Enhanced photocatalytic degradation of VOCs using Ln3+-TiO2 catalysts for indoor air purification

Two types of lanthanide ion-doped titanium dioxide (Ln3+-TiO2) catalysts including La3+-TiO2 and Nd3+-TiO2 were prepared by a sol-gel method. The effects of the lanthanide ion doping on the crystal structure, surface area, adsorption properties, pore size distribution, and surface chemical state of the catalysts were investigated by means of XRD, BET, and XPS. As results, the crystal size decreased significantly, while the specific surface area, t-plot total surface area, micropore volume, and the total pore volume increased owing to the lanthanide ion doping. The nitrogen adsorption-desorption isotherms of the catalysts showed that the N2 adsorption ability of the Ln3+-TiO2 catalysts was better than the TiO2 catalyst. Among them, the 0.7% Ln3+-TiO2 catalysts demonstrated the highest adsorption ability. The photocatalytic activity of the catalysts was investigated in the experiments of the photocatalytic degradation of benzene, toluene, ethylbenzene and o-xylene (BTEX) in a gaseous phase. The photocatalytic efficiency of the TiO2 catalysts with the lanthanide ion doping was remarkably enhanced by BTEX removal. The 1.2% Ln3+-TiO2 catalysts achieved the highest photocatalytic activity. The enhanced photodegradation of BTEX is possibly due to the improved adsorption ability and the enhanced electron-hole pairs separation due to the presence of Ti3+ on the surface of Ln3+-TiO2 catalysts and the electron transfer between the conduction band/defect level and lanthanide crystal field state.     

The preparation of Zn2+-doped TiO(2) nanoparticles by sol-gel and solid phase reaction methods respectively and their photocatalytic activities

The photocatalytic oxidation of the organic pollutants with TiO(2) as photocatalyst has been widely studied in the world, and many achievements have been made. The degradation of pollutants is highly related to the photocatalytic activity of TiO(2). It is demonstrated that doping ions to TiO(2) is one way to enhance the photocatalytic activity of TiO(2). In this paper, Zn(2+)-doped TiO(2) nanoparticles were prepared through sol-gel and solid phase reaction methods, characterized by means of X-ray diffraction (XRD) and transmission electron microscopy (TEM). The photocatalytic activity of the elaborated powders was studied following the degradation of Rhodamine B. The results showed that the photocatalytic activity of Zn(2+)-doped TiO(2) prepared by sol-gel method is close to that of pure TiO(2) particles, however, the photocatalytic activity of Zn(2+)-doped TiO(2) prepared by solid phase reaction method is much higher than that of pure TiO(2) particles. The most efficient degradation of Rhodamine B was found with TiO(2) particles doped with 0.5% Zn(2+) in mole and calcined at 500 degrees C. Also the reason for the enhancement of the photocatalytic activity of TiO(2) by Zn(2+) doping through solid phase reaction method was discussed.     

Photocatalytic oxidation of gaseous DMF using thin film TiO2 photocatalyst

The heterogeneous photocatalytic oxidation of gaseous N,N'-dimethylformamide (DMF) widely used in the manufacture of synthetic leather and synthetic textile was investigated. The experiments were carried out in a plug flow annular photoreactor coated with Degussa P-25 TiO2. The oxidation rate was dependent on DMF concentration, reaction temperature, water vapor, and oxygen content. Photocatalytic deactivation was observed in these reactions. The Levenspiel deactivation kinetic model was used to describe the decay of catalyst activity. Fourier transform infrared (FTIR) was used to characterize the surface and the deactivation mechanism of the photocatalyst. Results revealed that carbonylic acids, aldehydes, amines, carbonate and nitrate were adsorbed on the TiO2 surface during the photocatalytic reaction. The ions, NH4+ and NO3-, causing the deactivation of catalysts were detected on the TiO2 surface. Several treatment processes were applied to find a suitable procedure for the regeneration of catalytic activity. Among these procedures, the best one was found to be the H2O2/UV process.     

