废水产氢产酸/同型产乙酸耦合产酸条件优化

为了更好地发挥产氢产酸/同型产乙酸耦合系统在废水厌氧发酵生产乙酸方面的优势,有必要寻找一种简单有效的方法以获得该系统产酸的优化条件.利用经过加热处理并活化的厌氧污泥作种泥,以模拟废水中的葡萄糖为底物,针对发酵时间、底物浓度、种泥浓度、初始pH进行4因素10水平均匀设计实验,得到了乙酸生产指标与产酸条件之间关系的回归方程;也得到了以高乙酸产量为主要目标导向同时兼顾高乙酸产率和高乙酸生产强度目标的优化条件;优化条件实验乙酸浓度比均匀设计中最高乙酸浓度提高20%左右.研究表明,将均匀设计应用于废水产氢产酸/同型产乙酸耦合产酸条件优化,可以避免盲目性,迅速获得满意结果.     

推流式曝气池的结构优化方法

本文运用最优化理论，对推式曝气池的结构优化设计作了探讨。通过对比分析，得出优化结果比一般方法节省投产２０％，而且随着曝气池规模的增大，节省增大。     

垃圾填埋场渗滤液的产生，控制处理

垃圾填埋场作为固体废弃物的一种最终处置方法在三废治理中起着重要的作用。但是垃圾填埋场产生的渗滤液会成为二次污染，本文就渗滤液的产生，控制以及处理进行了探讨。     

乌梁素海湿地鸟类栖息地生态服务功能评估探讨

本文通过收集近30年鸟类种类及种群数据变化的资料,分析乌粱素海不同鸟类栖息环境的栖息地服务功能,从而评估鸟梁素海湿地鸟类栖息地的综合生态服务功能。评估结果表明：乌梁素海湿地鸟类栖息地综合生态服务功能为不好。     

Classification and comparison of municipal solid waste based on thermochemical characteristics

Municipal solid waste (MSW) has been normally sorted into six categories, namely, food residue, wood waste, paper, textiles, plastics, and rubber. In each category, materials could be classified further into subgroups. Based on proximate and ultimate analysis and heating value, statistical methods such as analysis of variance (ANOVA) and cluster analysis were applied to analyze the characteristics of MSW in every subgroup and to try to distinguish their relative properties. The chemical characteristics analysis of MSW showed that polyethylene (PE), polypropylene (PP), and polystyrene (PS) had the highest volatile matter content, with almost no ash and fixed carbon, while polyethylene terephthalate (PET) had high carbon content but low hydrogen content. Bones and vegetables had the highest ash content, while nutshells and rubber had the highest fixed carbon content. Paper and starch food had the highest oxygen content, and wool and bones had the highest nitrogen and sulfur content. Polyvinyl chloride (PVC) had the highest chlorine content at about 55%. PE, PP, and PS had the highest heating value, followed by chemical products such as rubber and chemical fiber. Conversely, paper, vegetables and bones had the lowest heating value. The results of cluster analysis of MSW components showed that fruit peel, weeds, wood, bamboo, leaves and nutshells could be classified as the lignocellulose category; starch food, cotton, toilet paper, printing paper and cardboard could be classified as the glucose monomer category; wood and chemical fiber could be classified as the high nitrogen and sulfur category; and PE, PP, and PS could be cluster as the polyolefin category.

Implications: The yield of municipal solid waste (MSW) is constantly increasing and waste to energy (WTE) has been used extensively all over the world. During the processes of incineration, pyrolysis, or gasification, the impact of physical and chemical properties of MSW is of great significance. However, the traditional classification of MSW is too general to provide more detailed information in many investigations. It is necessary to perform the investigation of characteristics of combustible MSW to distinguish different categories of MSW and find out their subclassification.     

微波-混凝处理高炉煤气洗涤水的实验研究

本文探索了微波作为辅助手段处理高炉煤气洗涤水过程中,微波辐射功率、微波辐射时间、聚合氯化铝(PAC)加入量、磷酸加入量对高炉煤气洗涤废水处理效果的影响。结果表明,微波和PAC混凝联用处理高炉煤气洗涤废水具有作用时间短、聚沉能力强等特点,可以有效去除废水中悬浮物,降低硬度及浊度。     

城镇生活污水就近引浇防沙治沙工程林

城镇生活污水排入水体 ,严重影响水资源的使用价值。沙漠地区因缺水 ,造成许多地方造林失败。本文提出了将城镇生活污水就近引浇防沙治沙工程林的构想 ,并从经济和环境影响两个方面详细论述了该方案的比较优势     

二相厌氧-混凝法处理制浆造纸综合废水的工艺设计及调试

湖南某造纸厂采用二相厌氧 混凝法处理制浆造纸综合废水取得了显著效果 ,CODCr排放总量削减率达 80 % ,水体水质明显改善。本文介绍了该工程的工艺设计及调试。     

曝气强度对膜污染的影响

混合液浓度的高低及其粒度分布特性是影响膜生物反应器膜污染的重要因素。在一定污泥浓度下,主要考察了曝气强度对污泥絮体粒度分布的影响,以及不同粒度下的膜污染特性。试验结果表明,曝气强度提高,可以起到减缓污泥颗粒在膜表面的沉积作用,但高的错流流速产生的剪切效应使得污泥颗粒变得琐碎,导致细小胶体粒子和溶解性部分增多,增加了膜孔吸附和堵塞的机会,加剧了膜污染的进程。膜污染速率在曝气强度提高初期阶段迅速降低,接着又随曝气强度增加而缓慢升高,在污泥质量浓度为8 g/L的试验条件下,对应的最适曝气强度为84 m3/(m2.h)。     

水力停留时间对膜生物反应器复合工艺污水处理特性的影响

开发了厌氧-多级好氧/缺氧-膜生物反应器复合工艺,在不同水力停留时间(HRT)下,考察了系统对污染物去除效果及其膜污染的特性.结果表明,在试验选定的HRT范围内,系统对TN和TP的去除率随着HRT的降低而升高,当HRT为8.70、6.96、4.97 h时,系统对TN和TP的平均去除率分别为73.15%、79.76%、81.98%和67.79%、80.99%、92.16%.但是,较低HRT条件下膜通量较高,会加剧膜污染进程.解决这一问题的措施是增加膜组件个数,从而在不提高膜通量的情况下使系统保持较低的HRT,保证系统高效稳定的污染物去除效果.