Influence of clay minerals on the reduction of Cr6+ by citric acid

The influence of clay minerals on the reduction of Cr6+ by citric acid was investigated at pH values 4.0, 4.5 and 5.0 at 25 degrees C. The results indicate that montmorillonite and illite greatly accelerate the reduction reactions at pH 4.0 and 4.5, but their effects are dramatically reduced at pH 5.0. The role of clay minerals in accelerating the reactions is in the order: illite>montmorillonite>kaolinite, which has a positive correlation with the amount of Mn2+ adsorbed on the surfaces of these minerals. With light, Fe(3+) also significantly increases reaction rates. Ethylenediaminetetraacetic acid (EDTA) greatly suppresses the acceleration of the reduction reactions by these minerals, indicating that EDTA competes with citric acid for Mn2+. Thus, the formation of complexes between Mn(2+) and citric acid could be a prerequisite for the acceleration of the reductions of Cr6+ by clay minerals. In addition, there is no relationship between the specific surface area of clay minerals and the reduction rate of Cr6+ by citric acid.     

Surface charge and adsorption from water onto quartz sand of humic acid

The surface charge of humic acid under different conditions of ionic strength, pH, and the presence of various cationic ions (Cu(2+), Zn(2+), Ba(2+), and Ca(2+)) was determined by a titration method using a cationic polyelectrolyte as titrant. Adsorption isotherms in batch experiments of the polymer from water onto quartz sand were determined at 20 degrees C, 40 degrees C, and 60 degrees C and under different conditions of ionic strength, pH, and the presence of various cationic ions (Cu(2+), Zn(2+), Ba(2+), and Ca(2+)). The data indicate significant decrease of humic acid surface charge by decreasing the pH value from 10.0 to 4.1. Similar decrease of humic acid surface charge was observed by increasing either the ionic strength or the affinity of the divalent cation toward the humic acid. At ambient temperature the adsorption of humic acid on the quartz sand seems to be controlled mainly by electrical interaction between the organic particle and the solid substrate. A correlation is found between the surface charge and the adsorbed amount of the polymer, the adsorbed amount increases when the surface charge of humic acid decreases. The increase of the adsorbed amount with the temperature suggests that adsorption process is endothermic.     

Adsorption of arsenic (V) on kaolinite and on kaolinite-humic acid complexes. Role of humic acid nitrogen groups

In order to investigate the influence of organic matter on arsenic retention, we used batch experiments at pH 7 to determine the adsorption of As(V) on three different solids: a crude, purified, Ca-exchanged kaolinite and two kaolinites coated with humic acids (HAs) having different nitrogen contents. We first examined the adsorption of each HA onto kaolinite, and then used the HA-kaolinite complexes to study As(V) adsorption. The results clearly show an influence of the HA coating on As adsorption. For example, with low initial As concentrations the solid/liquid partition coefficient (R(d)) for both HA complexes is greater than that for the crude kaolinite. We found that increasing the initial As concentrations decreased the R(d) values of the HA-coated kaolinites until finally they were the same as the crude kaolinite R(d) values. This suggests that adsorption occurs first on the HA sites and then, once the HA sites are saturated, on the remaining kaolinite sites. We also noted that the more reactive HA-kaolinite complex was the one with the highest N/C ratio. Comparing the amount of amine groups in the HA-kaolinite complexes with the total amount of adsorbed As indicates that the HA amine groups, due to their positive charge at pH 7, play a key role in the adsorption of As onto organic matter.     

