Decay profile and metabolic pathways of quinalphos in water, soil and plants

The widespread occurrence of pesticide residues in different agricultural and food commodities has raised concern among the environmentalists and food chemists. In order to keep a proper track of these materials, studies on their decay profiles in the various segments of ecosystem under varying environmental conditions are needed. In view of this, the metabolites of quinalphos in water and soil under controlled conditions and in plants, namely tomato and radish in field conditions have been analysed and possible pathways suggested. In order to follow the decay of the pesticide, an HPLC procedure has been developed. Studies conducted in water at different temperatures, pH and organic content reveal that the persistence of the pesticide decreases with the increase in all the three variables. In the three different types of soils studied, the effect of pH is more or less apparent on a similar line. On an average a faster decay is observed in the case of plants than in water and soil. The decay profiles in all these cases follow first order kinetics. The metabolites were identified by GC-MS. The investigations reflect that degradation occurs through hydrolysis, S-oxidation, dealkylation and thiono-thiol rearrangement. The pathways seem to be complex and different metabolites were observed with the change in the matrix. Quinalphos oxon, O-ethyl-O-quinoxalin-2-yl phosphoric acid, 2-hydroxy quinoxaline and quinoxaline-2-thiol were observed in all the matrices. Results further indicate that the metabolites, 2-hydroxy quinoxaline and oxon, which are more toxic than parent compound, persist for a longer time.     

Bottom-up approach for the reaction of xenobiotics and their metabolites with model substances for natural organic matter by electrochemistry-mass spectrometry (EC-MS)

Risk assessment of xenobiotics requires a comprehensive understanding of their transformation in the environment. As most of the transformation processes usually involve a redox reaction or a hydrolysis as the first steps of the transformation, we applied an approach that uses an electrochemical cell to investigate model “redox” reactions in aqueous solutions for environmental processes. We investigated the degradation of a variety of xenobiotics from polar to nonpolar and analyzed their degradation products by on-line coupling of electrochemistry with mass spectrometry (EC-MS). Furthermore, we evaluated possible binding reactions with regard to the generation of non-extractable residues with some model substances (catechol, phthalic acid, γ-l-Glutamyl-l-cysteinyl-glycine (GSH) and l-histidine) deduced from a natural organic matter (NOM) structure model and identified possible binding-sites.Whereas typically investigations in soil/water-systems have been applied, we used to our knowledge for the first time a bottom-up approach, starting from the chemicals of interest and different model substances for natural organic matter to evaluate chemical binding mechanisms (or processes) in the EC-MS under redox conditions. Under oxidative conditions, bindings of the xenobiotics with catechol, GSH and histidine were found, but no reactions with the model compound phthalic acid were observed. In general, no chemical binding has yet been found under reductive conditions. In some cases (i.e. benzo[a]anthracene) the oxidation product only underwent a binding reaction, whereas the xenobiotic itself did not undergo any reactions.EC-MS is a promising fast and simple screening method to investigate the environmental behavior of xenobiotics and to evaluate the potential risks of newly synthesized substances.     

Investigations of the determination and transformations of diazinon and malathion under environmental conditions using gas chromatography coupled with a flame ionisation detector

Degradation of two model insecticides, diazinon and malathion, and their degradation products 2-isopropyl-6-methyl-4-pyrimidinol--IMP (diazinon hydrolysis product) and malaoxon (malathion oxidation product) was compared and studied in the environment. The pesticides and their metabolites were extracted from samples (water, soil, chicory) with ethyl acetate and subsequently the extracts were analyzed by GC/FID. It was shown that hydrolysis is the major process in the degradation of these pesticides in water. In fact, 95% of diazinon was degraded, and only 10% of malathion was oxidised. In soil 30% of diazinon exposed to the sunlight was decomposed by photolysis, whereas in soil left in the darkness no degradation products were observed. In soil left under environmental conditions, 90% of diazinon was degraded and 40% from its initial concentration was transformed into IMP. The concentrations of the pesticides after 21 days on chicory were under maximal allowable concentration, which is 0.5 ppm for malathion and for diazinon. The concentration of malaoxon was more than twice as high as the allowable value, which is for the sum of malathion and malaoxon 3 ppm.     

