Leaching of copper and zinc from spent antifouling paint particles

Leaching of Cu and Zn from a composite of spent antifouling paint particles, containing about 300 mg g⁻¹ and 110 mg g⁻¹ of the respective metals, was studied in batch experiments. For a given set of simulated environmental conditions, release of Cu was independent of paint particle concentration due to attainment of pseudo-saturation, but Zn was less constrained by solubility effects and release increased with increasing particle concentration. Leaching of Cu increased but Zn decreased with increasing salinity, consistent with mechanisms governing the dissolution of Cu₂O in the presence of chloride and Zn acrylates in the presence of seawater cations. Because of complex reaction kinetics and the presence of calcium carbonate in the paint matrix, metal leaching appeared to be greater at 4 °C than 19 °C under many conditions. These findings have important environmental and biological implications regarding the deliberate or inadvertent disposal of antifouling paint residues.     

Leaching of hydrophobic Cu and Zn from discarded marine antifouling paint residues: Evidence for transchelation of metal pyrithiones

Leaching of Cu and Zn from a composite of discarded antifouling paint residues ([Cu] = 288 mg g⁻¹; [Zn] = 96 mg g⁻¹) into natural sea water has been studied over a period of 75 h. Total Cu and Zn were released according to a pseudo first-order reaction, with rate constants on the order of 0.3 and 2.5 (mg L⁻¹)⁻¹ h⁻¹, respectively, and final concentrations equivalent to the dissolution of about 8 and 2% of respective concentrations in the composite. Time-distributions of hydrophobic metals, determined by solid phase extraction-methanol elution, were more complex. Net release of hydrophobic Cu was greater in the absence of light than under a sequence of light-dark cycles; however, hydrophobic Zn release was not detected under the former conditions but contributed up to 50% of total aqueous Zn when light was present. These observations are interpreted in terms of the relative thermodynamic and photolytic stabilities of biocidal pyrithione complexes.     

Toxicity of tire wear particle leachate to the marine macroalga, Ulva lactuca

Tire wear particles filed from the treads of end-of-life vehicle tires have been added to sea water to examine the release of Zn and the toxicity of the resulting leachate and dilutions thereof to the marine macroalga, Ulva lactuca. Zinc release appeared to be diffusion-controlled, with a conditional rate constant of 5.4 μg[L(h)^1/2]⁻¹, and about 1.6% of total Zn was released after 120 h incubation. Exposure to increasing concentrations of leachate resulted in a non-linear reduction in the efficiency of photochemical energy conversion of U. lactuca and, with the exception of the undiluted leachate, increasing accumulation of Zn. Phototoxicity was significantly lower on exposure to equivalent concentrations of Zn added as Zn(NO₃)₂, suggesting that organic components of leachate are largely responsible for the overall toxicity to the alga. Given the ubiquity and abundance of TWP in urban coastal sediments, the generation, biogeochemistry and toxicity of tire leachate in the marine setting merit further attention.     

Processing of antifouling paint particles by Mytilus edulis

Particles of spent antifouling paint collected from a marine boatyard were ground and subsequently administered to the filter-feeding bivalve, Mytilus edulis, maintained in static aquaria. Concentrations of Cu and Zn were measured in seawater throughout a 16 h feeding phase and a 24 h depuration phase, in rejected and egested particles collected during the respective phases, and in the organisms themselves at the end of the experiments. Concentrations and distributions of Cu and Zn in processed particles indicated that M. edulis was able to ingest paint particles, regardless of whether nutritionally viable silt was present, and no mechanism of particle discrimination was evident. Enrichment of Cu and Zn in the visceral mass of individuals and in the aqueous phase during depuration supported these assertions, although elevated concentrations in other compartments of the organism (e.g. shell, gill) suggested that biotic and abiotic uptake of aqueous metal was also important.     