Adsorption of molybdate and tetrathiomolybdate onto pyrite and goethite: effect of pH and competitive anions

The adsorption of two major molybdenum (Mo) species, molybdate (MoO4(2-)) and tetrathiomolybdate (MoS4(2-)) onto two main iron minerals pyrite (FeS2) and goethite (FeOOH) is addressed to elucidate the possible mechanisms of molybdenum immobilization in anoxic sediments. Suspensions of MoS4(2-) (or MoO4(2-)) and goethite (or pyrite) in 0.1M NaCl solution were equilibrated under anoxic conditions at 25 degrees C in the pH range from 3 to 10. The competitive effects of sulfate, phosphate, and silicate on the adsorption of MoO4(2-) and MoS4(2-) by pyrite and goethite are also addressed. Adsorption of MoO4(2-) and MoS4(2-) on pyrite and goethite is in general well described by a Langmuir model at low pH; the extent of sorption is a function of pH and the surface loading. Maximum sorption is observed in the acidic pH range (pH<5) at low surface loading. The adsorption of molybdenum (micromol g(-1)) depends upon Mo species and on the type of iron mineral following the order: MoS4(2-)-goethite > MoO4(2-)-goethite > MoS4(2-)-pyrite > MoO4(2-)-pyrite. Phosphate appears to compete strongly with MoO4(2-) and MoS4(2-) for the sorption sites of pyrite and goethite. The strength of the phosphate competitive effect follows the sequence of MoO4(2-)-goethite approximately = MoO4(2-)-pyrite > MoS4(2-)-pyrite > MoS4(2-)-goethite. Silicate and sulfate have a negligible effect on the sorption of MoO4(2-) and MoS4(2-). The preferred adsorption by iron mineral of MoS4(2-), as well as its behavior in the presence of competitive anions suggests that tetrathiomolybdate species may be an ultimate reservoir and may control Mo enrichment in the sediments.     

Montmorillonite-Cu(II)/Fe(III) oxides magnetic material as adsorbent for removal of humic acid and its thermal regeneration

In this work, the adsorption features of montmorillonite and the magnetic properties of Cu(II)/Fe(III) oxides were combined in a material to produce magnetic adsorbent, which can be separated from the medium by a simple magnetic process after adsorption. The magnetic material is effective for the removal of humic acid. At pH 6.1, 96% removal was observed from 4.4 mg l(-1) humic acid solution containing 0.02 M NaCl. The adsorption is pH and ionic strength dependent. Adsorption is favored at lower pH values and dissolved NaCl can enhance the adsorption. The adsorption mechanism of humic acid to the magnetic material was suggested to be the ligand exchange reaction between carboxylic groups of humic acid molecules and the magnetic material surface. The magnetic material can be thermally regenerated. The temperature and time required to achieve good regeneration efficiency were determined to be 300 degrees C and 3 h, respectively. The regenerated adsorbent is still magnetic and approximately has as high specific saturation magnetization and good adsorption capacities as the as-prepared adsorbent.     

Sorption of U(VI) onto an artificial humic substance-kaolinite-associate

An artificial humic substance-kaolinite-associate (HSKA) was synthesized as a model substance for natural clays containing organic matter in clay formations, soils, and sediments. The U(VI) sorption onto this model substance was studied in batch experiments as a function of pH and compared to the U(VI) sorption onto kaolinite in absence and presence of separately added humic acid (HA). The HSKA has a TOC content of 4.9 mg g(-1). It was found that the humic matter associated with kaolinite exhibits an immobilizing as well as an mobilizing effect on U(VI). Between pH 3 and 5, humic matter causes an increase of the U(VI) sorption onto kaolinite, whereas at pH above 5 the release of humic matter from the associate into the solution and the formation of dissolved uranyl humate complexes reduces the U(VI) sorption. The U(VI) sorption onto the synthetic HSKA differs from that of U(VI) in the system U(VI)/HA/kaolinite with comparable amounts of separately added HA. Separately added HA causes a stronger mobilizing effect on U(VI) than humic matter present in HSKA. This can be attributed to structural and functional dissimilarities of the humic substances.     

