Correlation relationships between physico-chemical properties and gas chromatographic retention index of polychlorinated-dibenzofurans

Correlation relationships between physico-chemical properties including vapor pressures (P), water solubilities (S), Henry's law constants (H(c)), n-octanol-water partition coefficients (K(ow)), sediment-water partition coefficient (K(pw)) and biotic lipid-water partition coefficient (K(bw), bioconcentration factor) of polychlorinated-dibenzofurans (PCDFs) and their gas chromatographic retention indices (GC-RIs) were established. A model equation between GC-RIs (= RI) and these physico-chemical properties (K) of PCDFs was in a form of log K = aRI2 + bRI + c with correlation coefficients (R2) greater than 0.94, except H(c). These equations were derived from six experimental data (five experimental data for log K(bw)) in each physico-chemical properties of PCDFs reported previously. The values of log P, log S, log H(c), log K(ow), log K(pw) and log K(bw) of PCDFs predicted by these equations based on their GC-RIs in the present study derviated from those calculated by the solubility parameters for fate analysis method in a previous study by 0.49, 0.32, 0.11, 0.34, 0.14 and 0.22 log units, respectively.     

Evaluation of the dependence of aqueous solubility of nitro compounds on temperature and salinity: a COSMO-RS simulation

The solubility in pure and saline water at various temperatures was calculated for selected nitro compounds (nitrobenzene, 1,3,5-trinitrobenzene, 2-nitrotoluene, 3-nitrotoluene, 4-nitrotoluene, 2,4-dinitrotoluene, 2,6-dinitrotoluene, 2,3-dinitrotoluene, 3,4-dinitrotoluene, 2,4,6-trinitrotoluene) using the Conductor-like Screening model for Real Solvents (COSMO-RS). The results obtained were compared with experimental values. The COSMO-RS predictions have shown high accuracy in reproducing the trends of aqueous solubilities for both temperature and salinity. The proposed methodology was then applied to predict the aqueous solubilities of 19 nitro compounds in the temperature range of 5-50 °C in saline solutions. The salting-out parameters of the Setschenow equation were also calculated. The predicted salting-out parameters were overestimated when compared to the measured values, but these parameters can still be used for qualitative estimation of the trends.     

Role of some organic inhibitors on the oxidation of dissolved sulfur dioxide by oxygen in rainwater medium

In August 2012, eight rainwater samples were collected and analyzed for pH and metal ions, viz., iron, copper, and manganese. The pH was within the range 6.84–7.65. The rate of oxidation of dissolved sulfur dioxide was determined using these rainwater samples as reaction medium. Kinetics was defined by the rate law: ?d[S(IV)]/dt = R _o = k _o[S(IV)]], where k _o is the first-order rate constant and R _o is the rate of the reaction. The effect of two volatile organic compounds—ethanol and 2-butanol—was examined and found to inhibit the oxidation as defined by the rate law: k _obs = k _o/(1 + B [Inh]), where k _obs is the first-order rate constant in the presence of the inhibitor, [Inh] is the concentration of the inhibitor, and B is the inhibitor parameter—an empirical constant. In the pH range of collected rainwater samples, the values of first-order rate constants ranged from 3.1?×?10^?5 to 1.5?×?10^?4 s^?1 at 25 °C. The values of inhibition parameter were found to be (5.99?±?3.91?×?10⁴) (ethanol) and (3.95?±?2.36)?×?10⁴ (2-butanol) at 25 °C.     

Salting-out phenomenon and 1-octanol/water partition coefficient of metalaxyl pesticide

In this paper, we present the effect of inorganic cations such as Na⁺, K⁺, Ca²⁺, Mg²⁺ on the salting-out phenomenon of metalaxyl from pure water to aqueous salt solutions. Moreover the 1-octanol/water partition coefficient in pure water is presented. To accomplish this, aqueous solubility of metalaxyl was determined in pure water, in different salt solution (NaCl, KCl, CaCl₂ and MgCl₂), and at different concentration level ranging from 0.01 to 1.5 M. The 1-octanol/water partition coefficient was determined using the static shake-flask method. Solubility was determined using dynamic saturation method for pure water in the range of 298.15-325.15 K and at 298.15 K for different salt solutions. The solubility value in pure water for studied interval was found constant (m = 3.118 × 10⁻² mol kg⁻¹).Solubility values were used to calculate the standard molar Gibbs free energy of dissolution (Δ_solG°) and transfer (Δ_trG°) at 298.15 K. The values of Δ_trG° from pure to all studied aqueous salt solutions did not exceed 2 kJ mol⁻¹, the value of Δ_solG° of dissolution is 18.5 ±0.72 kJ mol⁻¹. The 1-octanol/water partition coefficient in pure water log K_o/w is equal to 1.69. The obtained results confirm the classification of the neutral metalaxyl as a slightly hydrophobic molecule.     

