suitability of the distilled marc (Vitis vinifera L. cv. Mencía) as feedstock in order to sustain large earthworm populations on a pilot-scale level. Supporting this, from 14 days onwards the pH of Mencía distilled marc fell within weak-alkaline levels and the electrical conductivity was between 0.21 and 0.11 mS cm⁻² providing optimum conditions for earthworm growth. A rapid decrease in microbial activity as well as in the content of total polyphenols, both indicative of stabilized materials was also recorded after 14 days of vermicomposting. Moreover, the content of macro- and micronutrients in the end product matched with those considered to have the quality criteria of a good vermicompost with respect to plant health and safe agricultural use. Altogether, it underlines the feasibility of vermicomposting as an environment-friendly approach for the biological stabilization of distilled grape marc fulfilling both environmental protection and fertilizer production.

     

Ecotoxicity of wastes in avoidance tests with Enchytraeus albidus,Enchytraeus crypticus and Eisenia fetida (Oligochaeta)

Contact bioassays are important for testing the ecotoxicity of solid materials. However, survival and reproduction tests are often not practical due to their duration which may last for several weeks. Avoidance tests with soil invertebrates may offer an alternative or extension to the classic test batteries due to their short duration (days rather than weeks) and due to a sensitive sub-acute endpoint (behavior). The aims of our study were: (a) to evaluate the effects of three solid industrial wastes (incineration ash, contaminated wood chips and contaminated soil) on three Oligochaeta species (enchytraeids Enchytraeus albidus, Enchytraeus crypticus and earthworm Eisenia fetida) in avoidance tests; (b) to compare the sensitivity among the species and to compare results of avoidance test to reproduction tests; (c) to elucidate if measuring the weight in the earthworm avoidance test could be reasonable additional endpoint. Avoidance mostly increased with the increasing percent of waste in the mixture showing a dose–response curve. E. fetida was the most sensitive species and E. crypticus the least one. An additional endpoint, (changes in weight after two-day exposure) was not found to be more sensitive than avoidance reaction, but it confirmed that earthworms staying in the highest concentrations of the waste mixture were affected showing apparent weight reduction. Our results indicate that avoidance tests with earthworms and enchytraeids are feasible for waste testing.     

Using the residue of spirit production and bio-ethanol for protein production by yeasts

The residue (vinasse) formed during the distillation of bio-ethanol and cachaça, a traditional rum-type spirit produced from sugar-cane in Brazil, is highly harmful if discharged into the environment due to high values of COD and BOD. One possibility for minimizing the impact of vinasse in soils and waters is to use the residue in the production of microbial biomass for use as an animal feed supplement that will provide high levels on nitrogen (>9% d.m.) and low content of nucleic (?10% d.m.) This paper reports the production and quality of biomass produced from fermentation of Saccharomycescerevisiae and Candidaparapsilosis in culture media under 12 different culture conditions and the respective effects of each variable (glucose, yeast extract, peptone, potassium phosphate, vinasse, pH and temperature). Of the S. cerevisiae isolates tested, two (VR1 and PE2) originating from fuel alcohol-producing plants were identified as offering the best potential for the industrial production of single cell protein from vinasse due to highest biomass productivity. Our results showed a potential viable and economic use of vinasse.     

Ethanol production from banana peels using statistically optimized simultaneous saccharification and fermentation process

Dried and ground banana peel biomass (BP) after hydrothermal sterilization pretreatment was used for ethanol production using simultaneous saccharification and fermentation (SSF). Central composite design (CCD) was used to optimize concentrations of cellulase and pectinase, temperature and time for ethanol production from BP using SSF. Analysis of variance showed a high coefficient of determination (R²) value of 0.92 for ethanol production. On the basis of model graphs and numerical optimization, the validation was done in a laboratory batch fermenter with cellulase, pectinase, temperature and time of nine cellulase filter paper unit/gram cellulose (FPU/g-cellulose), 72 international units/gram pectin (IU/g-pectin), 37 °C and 15 h, respectively. The experiment using optimized parameters in batch fermenter not only resulted in higher ethanol concentration than the one predicted by the model equation, but also saved fermentation time. This study demonstrated that both hydrothermal pretreatment and SSF could be successfully carried out in a single vessel, and use of optimized process parameters helped achieve significant ethanol productivity, indicating commercial potential for the process. To the best of our knowledge, ethanol concentration and ethanol productivity of 28.2 g/l and 2.3 g/l/h, respectively from banana peels have not been reported to date.     

