The Role Played by Acetyl Group Distribution Patterns in Substituted Starch Toward Enzymatic De-acetylation and Chain Fragmentation

The nature and distribution of the acetylated groups were evaluated by ¹³C-NMR and ¹H-NMR. The starch substrate with a DS of 1.5 comprises only two patterns: -(14)-d-glucopyranose and 2,3,6-tri-O-acetyl--(14)-d-glucopyranose. The starch with a DS of 3.0 also comprises two patterns: 2,3,4,6-tetra-O-acetyl--(14)-d-glucopyranose and 2,3,6-tri-O-acetyl--(14)-d-glucopyranose; whereas starch (DS = 1.9) contains 4 patterns: 2,3,6-tri-O-acetyl--(14)-d-glucopyranose, 2,3,4,6-tetra-O-acetyl--(14)-d-glucopyranose terminal, 2,6-di-O-acetyl--(14)-d-glucopyranose, and 3,6-di-O-acetyl--(14)-d-glucopyranose. Using esterase from Viscozyme, it has been possible to hydrolyze up to 7% of the DS 3.0 starch. An -amylase (Fungamyl 800) was then added to these acetylesterases. With a 2.4 FAU/mL fraction of -amylase and 2.4 U/mL from the Viscozyme's acetylesterase, 28% of the acetylated end groups were hydrolyzed for the starch substrates with DS 3.0. Moreover, a synergic action between -amylase and acetylesterase was noticed, allowing fragmentation of 32% for DS 1.5, 30% for DS 1.9, and 11% for DS 3.0.     

Synthesis and environmental degradation of polyesters based on poly (ε-caprolactone)

Poly (-caprolactone) (PCL), poly (-valerolactone) (PVL), poly (-caprolactone-co--valerolactone) [P(CL-co-VL)], and poly (-caprolactone-co-ethylene oxide-co--caprolactone) (PCL-PEO-PCL) were synthesized by ring-opening and diol-initiated polymerization of -caprolactone and -valerolactone. The degradation of the samples by chemical hydrolysis and in a soil burial test was evaluated. It was found that PCL, PVL, and P(CL-co-VL) degrade mainly enzymatically. The rate of degradation depends on their molecular weight, chemical structure, composition, and morphology. PCL-PEO-PCL block copolymers exhibit a repelling effect to the microorganisms in the soil, which depends on the molecular weight and relative amount of PEO block in the copolymer.     

Mercury and Organochlorine Contamination in Brown Trout (Salmo Trutta) and Arctic Charr (Salvelinus Alpinus) from High Mountain Lakes in Europe and the Svalbard Archipelago

High concentration of Hg, less volatile PCB congeners and p,p-DDE in Arctic charr from an arctic lake was mainly causedby biomagnification in the food chain where cannibalism was thedriving force. We suggest that low sediment fluxes of Hg, low net production of methyl mercury, and short food chains excludingpiscivory explain the low levels of Hg in the invertebrate feeding fish population in five European high mountain lakes.Concentrations of less volatile PCB congeners in insectivorous fish populations from the European high mountain lakes were mainly influenced by fish age and atmospheric deposition, indicated by the sediment inventory. Atmospheric deposition influenced by local sources may explain the higher concentrationsof pesticides (p,p-DDT, p,p-DDE and -HCH) observedin fish from the Pyrenees compared to the other sites. Theconcentrations of Hg and organochlorines did not exceedthe guidelines for fish consumption, except for Hg levelsin the oldest fish from the arctic lake.     

Catalytic decomposition of hydrocarbon into hydrogen and carbon in a spouted-bed reactor as the second-stage reactor of a plastic recycling process

A two-stage process for the chemical recycling of plastics is proposed. In this process, which consists of two reactors, plastics are converted into hydrogen and carbon. In the first reactor, plastic chips are thermally decomposed into hydrocarbons. In the second reactor, the hydrocarbons formed in the first reactor are catalytically decomposed into carbon and hydrogen. In this study, in order to obtain basic data for the second reactor, propene was catalytically decomposed in a laboratory-scale spouted-bed reactor (600mm high, 21.6mm internal diameter, made of SUS304). The effect of the type of spouting medium used on the decomposition behavior of propene was investigated using four types of spouting medium (nickel-plated -alumina, palladium-plated -alumina, nickel-impregnated -alumina, and -alumina). The nickel-impregnated -alumina gave the best propene conversion and hydrogen yield.     