Vapour pressures, aqueous solubilities, Henry's Law constants, and octanol/water partition coefficients of a series of mixed halogenated dimethyl bipyrroles

Basic physical-chemical properties of five bromine and chlorine containing mixed halogenated dimethyl bipyrroles (HDBPs) were determined using established methods. Subcooled liquid vapour pressures (P(o)(L,25)), aqueous solubilities (S(w,25)), and octanol/water partition coefficients (K(ow)) were determined using the gas chromatography-retention time, generator column, and slow-stirring methods, respectively. Henry's Law constants (H25) were estimated using experimentally-derived P(o)(L) and S(w,25) data. Values of all four properties were generally similar to those reported for other polyhalogenated aromatic compounds [P(o)(L,25) = (7.55-191) x 10(-6) Pa; S(w,25) = (1.0-1.9) x 10(-5) g/l; log K(ow) = 6.4-6.7; H25 = 0.0020-0.14 Pa m3/mol]. The effect of replacing a chlorine with a bromine atom significantly decreased P(o)(L,25) (log P(o)(L,25) = -0.4197 (# bromine atoms) - 2.643, p<0.01) and H25 (log H25 = -0.508 (# bromine atoms) + 0.394, p<0.02). There were no significant effects of bromine/chlorine substitution on S(w,25) or K(ow). A simple Level I equilibrium partitioning model predicted the environmental behaviour of HDBPs to be similar to a tetrabrominated diphenyl ether. Only slight differences in behaviour amongst HDBP congeners were predicted since substitution of a bromine for a chlorine (Cl/Br substitution) atom had less effect than H/Cl or H/Br substitution on P(o)(L,25), S(w,25), H25, and K(ow).     

Temperature dependent properties of environmentally important synthetic musks

Environmental fate determining physical properties including their temperature dependence for five nitro musks and for seven polycyclic musks were estimated. The properties evaluated were vapor pressure in a solid and liquid state (PS and PL), solubility in water (S), Henry's law coefficient (H = PL/S) and log octanol-water partition coefficient (log KOW). Gas chromatography for starting values of vapor pressure estimation and HPLC experiments at 5-20 degrees C for comparison of the theoretical versus experimental solubilities in water were performed. The values of temperature (T) dependence coefficients (Ai and Bi) in equations: log (Property)i = Ai - Bi/T were determined. Values of properties were compared with literature-based data, and an example of their use in environmental hazard estimation by fate modeling was given.     

The influence of hydroxyl volatile organic compounds on the oxidation of aqueous sulfur dioxide by oxygen

Although the effect of volatile organic compounds (VOCs) on the oxidation of dissolved sulfur dioxide by oxygen has been the subject of many investigations, this is the first study which examines the effect of a large number of precisely 16 hydroxy compounds. The kinetics both in the absence and the presence of VOCs was defined by rate laws (A and B): A $$ \hbox{-} \mathrm{d}\left[\mathrm{S}\left(\mathrm{IV}\right)\right]/\mathrm{dt}={R}_o={k}_o\left[\mathrm{S}\left(\mathrm{IV}\right)\right] $$ B $$ \hbox{-} \mathrm{d}\left[\mathrm{S}\left(\mathrm{IV}\right)\right]/\mathrm{dt}={R}_i={k}_i\left[\mathrm{S}\left(\mathrm{IV}\right)\right] $$ where R _o and k _o are the initial rate and first-order rate constant, respectively, in the absence of VOCs, R _i , and k _i are the initial rate and the first-order rate constant, respectively, in the presence of VOCs, and [S(IV)] is the concentration of dissolved sulfur dioxide, sulfur(IV). The nature of the dependence of k _i on the concentration of inhibitor, [Inh], was defined by Eq. (C). C $$ {k}_i={k}_0/\left(1+B\left[\mathrm{Inh}\right]\right) $$ where B is an empirical inhibition parameter. The values of B have been determined from the plots of 1/k _i versus [Inh]. Among aliphatic and aromatic hydroxy compounds studied, t-butyl alcohol and pinacol were without any inhibition effect due to the absence of secondary or tertiary hydrogen. The values of inhibition parameter, B, were related to k _inh , the rate constant for the reaction of SO₄ ^? radical with the inhibitor, by Eq. (D). D $$ B=\left(9\pm 2\right)\times 1{0}^{-4}\times {k}_{inh} $$ Equation (D) may be used to calculate the values of either of B or k _inh provided that the other is known. The extent of inhibition depends on the value of the composite term, B[Inh]. However, in accordance with Eq. (C), the extent of inhibition would be sizeable and measurable when B[Inh]?>?0.1 and oxidation of S(IV) would be almost completely stopped when B[Inh]?≥?10. B[Inh] value can be used as a guide whether the reaction step: SO₄ ^??+?organics? \( \overset{k_{inh}}{\to } \) ?SO₄ ^2??+?non-chain products: should be included in the multiphase models or not.     