Effects of pH, organic acids, and inorganic ions on lead desorption from soils

The desorption characteristics of lead in two variable charge soils (one developed from Arenaceous rock (RAR) and the other derived from Quaternary red earths (REQ)) were studied, and the effects of pH value, organic acid, and competitive ions were examined. Desorption of Pb(2+) decreased from nearly 100.0 to 20.0% within pH 1.0-4.0 in both soils, and then the decrease diminished at pH > 4.0. Organic ligands at relatively low concentrations (< or =10(-3) mol L(-1)) slightly inhibited Pb(2+) desorption, but enhanced Pb(2+) desorption at higher concentrations. In this study, citric acid or acetic acid at higher concentrations (>10(-3) mol L(-1)) had the greatest improvement of Pb(2+) desorption, followed by malic acid; and the smallest was oxalic acid. Desorption of the adsorbed Pb(2+) increased greatly with increasing concentrations of added Cu(2+) or Zn(2+). Applied Cu(2+) increased Pb(2+) desorption more than Zn(2+) at the same loading.     

凹凸棒土对腐殖酸的低温吸附性能研究

首次研究凹凸棒土对饮用水中腐殖酸的低温吸附性能,考察5℃条件下,吸附时间与腐殖酸初始浓度、吸附剂投加量、pH对凹凸棒土吸附腐殖酸的影响,确定吸附剂的吸附等温线、吸附动力学和热力学等相关理论参数,研究凹凸棒土对腐殖酸的吸附性能与机理。结果表明,江苏盱眙凹凸棒土在温度5℃、pH=4、水中腐殖酸初始浓度为5 mg/L,投加量为15 g/L的条件下,吸附180 min后对腐殖酸的去除率可达97.26%。凹凸棒土对腐殖酸的吸附符合二级吸附动力学方程与Freundlich吸附等温式,吸附过程由孔隙内扩散过程控制,吸附为自发的吸热过程,包括物理吸附与化学吸附。根据Fre-undlich吸附等温式拟合计算,5℃、pH=7时理论最大吸附量为9 mg/g,说明凹凸棒土对于低温饮用水中腐殖酸具有良好的吸附效果。     

Removal of Pb(II), Cd(II), Cu(II), and Zn(II) by hematite nanoparticles: effect of sorbent concentration, pH, temperature, and exhaustion

Nanoparticles offer the potential to improve environmental treatment technologies due to their unique properties. Adsorption of metal ions (Pb(II), Cd(II), Cu(II), Zn(II)) to nanohematite was examined as a function of sorbent concentration, pH, temperature, and exhaustion. Adsorption experiments were conducted with 0.05, 0.1, and 0.5 g/L nanoparticles in a pH 8 solution and in spiked San Antonio tap water. The adsorption data showed the ability of nanohematite to remove Pb, Cd, Cu, and Zn species from solution with adsorption increasing as the nanoparticle concentration increased. At 0.5 g/L nanohematite, 100 % Pb species adsorbed, 94 % Cd species adsorbed, 89 % Cu species adsorbed and 100 % Zn species adsorbed. Adsorption kinetics for all metals tested was described by a pseudo second-order rate equation with lead having the fastest rate of adsorption. The effect of temperature on adsorption showed that Pb(II), Cu(II), and Cd(II) underwent an endothermic reaction, while Zn(II) underwent an exothermic reaction. The nanoparticles were able to simultaneously remove multiple metals species (Zn, Cd, Pb, and Cu) from both a pH 8 solution and spiked San Antonio tap water. Exhaustion experiments showed that at pH 8, exhaustion did not occur for the nanoparticles but adsorption does decrease for Cd, Cu, and Zn species but not Pb species. The strong adsorption coupled with the ability to simultaneously remove multiple metal ions offers a potential remediation method for the removal of metals from water.     

Binding affinity of proanthocyanidin from waste Pinus radiata bark onto proline-rich bovine achilles tendon collagen type I

Binding affinity of proanthocyanidin (PA) purified from Pinus radiata bark waste onto bovine Achilles tendon collagen (type I) was studied. Adsorption of PA onto the collagen was optimized by examining pH, contact time and temperature. The adsorption was pH-dependent. The maximum adsorption capacity (Q(0)) of PA on collagen was found to be 211 mg g(-1) using the Langmuir isotherm. Comparison between two adsorbents also showed that collagen had higher adsorptivity of approximately 20% more than PVPP (polyvinyl polypyrrolidone). The high affinity between PA and collagen was further confirmed in solvent solubility experiments. The observed solvent resistance was thought to be mainly due to a hydrophobic stacking mechanism reinforced by hydrogen bonding. FT-IR spectra clearly indicated the presence of PA adsorbed on collagen. The results have interesting implications that PA can be a good protective agent for collagen against collagenase and other enzymes.     