Fe^3＋掺杂TiO2/凹凸棒复合材料的光催化性能

采用酸催化的溶胶-凝胶法制备了一系列Fe^3＋掺杂TiO2/凹凸棒（Fe^3＋-TiO2/ATP）复合光催化剂材料。在可见光条件下,以亚甲基蓝（MB）溶液的光催化降解反应,评价了样品的光催化性能,研究了TiO2负载量、Fe^3＋掺杂量和焙烧温度对复合材料光催化性能的影响。在单因素实验的基础上,采用正交实验设计（L25（53））优化了催化剂的制备条件。光催化实验结果表明,MB在复合材料上的光催化降解反应遵循Langmuir-Hinshelwood（L-H）动力学模型。正交实验结果表明,当TiO2负载量为15%、Fe^3＋掺杂量为0.5%和焙烧温度为550℃时,得到的复合材料对MB的光催化降解效率最佳,测得表观反应速率常数kapp为6.09×10^-3min^-1,反应4 h后MB的降解率（Dt）可达75.88%,相同实验条件下与P25（1.51×10^-3min^-1）相比较,反应速率提高了4.03倍,降解率提高了45.05%。另外,复合材料的沉降性能优于P25,易于分离,是一类有应用前景的复合光催化剂。敏世雄王芳魏立强王永生冯雷佟永纯韩玉琦     

TiO₂ supported over SBA-15: an efficient photocatalyst for the pesticide degradation using solar light

Photocatalytic degradation and mineralization of pesticides are studied over TiO(2) supported mesoporous SBA-15 composite system using solar light. TiO(2) is immobilized over SBA-15 by solid sate dispersion method. The catalysts are characterized by XRD, surface area, UV-Vis diffused reflectance spectra, SEM and TEM. The detailed photocatalytic degradation studies are carried out over TiO(2), SBA-15 and different TiO(2) wt% supported SBA-15. The activity evaluation parameters such as catalyst amount, pH, and pollutant initial concentration are studied taking isoproturon as a model compound and established conditions for pesticide degradation. The optimum degradation is achieved over 10 wt% TiO(2)/SBA-15 within 30 min and the reaction is following pseudo-first order kinetics. The isoproturon mineralization is monitored with TOC reduction and it takes around 9h for disappearance. The commercial pesticide solutions containing imidacloprid and phosphamidon are also successfully degraded over these composites with the established conditions. The data indicates that 10 wt% TiO(2)/SBA-15 composite is an effective and highly active system for the pesticide degradations.     

水体中常见无机阳离子对TiO_2薄膜光催化还原Cr(Ⅵ)的影响

选择了6种水体中常见的阳离子(Na+、Mg2+、Ca2+、Al3+、Cu2+、Ni2+),分别考查了其对TiO2薄膜光催化还原Cr(Ⅵ)的影响;从光吸收、无机离子本身的性质对光生电子的捕获及传递等讨论了上述离子影响TiO2薄膜光催化还原Cr(Ⅵ)的反应速率的原因。结果表明:由于其不能捕获光生电子,Na+、Mg2+、Ca2+本身对TiO2薄膜光催化还原Cr(Ⅵ)的反应速率影响不大;Al3+吸引电子能力较强,成为光生电子和Cr(Ⅵ)之间的桥梁,促进了Cr(Ⅵ)的还原;浓度为1 mmmol/L时,Cu2+显著地促进了Cr(Ⅵ)的光催化还原,其主要原因是Cu2+捕获光生电子的能力很强,起到了催化剂的作用,而浓度大于10 mmol/L时,Cu2+形成单质Cu以及对紫外光的吸收都使促进作用降低;Ni2+未充满的d轨道具有获得并传递光生电子的能力,也促进了Cr(Ⅵ)的还原;在浓度同为1mmol/L时,对Cr(Ⅵ)光催化还原的促进作用依次为:Cu2+Al3+Ni2+Na+、Ca2+、Mg2+。     

