Ce掺杂纳米TiO2光催化剂的制备及降解甲醛的研究

介绍了溶胶-凝胶法制备Ce离子掺杂纳米TiO2的工艺流程.采用X射线衍射(XRD)、紫外可见分光光度法(UV-Vis)等方法表征了Ce掺杂TiO2的相组成、紫外可见漫反射率与掺杂量的关系.结果表明,掺杂的TiO2在520℃、650℃焙烧2 h呈锐钛矿结构,在520℃焙烧2 h的TiO2的晶粒尺寸大约为20 nm,而掺杂Ce后其晶粒尺寸均减小,大约为12nm.UV-Vis吸光度分析表明,掺Ce后吸收带边明显发生红移,但随着Ce掺杂浓度的增大,其对可见光的吸收影响不大.光催化降解反应表明,未掺杂Ce的TiO2反应2 h后对甲醛的没有降解作用,而Ce掺杂TiO2反应2 h后甲醛降解率达15%.     

铂铈共掺杂纳米TiO2的制备、表征及光催化性能

以钛酸四丁酯为前驱体，过氧化氢为氧化剂，采用简单易行的低温氧化法制备出晶粒尺寸较小（平均尺寸25nm）的二氧化钛纳米粒子。通过贵金属Pt掺杂TiO2（Pt-TiO2）、稀土元素Ce掺杂TiO2（Ce-TiO2）和Pt、Ce共掺杂TiO2（Pt／Ce-TiO2）的掺杂的方法对二氧化钛进行改性。通过XRD，XPS，TEM，紫外漫反射等表征手段对制备的样品进行表征。通过可见光下降解罗丹明B来测试其光催化活性。实验结果表明，由ce掺杂的TiO2光催化剂对有机污染物的最大降解能力略大于Pt掺杂的TiO2，2种元素进行共同掺杂时对应的TiO2光催化剂降解能力最大。     

模拟可见光下掺杂TiO_2对甲醛溶液光催化降解

模拟自然条件下的可见光,以甲醛的光催化降解为探针反应,评价了通过溶胶-凝胶法分别制备的8种（银Ag、铜Cu、铁Fe、钨W、铈Ce、镧La、硫S、氯Cl）掺杂TiO2纳米晶体的光催化活性及对甲醛水溶液的去除效果。用X射线衍射、激光粒度分析和紫外-可见分光光谱表征了掺杂纳米TiO2的微晶尺寸、晶体结构与光学性能。结果表明：Ce离子尽管有较大的半径但是主要还是掺杂到晶格中,Ce掺杂可以促进TiO2由非正分锐钛矿相向锐钛矿相和金红石相的转变,抑制载流子复合,使TiO2的光吸收带边发生红移且有利于对可见光的吸收,从而使Ce掺杂TiO2在模拟可见光下光催化甲醛水溶液的能力得到明显提高。     

模拟室内环境下掺杂TiO_2纳米晶体的光催化性能

采用环境测试舱模拟可见光下的室内环境,以甲醛气体的光催化降解为探针反应,评价了通过溶胶-凝胶法分别制备的8种（银Ag、铜Cu、铁Fe、钨W、铈Ce、镧La、硫S和氯C l）掺杂TiO2纳米晶体的光催化活性及对甲醛气体的去除效果。用X射线衍射、激光粒度分析和紫外-可见分光光谱表征了掺杂钠米TiO2的微晶尺寸、晶体结构与光学性能。结果表明,Cu掺杂可以提高TiO2对氧的吸附能力,减少纳米粒子表面光生电子与光生空穴的复合,使TiO2的光吸收带边发生红移且有利于对可见光的吸收,从而使Cu掺杂TiO2在模拟室内环境下光催化甲醛气体的能力得到明显提高。     

模拟室内环境下掺杂TiO2纳米晶体的光催化性能

采用环境测试舱模拟可见光下的室内环境,以甲醛气体的光催化降解为探针反应,评价了通过溶胶-凝胶法分别制备的8种(银Ag、铜Cu、铁Fe、钨W、铈Ce、镧La、硫S和氯C1)掺杂TiO2纳米晶体的光催化活性及对甲醛气体的去除效果.用X射线衍射、激光粒度分析和紫外-可见分光光谱表征了掺杂钠米TiO2的微晶尺寸、晶体结构与光学性能.结果表明,Cu掺杂可以提高TiO2对氧的吸附能力,减少纳米粒子表面光生电子与光生空穴的复合,使TiO2的光吸收带边发生红移且有利于对可见光的吸收,从而使Cu掺杂TiO2在模拟室内环境下光催化甲醛气体的能力得到明显提高.     