Aqueous solubility, effects of salts on aqueous solubility, and partitioning behavior of hexafluorobenzene: experimental results and COSMO-RS predictions

The aqueous solubility of hexafluorobenzene has been determined, at 298.15 K, using a shake-flask method with a spectrophotometric quantification technique. Furthermore, the solubility of hexafluorobenzene in saline aqueous solutions, at distinct salt concentrations, has been measured. Both salting-in and salting-out effects were observed and found to be dependent on the nature of the cationic/anionic composition of the salt. COSMO-RS, the Conductor-like Screening Model for Real Solvents, has been used to predict the corresponding aqueous solubilities at conditions similar to those used experimentally. The prediction results showed that the COSMO-RS approach is suitable for the prediction of salting-in/-out effects. The salting-in/-out phenomena have been rationalized with the support of COSMO-RS σ-profiles. The prediction potential of COSMO-RS regarding aqueous solubilities and octanol-water partition coefficients has been compared with typically used QSPR-based methods. Up to now, the absence of accurate solubility data for hexafluorobenzene hampered the calculation of the respective partition coefficients. Combining available accurate vapor pressure data with the experimentally determined water solubility, a novel air-water partition coefficient has been derived.     

An integrated assessment of seawater intrusion in a small tropical island using geophysical,geochemical, and geostatistical techniques

In this study, geophysics, geochemistry, and geostatistical techniques were integrated to assess seawater intrusion in Kapas Island due to its geological complexity and multiple contamination sources. Five resistivity profiles were measured using an electric resistivity technique. The results reveal very low resistivity <1 Ωm, suggesting either marine clay deposit or seawater intrusion or both along the majority of the resistivity images. As a result, geochemistry was further employed to verify the resistivity evidence. The Chadha and Stiff diagrams classify the island groundwater into Ca-HCO₃, Ca-Na-HCO₃, Na-HCO₃, and Na-Cl water types, with Ca-HCO₃ as the dominant. The Mg²⁺/Mg²⁺+Ca²⁺, HCO₃ ^?/anion, Cl^?/HCO₃ ^?, Na⁺/Cl^?, and SO₄ ^2?/Cl^? ratios show that some sampling sites are affected by seawater intrusion; these sampling sites fall within the same areas that show low-resistivity values. The resulting ratios and resistivity values were then used in the geographical information system (GIS) environment to create the geostatistical map of individual indicators. These maps were then overlaid to create the final map showing seawater-affected areas. The final map successfully delineates the area that is actually undergoing seawater intrusion. The proposed technique is not area specific, and hence, it can work in any place with similar completed characteristics or under the influence of multiple contaminants so as to distinguish the area that is truly affected by any targeted pollutants from the rest. This information would provide managers and policy makers with the knowledge of the current situation and will serve as a guide and standard in water research for sustainable management plan.     

Numerical technique for estimating equilibrium concentrations from initial concentrations when using the freundlich adsorption equation

Abstract

The Freundlich equation, X/m = K C_e ^N, is frequently used to express the partitioning of pesticides between solid (soil, sediment) and aqueous phases. When designing adsorption‐desorption experiments, it would be useful to be able to estimate the equilibrium concentration, C_e, in terms of the initial concentration, C_o, if reasonable estimates of K and N can be made. Because of the usual non‐integer nature of N, only a numerical solution of the Freundlich equation is possible for C_e in terms of C_o. A simple computer program is presented which produces almost an exact solution for the value of C_e.     