Photocatalytic degradation of AZO dyes by supported TiO2 + UV in aqueous solution

The photocatalytic degradation performance of photocatalysts TiO2 supported on 13-X, Na-Y, 4A zeolites with different loading content was evaluated using the photocatalytic oxidation of dyes direct fast scarlet 4BS and acid red 3B in aqueous medium. The results showed that the best reaction dosage of TiO2-zeolite catalysts is about 2 g/l and the photocatalytic kinetics follows first order for all supported catalysts. The photocatalytic activity order of the three series catalysts is 13X type >Y type >4A type. The physical state of titanium dioxide on the supports is evaluated by X-ray photoelectron spectra (XPS), powder X-ray diffraction (XRD), BET, and FTIR.     

Photocatalytic degradation of pentachlorophenol on TiO2 sol-gel catalysts

The photocatalytic degradation of pentachlorophenol (PCP) in aqueous solution was investigated using TiO2 catalysts. The samples were prepared by the sol-gel method using different gelation pH and different calcination temperatures. The solids were characterized by specific surface area, X-ray diffraction, UV-Vis absorbance, FTIR and pentachlorophenol adsorption. The catalytic activity of the solids was evaluated in a conventional photoreactor at 298 K using 30 ppm of pentachlorophenol. It was found that the reaction follows a first-order reaction and the kinetic constant values change slightly with the pH of gelation and more significantly with the calcination temperature.     

The enhancement of TiO2 photocatalytic activity by hydrogen thermal treatment

In this study, conventional TiO2 powder was heated in hydrogen (H2) gas at a high temperature as pretreatment. The photoactivity of the treated TiO2 samples was evaluated in the photodegradation of sulfosalicylic acid (SSA) in aqueous suspension. The experimental results demonstrated that the photodegradation rates of SSA were significantly enhanced by using the H2-treated TiO2 catalysts and an optimum temperature for the H2 treatment was found to be of 500-600 degrees C. The in situ electron paramagnetic resonance (EPR) signal intensity of oxygen vacancies (OV) and trivalent titanium (Ti3+) associated with the photocatalytic activity was studied. The results proved the presence of OV and Ti3+ in the lattice of the H2-treated TiO2 and indicated that both were contributed to the enhancement of photocatalytic activity. Moreover, the experimental results presented that the EPR signal intensity of OV and Ti3+ in the H2-treated TiO2 samples after 10 months storage was still significant higher than that in the untreated TiO2 catalyst. The experiment also demonstrated that the significant enhancement occurred in the photodegradation of phenol using the H2-treated TiO2.     

纳米RuO2－TiO2光电催化处理农药废水研究

采用自制的负载型纳米RuO₂－TiO₂光催化剂对农药厂生产废水进行光电催化降解试验。考察了煅烧时间、催化剂用量、光辐照强度、电流密度、废水初始pH值和反应时间对废水COD和色度去除率的影响。结果表明，自制光催化剂光电催化性能显著，最佳光电催化活性是同样降解条件下、同样含量的Degussa P－25 TiO₂的1.38倍，是Ru_0.3Ti_0.7O₂的1.81倍。其COD和色度去除率分别为64.3%和95.2%。     

The enhanced PC and PEC oxidation of formic acid in aqueous solution using a Cu-TiO2/ITO film

The photocatalytic (PC) and photoelectrocatalytic (PEC) activity of Cu-TiO2/ITO films for degrading formic acid in aqueous solution was investigated in this study. Compared with a TiO2/ITO film, the degradation efficiency of formic acid on the Cu-TiO2 films increased markedly in both the PC and PEC oxidation processes. However, it was found that the photodeposited Cu metal on the Cu-TiO2 films could electrochemically dissolute during the PEC reaction, while an electrical bias with the voltage higher than 1.48 V was applied. It is believed this is a common problem occurred for several metals deposition on the TiO2 films, which results in a poor stability of the metal-deposited TiO2 electrode in PEC processes. To improve the stability of the Cu-TiO2 electrode, an alternative process between PC and PEC reactions was investigated. It was found that the dissolute Cu metal during the PEC process was re-deposited on the Cu-TiO2 film again during the PC process. The experiments with repeated runs demonstrated that this alternative process could not only overcome the loss of Cu, but also enhance the PEC oxidation efficiency of the Cu-TiO2 films.     