B,N和Ce共掺杂TiO2催化剂光催化活性研究

采用溶胶-凝胶法制备出B,N和Ce共掺杂TiO2光催化剂,并用XRD、SEM等表征了其结构特征。以酸性大红染料溶液的光催化降解为探针反应,考察了制备条件对共掺杂TiO2催化剂活性的影响。结果表明,在400℃,当B,N和Ce的原子比为1∶2∶0.1,焙烧3 h时,光催化剂活性最大,大红染料的降解率达到98%。     

B,N和Ce共掺杂TiO_2催化剂光催化活性研究

采用溶胶-凝胶法制备出B,N和Ce共掺杂TiO2光催化剂,并用XRD、SEM等表征了其结构特征。以酸性大红染料溶液的光催化降解为探针反应,考察了制备条件对共掺杂TiO2催化剂活性的影响。结果表明,在400℃,当B,N和Ce的原子比为1∶2∶0.1,焙烧3 h时,光催化剂活性最大,大红染料的降解率达到98%。     

纳米TiO_(2-x)N_x催化剂的制备及其活性研究

以钛酸丁酯为前驱物、无水乙醇作溶剂、二乙醇胺作为抑制剂,采用溶胶-凝胶法制备TiO2溶胶,在NN3气流中直接进行热处理,制备一系列不同焙烧温度的淡黄色的掺氮纳米TiO2粉体.经XRD、UV-Vis和FTIR分析表明,实验制得的TiO2-xNx在350、400、450、500和550℃热处理3 h后仍为锐钛型;450℃保温3 h掺氮样品具有最佳的紫外-可见光响应,其吸收边红移至720 nm左右.罗丹明B的可见光降解实验及产物分析表明,掺氮样品具有良好的可见光催化活性.     

纳米TiO2-xNx催化剂的制备及其活性研究

以钛酸丁酯为前驱物、无水乙醇作溶剂、二乙醇胺作为抑制剂,采用溶胶-凝胶法制备TiO2溶胶,在NN3气流中直接进行热处理,制备一系列不同焙烧温度的淡黄色的掺氮纳米TiO2粉体。经XRD、UV-Vis和FTIR分析表明,实验制得的TiO2-xNx在350、400、450、500和550℃热处理3 h后仍为锐钛型;450℃保温3 h掺氮样品具有最佳的紫外-可见光响应,其吸收边红移至720 nm左右。罗丹明B的可见光降解实验及产物分析表明,掺氮样品具有良好的可见光催化活性。     

模拟可见光下掺杂TiO2对甲醛溶液光催化降解

模拟自然条件下的可见光，以甲醛的光催化降解为探针反应，评价了通过溶胶凝胶法分别制备的8种（银Ag、铜Cu、铁Fe、钨W、铈Ce、镧La、硫S、氯Cl）掺杂TiO₂纳米晶体的光催化活性及对甲醛水溶液的去除效果。用X射线衍射、激光粒度分析和紫外-可见分光光谱表征了掺杂纳米TiO₂的微晶尺寸、晶体结构与光学性能。结果表明：Ce离子尽管有较大的半径但是主要还是掺杂到晶格中，Ce掺杂可以促进TiO₂由非正分锐钛矿相向锐钛矿相和金红石相的转变，抑制载流子复合，使TiO₂的光吸收带边发生红移且有利于对可见光的吸收，从而使Ce掺杂TiO₂在模拟可见光下光催化甲醛水溶液的能力得到明显提高。     

Estimation of uncertainty of sampling for analysis of pesticide residues

Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.     

不同泥源对厌氧氨氧化反应器启动的影响

采用2套上流式生物膜反应器,分别接种少量厌氧氨氧化污泥和大量硝化污泥,考察其对厌氧氨氧化反应器启动的影响。污泥接种入反应器后,测得接种厌氧氨氧化污泥的反应器(R1)内MLSS为0.22 g/L,另一个反应器(R2)MLSS为2.7 g/L。与直接接种厌氧氨氧化污泥相比,R1经过72 d的运行才显现出厌氧氨氧化特性。经过114 d的培养,前者氮去除速率由0.23 kg/(m3.d)提升到5.29 kg/(m3.d),总氮去除率大于89%;R2的氮去除速率由0.01 kg/(m3.d)提升到1.1 kg/(m3.d),总氮去除率大于84.6%。说明普通污泥启动需要一个较长的筛选过程,直接接种少量的厌氧氨氧化污泥比接种普通的污泥能够更快启动厌氧氨氧化反应器。     

