Environmental prospection for PCDD/PCDF, PAH, PCB and heavy metals around the incinerator power plant of Reggio Emilia town (Northern Italy) and surrounding main roads

Samples of soil, sediment and pine needles from the Reggio Emilia area were analysed in order to estimate the environmental pollution caused by an MSWI. PCDD/PCDF, PCB, PAH and metals were analysed in the collected samples. The data obtained showed relatively low pollution levels. Indeed, the PCDD/PCDF and PCB data were comparable to the values usually found in the grazing areas of the European Union countries. Metal concentrations in soils and sediments may be related to local geological occurrences and to agricultural activities. PAH values are significantly lower than the limit values set by the Italian law.     

Analysis of dioxin-like compounds in vegetation and soil samples burned in Catalan forest fires. Comparison with the corresponding unburned material

Only a few data are reported about the formation of polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF) in forest fires. However, the inventories of sources undertaken by several European and American countries consider natural fires as a possible source of PCDD/F and, in some cases, as one of the most important. In our work we have analysed vegetation and soil samples burned in four forest fires which happened in Catalonia in the summer of 1998. The concentration of dioxin-like compounds (PCDD/F, non-ortho polychlorinated bi-phenyls (PCB) and mono-ortho PCB) has been compared to the concentration present in the corresponding unburned material collected in places near the fires but not affected. The results of this preliminary study show very low concentrations in all the samples, both burned and unburned. Although a change in the profile (proportional increase of tetrachlorinated congeners in PCDD/F) is observed in burned samples compared to unburned ones, the absolute values of concentration decrease in most samples. Therefore, natural fires seem not to be an important source of dioxin-like compounds. These results will be confirmed with air emissions measurements in future studies.     

Surface contamination with PASH, PAH and PCDD/F after fire accidents in private residences

Surface samples were taken from two private residences after real fire accidents. The goal was, to determine the surface contaminations with polycyclic aromatic sulfur heterocycles (PASH), as representatives of a substance class, not investigated in this context, by now, polycyclic aromatic hydrocarbons (PAH) and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F). Analytical method for the determination of PASH was developed for the respective matrix. Concentrations measured ranged between 1.70 and 465 micrograms/m2 for PASH, 34.3 and 58,800 micrograms/m2 for PAH (EPA), and 4.15 and 1,300 ng/m2 for PCDD/F, as well. Obviously, PASH were formed during the fire accidents. Nevertheless, PAH were the most relevant pollutants after these small fires.     

The historical record of PAH, PCB, trace metal and fly-ash particle deposition at a remote lake in north-west Scotland

Sediment cores taken from the deep basin of Loch Coire nan Arr in north-west Scotland were dated using 210Pb calibrated spheroidal carbonaceous particle (SCP) profiles and analysed for trace metals, polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). These data show that the site is one of the least contaminated by atmospheric pollution in the UK. Peak concentrations of PAHs were found to be equivalent to background values at sites in the English Lake District. The date of concentration maxima for SCP, PCB and some metals were in agreement with previously published polychlorinated dibenzo-p-dioxin/polychlorinated dibenzofuran (PCDD/F) data suggesting long-range industrial sources. The date of individual PAH concentration maxima were earlier, but concomitant with each other, possibly suggesting the influence of a local source. Comparison with remote European mountain lakes shows Loch Coire nan Arr to be one of the least contaminated sites in Europe with respect to PCBs, but more contaminated with respect to PAHs.     

Heavy metals, PCDD/F and PCB in sewage sludge samples from two wastewater treatment facilities in Rio de Janeiro State, Brazil

Two sewage sludge samples collected from an urban as well as a rural area in Brazil and one sludge sample originating from the city of Balingen, Baden-Württemberg, South Germany, were investigated in respect to contamination with heavy metals, PCDD/F and PCB. The results were compared to PCDD/F and indicator-PCB mean values found in the region of Baden-Württemberg. The observed toxicity equivalents of PCDD/F found in the Brazilian samples, were below the upper limit specified by German legislation for final disposal or agricultural use in soils. Both the PCB and heavy metal values exceeded this limit. The PCDD/F congener/homologue profiles found in the Brazilian samples indicated that the urban sewage sludge shows a contamination where both chlorophenols and depositional sources appear to be contributing to the contamination pool. The enrichment of highly chlorinated PCDD/F groups in the sludge of semi-rural origin is probably due to transport phenomena effects. For the German sludge sample, depositional sources seem to be the main PCDD/F contamination pathway. Regarding PCB, both Brazilian samples show a homologue profile that indicates a contamination stemming from technical PCB formulations like Clophen A50 and Clophen A60 or equivalent.     