Effects of EDTA and low molecular weight organic acids on soil solution properties of a heavy metal polluted soil

A pot experiment was conducted to study the effects of EDTA and low molecular weight organic acids (LMWOA) on the pH, total organic carbon (TOC) and heavy metals in the soil solution in the rhizosphere of Brassica juncea grown in a paddy soil contaminated with Cu, Zn, Pb and Cd. The results show that EDTA and LMWOA have no effect on the soil solution pH. EDTA addition significantly increased the TOC concentrations in the soil solution. The TOC concentrations in treatments with EDTA were significantly higher than those in treatments with LMWOA. Adding 3 mmol kg(-1) EDTA to the soil markedly increased the total concentrations of Cu, Zn, Pb and Cd in the soil solution. Compared to EDTA, LMWOA had a very small effect on the metal concentrations. Total concentrations in the soil solution followed the sequence: EDTA > citric acid (CA) approximately oxalic acid (OA) approximately malic acid (MA) for Cu and Pb; EDTA > MA > CA approximately OA for Zn; and EDTA > MA > CA > OA for Cd. The labile concentrations of Cu, Zn, Pb and Cd showed similar trends to the total concentrations.     

Effective uptake of decontaminating agent (citric acid) from aqueous solution by mesoporous and microporous materials: an adsorption process

The presence of citric acid in decontamination waste can cause complexation of the radioactive cations resulting in interferences in their removal by various treatment processes such as chemical precipitation, ion-exchange, etc., which are employed for the removal of radioactivity and may cause potential danger to the environment. Mesoporous Al-MCM-41 (Si/Al=30, 51, 72 and 97) and Si-MCM-41 molecular sieves were synthesized hydrothermally and characterized by XRD, BET (surface area) and FT-IR to evaluate the removal of citric acid through an adsorption process. Adsorption of citric acid over Al-MCM-41 shows the applicability of Freundlich and Langmuir isotherm and follows first order kinetics. The effects of contact time, concentration of citric acid, adsorbents (various Si/Al ratios of Al-MCM-41, Si-MCM-41, Hbeta zeolite and commercial carbon) and pH have been investigated. It has been found that the amount of citric acid adsorbed per unit gram of catalyst followed the order Al-MCM-41 (Si/Al=30)>Al-MCM-41 (Si/Al=51)>activated charcoal>Al-MCM-41 (Si/Al=72)>Al-MCM-41 (Si/Al=97)>Si-MCM-41>Hbeta zeolite.     

Sorption of Pesticides on Kaolinite and Montmorillonite as a Function of Hydrophilicity

Pesticides and other organic species are adsorbed by soil via different mechanisms, with bond strengths that depend on the properties of both the soil and the pesticide. Since the clay fraction in soil is a preferential sorbent for organic matter, reference kaolinite and montmorillonite are useful models for studying the mechanism and the strength of sorption. This paper presents the results of batch experiments to investigate the interactions of kaolinite KGa-1 and montmorillonite SWy-1 with the following pesticides and organic species resulting from the natural degradation of pesticides in the environment: atrazine (1-chloro-3-ethylamino-5-isopropylamino-2,4,6-triazine), simazine (1-chloro-3,5-bisethylamino-2,4,6-triazine), diuron [1,1-dimethyl-3-(3,4-dichlorophenyl)urea], aniline, 4-chlorophenol, 2,4-dichlorophenol, and 2,4,6-trichlorophenol. Each of these chemicals has different hydrophilicity. Systems containing 2.0 g of clay were put in contact with 100.0 mL of solutions of the pesticides at known concentration ranging from 1.0 to 5.0 mg/L, and the amount of solute adsorbed was evaluated through RP-HPLC analysis of the pesticide still present in the aqueous suspension. To test for electrostatic interactions between the clay surface and the pesticides, potentiometric titration was used to determine the permanent surface charge of clays. Experiments were performed at different pH values. The results indicate that, for the chemicals studied, neutral molecules are preferentially retained relative to ionized ones, and that montmorillonite is a more effective sorbent than kaolinite.     