Aerobic and anaerobic abiotic oxidation of squalene in the presence of hydroperoxides

Abiotic oxidation of squalene in the presence of hydroperoxysterols was studied in seawater under aerobic and anaerobic conditions. This ubiquitous isoprenoid alkene is quickly degraded in the presence of oxygen and its oxidation results mainly in the production of tertiary alcohols and to a lesser extent of epoxides and secondary alcohols. Although the degradation of squalene logically slows down under anaerobic conditions, a significant oxidation affording similar products than in the case of aerobic degradation has been observed. These results show that hydroperoxysterols, which seem to be well preserved in Recent sediments, could contribute to the oxidation of unsaturated lipids (such as squalene) in sedimentary environments under oxic and anoxic conditions.     

Impact of reaction products from building materials and furnishings on indoor air quality—A review of recent advances in indoor chemistry

The variety of chemical substances present in modern building products, household products and furnishings provides potential for chemical reactions in the material (case 1), on the material surface (case 2) and in the gas phase (case 3). Such “indoor chemistry” is known as one of the main reasons for primary and secondary emissions. The conditions of production often cause unwanted side reactions and a number of new compounds can be found in finished products. Elevated temperatures are responsible for the degradation of cellulose, decomposition of non-heat-resistant additives and other thermally induced reactions like Diels–Alder synthesis. Heterogeneous chemistry takes place on the surface of materials. Well-known examples are the formation of aliphatic aldehydes from the oxidation of unsaturated fatty acids or the cleavage of photoinitiators under the influence of light. In case of composite flooring structures hydrolysis is one of the major pathways for the appearance of alcohols from esters. If different kinds of material are fixed together, emissions of new VOCs formed by inter-species reactions are possible. Other indoor air pollutants are formed by rearrangement of cleavage products or by metabolism. Compounds with –CC– bonds like terpenes, styrene, 4-phenylcyclohexene, etc. undergo gas phase reactions with O₃, NO_x, OH and other reactive gases. It has been shown that such products derived from indoor-related reactions may have a negative impact on indoor air quality due to their low odor threshold or health-related properties. Therefore, the understanding of primary and secondary emissions and the chemical processes behind is essential for the evaluation of indoor air quality. This publication gives an overview on the current state of research and new findings regarding primary and secondary emissions from building products and furnishings.     

Field and laboratory studies of the fate and enantiomeric enrichment of venlafaxine and O-desmethylvenlafaxine under aerobic and anaerobic conditions

The stereoselectivity of R,S-venlafaxine and its metabolites R,S-O-desmethylvenlafaxine, N-desmethylvenlafaxine, O,N-didesmethylvenlafaxine, N,N-didesmethylvenlafaxine and tridesmethylvenlafaxine was studied in three processes: (i) anaerobic and aerobic laboratory scale tests; (ii) six wastewater treatment plants (WWTPs) operating under different conditions; and (iii) a variety of wastewater treatments including conventional activated sludge, natural attenuation along a receiving river stream and storage in operational and seasonal reservoirs. In the laboratory and field studies, the degradation of the venlafaxine yielded O-desmethylvenalfaxine as the dominant metabolite under aerobic and anaerobic conditions. Venlafaxine was almost exclusively converted to O-desmethylvenlafaxine under anaerobic conditions, but only a fraction of the drug was transformed to O-desmethylvenlafaxine under aerobic conditions. Degradation of venlafaxine involved only small stereoisomeric selectivity. In contrast, the degradation of O-desmethylvenlafaxine yielded remarkable S to R enrichment under aerobic conditions but none under anaerobic conditions. Determination of venlafaxine and its metabolites in the WWTPs agreed well with the stereoselectivity observed in the laboratory studies. Our results suggest that the levels of the drug and its metabolites and the stereoisomeric enrichment of the metabolite and its parent drug can be used for source tracking and for discrimination between domestic and nondomestic wastewater pollution. This was indeed demonstrated in the investigations carried out at the Jerusalem WWTP.     