次氯酸钠发生器的研制

介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

造纸废水混凝处理中SFT助凝替代性研究

中小造纸厂废水处理常用PAC作混凝剂 ,PAM作助凝剂。由于PAM成本很高 ,影响了处理设备的投运率。用超细滑石粉 (SFT)替代PAM助凝 ,与混凝剂PAC配合 ,其混凝处理效果基本相当 ,但是处理成本降低 0 .10元 /m3 。由于SFT属环境无害材料 ,不会给排泥带来二次污染     

红土吸附砷对其动电电位的影响

研究了遵义红土吸附砷对其动电电位的影响 ,从砷酸根浓度和体系pH对红土动电电位影响的角度作了探讨 ,结果表明 ,砷酸根离子浓度越大 ,Zata电位下降幅度越大 ,Zata电位也越低 ;随着体系pH的升高 ,氧化铁胶体动电电位逐渐下降 ,甚至改变了表面电位的符号。由此得出了红土吸附砷属于专性吸附的结论。     

活性炭三维电极法对印染废水的处理研究

对三维电极方法处理印染废水进行了实验研究,初步探讨了活性炭三维电极法处理印染废水的机理,对影响处理效果的各种要素,如反应时间、槽电压和pH值等进行了条件实验,得出了活性炭三维电极法处理印染废水的最佳运行条件为:停留时间120-180 min,槽电压25～30 V,进水pH值6.5～7.5。结果表明,该反应器能有效地降低废水色度,有较高的COD去除效率,并能提高印染废水的可生化性。     

生物质快速热裂解主要参数对生物油产率的影响

以松木木屑为原料,在自制的小型流化床上,开展了生物质热裂解温度、生物质粒径和进料速率对生物油产率的影响实验研究.结果表明,在热裂解温度分别为450、475、500、525和550℃条件下,当热裂解温度为500℃时,生物油产率最高,平均产率达到53.33%(质量百分比).反应温度越高,炭产量越低,不可冷凝气体产量越高,气体发热值越高;粒径＜1 mm的生物质其粒径对生物油产率影响不大;生物质进料速率增加时,生物油产率增加.本研究为生物能的利用提供了新的途径.     

Evaluation of the presence of drugs of abuse in tap waters

A total of seventy samples of drinking water were tested for non-controlled and illicit drugs. Of these, 43 were from Spanish cities, 15 from seven other European countries, three from Japan and nine from seven different Latin American countries. The most frequently detected compounds were caffeine, nicotine, cotinine, cocaine and its metabolite benzoylecgonine, methadone and its metabolite EDDP. The mean concentrations of non-controlled drugs were: for caffeine 50 and 19 ng L⁻¹, in Spanish and worldwide drinking water respectively and for nicotine 13 and 19 ng L⁻¹. Illicit drugs were sparsely present and usually at ultratrace level (<1 ng L⁻¹). For example, cocaine has mean values of 0.4 (Spain) and 0.3 ng L⁻¹ (worldwide), whereas for benzoylecgonine, these mean values were 0.4 and 1.8 ng L⁻¹, respectively. Higher concentrations of benzoylecgonine were found in Latin American samples (up to 15 ng L⁻¹). No opiates were identified in any sample but the presence of methadone and EDDP was frequently detected. Total mean values for EDDP were 0.4 ng L⁻¹ (Spain) and 0.3 ng L⁻¹ (worldwide). Very few samples tested positive for amphetamines, in line with the reactivity of chlorine with these compounds. No cannabinoids, LSD, ketamine, fentanyl and PCP were detected.     

Visualisation of the complexity of EUSES

The interdependencies of parameters applied in the models of EUSES are visualised in a directed connectivity graph. The parameters (inputs, defaults, state variables, outputs) are represented by boxes (nodes) and their relations by lines (edges). The visualisation, on the one hand, clarifies the complexity of the models in EUSES and, on the other hand, creates an overview and transparency. The parameters’ relations to each other can be recognised faster, and the models can be better understood. The complexity was quantified by the number (variety), kind (substance parameter, physico-chemical parameter, concentration, other parameters), and depth (dimension) of the parameter and the number of relations (connectivity). The variety of EUSES (without the modelsSimple Treat andSimple Box whose interior structure is not documented and without the effect and risk characterisation) amounts to 466, the connectivity to 961, and the maximal dimension is 21.