Regional aspects and statistical characterisation of the load with semivolatile organic compounds at remote Austrian forest sites

Spruce needles and humus layer of 25 remote forest sites spread all over Austria were investigated for their concentrations of PCDD/F, PCB, HCH, HCB, PCP, DDX and PAH. Influences of the sites' location on the detected concentrations have been identified: The north of Austria was characterised by a comparably higher overall pollutant load. In addition, altitudinal aspects were addressed. Between several compounds significant positive correlations have been identified, which were more pronounced for compounds with a stronger causal relationship. Pattern analyses allowed to identify--even for the remote sites--differences between the relative PCDD/F, HCH, DDX and PAH patterns of the sites. Partly, these different patterns were related to significantly higher or lower corresponding absolute concentrations of the sites.     

The historical record of PCB and PCDD/F deposition at Greifensee, a lake of the Swiss plateau, between 1848 and 1999

Dated sediment cores provide an excellent way to investigate the historical input of persistent organic pollutants into the environment and to identify possible sources of pollution. The vertical distribution of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/F) and polychlorinated biphenyls (PCB) was investigated in a sediment core from Greifensee to elucidate the historical trends of PCDD/F and PCB inputs between 1848 and 1999. Concentrations of PCB and PCDD/F increased by more than one order of magnitude between 1930 and 1960. PCB and PCDD/F concentrations were 5700 ng/kg dry weight (dw) and 160 ng/kg dw, respectively, in sediments originating from the late 1930s and reached a maximum of 130,000 ng/kg dw and 2400 ng/kg dw, respectively, in the early 1960s. From 1960 on, concentrations decreased to the 1930s level by the mid 1980s. A remarkable shift in the PCDD/F pattern was observed after the early 1940s. Before 1940, the PCDD/F pattern was PCDF dominated (ratio of PCDD to PCDF=0.41+/-0.11), while the PCDD started to be the major species after the early 1940s (ratio of PCDD to PCDF=1.46+/-0.38). The temporal trends of PCB and PCDD/F correlate surprisingly well with each other. This might be due to the coincidence of two factors. The introduction of PCB on the market in the 1930s resulted in emissions due to the widespread use of these industrial chemicals. In the same time period, waste incineration became an increasingly popular way to get rid of garbage, boosting the PCDD/F emissions significantly. The rapid decline of PCDD/F and PCB concentrations in the sediment starting in the early 1960s reflects the result of better emission control techniques in thermal processes and the improvement of waste water treatment in the catchment of Greifensee.     

A comparison of Alpine emissions to forest soil and spruce needle loads for persistent organic pollutants (POPs)

The project MONARPOP analysed the concentrations of semivolatile organic compounds (SVOCs) in two important sink compartments, needles of Norway spruce (Picea abies [L.] Karst.) and forest soil from 40 remote Alpine forest sites in Austria, Germany, Italy, Slovenia and Switzerland.In the present study the load of PCDD/F, PCB, PBDE, PAH, HCB, HCH and DDT in the Alps calculated on the basis of measured data are compared with their estimated emissions in the Alpine region. It comes out that the masses of the studied pollutants stored in the forests are higher than the corresponding emissions in the Alpine area indicating that the Alps are a sink for POPs advected from surrounding areas. It is assumed that local emissions of PCDD/F and PAH deriving from biomass burning are probably underestimated and that the pool of these pollutants in the forests represents the accumulation over some decades.     