Bottom-up approach for the reaction of xenobiotics and their metabolites with model substances for natural organic matter by electrochemistry–mass spectrometry (EC–MS)

Risk assessment of xenobiotics requires a comprehensive understanding of their transformation in the environment. As most of the transformation processes usually involve a redox reaction or a hydrolysis as the first steps of the transformation, we applied an approach that uses an electrochemical cell to investigate model “redox” reactions in aqueous solutions for environmental processes. We investigated the degradation of a variety of xenobiotics from polar to nonpolar and analyzed their degradation products by on-line coupling of electrochemistry with mass spectrometry (EC–MS). Furthermore, we evaluated possible binding reactions with regard to the generation of non-extractable residues with some model substances (catechol, phthalic acid, γ-l-Glutamyl-l-cysteinyl-glycine (GSH) and l-histidine) deduced from a natural organic matter (NOM) structure model and identified possible binding-sites.Whereas typically investigations in soil/water-systems have been applied, we used to our knowledge for the first time a bottom-up approach, starting from the chemicals of interest and different model substances for natural organic matter to evaluate chemical binding mechanisms (or processes) in the EC–MS under redox conditions. Under oxidative conditions, bindings of the xenobiotics with catechol, GSH and histidine were found, but no reactions with the model compound phthalic acid were observed. In general, no chemical binding has yet been found under reductive conditions. In some cases (i.e. benzo[a]anthracene) the oxidation product only underwent a binding reaction, whereas the xenobiotic itself did not undergo any reactions.EC–MS is a promising fast and simple screening method to investigate the environmental behavior of xenobiotics and to evaluate the potential risks of newly synthesized substances.     

The role of ferrous ion in Fenton and photo-Fenton processes for the degradation of phenol

The efficiency of different Fenton-related oxidative processes such as Fenton, solar-Fenton and UV-Fenton were examined using phenol as a model compound in simulated and industrial wastewater. A batch study was conducted to optimize parameters like pH, hydrogen peroxide concentration and ferrous ion concentration governing the Fenton process. At optimum conditions, different Fenton-related processes were compared for the degradation of phenol. Increased degradation and mineralisation efficiency were observed in photo-Fenton processes as compared to conventional Fenton process. The maximum mineralising efficiency for phenol with Fenton, solar and UV-Fenton processes were 41%, 96% and 97% respectively. In Fenton process, carboxylic acids like acetic acid and oxalic acid were formed as end products during the degradation of phenol while in photo-Fenton processes, both these ions were identified during the early stages of phenol degradation and were oxidized almost completely at 120 min of the reaction time. In photo-Fenton processes (solar and UV light) complete degradation were observed with 0.4 mM of Fe2+ catalyst as compared to 0.8 mM of Fe2+ in conventional Fenton process. In Fenton and solar-Fenton processes, an iron reusability study was performed to minimize the amount of iron used in treatment process. The efficacy of Fenton and solar-Fenton processes was applied to effluent from phenol resin-manufacturing unit for the removal and mineralisation of phenol.     

Photoassisted and photocatalytic degradation of sulfur mustard using TiO2 nanoparticles and polyoxometalates

The decomposition of highly toxic chemical warfare agent, sulfur mustard (bis(2-chloroethyl) sulfide or HD), has been studied by homogeneous photolysis and heterogeneous photocatalytic degradation on titania nanoparticles. Direct photolysis degradation of HD with irradiation system was investigated. The photocatalytic degradation of HD was investigated in the presence of TiO₂ nanoparticles and polyoxometalates embedded in titania nanoparticles in liquid phase at room temperature (33?±?2 °C). Degradation products during the treatment were identified by gas chromatography–mass spectrometry. Whereas apparent first-order kinetics of ultraviolet (UV) photolysis were slow (0.0091 min^?1), the highest degradation rate is obtained in the presence of TiO₂ nanoparticles as nanophotocatalyst. Simultaneous photolysis and photocatalysis under the full UV radiation leads to HD complete destruction in 3 h. No degradation products observed in the presence of nanophotocatalyst without irradiation in 3 h. It was found that up to 90 % of agent was decomposed under of UV irradiation without TiO₂, in 6 h. The decontamination mechanisms are often quite complex and multiple mechanisms can be operable such as hydrolysis, oxidation, and elimination. By simultaneously carrying out photolysis and photocatalysis in hexane, we have succeeded in achieving faster HD decontamination after 90 min with low catalyst loading. TiO₂ nanoparticles proved to be a superior photocatalyst under UV irradiation for HD decontamination.     