Fluorescence excitation-emission matrix combined with regional integration analysis to characterize the composition and transformation of humic and fulvic acids from landfill at different stabilization stages

Fluorescence excitation-emission matrix spectroscopy (EEMs) combined with fluorescence regional integration (FRI) analysis was used to investigate the composition and transformation of humic acid (HA) and fulvic acid (FA) from landfill. The EEMs of HAs at different landfill ages were characterized by two typical fluorescence chromophores with Ex/Em pairs at Ex = 420-470 nm/Em = 490-530 nm and Ex = 345-375 nm/Em = 450-465 nm. EEMs of FA were featured by other two distinctly different fluorophores with Ex/Em pairs at Ex = 315-335 nm/Em = 420-440 nm and Ex = 255-275 nm/Em = 425-455 nm. The results show that HA extracted from the refuse disposed in the year of 1989 was formed by connecting small-condensed aromatic structures with protein-like chains. Compared with HA extracted from the refuse disposed in the year of 1992, HA extracted from the refuse of 1996 had a higher fluorescence intensity and lower r_(B,A) (the ratio of the fluorescence intensities of peak B and peak A) value. It contained low molar mass components, low aromatic condensation degree, and more easily oxidized substituents. This indicates that the landfill time strongly affects the EEMs characteristics of HA, and that the humification degree of HA increases with the landfill time. A red shift to a longer wavelength region and an increase of fluorescence intensity were observed when the concentration of HA was increased, suggesting that concentration had a great influence on the fluorescence characteristics of HAs. pH (2-12) also had significant effects on the fluorescence intensity, although it exerted no effect on the peak position of fluorescence of HA and FA. The results of FRI show that increasing concentration lead to more interactions among various structure components and that small molecular weight units tend to aggregate or be masked into more complicated and larger structures. The pH influence on the fluorescence intensity of HA seems mainly through molecular configuration, while the fluorescence intensity change with pH may be due to various substituents of FA.     

Microbial inoculants for small scale composting of putrescible kitchen wastes

This research looked at the need for ligno-cellulolytic inoculants (EM bacteria and Trichoderma sp.) in small to medium scale composting of household wastes. A mixture of household organic waste comprised of kitchen waste, paper, grass clippings and composted material was subjected to various durations of thermo composting followed by vermicomposting with and without microbial inoculants for a total of 28 days. The results revealed that ligno-celluloytic inoculants are not essential to speed up the process of composting for onsite small scale household organic waste treatment as no significant difference was observed between the control and those inoculated with Trichoderma and EM in terms of C:N ratio of the final product. However, it was observed that EM inoculation enhanced reproductive rate of earthworms, and so probably created the best environment for vermicomposting, in all treatment groups.     

Efficiency of physicochemical and biological treatments of vinasse and their influence on indigenous microbiota for disposal into the environment

Molasses-based distilleries are one of the most polluting industries generating large volumes of high strength wastewater called vinasse. Different processes covering anaerobic, aerobic as well as physicochemical methods have been employed to treat this effluent. This study evaluated the microbial communities present in the vinasse during different stages of its treatment by traditional and molecular methods. The analysis of the efficiency of each treatment was performed by physicochemical parameters and toxicity analysis. The treatment of vinasse was performed in the following steps: high flow fermentation; filtration; chemical flakes; low-flow fermentation; filtration; and neutralization. The physicochemical analysis in different stages of the vinasse treatment demonstrated that phases of treatment influenced the performance of the evaluated parameters. Among the 37 parameters, 9 were within the limits established by the Commission for Environmental Policy of Minas Gerais, Brazil (COPAM), especially BOD (96.7% of pollution reduction), suspended solids (99.9%), pH, copper (88%), iron (92.9%), and manganese (88%). Some parameters, even after treatment, did not fit the maximum allowed by legislation. The microbial population decreased reaching 3 log CFU/ml present in the steps of the flakes chemical and disinfection treatment of vinasse. Lactobacillus brevis and Pichia kudriavzevii were present in all stages of the treatments, showing that these microorganisms were resistant and demonstrated that they might be important in the treatment of vinasse. The vinasse showed a significant reduction of pollution load after the disinfection treatment however still should not be discarded into water bodies because the high values of tannins and sediment solids, but suggest the use of the effluent in the cooling coil during the distillation process of the beverage.     