Correlation of PCDD/F and PCB concentrations in soil samples from the Swiss soil monitoring network (NABO) to specific parameters of the observation sites

Concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) and polychlorinated biphenyls (PCB) were determined in 23 soil samples collected at reference sites of the Swiss national soil monitoring network (NABO). Total PCDD/F and PCB concentrations are well correlated and proportional (R2=0.720). The total PCDD/F levels were between 72 and 703 ng/kg corresponding to 1.1-11 ng I-TEQ/kg, total PCB concentrations (sum of seven congeners IUPAC no. 28, 52, 101, 118, 138, 153, and 180) were from 1.1 to 12 microg/kg. In all samples, the PCDD/F and PCB concentrations were in the range of background levels for these contaminants in Central Europe. Ninteen samples revealed PCDD/F levels below the guide value of 5 ng I-TEQ/kg set by the Swiss ordinance relating to impacts on the soil (OIS); concentrations for the remaining four samples were below the trigger value (20 ng I-TEQ/kg). All PCB concentrations were below the guide value of 100 microg/kg. The elevated PCDD/F and PCB levels in some of the samples originating from forested sites could be attributed to the scavenging effect of forest canopies for semivolatile organic compounds. This interpretation could be substantiated by the observed distortion of the congener and homolog patterns of PCDD/F and PCB which is characteristic for forested sites.     

Comparative study of methodologies for the analysis of PCDDs and PDCFs in powdered full-fat milk. PCB, PCDD and PCDF levels in commercial samples from Spain

Feasibility of two different extraction methods involving solid-liquid extraction and Soxhlet extraction, previously used for the determination of lipid contents and PCB levels on powdered full-fat milk, are now examined for simultaneous PCDD/F analysis. The results of this study are consistent with those found for PCBs. The solid-liquid procedure provides the most efficient extraction of both labelled spiked and endogenous PCDD/Fs with the lowest variability. The average recoveries were 101% (R.S.D. = 6.9%) for 13C12-2,3,7,8-TCDD and 95% (R.S.D. = 11%) for 13C12-1,2,3,4,7,8-HxCDD. The R.S.D.s for endogenous 2,3,7,8-PCDD/Fs were in the 9.3-25% range. In addition, this methodology simplified the subsequent clean-up step as it allowed a semi-selective extraction of the apolar lipids from the milk. The proposed method was applied to simultaneous PCB and PCDD/F analyses in different brands of powdered full-fat milks commercially available in Spain. In all cases, very similar PCB and PCDD/F levels were found. Differences among batches from the same manufacturer were even lower. The total i-TEQ average for PCDDs and PCDFs in the 22 powdered full-fat milk samples analysed was 1.87 pg/g fat basis. This value was similar to those found in cow's milk from other European countries.     

Degradation of PCDD, PCDF, PAH, PCB and chlorinated phenols during the destruction-treatment of landfill seepage water in laboratory model reactor (UV, Ozone, and UV/Ozone)

Seepage water of toxic waste landfills is polluted with high concentrations of toxic organic compounds. The concentrations in the seepage water we applied for chlorinated phenols are between 2 μg/1 and 1 mg/l, for PCB between 800 pg/l and 250 ng/l, for PAH between 200 ng/l and 12 μg/l and for PCDD and PCDF between 20 pg/l and 1 ng/l. Usual purification methods produce highly contaminated residues, which have to be treated by pyrolysis or are deposited again at a landfill. A better way is to destruct these contaminants by UV/ozone treatment. The treatment of seepage water by UV-irradiation, ozone and UV/ozone is compared. Results show no significant effect during all treatments for PCB and PCDD/PCDF. The chlorinated phenols and PAH were mostly destroyed by UV/ozone treatment more than 90 %. The pH value has no influence on the UV/ozone treatment of seepage water.     

PCDD/F and dioxin-like PCB in Hong Kong air in relation to their regional transport in the Pearl River Delta region

PCDD/F and dioxin-like PCB were measured in 142 air samples of Hong Kong. The annual average PCDD/F and dioxin-like PCB concentrations obtained for Hong Kong air at Tap Mun (PCDD/F: 1724+/-1984; dioxin-like PCB: 1572+/-1170 fg m(-3)), Yuen Long (PCDD/F: 2927+/-2695; dioxin-like PCB: 4331+/-1962 fg m(-3)) and Tsuen Wan (PCDD/F: 1875+/-1502; dioxin-like PCB: 2972+/-1510 fg m(-3)) from January 2004 to March 2005 were comparable to other urban centers around the world and were within the Japanese and USA ambient air quality guidelines. A clear seasonal pattern was observed for PCDD/F, generally with a 50-60 times higher air concentration in winter when background northerly wind was weaker and land-sea breeze prevailed, resulting in regional transport; and a lower concentration in summer, due to the inflow of clean oceanic southeasterly wind from the South China Sea. A higher WHO-TEQ value of dioxin-like PCB (mainly attributed to the relatively higher WHO-TEQ value of PCB 126) in Yuen Long during winter, compared with other months, could also be related to the regional transport by the winter monsoon wind and the low mixing height in winter. Spatially, air concentrations of PCDD/F and dioxin-like PCB demonstrated a west-to-east gradient (with Yuen Long>Tsuen Wan>Tap Mun). It is suggested that PCDD/F and dioxin-like PCB were transported into the western airshed of Hong Kong from the Pearl River Delta by land-sea breeze circulation and confined to the northwestern part, due to the blocking effect of the northwestern airshed in Hong Kong.     