Photocatalytic production of hydrogen in single component and mixture systems of electron donors and monitoring adsorption of donors by in situ infrared spectroscopy

The photocatalytic production of hydrogen using aqueous Pt/TiO2 suspension has been investigated in single component and mixture systems of electron donors (pollutants). The reaction systems consisted of oxalic acid, formic acid and formaldehyde, respectively. The adsorption of these donors on TiO2 was also monitored by in situ attenuated total reflection infrared spectroscopy (ATRIR). In the single component systems, the efficiency order of electron donors is as follows: H2C2O4 > HCOOH > HCHO. The order is consistent with the order of adsorption affinity of the electron donors on TiO2 determined by ATRIR, which suggests a link between the strength of surface interaction and the efficiency of photocatalytic hydrogen evolution. In the binary mixture systems, competitive inhibition kinetics is observed. When a donor adsorbed strongly on TiO2 in a state of saturated adsorption in a binary system, the overall rate of the hydrogen evolution is consistent with that of decomposition of the donor, and the system can be treated as a single component system.     

Photocatalytic degradation of volatile organic compounds at the gas-solid interface of a TiO2 photocatalyst

In the present work, photocatalytic degradation of volatile organic compounds including gas-phase trichloroethylene (TCE), acetone, methanol and toluene over illuminated TiO2 was closely examined in a batch photoreactor as a function of water vapor, molecular oxygen and reaction temperature. Water vapor enhanced the photocatalytic degradation rate of toluene, but was inhibitive for acetone, and, there was an optimum water vapor concentration in the TCE and methanol removal. In a nitrogen atmosphere, it showed lower photocatalytic degradation rate than in air and pure oxygen. Thus, it could be concluded that oxygen is an essential component in photocatalytic reactions by trapping photogenerated electrons on the semiconductor surface and by decreasing the recombination of electrons and holes. As for the influence of reaction temperature, it was found that photocatalytic degradation was more effective at a moderate temperature than at an elevated temperature for each compound.     

Reduction of ferrate(VI) and oxidation of cyanate in a Fe(VI)-TiO2-UV-NCO- system

The aqueous photocatalytic degradation of cyanate (NCO(-)), which is a long-lived neurotoxin formed during the remediation of cyanide in industrial waste streams, was studied in the ferrate(VI)-UV-TiO2-NCO(-) system. Kinetics measurements of the photocatalytic reduction of ferrate(VI) were carried out as a function of [NCO(-)], [ferrate(VI)], [O(2)], light intensity (I(o)), and amount of TiO2 in suspensions at pH 9.0. The photocatalytic reduction rate of ferrate(VI) in the studied system can be expressed as -d[Fe(VI)]/dt=kI(o)(0.5) [NCO(-)] [TiO2]. The rate of photocatalytic oxidation of cyanate with ferrate(VI) was greater than the rate in the analogous system without ferrate(VI). The possibility of involvement of reactive ferrate(V) species for this enhancement was determined by studying the reactivity of ferrate(V) with NCO(-) in a homogeneous solution using a premix pulse radiolysis technique. The rate constant for the reaction of ferrate(V) and NCO(-) in alkaline medium was estimated to be (9.60+/-0.07) x 10(2) M(-1) s(-1), which is much slower than the ferrate(VI) self-decomposition reaction (k approximately 10(7) M(-1) s(-1)). An analysis of the kinetic data in the Fe(VI)-UV-TiO2-NCO(-) system suggests that ferrate(V) is not directly participating in the oxidation of cyanate. Possible reactions in the system are presented to explain results of ferrate(VI) reduction and oxidation of cyanate.     