A carbon-13 method for evaluating degradation of starch-based polymers

A new method for evaluating biodegradability of starch-based and certain other polymer blends uses the pre- and postexposure stable carbon isotope composition of material coupled with weight loss data to determine which components have degraded. The naturally occurring stable isotope of carbon.¹³C, is enriched in corn starch (¹³C, approx. –11) compared to petroleum-derived synthetic polymers (¹³C, approx. –32). Results on starch-synthetic polymer blends indicate that the ¹³C signatures of these blends are near-linear mixtures of their component ¹³C. Values of a ¹³C for starch-synthetic polymer blends exposed to biologically active laboratory soil and artificial seawater conditions are depleted in¹³C compared to unexposed samples, suggesting loss of the starch component. Combined with weight loss data for the exposed samples, the ¹³C values are statistically consistent with models requiring loss of the soluble component glycerin, followed by loss of starch, then petrochemical polymer, or simultaneous loss of starch and petrochemical polymer. Replicate ¹³C analyses of starch-synthetic polymer blends increase the statistical power of this relatively inexpensive, accessible technique to discriminate between degrading components.     

Graft Copolymers, for Erodible Resins, from α-Hydroxyacids Oligomers Macromonomers and Acrylic Monomers

Environmental concerns result in a progressive withdrawal of antifouling paints containing organotin derivatives. The nature of the binders is critical with regard to the erosion of the protecting film through factors such as bond cleavage, dissolution, and diffusion of the degradation products. The versatility of acrylic polymers, due to the possibility of varying their chemical structure had conducted, in the first stage, to combine different types of repeating units in the macromolecular backbone. Formulation and evaluation, in natural sites, of these binders, with a well-defined hydrophobic/hydrophilic balance and with hydrolyzable pendant groups, have shown the possibility to prepare new organotin free resins which can be formulated and which are erodible in seawater over a long period (more than 2 years). A further step has been engaged with the development of graft copolymers containing biocompatible and hydrolyzable oligomers of -hydroxyacids. Their preparation requires the synthesis of -methacryloyloxyoligo--hydroxyacid macromonomers. Copolymers prepared from a mixture of the macromonomer and of an alkyl ester of acrylic acid were formulated with a biocide and deposited on a plate. Their ability to release cuprous oxide, as a model molecule, has been checked and quantified by the inductively coupled plasma analytical method. The uptake of water in the paint, which is enhanced by the hydrolysis of -hydroxyacid oligomers, as determined by the enzymatic measurement of liberated L-lactic acid, conducts to the polymer erosion and to a protecting bioactive surface.     

Gas and Aerosol Loadings at Holme Moss 1996–1998 Measurements and Analysis Using Back-Trajectory Clustering

A continuous two-year atmospheric datasetcomprising gas and aerosol loadings from amountain site in northern England (Holme Moss,W1°5130 N53°320) is presented. The data are analysed with respect to three-dayback-trajectories that are grouped according to aclustering technique that allows speed, directionand curvature of the airmass track to beconsidered. The technique is successful inseparating the data into chemically distinctsubsets. Up to 29% of the variance in the datais explained by back-trajectory clusters. Slow trajectories are associated with highloadings especially for the oxides of nitrogen,which may imply a local source for much of thesuspended pollutant. The data suggest thatproduction of nitrate and sulphate is limited byoxidant availability at least in the winter. Itmay be possible to optimise the analytical powerof the technique by increasing the importance ofrecent airmass track in determining clusterallocation. This applies especially to the totalsulphur loading.     

Investigation of the Aerobic Biodegradability of Several Types of Cyclodextrins in a Laboratory-Controlled Composting Test

The biodegradation of several types of cyclodextrins (CDs) under laboratory-controlled composting conditions was investigated. CDs are used in a broad range of applications in food, pharmaceutical, medical, chemical, and textile industries because of their specific chemical characteristics related to their hydrophobic interior and hydrophilic exterior. The three naturally occurring cyclodextrins -CD, -CD, and -CD proved to be completely and readily biodegradable. Chemical modification of these basic compounds can have a major impact on the biodegradation rate and final biodegradation percentage. Fully acetylated -CD and -CD were found to be nonbiodegradable during 45 days of composting. Reducing the degree of acetylation had a positive effect on the biodegradation. Complete biodegradation was obtained for partially acetylated -CD with a degree of substitution (DS) of 7. The methylation (DS = 13) of -CD resulted in an undegradable compound during the 47 days composting, while (2-hydroxy)propyl--CD reached a plateau in biodegradation at a percentage of 20%. The incorporation of the antimicrobial agents imazalil and allyl-isothiocyanate into -CD had no negative impact on biodegradation, which makes these antimicrobial agents/CD complexes suitable for incorporation into biodegradable active packaging.     