PCDD/F and PCB history in dated sediments of a rural lake

Concentrations of polychlorinated dibenzo-p-dioxins (PCDD), dibenzofurans (PCDF) and biphenyls (PCB) were analysed from a sediment core, which had been sampled from a remote lake in Finland. The deepest subsamples were analysed from a depth of 4.0 m, and were more than 8000 years old. At the surface of the sediment core, low levels of industrial background contamination were detected. The sum of 2,3,7,8-substituted PCDD/Fs was 35 ng/kg d.w. (dry weight), or 1.2 ng/kg d.w. in WHO's toxicity equivalent, WHO-TEQ. The annual accumulation rate of 2,3,7,8-substituted PCDD/Fs was 1.26 ng m(-2) a(-1). Deeper in the core, PCDD/F concentrations ranged between 2.11 and 11.1 ng/kg d.w. (0.24 and 1.70 ng/kg d.w. WHO-TEQ) and the accumulation rate was 0.11 ng m(-2) a(-1). A characteristic PCDD/F congener profile was found in all pre-industrial sediment layers. The order of concentrations was OCDD > 1,2,3,4,6,7,8-HpCDD > 1,2,3,7,8,9-HxCDD > 1,2,3,4,7,8-HxCDD > 2,3,7,8-TCDD, and concentrations of 2,3,7,8-chlorinated dibenzofurans were below the detection limit. Similar congener profiles have previously been described in samples for which natural PCDD/F formation has been proposed. PCBs were present at low levels in all of the sediment samples. The sum of the PCB concentrations of the sediment subsamples ranged between 50 and 2540 ng/kg d.w., and the three predominant congeners in the core were PCBs 18, 52, and 110.     

PCDD/F formation from oxy-PAH precursors in waste incinerator flyash

The yield of PCDD/F in relation to the presence of oxygenated PAH in model waste incinerator flyash has been investigated in a fixed bed laboratory scale reactor. Experiments were undertaken by thermal treatment of the model flyash at 250 and 350 °C under a simulated flue gas stream for 2 h. After reaction, the PCDD/F content of the reacted flyash and the PCDD/F released into the exhaust gas, and subsequently trapped by XAD-II resin in a down-stream condensation system were analyzed. The PAHs investigated were, dibenzofuran and benzo[b]naphtho[2,3-d]furan and were spiked onto the model flyash as reactant precursors for PCDD/F formation. The results showed significant formation of furans from both of the PAH investigated, however except from some highly chlorinated dioxin congeners, the formation of dioxins was not so common. Benzonaphthofuran was significantly more reactive than dibenzofuran in PCDD/F formation, in spite of the fact that dibenzofuran is structurally more similar to that of PCDD/F. Thus, there was no clear attribution between the chemical structure of PAH used and the formation of PCDD/F. There were considerable differences between the yields of PCDD/F congeners in the gaseous species and those in the reacted flyash under the same operational conditions. The concentration of PCDD/Fs was reduced at the higher reaction temperature of 350 °C; however, the higher temperature resulted in the majority of the PCDD/F formed on the flyash being released into the gas phase.     

