Preliminary assessment of cement kiln dust in solidification and stabilization of mercury containing waste from a chlor-alkali unit

Journal of Material Cycles and Waste Management - A low-level mercury containing hazardous waste with a mercury concentration of 22.0 ± 5.00 ppm generated at a...     

Physicochemical and nutritional features of Gleditsia japonica shell biochar under different pyrolysis conditions

Journal of Material Cycles and Waste Management - This study aimed to investigate the effects of pyrolysis temperature (200–700 °C) and duration (2 h, 4 h) on...     

A grey-relation-based method (GRM) for thermogravimetric (TG) data analysis

Journal of Material Cycles and Waste Management - Thermogravimetric analyzer was applied to analyze 22 solid materials and their mixtures at a heating rate of 10 K min−1...     

Melting characteristics during the vitrification of MSW incinerator fly ash by swirling melting treatment

Journal of Material Cycles and Waste Management - Pilot tests of fly ash were investigated in a 0.2 MW swirling melting furnace at 1250–1400 °C. The properties of raw...     

Pyrolysis of lemon peel waste in a fixed-bed reactor and characterization of innovative pyrolytic products

Journal of Material Cycles and Waste Management - Lemon peel waste (LPW) were pyrolysed in a laboratory fixed-bed reactor at final temperature of 300 °C, 400 °C and...     

Microplastics for Use in Environmental Research

Journal of Polymers and the Environment - Microplastics?<?20 μm are being increasingly reported in treated drinking water as well as in surface waters. As such,...     

Nature and extent of unauthorized waste dump sites in and around Bangalore city

Journal of Material Cycles and Waste Management - Bangalore city generates around 3600 tons/day of solid waste and a major constituent is organic (>70 %). The quantum of wastes...     

Leaching characteristics of the fine fraction from an excavated landfill: physico-chemical characterization

Journal of Material Cycles and Waste Management - Leaching of fine fraction (<10 mm) obtained from landfill mining activities in an Estonian landfill was done. On-site excavation...     

Estimation of building-related construction and demolition waste in Shanghai

One methodology is proposed to estimate the quantification and composition of building-related construction and demolition (C&D) waste in a fast developing region like Shanghai, PR China. The varieties of structure types and building waste intensities due to the requirement of progressive building design and structure codes in different decades are considered in this regional C&D waste estimation study. It is concluded that approximately 13.71 million tons of C&D waste was generated in 2012 in Shanghai, of which more than 80% of this C&D waste was concrete, bricks and blocks. Analysis from this study can be applied to facilitate C&D waste governors and researchers the duty of formulating precise policies and specifications. As a matter of fact, at least a half of the enormous amount of C&D waste could be recycled if implementing proper recycling technologies and measures. The appropriate managements would be economically and environmentally beneficial to Shanghai where the per capita per year output of C&D waste has been as high as 842 kg in 2010.     

Estimating construction and demolition debris generation using a materials flow analysis approach

The magnitude and composition of a region’s construction and demolition (C&D) debris should be understood when developing rules, policies and strategies for managing this segment of the solid waste stream. In the US, several national estimates have been conducted using a weight-per-construction-area approximation; national estimates using alternative procedures such as those used for other segments of the solid waste stream have not been reported for C&D debris. This paper presents an evaluation of a materials flow analysis (MFA) approach for estimating C&D debris generation and composition for a large region (the US). The consumption of construction materials in the US and typical waste factors used for construction materials purchasing were used to estimate the mass of solid waste generated as a result of construction activities. Debris from demolition activities was predicted from various historical construction materials consumption data and estimates of average service lives of the materials. The MFA approach estimated that approximately 610–780 × 10⁶ Mg of C&D debris was generated in 2002. This predicted mass exceeds previous estimates using other C&D debris predictive methodologies and reflects the large waste stream that exists.     

