利用糖蜜废水生产微生物絮凝剂及条件优化和效果实验研究

用糖蜜废水取代葡萄糖作为发酵培养基中的碳源和能源培养微生物絮凝剂产生菌Pseudomonas alcaligenesPS-25。通过单因素试验和正交试验得到该菌株产絮凝剂的最佳培养条件:糖蜜废水COD浓度5 000 mg/L、培养基初始pH值6.5、接种量5%(体积比)、温度30℃、培养时间为72 h、摇床转速160 r/min,在此条件下,PS-25所产絮凝剂对高岭土悬浊液絮凝率达96.75%,并且对多种废水都有较好的净化效果,对废水中浊度和色度的去除率分别在90%和80%以上,COD去除率在73.60%～91.10%。研究表明,用糖蜜废水培养PS-25生产微生物絮凝剂处理废水是完全可行的,从而实现废物的资源化利用。     

絮凝剂产生菌B-7的培养条件优化及生长动力学研究

从成都市土壤中筛选分离了1株具有稳定高效的微生物絮凝剂产生菌B-7。考察了碳源、氮源、温度、培养时间、pH等多种因素对絮凝剂（MBF-7）絮凝效果的影响。实验结果表明,该菌株产絮凝剂的最佳培养条件为：碳源为淀粉,氮源为硫酸铵,培养时间为72 h,初始pH为7.0,温度为30℃,对0.4%高岭土悬浊液的絮凝率达到91.3...     

一株产絮凝剂的黑曲霉的分离及培养条件优化

从活性污泥中筛选出一株产絮凝剂的霉菌,初步鉴定为黑曲霉(Aspergillus niger).其所产生的微生物絮凝剂对高岭土悬浊液具有良好的絮凝作用.通过培养条件优化,其所产生的微生物絮凝剂对高岭土悬浊液的絮凝率从85.6%提高到98.7%,实验结果表明,(1)黑曲霉孢子最佳接种量为9.33×108 个/L;(2)产絮凝剂适宜的碳源为蔗糖,氮源为尿素,用量分别为30.00、1.600 g/L;(3)最佳培养条件为:查氏液体培养基初始pH 7.0,培养温度30℃,摇床转速180 r/min,培养时间120 h;(4)在最佳培养条件下微生物絮凝剂的产量为1.805 g/L;(5)絮凝性能比较结果表明,微生物絮凝剂的絮凝性能优于传统絮凝剂.     

简单芽孢杆菌产高效微生物絮凝剂

通过从绿化植物根际土壤和污水处理厂的活性污泥中分离筛选絮凝剂产生菌,得到一株稳定高效的微生物絮凝剂产生菌PS1,根据形态学特征、生理生化实验以及16S rDNA序列分析将其鉴定为简单芽孢杆菌(Bacillus simplex)。对菌株PS1产生絮凝剂的最佳培养时间、絮凝活性分布以及pH、CaCl2、絮凝剂投量对絮凝效果的影响进行了研究,并考察了其对实际废水的絮凝效果。结果表明,菌株PS1产絮凝剂的最佳培养时间为36 h,产生的絮凝活性物质全部存在于发酵液离心后的上清液中;当pH为7.0～8.5、CaC12投量为0.25～0.35 g/L、发酵液投加量的体积分数为1.5%～2.5%时,菌株PS1发酵液对4 g/L的高岭土悬浊液的絮凝效果最佳,絮凝率达到97%。菌株PS1所产絮凝剂对城市污水、啤酒废水、淀粉废水、医院废水的絮凝率可达90%以上。     

微生物絮凝剂产生菌KJ-10的絮凝性能及絮凝成分分析

从炼厂含油污泥中分离筛选出一株高效微生物絮凝剂产生菌KJ-10,初步鉴定为芽孢杆菌.为进一步探讨该菌株的絮凝性能和絮凝成分,实验考察了该菌株对高岭土悬液和含油废水的处理效果,研究了所产絮凝剂的热稳定性,并通过紫外光谱、红外光谱、GC-MS技术及多糖含量测定等途径对其絮凝成分进行了深入分析.结果表明,该菌株对高岭土悬液的...     

微生物絮凝剂产生菌的筛选及其培养条件优化的研究

采用常规的细菌分离纯化方法从土壤中分离出絮凝剂产生菌菌株,经过驯化培养后,以发酵液对高岭土混悬液的絮凝效果为指标,筛选出2株高效絮凝剂产生菌.采用单因素试验方法和正交试验设计方法,分析了影响絮凝效果的主要因素,对2个菌株的最佳培养条件进行了优化研究.结果表明:菌株S3产絮凝剂的最佳培养条件是碳源为葡萄糖(20g/L),氮源为酵母膏(2.5 g/L),培养温度为28℃,初始pH值为8,通气量为50 r/min;菌株S21产絮凝剂的最佳培养条件是乙醇(15 g/L),氮源为复合氮源(酵母膏 脲 硫酸铵)(1.6 g/L),培养温度为28℃,初始pH值为9,通气量为200r/min.     