Kinetics of Sulfur-Oxide Formation in Flames: II. Low Pressure H2S Flames

The microstructure of 1/10 and 1/20 atmosphere, lean H₂S—O₂—N₂ flames is developed using the mass-spectrometric flame-sampling technique. The flame mechanism developed is in agreement with that determined from an earlier study on 1-atm H₂S flames. The formation of SO₂ appears to be primarily related to the production of SH and the ensuing oxidation steps SH + O₂ = SO + OH and SO + O₂ = SO₂ + O. While there is some question whether SO₂ formation occurs via an SO or an S₂O intermediate, the present study does not give direct support to the role of S₂O in the oxidation mechanism. However, the presence of significant quantities of free sulfur in the pre-flame zone may be indicative of S₂O formation via SO + S → S₂O, and, possibly, via the disproportionation of SO, 3SO → S₂O + SO₂. Kinetic analyses of some of the pre-flame reactions indicate an apparent activation energy of 17,300 calories/mole for the decomposition of H₂S. The actual initiation process in the flame mechanism requires further examination. The specific rate for the reaction step H₂S + O = OH + SH is given by k ₆ = 1.45 × 10₁₅ exp ( – 6600/RT) cm³ mole^–1 sec^–1, and the specific rate for the oxidation of SO, SO + O₂ = SO₂ + O, is given by k ₅ = 5.2 × 10₁₄ exp (—19,300/RT) cm³ mole^–1 sec^–1.     

Sorption of chlorpyrifos and fonofos on four soils and turfgrass thatch using membrane filters

Abstract

Chemical transport in soil is a major factor influencing soil and water contamination. Four soils and turfgrass thatch, representing a wide range of organic carbon OC content were studied to determine sorption K_d and K_f parameters for the insecticides chlorpyrifos and fonofos. The batch equilibrium method was used. The concentration of insecticide was measured in the solution as well as in the solid phase to determine the most accurate sorption data. Four soils and thatch were equilibrated for 24 h at 22 ± 1^OC with aqueous insecticide solutions. Four concentrations of the insecticides, each <50% of their respective water solubilities, were selected for the experiments. After extraction with an organic solvent, the concentration of insecticides in the aqueous solution was determined by gas liquid chromatography using electron capture detection for chlorpyrifos, and nitrogen/phosphorus detection for fonofos. Data obtained were fitted to the log and simple linear form of the Freundlich equation. Mass balance Freundlich isotherm exponents n ranged between 0.82 and 0.93 for chlorpyrifos. 0.82 and 1.21 for fonofos, with r² ≥ 0.97. K_oc (percent of organic carbon %OC normalized Sorption coefficient) values were calculated by using experimentally developed K_d and K_f coefficients in relation to OC levels from 0.29 to 34.85%. K_d and K_f coefficients of both insecticides were positively correlated with OC (r² ≥ 0.96). organic matter OM (r² ≥ 0.96), and cation exchange capacity CEC (r² ≥ 0.90).     

Removal of arsenic species from water by batch and column operations on bagasse fly ash

Bagasse fly ash (BFA, a sugar industrial waste) was used as low-cost adsorbent for the uptake of arsenate and arsenite species from water. The optimum conditions for the removal of both species of arsenic were as follows: pH 7.0, concentration 50.0 μg/L, contact time 50.0 min, adsorbent dose 3.0 g/L, and temperature 20.0 °C, with 95.0 and 89.5 % removal of arsenate and arsenite, respectively. The Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich adsorption isotherms were used to analyze the results. The results of these models indicated single-layer uniform adsorption on heterogeneous surface. Thermodynamic parameters, i.e., ΔG°, ΔH°, and ΔS°, were also calculated. At 20.0 to 30.0 °C, the values of ΔG° lie in the range of ?4,722.75 to ?4,878.82 and ?4,308.80 to ?4,451.73 while the values of ΔH° and ΔS° were ?149.90 and ?121.07, and 15.61 and 14.29 for arsenate and arsenite, respectively, indicating that adsorption is spontaneous and exothermic. Pseudo-first-order kinetics was followed. In column experiments, the adsorption decreased as the flow rate increased with the maximum removal of 98.9 and 95.6 % for arsenate and arsenite, respectively. The bed depth service time and Yoon and Nelson models were used to analyze the experimental data. The adsorption capacity (N _o) of BFA on column was 3.65 and 2.98 mg/cm³ for arsenate and arsenite, respectively. The developed system for the removal of arsenate and arsenite species is economic, rapid, and capable of working under natural conditions. It may be used for the removal of arsenic species from any contaminated water resources.     