Assessment of Bacterial Degradation of Aromatic Hydrocarbons in the Environment by Analysis of Stable Carbon Isotope Fractionation

¹³C/¹²C stable carbon isotope fractionation was used to assess biodegradation in contaminated aquifers with toluene as a model compound. Different strains of anaerobic bacteria (Thauera aromatica, Geobacter metallireducens, and the sulfate-reducing strain TRM1) showed consistent ¹³C/¹²C carbon isotope fractionation with fractionation factors between C = 1.0017 and 1.0018. In contrast, three cultures of aerobic organisms, using different mono- and dioxygenase enzyme systems to initiate toluene degradation, showed variable isotope fractionation factors of C = 1.0027 (Pseudomonasputida strain mt-2), C = 1.0011 (Ralstonia picketii), andC = 1.0004 (Pseudomonas putida strain F1). The great variability of isotope fractionation between different aerobic bacterial strains suggests that interpretation of isotope data in oxic habitats can only be qualitative. A soil column was run as a model system for contaminated aquifers with toluene as the carbon source and sulfate as the electron acceptor and samples were taken at different ports along the column. Microbial toluene degradation was calculated based on the ¹³C/¹²C isotope fractionation factors of the batch culture experiments together with the observed ¹³C/¹²C isotope shifts of the residual toluene fractions. The calculated percentage of biodegradation, B, correlated well with the decreasing toluene concentrations at the sampling ports and indicated the increasing extent of biodegradation along the column. The theoretical toluene concentrations as calculated based on the isotope values matched the measured concentrations at the different sampling ports indicating that the Rayleigh equation can be used to calculate biodegradation in quasi closed systems based on measured isotope shifts. A similar attempt was performed to assess toluene degradation in a contaminated, anoxic aquifer. A transect of groundwater wells was monitored along the main direction of the groundwater flow and revealed decreasing concentrations accompanied with an increase in the ¹³C/¹²C stable carbon isotope ratio of the residual toluene. Calculation of the extent of biodegradation based on the isotope values and laboratory derived isotope fractionation factors showed that the residual toluene was degraded to more than 99% by microbial activity. Calculation of the theoretical residual toluene concentrations based on the measured isotope values described the strongly decreasing concentrations along the plume. Other aromatic hydrocarbons like benzene and naphthalene which were analysed in the same course also showed decreasing concentrations along the groundwater flow path accompanied by increasing ¹³C values indicating biodegradation.     

Remediation of Persistent Organic Pollutants Using a Novel Two-Phase Soil Washing Biosorption Process

A two-phase soil washing biosorption process was developed for the remediation of p,p-DDT-contaminated soil. The process involved desorption of contaminants from soil using dilute primary alcohols (40% 1-propanol) followed by contaminant removal from cosolvent solutions using fungal biosorption. Bench scale remediation studies were preformed to simulate ex situ (recycling experiment) or in situ (soil column study) treatment strategies. Both systems were effective at cleaning the soil to below Australian regulatory p,p-DDT levels. After 50–80 hours of soil washing, over 93% of p,p-DDT was removed from the soil(990 mg kg^-1 to <65 mg kg^-1) using either of these methods.p,p-DDT was removed from the cosolvent phase by sorption onto the fungal biomass. This resulted in only low levels of p,p-DDT remaining in the cosolvent solution(<1.5 mg l^-1). The application of both treatment strategies resulted in the rapid clean up of p,p-DDT-contaminated soil and the potential to recycle cosolvent solutions. The ability to recycle cosolvent solutions provides a mechanism for cost reductions of the remediation strategy.     