微生物絮凝剂的制备及其絮凝活性

从土壤和活性污泥中筛选获得性能稳定、对高岭土悬浮液的絮凝率达75%以上的菌株20株,其中编号为Ⅰ-18的菌株培养液对高岭土悬浮液的絮凝率达85%以上,经鉴定为球形芽孢杆菌Bacillus sphaericus.实验表明,该菌株以质量分数为2%的蔗糖为碳源,以质量分数均为0.15%的蛋白胨与尿素组合为氮源;生长与分泌絮凝剂的合适温度为30℃,适宜的pH为7.0,最佳培养时间为80 h.利用该微生物絮凝剂处理水性油墨废水效果明显,15 min浊度去除率达98.7%.     

微生物絮凝剂产生菌的培养条件研究

从活性污泥中分离筛选到1株高效絮凝剂产生菌E 9,初步鉴定其为大肠杆菌。首次发现大肠杆菌能产生微生物絮凝剂。该菌产生絮凝剂的适宜培养条件为:乙醇为碳源,大豆粉为氮源,初始pH值为6. 5~7 .2、温度为30℃。絮凝实验结果表明,该菌产絮凝剂对高岭土悬浊液的絮凝率可达97% ~99. 5%,而絮凝剂投加量仅为通用发酵培养基的1 /15,絮凝效果优于聚丙烯酰胺等常用絮凝剂。     

微生物絮凝剂的发酵培养和诱变研究

对粪产碱杆菌B-20进行发酵培养,观察菌株生长与絮凝剂积累、絮凝性、糖类物质消耗和氧浓度之间的关系,发现菌株的生长与絮凝剂的积累呈正相关,并且发酵培养过程中pH保持在7.2～7.9.通过热诱变获得能够稳定传代的B-2022突变菌株,比较了在不同pH、CaCl2添加量、菌液添加量以及不同温度条件下,其与原菌株B-20的发酵混合液的絮凝率差异,发现热诱变菌株B-2022具有更好的絮凝性能,尤其对pH的适应性较强,最优的絮凝条件为pH=9.0、100 mL高岭土悬浮液中1%(质量分数)CaCl2和发酵混合液添加量都为4 mL.进一步将热诱变菌株B-2022紫外诱变45 s,得到紫外诱变菌株B-2022c,其最佳絮凝率可达94.3%,比原菌株B-20和热诱变菌株B-2022的最佳絮凝率分别提高了2.4%和1.7%.通过化学法、紫外分光光度法和红外分光光度法测得絮凝剂的主要化学成分为糖类物质.     

微生物絮凝剂用于河道疏浚底泥快速脱水的研究

河道疏浚底泥含水率高、体积庞大,不便于储存、运输和资源化利用。首先需要对其进行减量化,使其快速脱水。通过筛选获得一株高效的微生物絮凝剂产生菌F22,通过试验获得其最佳培养条件:葡萄糖为碳源,酵母膏和尿素为氮源,培养时间为60h,培养温度为32℃。将F22菌株所产絮凝剂应用于底泥脱水,试验结果表明,当底泥泥浆(含水率为93%)体积为100mL时,絮凝体系最佳pH为8～10,助凝剂CaCl2最佳投加量为4～5mL,F22菌株发酵液最佳投加量为3mL;絮体在1min左右大部分沉降至底部,F22菌株所产絮凝剂能够使底泥快速脱水。F22菌株所产絮凝剂在絮凝过程中起作用的是糖类物质,其通过氢键结合力产生絮凝作用。     

Estimation of uncertainty of sampling for analysis of pesticide residues

Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.     