Accumulation of platinum group elements by the marine gastropod Littorina littorea

The accumulation and trophic transfer of the platinum group elements (PGE): Rh, Pd and Pt; have been studied in short-term (5 day) exposures conducted in aquaria containing the marine macroalga, Ulva lactuca, and/or the grazing mollusc, Littorina littorea. Metals added to sea water (to concentrations of 20 μg L⁻¹) were taken up by U. lactuca in the order Rh, Pt > Pd and by L. littorea in the order Pd ≥ Pt ≥ Rh, with greatest metal accumulation in the latter generally occurring in the visceral complex and kidney. When fed contaminated alga, accumulation of Rh and Pd by L. littorea, relative to total available metal, increased by an order of magnitude, while accumulation of Pt was not readily detected. We conclude that the diet is the most important vector for accumulation of Rh and Pd, while accumulation of Pt appears to proceed mainly from the aqueous phase.     

Leaching of Cu and Zn from discarded boat paint particles into tap water and rain water

We studied the leaching of copper and zinc from particles of discarded boat paint added to tap water (pH 7.3) and rain water (pH = 4.7), simulating conditions encountered during the hosing or runoff of antifouling waste. Leaching rates appeared to be diffusion-controlled and were greater in rain water than in tap water and were greater for Zn than for Cu. After a period of 120 h, between about 0.5% and 3% of total Cu and 5-30% of total Zn had been released to the aqueous phase. These observations suggest that Cu and Zn mobilised from fine antifouling particulates during washdown or rainfall events may be important contaminants of runoff and soils in the vicinity of boat repair facilities.     

Zinc accumulation potential and toxicity threshold determined for a metal-accumulating Populus canescens clone in a dose–response study

The effect of increasing soil Zn concentrations on growth and Zn tissue concentrations of a metal-accumulating aspen clone was examined in a dose–response study. Plants were grown in a soil with a low native Zn content which was spiked with Zn salt solutions and subsequently aged. Plant growth was not affected by NH₄NO₃-extractable soil Zn concentrations up to 60 μg Zn g^?1 soil, but it was completely inhibited at extractable concentrations above 90 μg Zn g^?1 soil. From these data an effective concentration of 68.5 μg extractable Zn g^?1 soil was calculated at which plant growth was reduced by 50%. The obtained information on toxicity threshold concentrations, and the relation between plant Zn accumulation and extractable soil Zn concentrations may be used to assess the suitability of the investigated Populus canescens clone for various phytoremediation strategies. The potential risk of metal transfer into food webs associated with P. canescens stands on Zn-polluted sites may also be estimated.     

Impact of earthworms on trace element solubility in contaminated mine soils amended with green waste compost

The common practice of remediating metal contaminated mine soils with compost can reduce metal mobility and promote revegetation, but the effect of introduced or colonising earthworms on metal solubility is largely unknown. We amended soils from an As/Cu (1150 mgAs kg⁻¹ and 362 mgCu kg⁻¹) and Pb/Zn mine (4550 mgPb kg⁻¹ and 908 mgZn kg⁻¹) with 0, 5, 10, 15 and 20% compost and then introduced Lumbricus terrestris. Porewater was sampled and soil extracted with water to determine trace element solubility, pH and soluble organic carbon. Compost reduced Cu, Pb and Zn, but increased As solubility. Earthworms decreased water soluble Cu and As but increased Pb and Zn in porewater. The effect of the earthworms decreased with increasing compost amendment. The impact of the compost and the earthworms on metal solubility is explained by their effect on pH and soluble organic carbon and the environmental chemistry of each element.     

Persistence of TBT and copper in excess on leisure boat hulls around the Baltic Sea