The use of maize and poplar in chelant-enhanced phytoextraction of lead from contaminated agricultural soils

Chelant-enhanced phytoextraction of heavy metals is an emerging technological approach for a non-destructive remediation of contaminated soils. The main objectives of this study were (i) to assess the extraction efficiency of two different synthetic chelating agents (ethylenediaminetetraacetic acid (EDTA) and ethylenediaminedisuccinic acid (EDDS)) for desorbing Pb from two contaminated agricultural soils originating from a mining and smelting district and (ii) to assess the phytoextraction efficiency of maize (Zea mays) and poplar (Populus sp.) after EDTA application. EDTA was more efficient than EDDS in desorbing and complexing Pb from both soils, removing as much as 60% of Pb. Maize exhibited better results than poplar when extracting Pb from the more acidic (pH approximately 4) and more contaminated (up to 1360 mg Pb kg(-1)) agricultural soil originating from the smelting area. On the other hand, poplars proved to be more efficient when grown on the near-neutral (pH approximately 6) and less contaminated (up to 200 mg Pb kg(-1)) agricultural soil originating from the mining area. Furthermore, the addition of EDTA led to a significant increase of Pb content especially in poplar leaves, proving a strong translocation rate within the poplar plants.     

Removal of As(III) and As(V) using iron-rich sludge produced from coal mine drainage treatment plant

To test the feasibility of the reuse of iron-rich sludge (IRS) produced from a coal mine drainage treatment plant for removing As(III) and As(V) from aqueous solutions, we investigated various parameters, such as contact time, pH, initial As concentration, and competing ions, based on the IRS characterization. The IRS consisted of goethite and calcite, and had large surface area and small particles. According to energy dispersive X-ray spectroscopy mapping results, As was mainly removed by adsorption onto iron oxides. The adsorption kinetic studies showed that nearly 70 % adsorption of As was achieved within 1 h, and the pseudo-second-order model well explained As sorption on the IRS. The adsorption isotherm results agreed with the Freundlich isotherm model, and the maximum adsorption capacities for As(III) and As(V) were 66.9 and 21.5 mg/g, respectively, at 293 K. In addition, the adsorption showed the endothermic character. At high pH or in the presence of phosphate, the adsorption of As was decreased. When the desorption experiment was conducted to reuse the IRS, 85 % As was desorbed with 1.0 N NaOH. In the column experiment, adsorbed As in real acid mine drainage was 43 % of the maximum adsorbed amount of As in the batch test. These results suggested that the IRS is an effective adsorbent for As and can be effectively applied for the removal of As in water and wastewater.     

Sorption of pesticides on kaolinite and montmorillonite as a function of hydrophilicity

Pesticides and other organic species are adsorbed by soil via different mechanisms, with bond strengths that depend on the properties of both the soil and the pesticide. Since the clay fraction in soil is a preferential sorbent for organic matter, reference kaolinite and montmorillonite are useful models for studying the mechanism and the strength of sorption. This paper presents the results of batch experiments to investigate the interactions of kaolinite KGa-1 and montmorillonite SWy-1 with the following pesticides and organic species resulting from the natural degradation of pesticides in the environment: atrazine (1-chloro-3-ethylamino-5-isopropylamino-2,4,6-triazine), simazine (1-chloro-3,5-bisethylamino-2,4,6-triazine), diuron [1,1-dimethyl-3-(3,4-dichlorophenyl)urea], aniline, 4-chlorophenol, 2,4-dichlorophenol, and 2,4,6-trichlorophenol. Each of these chemicals has different hydrophilicity. Systems containing 2.0 g of clay were put in contact with 100.0 mL of solutions of the pesticides at known concentration ranging from 1.0 to 5.0 mg/L, and the amount of solute adsorbed was evaluated through RP-HPLC analysis of the pesticide still present in the aqueous suspension. To test for electrostatic interactions between the clay surface and the pesticides, potentiometric titration was used to determine the permanent surface charge of clays. Experiments were performed at different pH values. The results indicate that, for the chemicals studied, neutral molecules are preferentially retained relative to ionized ones, and that montmorillonite is a more effective sorbent than kaolinite.     