Study on the photocatalytic degradation of glyphosate by TiO(2) photocatalyst

In this paper, the photocatalytic degradation of glyphosate selected as the deputy of organic pollutant in aqueous solution with TiO(2) powder as a photocatalyst has been studied. The effects of various parameters, such as the amount of the photocatalyst, illumination time, initial pH value, electron acceptors, metal ions, and anions on the photocatalytic degradation of glyphosate were investigated. From the studies, the best condition for the effect of the parameters on the photocatalytic degradation of glyphosate was obtained. The results show that the optimum amount of the photocatalyst used is 6.0 g l(-1) for the photocatalytic reactions. The photodegradation efficiency of glyphosate increases with the increase of the illumination time. With the addition of Fe(3+), Cu(2+), H(2)O(2), K(2)S(2)O(8) or KBrO(3), the photocatalytic degradation of glyphosate is accelerated. However, with the addition of Na(+), K(+), Mg(2+), Ca(2+), Zn(2+), Co(2+) and Ni(2+), or with the addition of trace amounts of Cl(-), Br(-), SO(4)(2-), there are no obvious effects on the reactions. Acidic or alkaline mediums are favorable for the photocatalytic degradation of glyphosate. The possible roles of the additives on the reactions and the possible mechanisms of effect were discussed.     

碘掺杂Ti02可见光光催化性能研究

在低于100℃温度条件下，采用溶胶一凝胶法以钛酸正丁酯为钛源，碘酸钾为碘源，制备了I掺杂纳米TiO2催化剂（I-TiO2），运用x-射线衍射（XRD）、透射电镜（TEM）及x-射线光电子能谱（XPS）等对催化剂进行表征，结果表明，TiO2及I-TiO2催化剂均为锐钛矿，I吸附并包裹在TiO2表面或以间隙进入的形式存在，并未进入TiO2晶格。通过在可见光照射下（A〉420nm）以罗丹明B（RhodamineB，RhB）的光催化降解为探针反应研究了在不同条件下制备催化剂的催化性能，结果表明，掺杂比为n1：n^ti=0．05：l，焙烧温度为400℃，降解介质条件pH=7时，l-TiO2光催化活性明显优于未掺杂的TiO2。光催化降解过程通过红外光谱（IR），总有机碳（TOC）跟踪测定，比较了TiO2掺杂前后降解RhB和对氯苯酚（4-CP）的光催化特性差异；同时采用苯甲酸荧光光度法跟踪测定体系中的氧化物种，表明在可见光下，I-TiO2光催化体系中产生·OH高活性氧化物种从而氧化降解目标化合物。     

Photocatalytic degradation of lignin using Pt/TiO2 as the catalyst

Photocatalytic degradation of lignin was studied with the use of catalysts TiO(2) and Pt/TiO(2). The influence of several experimental parameters, i.e. pH, catalyst dosage and illumination on lignin degradation was investigated. The results showed that application of UV irradiation alone has almost no effect on the reduction of dissolved organic carbon (DOC) and American Dye Manufacture Institute value (ADMI). However, the addition of TiO(2) and Pt/TiO(2) reduced the original DOC (251 mg l(-1)) by more than 40% within 30 min of treatment and the reaction can be simulated with pseudo-first order kinetics. Rapid degradation of lignin was observed in acidic solution using either TiO(2) or Pt/TiO(2) as the catalyst compared to high pH cases. The content of Pt in the Pt/TiO(2) catalyst is 1%. In addition, too much catalyst addition has not increased the DOC and ADMI reduction proportionally. The investigation also indicated that the photocatalytic degradation rates could be enhanced 1-6 times faster after doping TiO(2) with Pt in different pH cases. A modified Nernst type model was adopted to simulate the decoloring process using TiO(2) and Pt/TiO(2) based on the profiles of oxidation reduction potential during the photocatalytic reaction. The developed equation can be used to predict the color removal efficiency of lignin wastewater by the photocatalytic process.     