Enzymatic degradation of poly([R,S] β-hydroxybutyrate)

The synthetic analogue of a bacterially produced polyester, poly(-hydroxybutyrate) (PHB) was synthesized from racemic -butyrolactone using anin situ trimethyl aluminum-water catalyst. The polymer was fractionated into samples differing in molecular weight and isotactic diad content. The latter was closely related to degree of crystallinity. The biodegradation of these fractions were examined by monitoring mass loss over time in the presence of anAlcaligenes faecalis T1 extracellular bacterial poly(-hydroxybutyrate) depolymerase. The fraction with high isotactic diad tacticity content showed little or no degradation over a 50 hour incubation period, whereas the fraction of intermediate isotactic diad content degraded in a continuous steady fashion at a rate that was less than that for bacterial PHB. The low isotactic diad fraction underwent a rapid initial degradation, followed by no further mass loss. The presence of stereoblocks in the polymer structure of the various fractions was an influence on the degree of susceptibility towards degradation and is related to sample crystallinity.     

Correlating the Spatial Distribution of Atmospheric Ammonia with δ15N Values at an Ammonia Release Site

A field ammonia (NH₃) release experiment and open top chambers containing moorland monoliths continuously fumigated with NH₃ or sprayed with NH₄Cl were used to assess the potential for using ¹⁵N values in determining the area of influence around a point NH₃ emission source. ¹⁵N values are being increasingly used as environmental tracers and we tested the hypothesis that the ¹⁵N signal from an NH₃ emission source is observable in nearby vegetation. Using modified monitoring devices, atmospheric NH₃ concentrations were found to decrease with distance from source, with ¹⁵N values also reflecting this trend, producing a signal shift with changing concentration. Open top chamber studies of ¹⁵N values of Calluna vulgaris (L.) Hull indicated a correlation with deposition treatments in current year shoots. Analysis of Calluna shoots from the NH₃ release showed a similar trend of ¹⁵N enrichment. Significant linear correlations between ¹⁵N and percent N in plant material were found, both in the controlled conditions of the open top chambers and at the NH₃ release site, illustrating the possible use of this technique in N deposition biomonitoring.     

The Application of Stable Isotopes for Assessing the Hydrological, Sulfur, and Iron Balances of Acidic Mining Lake ML 111 (Lusatia, Germany) as a Basis for Biotechnological Remediation

Stable isotope (¹⁸O–H₂O, ²H–H₂O ³⁴S–SO₄ ^2-) andhydrochemical data (SO₄ ^2-, Fe-concentrations) have beenused to estimate the annual groundwater inflow and outflow of mining lake ML 111 and to calculate the total amount of dissolvedsulfate and iron that is carried into the lake by groundwater. The hydrological balance suggests an annual groundwater inflow of 23 700 m³ and an annual groundwater outflow of 15 700 m³. The calculation of the sulfur and iron balances yielded an annual sulfate input of 37 800 kg and an annual iron input of 7000 kg with the groundwater inflow. Furthermore it was shown that significant fluxes of these elements go into the lake sediments which results in continuous release of acidity in the lake water.     

Radiation Effects on Blends of Poly(ε-Caprolactone) and Diatomites

Poly(-caprolactone) (PCL) was blended with diatomaceous earth (diatomite) and irradiated with -rays to introduce cross-linking between PCL molecules or both components. The unwashed diatomite containing a little of a volatile component showed high efficiency of introduction of cross-linking, whereas that with no volatile component showed low efficiency of introduction of cross-linking. Elongational viscosity, melt viscosity, and modulus of PCL/diatomite blend irradiated at various doses were significantly improved. Enzymatic degradation of the PCL/diatomite blend became faster than that of the PCL, though that of the blend irradiated became slower.     

The degradation of gel-spun poly(β-hydroxybutyrate) “wool”

The apparent biodegradability and biocompatibility of the microbially produced polyester, poly(-hydroxybutyrate) (PHB), has been the focus of much research by a number of authors with regard to its potential for use in packaging and medical implantation devices. PHB has recently been produced by gel-spinning into a novel form, with one possible application being as a wound scaffolding device, designed to support and protect a wound against further damage while promoting healing by encouraging cellular growth on and within the device from the wound surface. This new nonwoven form combines a large volume with a low mass, has an appearance similar to that of cotton wool, and has been called wool because of this similarity. The hydrolytic degradation of this wool was investigated in an accelerated model of pH 10.6 and temperature 70°C. It was determined that the PHB wool gradually collapsed during degradation. The surface area-to-volume ratio was concluded to be a primary influencing factor. Degradation was characterized by a reduction in the glass transition temperatures and melting points and a fusion enthalpy peak of maximum crystallinity, (88%), which coincided with the point of matrix collapse.     