Desorption of cadmium from goethite: effects of pH, temperature and aging

Cadmium is perhaps environmentally the most significant heavy metal in soils. Bioavailability, remobilization and fate of Cd entering in soils are usually controlled by adsorption-desorption reactions on Fe oxides. Adsorption of Cd on soil colloids including Fe oxides has been extensively studied but Cd desorption from such soil minerals has received relatively little attention. Some factors that affect Cd adsorption on goethite include pH, temperature, aging, type of index cations, Cd concentrations, solution ionic strength and presence of organic and inorganic ions. This research was conducted to study the influence of pH, temperature and aging on Cd desorption from goethite. Batch experiments were conducted to evaluate Cd desorption from goethite with 0.01 M Ca(NO3)2. In these experiments Cd desorption was observed at 20, 40 and 70 degrees C in combination with aging for 16 h, 30, 90 and 180 d from goethite that adsorbed Cd from solutions containing initial Cd concentrations of 20, 80 and 180 microM. Following the adsorption step Cd desorption was measured by 15 successive desorptions after aging at various temperatures. At the lowest amount of initially adsorbed Cd and equilibrium pH 5.5, cumulative Cd desorption decreased from 71% to 17% with aging from 16 h to 180 d and the corresponding decrease at equilibrium pH 6.0 was from 32% to 3%. There was a substantial decrease in Cd desorption with increasing equilibration temperature. For example, in goethite with the lowest amount of initial adsorption at equilibrium pH 5.5, cumulative Cd desorption decreased from 71% to 31% with increase in temperature from 20 to 70 degrees C, even after 16 h. Dissolution of Cd adsorbed goethite in 1M HCl, after 15 successive desorptions with 0.01 M Ca(NO3)2, indicated that approximately 60% of the Cd was surface adsorbed. Overall, dissolution kinetics data revealed that 23% to 88% Cd could not be desorbed, which could possibly be diffused into the cracks and got entrapped in goethite crystals. At elevated temperature increased equilibrium solution pH favoured the formation of CaCO3 and CdCO3 which reasonably decreased Cd desorption. Cadmium speciation showed the formation of calcite and otavite minerals at 40 and 70 degrees C due to increase in pH (>9.5) during aging. X-ray diffraction analysis (XRD) of these samples also revealed the formation of CaCO3 at elevated temperatures with aging. While mechanisms such as Cd diffusion and/or entrapment into fissures and cracks in goethite structure with increase in temperature and aging are possible.     

Investigating the affinities and persistence of VX nerve agent in environmental matrices

Laboratory experiments were conducted to determine environmental variables that affect the affinities and persistence of the nerve agent O-ethyl S-(2-diisopropylaminoethyl) methylphosphonothiolate (VX) at dilute concentrations in environmental matrices. Quantitative analyses of VX and its degradation products were performed using LC-MS. Batch hydrolysis experiments demonstrated an increasing hydrolysis rate as pH increased, as shown in previous studies, but also indicated that dissolved aqueous constituents can cause significant differences in the absolute hydrolysis rate. Adsorption isotherms from batch aqueous experiments revealed that VX has a high affinity for hydrophobic organics, a moderate affinity for montmorillonite clay, and a very low affinity for an iron-oxyhydroxide soil mineral, goethite. The adsorption on goethite was increased with the presence of dissolved organic matter in solution. VX degraded rapidly when dried onto goethite, when specific adsorption was forced. No enhanced degradation occurred with goethite in small amounts of water. These results suggest that aqueous conditions have important controls on VX adsorption and degradation in the environment and a more mechanistic understanding of these controls is needed in order to enable accurate predictions of its long-term fate and persistence.