Estimating the vapor pressures of multi-functional oxygen-containing organic compounds using group contribution methods

A UNIFAC-based method for estimating the vapor pressure (p_L^o) values of oxygen-containing compounds of intermediate-to-low volatility has been developed as an aid in modeling the formation and behavior of organic aerosols. This UNIFAC-p_L^o method was constructed using a set of 76 compounds with experimentally determined p_L^o values. The compounds chosen are of intermediate-to-low volatility and contain multiple oxygen-containing functionalities. For test and development purposes, the 76 compounds were divided into a basis set of 43 compounds used to generate the coefficients required in the UNIFAC-p_L^o method and a second set of 33 compounds that was used to test the coefficients generated using the basis set. Both the basis and test sets contained compounds that possessed similar structures and functionalities. For the 33 compounds in the test set, on average UNIFAC-p_L^o predicted the p_L^o values to within a factor of 2 over the temperature range 290–320 K. Furthermore, the UNIFAC-p_L^o method did not show any correlation in prediction error with p_L^o so that it was equally likely to underpredict as overpredict p_L^o regardless of volatility. For comparison, three other vapor pressure estimation methods were applied to the test set of compounds. On average, these other methods all predicted the test set p_L^o values to within a factor of 3 over the temperature range 290–320 K. In contrast to the UNIFAC-p_L^o method, the prediction errors from the methods were found to be correlated with p_L^o so that the other methods overpredicted p_L^o as volatility decreased.     

Degradation of bisphenol A in aqueous solution by persulfate activated with ferrous ion

Degradation of bisphenol A (BPA) in aqueous solution was studied with high-efficiency sulfate radical (SO₄ ^?·), which was generated by the activation of persulfate (S₂O₈ ^2?) with ferrous ion (Fe²⁺). S₂O₈ ^2? was activated by Fe²⁺ to produce SO₄ ^?·, and iron powder (Fe⁰) was used as a slow-releasing source of dissolved Fe²⁺. The major oxidation products of BPA were determined by liquid chromatography-mass spectrometer. The mineralization efficiency of BPA was monitored by total organic carbon (TOC) analyzer. BPA removal efficiency was improved by the increase of initial S₂O₈ ^2? or Fe²⁺ concentrations and then decreased with excess Fe²⁺ concentration. The adding mode of Fe²⁺ had significant impact on BPA degradation and mineralization. BPA removal rates increased from 49 to 97 % with sequential addition of Fe²⁺, while complete degradation was observed with continuous diffusion of Fe²⁺, and the latter achieved higher TOC removal rate. When Fe⁰ was employed as a slow-releasing source of dissolved Fe²⁺, 100 % of BPA degradation efficiency was achieved, and the highest removal rate of TOC (85 %) was obtained within 2 h. In the Fe⁰–S₂O₈ ^2? system, Fe⁰ as the activator of S₂O₈ ^2? could offer sustainable oxidation for BPA, and higher TOC removal rate was achieved. It was proved that Fe⁰–S₂O₈ ^2? system has perspective for future works.     

Respiratory uptake kinetics of neutral hydrophobic organic chemicals in a marine benthic fish, Pseudopleuronectes yokohamae

We investigated the respiratory uptake kinetics of polychlorinated biphenyls (PCBs), organohalogen pesticides (OCPs), polycyclic aromatic hydrocarbons (PAHs), and 2,2′,4,4′-tetrabrominated diphenyl ether (BDE #47) in a marine benthic fish, Pseudopleuronectes yokohamae. The respiratory uptake efficiencies (E_W) of the chemicals, of which there have been no reports for the majority of persistent organic pollutants (POPs), were obtained by measuring the respiratory uptake rate constants (k₁) and the oxygen consumption rates of fish. Fish were exposed to water in which these chemicals were dissolved at environmentally relevant concentrations for 28 d, followed by 168 d of depuration in clean seawater. The k₁ and E_W values for 99 compounds were obtained, and they ranged from 2000 to 42 000 L kg-lipid⁻¹ d⁻¹ and from 0.060 to 1.3, respectively. The E_W values of the chemicals, except for PAHs, tended to increase with increasing values of the log octanol–water partition coefficients (K_OW) of the chemicals up to a log K_OW of 5. For log K_OW in the range 3–5, the E_W values in this study were much lower than those in a published study (about one-third). As a result of analysis by a two-phase resistance model, the resistance of transport rates to the lipid phase in this study was lower than was the case in the published study. These findings indicate that the E_W predicted by the published study for log K_OW in the range 3–5 may differ among fish species and water temperature, and further study is needed.     