Investigating the affinities and persistence of VX nerve agent in environmental matrices

Laboratory experiments were conducted to determine environmental variables that affect the affinities and persistence of the nerve agent O-ethyl S-(2-diisopropylaminoethyl) methylphosphonothiolate (VX) at dilute concentrations in environmental matrices. Quantitative analyses of VX and its degradation products were performed using LC-MS. Batch hydrolysis experiments demonstrated an increasing hydrolysis rate as pH increased, as shown in previous studies, but also indicated that dissolved aqueous constituents can cause significant differences in the absolute hydrolysis rate. Adsorption isotherms from batch aqueous experiments revealed that VX has a high affinity for hydrophobic organics, a moderate affinity for montmorillonite clay, and a very low affinity for an iron-oxyhydroxide soil mineral, goethite. The adsorption on goethite was increased with the presence of dissolved organic matter in solution. VX degraded rapidly when dried onto goethite, when specific adsorption was forced. No enhanced degradation occurred with goethite in small amounts of water. These results suggest that aqueous conditions have important controls on VX adsorption and degradation in the environment and a more mechanistic understanding of these controls is needed in order to enable accurate predictions of its long-term fate and persistence.     

Intermediate distributions and primary yields of phenolic products in nitrobenzene degradation by Fenton's reagent

Nitrobenzene thermal degradation was investigated using the Fenton reagent in different experimental conditions. Reaction products were analyzed by HPLC, GC-MS, LC-MS and IC. The products obtained at different nitrobenzene conversion degrees show that degradation mainly involves successive hydroxylation steps of the aromatic ring and its subsequent opening followed by oxidation of corresponding aliphatic compounds. Our results show as primary reaction products: 4-nitrophenol, 3-nitrophenol, 2-nitrophenol, phenol and 1,3-dinitrobenzene, indicating that both hydroxylation and nitration reactions are involved. The formation of phenolic products can be explained by postulating an initial step of HO() addition to nitrobenzene ring. The mechanisms of primary reaction pathways are discussed and a detailed kinetic analysis to obtain the true primary yields of phenolic products is proposed. The relative yields observed for nitrophenol isomers do not follow the expected orientation according to deactivating characteristics of the nitro group but significantly depend on Fe(+2), Fe(+3), H(2)O(2) and O(2) concentrations. The understanding of the effect of reaction conditions on the relative product distribution benefits the application of Fenton and Fenton-like systems to waste water treatment.     

Growth rate effects, responses of antioxidant enzymes and metabolic fate of the herbicide Propanil in the aquatic plant Lemna minor

Propanil (3,4-dichloropropionanilide) is a selective contact pesticide, recommended for post-emergence use in rice. This herbicide may end up in surface waters and present potential risk for aquatic vascular plants. Therefore, its toxicity was evaluated on Lemna minor L., an aquatic plant regularly used for toxicological studies, during time- and concentration-dependent exposure. Toxicity assessments were based on inhibition of growth of L. minor cultures after 24 days. The obtained results showed that the growth of Lemna was affected by the herbicide. The responses of the guaiacol peroxidase (G-POD) and glutathione S-transferase (GST) involved in the xenobiotic metabolism and antioxidative system were also investigated following Propanil exposure. Our results showed that Propanil has not induced enzymatic antioxidative defenses of L. minor. Both 3,4-dichloroaniline (3,4-DCA) and 3,4-dichloroacetanilide are the major metabolites in this plant. On the contrary, only 3,4-DCA was found in culture media after 4 days. Probably, the enzymatic hydrolysis by acyl acylamidase and the acetylation by acetyl-CoA are the major pathways for these transformation products, respectively. The results of this study showed that the selected aquatic plant has the potential to accumulate and metabolize rice herbicide, like Propanil. Based on these toxicity data this herbicide should impair the establishment of non-target aquatic plants.     