次氯酸钠发生器的研制

介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠     

不同泥源对厌氧氨氧化反应器启动的影响

采用2套上流式生物膜反应器,分别接种少量厌氧氨氧化污泥和大量硝化污泥,考察其对厌氧氨氧化反应器启动的影响。污泥接种入反应器后,测得接种厌氧氨氧化污泥的反应器(R1)内MLSS为0.22 g/L,另一个反应器(R2)MLSS为2.7 g/L。与直接接种厌氧氨氧化污泥相比,R1经过72 d的运行才显现出厌氧氨氧化特性。经过114 d的培养,前者氮去除速率由0.23 kg/(m3.d)提升到5.29 kg/(m3.d),总氮去除率大于89%;R2的氮去除速率由0.01 kg/(m3.d)提升到1.1 kg/(m3.d),总氮去除率大于84.6%。说明普通污泥启动需要一个较长的筛选过程,直接接种少量的厌氧氨氧化污泥比接种普通的污泥能够更快启动厌氧氨氧化反应器。     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

造纸废水混凝处理中SFT助凝替代性研究

中小造纸厂废水处理常用PAC作混凝剂 ,PAM作助凝剂。由于PAM成本很高 ,影响了处理设备的投运率。用超细滑石粉 (SFT)替代PAM助凝 ,与混凝剂PAC配合 ,其混凝处理效果基本相当 ,但是处理成本降低 0 .10元 /m3 。由于SFT属环境无害材料 ,不会给排泥带来二次污染     

活性炭三维电极法对印染废水的处理研究

对三维电极方法处理印染废水进行了实验研究,初步探讨了活性炭三维电极法处理印染废水的机理,对影响处理效果的各种要素,如反应时间、槽电压和pH值等进行了条件实验,得出了活性炭三维电极法处理印染废水的最佳运行条件为:停留时间120-180 min,槽电压25～30 V,进水pH值6.5～7.5。结果表明,该反应器能有效地降低废水色度,有较高的COD去除效率,并能提高印染废水的可生化性。     

红土吸附砷对其动电电位的影响

研究了遵义红土吸附砷对其动电电位的影响 ,从砷酸根浓度和体系pH对红土动电电位影响的角度作了探讨 ,结果表明 ,砷酸根离子浓度越大 ,Zata电位下降幅度越大 ,Zata电位也越低 ;随着体系pH的升高 ,氧化铁胶体动电电位逐渐下降 ,甚至改变了表面电位的符号。由此得出了红土吸附砷属于专性吸附的结论。     

生物质快速热裂解主要参数对生物油产率的影响

以松木木屑为原料,在自制的小型流化床上,开展了生物质热裂解温度、生物质粒径和进料速率对生物油产率的影响实验研究.结果表明,在热裂解温度分别为450、475、500、525和550℃条件下,当热裂解温度为500℃时,生物油产率最高,平均产率达到53.33%(质量百分比).反应温度越高,炭产量越低,不可冷凝气体产量越高,气体发热值越高;粒径＜1 mm的生物质其粒径对生物油产率影响不大;生物质进料速率增加时,生物油产率增加.本研究为生物能的利用提供了新的途径.     

Evaluation of the presence of drugs of abuse in tap waters

A total of seventy samples of drinking water were tested for non-controlled and illicit drugs. Of these, 43 were from Spanish cities, 15 from seven other European countries, three from Japan and nine from seven different Latin American countries. The most frequently detected compounds were caffeine, nicotine, cotinine, cocaine and its metabolite benzoylecgonine, methadone and its metabolite EDDP. The mean concentrations of non-controlled drugs were: for caffeine 50 and 19 ng L⁻¹, in Spanish and worldwide drinking water respectively and for nicotine 13 and 19 ng L⁻¹. Illicit drugs were sparsely present and usually at ultratrace level (<1 ng L⁻¹). For example, cocaine has mean values of 0.4 (Spain) and 0.3 ng L⁻¹ (worldwide), whereas for benzoylecgonine, these mean values were 0.4 and 1.8 ng L⁻¹, respectively. Higher concentrations of benzoylecgonine were found in Latin American samples (up to 15 ng L⁻¹). No opiates were identified in any sample but the presence of methadone and EDDP was frequently detected. Total mean values for EDDP were 0.4 ng L⁻¹ (Spain) and 0.3 ng L⁻¹ (worldwide). Very few samples tested positive for amphetamines, in line with the reactivity of chlorine with these compounds. No cannabinoids, LSD, ketamine, fentanyl and PCP were detected.     

Visualisation of the complexity of EUSES

The interdependencies of parameters applied in the models of EUSES are visualised in a directed connectivity graph. The parameters (inputs, defaults, state variables, outputs) are represented by boxes (nodes) and their relations by lines (edges). The visualisation, on the one hand, clarifies the complexity of the models in EUSES and, on the other hand, creates an overview and transparency. The parameters’ relations to each other can be recognised faster, and the models can be better understood. The complexity was quantified by the number (variety), kind (substance parameter, physico-chemical parameter, concentration, other parameters), and depth (dimension) of the parameter and the number of relations (connectivity). The variety of EUSES (without the modelsSimple Treat andSimple Box whose interior structure is not documented and without the effect and risk characterisation) amounts to 466, the connectivity to 961, and the maximal dimension is 21.