Comparison of catalytic activity of two platinised TiO2 films towards the oxidation of organic pollutants

Two types of platinised TiO2 films, i.e., Pt-TiO2/ITO and Pt(TiO2)/ITO, were prepared by a procedure of dip-coating and subsequent photo-deposition, and photo-deposition and subsequent dip-coating, respectively. They were well characterized by DRS, XRD spectra, SEM microscopy and photoelectrochemical measurement. Their photocatalytic, dark catalytic and photoelectrocatalytic activities were investigated using formic acid as a model organic pollutants. Compared with pure TiO2/ITO film, the photocatalytic activity of the platinised TiO2 films were apparently improved. However, the improvement was considerably dependent on the preparation method of these films. Pt-TiO2/ITO not only possessed higher photocatalytic activity but also showed a dark catalytic activity towards HCOOH degradation. As a sequence, it was first emphasized that the dark catalytic effect of Pt-TiO2/ITO was partly responsible for degradation of formic acid in the photocatalytic oxidation process. Although the Pt(TiO2)/ITO film does not exhibit the dark catalytic activity, its photocatalytic degradation efficiencies towards HCOOH are higher than that of Pt-TiO2/ITO film. Therefore, in view of enhanced photocatalytic activity, the Pt(TiO2)/ITO was more favored than Pt-TiO2/ITO film.     

纳米TiO2光催化氧化去除水中痕量双氯芬酸的研究

以TiCl4为前驱体,采用水解法经不同温度煅烧制备了具有不同理化性能的纳米TiO2光催化剂。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、物理吸附仪、紫外—可见光漫反射吸收光谱(UV-Vis DRS)等手段对纳米TiO2的晶相结构、粒径、孔径分布以及禁带宽度等进行了表征。以蒸馏水配制的双氯芬酸溶液为目标物,进行了纳米TiO2光催化氧化去除双氯芬酸的活性测试,研究了纳米TiO2的理化性能与光催化氧化活性之间的关系。结果表明,经400℃煅烧制得的纳米TiO2样品具有最高的光催化氧化活性,其在紫外光照射60min下对双氯芬酸的去除率为98%左右,比单独紫外光照射高出85百分点。纳米TiO2光催化氧化去除双氯芬酸的反应近似一级反应动力学模型,其中经400℃煅烧制得的纳米TiO2光催化氧化去除双氯芬酸的表观反应速率常数为0.054 54min-1,是普通商用TiO2的2倍左右,与德国Degussa P-25TiO2的光催化氧化活性最相近。     

Superior pillared clay catalysts for selective catalytic reduction of nitrogen oxides for power plant emission control

Fe(3+)-, Cr(3+)-, Cu(2+)-, Mn(2+)-, Co(2+)-, and Ni(2+)-exchanged Al2O3-pillared interlayer clay (PILC) or TiO2-PILC catalysts are investigated for the selective catalytic reduction (SCR) of nitric oxide by ammonia in the presence of excess oxygen. Fe(3+)-exchanged pillared clay is found to be the most active. The catalytic activity of Fe-TiO2-PILC could be further improved by the addition of a small amount of cerium ions or cerium oxide. H2O and SO2 increase both the activity and the product selectivity to N2. The maximum activity on the Ce-Fe-TiO2-PILC is more than 3 times as active as that on a vanadium catalyst. Moreover, compared to the V2O5-WO3/TiO2 catalyst, the Fe-TiO2-PILC catalysts show higher N2/N2O product selectivities and substantially lower activities (by approximately 85%) for SO2 oxidation to SO3 under the same reaction conditions. A 100-hr run in the presence of H2O and SO2 for the CeO2/Fe-TiO2-PILC catalyst showed no decrease in activity.