Removal of Cr(VI) onto Ficus carica biosorbent from water

The utilization of sustainable and biodegradable lignocellulosic fiber to detoxify the noxious Cr(VI) from wastewater is considered a versatile approach to clean up a contaminated aquatic environment. The aim of the present research is to assess the proficiency and mechanism of biosorption on Ficus carica bast fiber via isotherm models (Langmuir, Freundlich, Temkin, Harkin’s–Jura, and Dubinin–Radushkevich), kinetic models, and thermodynamic parameters. The biomass extracted from fig plant was characterized by scanning electron microscopy and Fourier-transform infrared spectroscopy. To optimize the maximum removal efficiency, different parameters like effect of initial concentration, effect of temperature, pH, and contact time were studied by batch method. The equilibrium data were best represented by the Langmuir isotherm model, and the maximum adsorption capacity of Cr(VI) onto biosorbent was found to be 19.68 mg/g. The pseudo-second-order kinetic model adequately described the kinetic data. The calculated values of thermodynamic parameters such as enthalpy change (?H ⁰), entropy change (?S ⁰), and free energy change (?G ⁰) were 21.55 kJ/mol, 76.24 J/mol?K, and ?1.55 kJ/mol, respectively, at 30 °C which accounted for spontaneous and endothermic processes. The study of adsorbent capacity for Cr(VI) removal in the presence of Na⁺, Mg²⁺, Ca²⁺, SO ₄ ^2? , HCO ₃ ^? and Cl^? illustrated that the removal of Cr(VI) increased in the presence of HCO^3? ions; the presence of Na⁺, SO ₄ ^2? or Cl^? showed no significant influence on Cr(VI) adsorption, while Ca²⁺ and Mg²⁺ ions led to an insignificant decrease in Cr(VI) adsorption. Further, the desorption studies illustrated that 31.10 % of metal ions can be removed from an aqueous system, out of which 26.63 % of metal ions can be recovered by desorption in first cycle and the adsorbent can be reused. The results of the scale-up study show that the ecofriendly detoxification of Cr(VI) from aqueous systems was technologically feasible.     

QSPR for prediction of subcooled vapor pressures (log PL) of polychlorinated trans-azobenzenes

In this study the values of subcooled vapor pressures (log P_L) were estimated for 209 trans chloroazobenzenes (Ct-ABs) that fill some gaps in analytical and experimental data on these compounds. There are 209 chloro derivatives of trans azobenzenes that are relatively stable and more environmentally relevant than 209 chloro cis congeners. The calculations models were based on the Quantitative Structure-Property Relationship (QSPR) scheme using the semi-empirical method (PM6) in molecular package (MOPAC) software and density functional theory (DFT) method using B3LYP functional and 6-311++G** basis set) in Gaussian 03 software method and the artificial neural networks (ANNs) prediction. The values of log P_L predicted by models used varied between ?3.94 to ?2.66 for Mono-; ?4.85 to ?2.97 for Di-; ?5.18 to ?3.17 for Tri-; ?6.02 to ?3.77 for Tetra-; ?6.64 to ?4.64 for Penta-; ?7.36 to ?4.76 for Hexa-; ?7.54 to ?5.79 for Hepta-; ?7.75 to ?6.64 for Octa-; ?7.89 to ?7.44 for Nona-Ct-Abs; and ?8.09 and ?8.13 for Deca-Ct-AB. Based on these values Ct-ABs can be grouped localized among relatively low (log P_L ?4 to ?2) and low (log P_L < ?4) mobile Persistent Organic Pollutants (POPs). Both the calculation methods employed were characterized by similar prediction ability of subcooled vapor pressure values of Ct-ABs, while those of PM6 are much more efficient due to a cheaper hardware used and around 300-fold less time spent on calculations.