Fate and distribution of nitrogen in soil and plants irrigated with landfill leachate

Landfill leachate contains a high concentration of ammoniacal substances which can be a potential supply of N for plants. A bioassay was conducted using seeds of Brassica chinensis and Lolium perenne to evaluate the phytotoxicity of the leachate sample. A soil column experiment was then carried out in a greenhouse to study the effect of leachate on plant growth. Two grasses (Paspalum notatum and Vetiver zizanioides) and two trees (Hibiscus tiliaceus and Litsea glutinosa) were irrigated with leachate at the EC50 levels for 12 weeks. Their growth performance and the distribution of N were examined and compared with columns applied with chemical fertilizer. With the exception of P. notatum, plants receiving leachate and fertilizer grew better than those receiving water alone. The growth of L. glutinosa and V. zizanioides with leachate irrigation did not differ significantly from plants treated with fertilizer. Leachate irrigation significantly increased the levels of NH_x-N in soil. Although NO_x-N was below 1 mg N L⁻¹ in the leachate sample, the soil NO_x-N content increased by 9-fold after leachate irrigation, possibly as a result of nitrification. Leachate irrigation at EC50 provided an N input of 1920 kg N ha⁻¹ over the experimental period, during which up to 1050 kg N ha⁻¹ was retained in the soil and biomass, depending on the type of vegetation. The amount of nutrient added seems to exceed beyond the assimilative capability. Practitioners should be aware of the possible consequence of N saturation when deciding the application rate if leachate irrigation is aimed for water reuse.     

Cost-effective approach to ethanol production and optimization by response surface methodology

Food wastes disposed from residential and industrial kitchens have gained attention as a substrate in microbial fermentations to reduce product costs. In this study, the potential of simultaneously hydrolyzing and subsequently fermenting the mixed carbohydrate components of kitchen wastes were assessed and the effects of solid load, inoculum volume of baker’s yeast, and fermentation time on ethanol production were evaluated by response surface methodology (RSM). The enzymatic hydrolysis process was complete within 6 h. Fermentation experiments were conducted at pH 4.5, a temperature of 30 °C, and agitated at 150 rpm without adding the traditional fermentation nutrients. The statistical analysis of the model developed by RSM suggested that linear effects of solid load, inoculum volume, and fermentation time and the quadratic effects of inoculum volume and fermentation time were significant (P < 0.05). The verification experiments indicated that the developed model could be successfully used to predict ethanol concentration at >90% accuracy. An optimum ethanol concentration of 32.2 g/l giving a yield of 0.40 g/g, comparable to yields reported to date, was suggested by the model with 20% solid load, 8.9% inoculum volume, and 58.8 h of fermentation. The results indicated that the production costs can be lowered to a large extent by using kitchen wastes having multiple carbohydrate components and eliminating the use of traditional fermentation nutrients from the recipe.     

Dry-thermophilic anaerobic digestion of organic fraction of municipal solid waste: methane production modeling

The influence of particle size and organic matter content of organic fraction of municipal solid waste (OFMSW) in the overall kinetics of dry (30% total solids) thermophilic (55 °C) anaerobic digestion have been studied in a semi-continuous stirred tank reactor (SSTR). Two types of wastes were used: synthetic OFMSW (average particle size of 1 mm; 0.71 g Volatile Solids/g waste), and OFMSW coming from a composting full scale plant (average particle size of 30 mm; 0.16 g Volatile Solids/g waste).A modification of a widely-validated product-generation kinetic model has been proposed. Results obtained from the modified-model parameterization at steady-state (that include new kinetic parameters as K, Y_pMAX and θ_MIN) indicate that the features of the feedstock strongly influence the kinetics of the process. The overall specific growth rate of microorganisms (μ_max) with synthetic OFMSW is 43% higher compared to OFMSW coming from a composting full scale plant: 0.238 d⁻¹ (K = 1.391 d⁻¹; Y_pMAX = 1.167 L CH₄/gDOC_c; θ_MIN = 7.924 days) vs. 0.135 d⁻¹ (K = 1.282 d⁻¹; Y_pMAX = 1.150 L CH₄/gDOC_c; θ_MIN = 9.997 days) respectively.Finally, it could be emphasized that the validation of proposed modified-model has been performed successfully by means of the simulation of non-steady state data for the different SRTs tested with each waste.