Evaluating the effect of vehicle impoundment policy on illegal construction and demolition waste dumping: Israel as a case study

Construction and demolition (C&D) waste dumped alongside roads and in open areas is a major source of soil and underground water pollution. Since 2006, Israeli ministry for environmental protection enacted a policy of vehicle impoundment (VI) according to which track drivers caught while dumping C&D waste illegally have their vehicles impounded. The present study attempted to determine whether the VI policy was effective in increasing the waste hauling to authorized landfill sites, thus limiting the number of illegal unloads of C&D waste at unauthorized landfill sites and in open areas. During the study, changes in the ratio between the monthly amount of C&D waste brought to authorized landfills sites and the estimated total amount of C&D waste generated in different administrative districts of Israel were examined, before and after the enactment of the 2006 VI policy. Short questionnaires were also distributed among local track drivers in order to determine the degree of awareness about the policy in question and estimate its deterrence effects. According to the study’s results, in the district of Haifa, in which the VI policy was stringently enacted, the ratio between C&D waste, dumped in authorized landfill sites, and the total amount of generated C&D waste, increased, on the average, from 20% in January 2004 to 35% in October 2009, with the effect attributed to the number of vehicle impoundments being highly statistically significant (t = 2.324; p < 0.05). By contrast, in the Jerusalem and Southern districts, in which the VI policy was less stringently enforced, the effect of VI on the above ratio was found to be insignificant (p > 0.1). The analysis of the questionnaires, distributed among the local truck drivers further indicated that the changes observed in the district of Haifa are not coincident and appeared to be linked to the VI policy’s enactment. In particular, 62% of the truck drivers, participated in the survey, were aware of the policy and 47% of them personally knew a driver whose vehicle was impounded. Furthermore, the drivers estimated the relative risk of being caught for unloading C&D waste in unauthorized sites, on the average, as high as 67%, which is likely to become a deterrent on its own. Our conclusion is that the VI policy appears to have a deterring effect on truck drivers, by encouraging them to haul C&D waste to authorized landfill sites. As we suggest, the research methodology implemented in the study and its results may help policy makers in other regions and countries, which experience similar environment enforcement problem, to analyze policy responses.     

A Novel Green Process for Synthesis of 3-Hydroxyalkanoate Methyl Ester Using Lipase and Novel mcl-co-lcl PHA as Catalyst and Substrate

Journal of Polymers and the Environment - A new type of medium-chain-length-co-long-chain-length polyhydroxyalkanoate (mcl-co-lcl PHA) containing 39.25&nbsp;mol% 3-hydroxyhexadecanoic (3HHD)...     

An Environmentally Friendly Process for Textile Wastewater Treatment with a Medium-Chain-Length Polyhydroxyalkanoate Film

Journal of Polymers and the Environment - In this study, a novel medium-chain-length polyhydroxyalkanoate (mcl-PHA) film containing 39.25&nbsp;mol% 3-hydroxyhexadecanoic acid...     

Extraction of keratin from keratinous wastes: current status and future directions

Journal of Material Cycles and Waste Management - This review aims to trace the developments of keratin extraction techniques over the last 70&nbsp;years and possibilities for future research....     

A study on consumer consciousness and behavior to the plastic bag ban in Kenya

Journal of Material Cycles and Waste Management - Single use plastics pose environmental and socioeconomic problems in our life and ecosystems. After a 14&nbsp;year attempt, Kenya successfully...     

A novel humidity regulating material hydrothermally synthetized from concrete waste

Journal of Material Cycles and Waste Management - To promote the recycling of construction wastes, a low temperature (≤ 200&nbsp;℃) hydrothermal technology for solidifying...     

Preparation of Magadiite-Sodium Alginate Drug Carrier Composite by Pickering-Emulsion-Templated-Encapsulation Method and Its Properties of Sustained Release Mechanism by Baker–Lonsdale and Korsmeyer–Peppas Model

Journal of Polymers and the Environment - In this study, the nanohybrid drug carrier were synthesized by Pickering&nbsp;emulsion-templated encapsulation (PETE) method to control the...     

Immobilization of Horseradish Peroxidase on Macroporous Glycidyl-Based Copolymers with Different Surface Characteristics for the Removal of Phenol

Journal of Polymers and the Environment - Novel macroporous copolymers of glycidyl methacrylate and ethylene glycol dimethacrylate&nbsp;with mean pore size diameters ranging from 150 to...     

A low-cost process for efficient hydrolysis of deoiled rice bran and ethanol production using an inhouse produced multi-enzyme preparation from Aspergillus niger P-19

Journal of Material Cycles and Waste Management - The study deals with the management of deoiled rice bran by converting it into ethanol using a&nbsp;multi-enzyme preparation produced in-house...     

Fabrication of a pH-Responsive Magnetic Nanocarrier Based on Carboxymethyl Cellulose-Aminated Graphene Oxide for Loading and In-Vitro Release of Curcumin

Journal of Polymers and the Environment - In this study, a pH-responsive magnetic drug delivery system was prepared by&nbsp;cross-linking of Cofe2O4/graphene oxide to carboxymethyl cellulose...