Photodegradation of organophosphorus insecticides - investigations of products and their toxicity using gas chromatography-mass spectrometry and AChE-thermal lens spectrometric bioassay

Four organophosphorus compounds: azinphos-methyl, chlorpyrifos, malathion and malaoxon in aqueous solution were degraded by using a 125 W xenon parabolic lamp. Gas chromatography-mass spectrometry (GC-MS) was used to monitor the disappearance of starting compounds and formation of degradation products as a function of time. AChE-thermal lens spectrometric bioassay was employed to assess the toxicity of photoproducts. The photodegradation kinetics can be described by a first-order degradation curve C=C0e(-kt), resulting in the following half lives: 2.5min for azinphos-methyl, 11.6 min for malathion, 13.3 min for chlorpyrifos and 45.5 min for malaoxon, under given experimental conditions. During the photoprocess several intermediates were identified by GC-MS suggesting the pathway of OP degradation. The oxidation of chlorpyrifos results in the formation of chlorpyrifos-oxon as the main identified photoproduct. In case of malathion and azinphos-methyl the corresponding oxon analogues were not detected. The formation of diethyl (dimethoxy-phosphoryl) succinate in traces was observed during photodegradation of malaoxon and malathion. Several other photoproducts including trimethyl phosphate esters, which are known to be AChE inhibitors and 1,2,3-benzotriazin-4(3H)-one as a member of triazine compounds were identified in photodegraded samples of malathion, malaoxon, and azinphos-methyl. Based on this, two main degradation pathways can be proposed, both result of the (P-S-C) bond cleavage taking place at the side of leaving group. The enhanced inhibition of AChE observed with the TLS bioassay during the initial 30 min of photodegradation in case of all four OPs, confirmed the formation of toxic intermediates. With the continuation of irradiation, the AChE inhibition decreased, indicating that the formed toxic compounds were further degraded to AChE non-inhibiting products. The presented results demonstrate the importance of toxicity monitoring during the degradation of OPs in processes of waste water remediation, before releasing it into the environment.     

Environmental VOSCs--formation and degradation of dimethyl sulfide, methanethiol and related materials

Volatile organic sulfur compounds (VOSCs) play a major role in the global sulfur cycle. Two components, dimethyl sulfide (DMS) and methanethiol (MT) are formed in large amounts by living systems (e.g. algae, bacteria, plants), particularly in marine environments. A major route to DMS is by action of a lyase enzyme on dimethylsulfoniopropionate (DMSP). DMSP has other roles, for instance as an osmoprotectant and cryoprotectant. Demethiolation of DMSP and other materials leads to MT. A major transport process is release of DMS from the oceans to the atmosphere. Oxidation of DMS in the atmosphere by hydroxyl and nitrate radicals produces many degradation products including CO2, COS, dimethyl sulfoxide, dimethyl sulfone, organic oxyacids of sulfur, and sulfate. These materials also have roles in biotic processes and there are complex metabolic interrelationships between some of them. This review emphasizes the chemical reactions of the organic sulfur cycle. For biotic reactions, details of relevant enzymes are provided when possible.     

Hydrolytic degradation of azimsulfuron, a sulfonylurea herbicide

The chemical degradation of the herbicide azimsulfuron was investigated in aqueous solutions at different pH values. The hydrolysis rate, determined by HPLC analyses, was pH dependent and was much faster in acidic than in neutral or weakly basic conditions. The metabolites formed at different pH values were compared with standards when possible or isolated and identified using ESI-LC-MS/MS, (1)H NMR and (13)C NMR. The two main products of hydrolysis in mild acidic solution were identified as 2-amino-4,6-dimethoxy-pyrimidine and 2-methyl-4-(2-methyl-2H-tetrazol-5-yl)-2H-pyrazole-3-sulfonamide, both produced as a result of the sulfonylurea bridge cleavage. Under basic conditions, a new product, a substituted 2-pyrimidinamine, deriving from the contraction of the sulfonylurea bridge, was isolated and completely characterized for the first time.     