Occurrence of PCDD/F, PCB, PBDE, PFAS, and organotin compounds in fish meal, fish oil and fish feed

We analysed polychlorinated dibenzo-p-dioxins and furans (PCDD/F, dioxins), and polychlorinated biphenyls (PCB) in 13 fish meal, five fish oil, and seven fish feed samples. Polybrominated diphenyl ethers (PBDE), organotin compounds (OTC), and perfluoroalkylated substances (PFAS) were analysed in ten fish meal, two fish oil, and two fish feed samples. All measured TEQ concentrations of PCDD/F and PCB were below the maximum levels set by Directive 2002/32/EC. There was no correlation between concentrations of WHOPCDD/F-TEQ and indicator PCB in our samples. The most common congeners among PBDEs were BDE-47 and BDE-100. BDE-209 was present in five fish meals of the ten analysed. Tributyltin (TBT) was the predominant congener in all samples except in three fish meals, where monobutyltin (MBT) was the major congener. Perfluorooctane sulphonate (PFOS) was the predominant congener in six fish meals of the ten analysed. There was large variation in concentrations and congener distributions of the studied compounds between our samples. Our results underline a need to pay special attention to the origin and purity of feed raw material of marine origin.     

PCDD/F and PCB multi-media ambient concentrations, congener patterns and occurrence in a Mediterranean coastal lagoon (Etang de Thau, France)

Ambient concentrations, congener patterns and multi-media distribution of PCDD/Fs and PCBs were determined in air, water, sediment and mussels in a semi-enclosed marine ecosystem (Thau lagoon, France). summation operator2,3,7,8-PCDD/F and summation operator7ICES PCB air concentrations (0.2-1.4 and 31-57pg m(-3), respectively) were typical of rural areas. Concentrations in the water column were very low for PCDD/Fs (163-476fg L(-1)) and low for PCBs (138-708pg L(-1)). PCDD/F and PCB concentrations found in surface sediment (0.15-1.6 and 2.5-33ng g(-1) d.w., respectively) and mussel (13-21pg g(-1) d.w. and 10-39ng g(-1) d.w., respectively) were medium levels. PCDD/F congener patterns observed in air, water particulate phase and sediments were similar suggesting direct coupling among these compartments and atmospheric inputs of PCDD/Fs into the lagoon. Conversely, for the same set of samples, similar patterns were not observed for PCBs in the mentioned compartments.     

Correlation between PCDD/F, PCB and PCBz in coal/waste combustion. Influence of various inhibitors

In the flue gas of co-combustion of solid waste and coal in a laboratory scale furnace high concentrations of polychlorinated dibenzo-p-dioxin and furans (PCDD/F), polychlorinated biphenyls (PCB) and polychlorinated benzenes (PCBz) have been detected. These toxic emissions have been reduced by the help of various inhibitors added to fuel before incineration. Knowledge of the congener pattern and homologue profiles of PCDD/F, PCB and PCBz is important to elaborate the mechanism of formation and inhibition of the toxic compounds formed during co-combustion of solid waste and coal. Principle component analysis (PCA) is used in order to find the similarity between the samples and separate them according their toxicity. By the help of the component analysis (CA) the best correlated congeners are effectively detected. Using linear regression between the independent variables and the indicator parameters various good correlated pairs between PCDD/F, PCB and PCBz have been elaborated. Generally it was found that the samples with higher toxicity show a good correlation between tetra- and pentachlorinated benzenes and tetra- and pentachlorinated dibenzo-p-furans. The best indicator parameter for PCDD/F World Health Organization toxic equivalent (WHO-TEQ) among the PCBz congeners investigated is 1,2,4,5-TCBz. This isomer is also significantly correlated with PCDD/F WHO-TEQ and with the sum of PCDD/F WHO-TEQ and PCB WHO-TEQ. However for samples with higher percentage of inhibitors the above mentioned relationship between the surrogate and WHO-TEQ disappeared. The PCB homologues and congeners show no correlation with PCBz and PCDD/F homologues and congeners.     

PCDD/F formation from oxy-PAH precursors in waste incinerator flyash

The yield of PCDD/F in relation to the presence of oxygenated PAH in model waste incinerator flyash has been investigated in a fixed bed laboratory scale reactor. Experiments were undertaken by thermal treatment of the model flyash at 250 and 350 °C under a simulated flue gas stream for 2 h. After reaction, the PCDD/F content of the reacted flyash and the PCDD/F released into the exhaust gas, and subsequently trapped by XAD-II resin in a down-stream condensation system were analyzed. The PAHs investigated were, dibenzofuran and benzo[b]naphtho[2,3-d]furan and were spiked onto the model flyash as reactant precursors for PCDD/F formation. The results showed significant formation of furans from both of the PAH investigated, however except from some highly chlorinated dioxin congeners, the formation of dioxins was not so common. Benzonaphthofuran was significantly more reactive than dibenzofuran in PCDD/F formation, in spite of the fact that dibenzofuran is structurally more similar to that of PCDD/F. Thus, there was no clear attribution between the chemical structure of PAH used and the formation of PCDD/F. There were considerable differences between the yields of PCDD/F congeners in the gaseous species and those in the reacted flyash under the same operational conditions. The concentration of PCDD/Fs was reduced at the higher reaction temperature of 350 °C; however, the higher temperature resulted in the majority of the PCDD/F formed on the flyash being released into the gas phase.     