The Effect of Nitrogen Enrichment on the Carbon Sink in Coniferous Forests: Uncertainty and Sensitivity Analyses of Three Ecosystem Models

Estimates of the global carbon sink induced by nitrogen enrichment range vary widely, from nearly zero to 2.3 Gt C year^-1. It is necessary to reduce this uncertainty if we are to make accurate predictions of the future magnitude of the terrestrial carbon sink. Here, we present a Monte Carlo approach to uncertainty and sensitivity analysis of three ecosystem models, Century,BGCand Hybrid. These models were applied to a coniferous forest ecosystem in Sweden. The best estimate of the change in total carbon content of the ecosystem with the cumulative change in nitrogen deposition over 100 years, C_total/N_deposition was 20.1 kg C (kg N)^-1 using the pooled mean, with a pooled standard deviation of 13.8 kg C (kg N)^-1. Variability in parameters accounted for 92% of the total uncertainty in C_total/N_deposition, and only 8% was attributable to differences between models. The most sensitive parameters were those which controlled the allocation of assimilate between leaves, roots and stem. In particular, an increase in allocation to fine roots led to a large reduction in C_total/N_deposition in all models, because the fine roots have a very high turnover rate, and extra carbon allocated there is soon lost through mortality and decomposition.     

What substances or objects should be recycled? The recycling legislative experience in Taiwan

The legislative framework of waste management in Taiwan has never been efficient, mainly due to unclear definitions and regulations. In 2002, this system was split into two parts by enacting a new law, the Resource Recycling and Re-use Act (RRRA). However, it then became more complicated and recycling effectiveness was impeded. The causes were mainly the unclear definitions, conflicts about the scope, and issues between the RRRA and the Waste Disposal Act (WDA). This article examines the recycling legislation experience in Taiwan, and proposes two modifications for resolving these problems. The first proposal is merging these two acts into one. The second proposed modification maintains a two-system structure but introduces a new subject, discards, into the law. The subject of discards is further categorized as recyclable resources or waste, which correspond to recycling operations and disposal operations, respectively. The new structures, interfaces, prerequisites, properties, and comparisons are also explained.     

Preparation conditions and swelling equilibria of biodegradable hydrogels prepared from microbial poly(γ-glutamic acid) and poly(ε-lysine)

Biodegradable hydrogels prepared by -irradiation from microbial poly(amino acid)s are reviewed. pH-sensitive hydrogels were prepared by means of -irradiation of poly(-glutamic acid) (PGA) produced byBacillus subtilis IFO3335 and poly(-lysine) (PL) produced byStreptomyces albulus in aqueous solutions. The preparation conditions, swelling equilibria, hydrolytic degradation, and enzymatic degradation of these hydrogels were studied. A hydrogel with a wide variety of swelling behaviors has been produced by -irradiation from a mixture solution of PGA and PL.Paper presented at the 4th International Workshop on Biodegradable Plastics and Polymers, October 11–14, 1995, Durham, New Hampshire, USA.     

Degradation Kinetics of Biodegradable Fiber Composites

In a composite, fast degradable fibers determine the degradation of the slowly degradable matrix. Such biodegradable composites consisting of degummed hemp fibers and a polyester amide matrix were produced with fiber mass fractions between 0 and 0.48. The hot-pressed plates, 1-mm thick, were incubated in a standard soil. The degradation kinetics was quantified by the measurement of CO₂ production. Furthermore, after termination of experiment, the carbon balance was uncovered. The results were fitted to an exponential law taking into account the degradation of fibers. The increased amount of pores realized by high fiber contents induces pronounced degradation. The degradation is fully characterized by the time constant , which is correlated to the fiber mass fraction. The model allows to predict the degradation kinetics of composites with a few well-defined experiments.     

Biodegradability of Thermally Aged PHB,PHB-V,and PCL in Soil Compostage

The biodegradability of poly--hydroxybutyrate (PHB), poly--hydroxybutyrate-co-valerate (PHB-V) and poly--caprolactone (PCL) were examined following thermal aging in an oven for 192, 425 and 600 h. Different temperatures, 100, 120 and 140°C for PHB and PHB-V and 30, 40 and 50^oC for PCL were used to assess the influence of this parameter on biodegradation. The biodegradability tests were done in soil compostage at pH 11.0 and involved measuring the residual mass of polymer. Thermal analysis of the polymers was done using a differential scanning calorimeter (DSC). The melting temperature and crystallinity were also determined. Thermal ageing increased the biodegradability only for PHB at 120 and 140^oC, and there was no correlation between crystallinity and the biodegradation of the polymers.