Evaluation of photolysis and hydrolysis of pyraclostrobin in aqueous solutions and its degradation products in paddy water

This study evaluated the hydrolysis and photolysis kinetics of pyraclostrobin in an aqueous solution using ultra-high-performance liquid chromatography–photodiode array detection and identified the resulting metabolites of pyraclostrobin by hydrolysis and photolysis in paddy water using high-resolution mass spectrometry coupled with liquid chromatography. The effect of solution pH, metal ions and surfactants on the hydrolysis of pyraclostrobin was explored. The hydrolysis half-lives of pyraclostrobin were 23.1–115.5?days and were stable in buffer solution at pH 5.0. The degradation rate of pyraclostrobin in an aqueous solution under sunlight was slower than that under UV photolysis reaction. The half-lives of pyraclostrobin in a buffer solution at pH 5.0, 7.0, 9.0 and in paddy water were less than 12?h under the two light irradiation types. The metabolites of the two processes were identified and compared to further understand the mechanisms underlying hydrolysis and photolysis of pyraclostrobin in natural water. The extracted ions obtained from paddy water were automatically annotated by Compound Discoverer software with manual confirmation of their fragments. Two metabolites were detected and identified in the pyraclostrobin hydrolysis, whereas three metabolites were detected and identified in the photolysis in paddy water.     

Biodegradation potential of ofloxacin and its resulting transformation products during photolytic and photocatalytic treatment

The release of pharmaceuticals in the environment, as parent compounds, metabolites and transformation products, and the consequent risks posed to living organisms due to the unintended exposure of the latter to these chemicals are nowadays of increasing scientific concern. The development of advanced oxidation processes able to degrade these substances is in the core of the current research objectives, the main target being the removal of these compounds from wastewaters. Often the focus is on the removal of the parent compound only. However, these processes can form transformation products. Knowledge on the risk related to such transformation products is scarce. Among others, knowledge on their toxic effects and their biodegradability is of importance not only when they are present in the environment but also for the assessment of the advanced oxidation processes’ efficiency applied for their degradation. Photolytic (UV irradiation) and photocatalytic treatment (UV irradiation in the presence of TiO₂) of the fluoroquinolone ofloxacin were applied, and the biodegradability of the formed products was investigated using the Closed Bottle test (OECD 301 D). Various transformation products, formed both during the photo(cata)lytic treatment and the Closed Bottle test, were identified using chromatographic analysis with an ultra high-performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) system. The transformation products formed during the phototreatments were found to be non-readily biodegradable as the biodegradation percentages were close to zero. The persistence of the various photo(cata)lytic transformation products during the Closed Bottle test may be attributed to the fluorine present in all the transformation products formed. The transformation products identified suggest that two transformation routes were present: decarboxylation and opening of the piperazinyl ring. Interestingly, it was observed that in the presence of a readily biodegradable carbon source (sodium acetate), the biodegradation percentage increased drastically for some of the photolytically treated samples. This was not the case for the photocatalytically treated samples, in which also mineralization of the parent compound was achieved faster. Further research is needed, however, in order to increase the understanding of the conditions that may lead to less potent and persistent substances during the application of such engineered or natural processes.     

Cycling of volatile organic sulfur compounds in anaerobically digested biosolids and its implications for odors.

The objectives of this research were to elucidate the mechanisms for production and degradation of volatile organic sulfur compounds (VOSCs), key odor causing compounds produced by biosolids. These compounds included methanethiol (MT), dimethyl sulfide (DMS), and dimethyl disulfide (DMDS). A series of experiments were used to probe various pathways hypothesized to produce and degrade these VOSCs. The production of MT was found to mainly occur from degradation of methionine and the methylation of hydrogen sulfide. DMS was formed through the methylation of MT. DMDS was formed by MT oxidation. All three of the VOSCs were readily degraded by methanogens and a cyclic pathway was proposed to describe the production and degradation of VOSCs. The research demonstrated that the main source of VOSCs was the biodegradation of protein within the biosolids and the results provided a framework for understanding the production of odor from anaerobically digested sludges before and after dewatering.