Monitoring of polychlorinated dibenzo-p-dioxins and dibenzofurans, dioxin-like PCBs and polycyclic aromatic hydrocarbons in food and feed samples from Ismailia city, Egypt

Concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyl (PCBs) and polycyclic aromatic hydrocarbons (PAHs) have been determined using GC/HRMS in food (butter, seafood and meat) and feed samples (chicken, cattle and fish) purchased from Ismailia city, Egypt. PCDD/F concentrations in food samples ranged between 0.12 and 3.35 pg WHO TEQ/g wet w, while those in feed samples were between 0.08 and 0.2 pg WHO TEQ/g dry w. Levels of PCB TEQ ranged from 0.14 to 3.2 pg/g wet w in the food samples. The feed samples have an average of 0.35 pg PCB TEQ /g dry w. In this study, butter samples showed the highest contamination levels of PCDD/Fs and PCBs. The PCBs contribution to the total TEQ was on average 63% in seafood and on average 49% for meat and butter. The highest contamination levels of PCDD/Fs and PCBs were found in butter samples. The butter TEQ content is several times higher than that reported in all EU countries and exceeded the EU limits, while the PCDD/F levels in seafood and the feed samples is far below the current EU limit. Generally, congener profiles in the food samples reflect the non-industrialized nature of the city and suggest solid waste burning as a significant source of emission. Nevertheless, the profiles for butter suggest an impact from various sources. In the case of the sum of 16 PAH contamination levels in food samples were in the range of 11.7-154.3 ng/g wet w and feed samples had a range of 116-393 ng/g dry w. Benzo(a)pyrene (BaP) has been detected in the range of 0.05-3.29 ng/g wet w in the food samples; butter showed the highest contamination which exceeded the EU standard set for fats and oil. Fingerprints of PAHs suggested both petrogenic and pyrolytic sources of contamination.     

Feeding trial on rainbow trout: comparison of dry fish feed and Baltic herring as a source of PCDD/Fs and PCBs

Fish is an important source of dietary intake of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and polychlorinated biphenyls (PCBs). To assess bioaccumulation of PCDD/Fs and PCBs in farm-raised fish, rainbow trout were fed with either Baltic herring or dry fish feed. Baltic herring feed had a PCDD/F sum concentration of 125 ng kg(-1) dry weight (d.w.), and dry fish feed contained 18.2 ng kg(-1) d.w. of PCDD/Fs. The PCB concentrations of Baltic herring and dry fish feed were 188 and 48.7 microg kg(-1) d.w., respectively. After feeding with Baltic herring for 4 months, the PCDD/F concentration of the rainbow trout fillet was 27.3 ng kg(-1) fresh weight (f.w.), which was 7.0-fold higher than the initial concentration. The PCDD/F concentration and congener profile in rainbow trout had become almost the same as in Baltic herring. PCDD/Fs were accumulated in the fillet with an efficiency of 21%. Feeding of rainbow trout with dry fish feed resulted in a PCDD/F concentration of 8.08 ng kg(-1) f.w., denoting a 2.1-fold increase from the initial level. The accumulation efficiency was 29%. Time trends in PCB concentrations followed those of PCDD/Fs. After 4 months, the PCB sum concentration in herring-fed rainbow trout was 94.4 pg kg(-1) f.w., whereas in dry fish feed-fed rainbow trout it was 38.6 microg kg(-1) f.w. Accumulation efficiencies of PCBs were higher than those of PCDD/Fs. Based on the accumulated PCDD/F and PCB concentrations, it was estimated that frequent consumption of rainbow trout fed with Baltic herring could lead to a human daily intake that exceeds the recommendation of WHO.