A handheld XRF-analyzer specially calibrated for measurements of metals on plastic boat hulls has been used on leisure boats in Denmark (DK), Finland (FI), and Germany (DE). The results on tin and copper are presented as μg metal/cm². Tin is a proxy for the occurrence of organotin compounds on the boat. Two or three sites were visited in each country and between 25 and 90 boats were measured at each site. Every boat was measured at six to eight places, and the results are presented both as mean and median values. Linear regression of mean to median values of the 377 data pairs shows high relationship with R²?=?0.9566 for tin and R² of 0.9724 for copper and thus both ways of calculation may be used. However, for regulative use, it is suggested that all individual measurements on each boat should be presented and used for decisions of removal or sealing of boat hulls. The results are compared with published data from different parts of Sweden, i.e., boats in fresh water, brackish water, and salt water. The results show that tin with mean values >?50 μg Sn/cm² is still found on 42, 24, and 23% of the boats in DK, FI, and DE, respectively. The corresponding percentages based on median values are 38, 22, and 18% for DK, FI, and DE, respectively. The variation among boats is high with a maximum mean value of 2000 μg Sn/cm². As comparison, one layer of an old TBT antifouling paint Hempels Hard racing superior, corresponds to 300 μg Sn/cm². The percentage of boats with tin >?400 μg Sn/cm² content based on mean values was 10% in DK, 5% in FI, and 1% in DE. The corresponding median values were 9, 6, and 1% for DK, FI, and DE. Copper, >?100 μg Cu/cm², was detected on all measured boats in DK and in DE and on all but 3% of the FI boats. One layer of Hempels MilleXtra corresponds to ? 4000 μg Cu/cm². The recommendation on the can is to apply two layers. The proportion of boats with higher mean copper values than 8000 μg Cu/cm² was 51, 56, and 61 for boats in DK, FI, and DE, respectively. The proportion based on median values >?8000 μg Cu/cm² was 50, 54, and 61% for DK, FI, and DE. The conclusion is that many leisure boats around the Baltic Sea still display or possess antifouling paints containing organotin compounds and that more than half of the boats have more copper than needed for one boat season according to the paint producers. Much of these known toxic compounds will probably be released into the environment and harm the biota. The calibrated XRF-method, intended for area measurements on boat hulls, is an easy and cheap way to detect boats with organotin compounds and high copper content. We recommend environmental authorities to use this method for identification of such boats and to use the results for requesting measures to minimize further leakage to the environment.

     

Bioaccessibility of metals in soils and dusts contaminated by marine antifouling paint particles

Fragments of antifouling paint and environmental geosolids have been sampled from the island of Malta and analysed for total and bioaccessible metals. Total concentrations of Ba, Cd, Cu, Pb, Sn and Zn were two to three orders of magnitude higher in spent antifouling composites relative to respective values in background soils and road dusts. Paint fragments were visible in geosolids taken from the immediate vicinity of boat maintenance facilities and mass balance calculations, based on Ba as a paint tracer, suggested that the most contaminated soils, road dusts and boatyard dusts contained about 1%, 7% and 9%, respectively, of antifouling particles. Human bioaccessibilities of metals were evaluated in selected samples using a physiologically based extraction technique. Accessibilities of Cd, Cu, Pb and Zn in the most contaminated solids were sufficient to be cause for concern for individuals working in the boat repair industry and to the wider, local community.     

Synthesis of isotopically modified ZnO nanoparticles and their potential as nanotoxicity tracers

Understanding the behavior of engineered nanoparticles in the environment and within organisms is perhaps the biggest obstacle to the safe development of nanotechnologies. Reliable tracing is a particular issue for nanoparticles such as ZnO, because Zn is an essential element and a common pollutant thus present at elevated background concentrations. We synthesized isotopically enriched (89.6%) with a rare isotope of Zn (⁶⁷Zn) ZnO nanoparticles and measured the uptake of ⁶⁷Zn by L. stagnalis exposed to diatoms amended with the particles. Stable isotope technique is sufficiently sensitive to determine the uptake of Zn at an exposure equivalent to lower concentration range (<15 μg g⁻¹). Without a tracer, detection of newly accumulated Zn is significant at Zn exposure concentration only above 5000 μg g⁻¹ which represents some of the most contaminated Zn conditions. Only by using a tracer we can study Zn uptake at a range of environmentally realistic exposure conditions.     

Increased persistence of antifouling paint biocides when associated with paint particles

Current regulatory risk assessment procedures only assess the impact of antifouling paint biocides that are released through leaching from a painted surface. Hull cleaning activities can lead to particles of antifouling paint containing biocides to enter the environment. Comparative pseudo-first order anaerobic degradation rate constants and half-lives were determined for a selection of common antifouling paint booster biocides, their degradation products, and associated with paint particles. Anaerobic half-lives of <0.5 days were calculated for chlorothalonil, dichlofluanid, and SeaNine 211, between 1 and 3 days for DCPMU and DCPU, between 14 and 35 days for diuron and CPDU, and over 226 days for GS26575 and Irgarol 1051. Increased persistence was observed when the compounds were introduced to sediments associated with antifouling paint particles. When present as antifouling paint particles, an increased half-life of 9.9 days for SeaNine 211 and 1.4 days was calculated for dichlofluanid, no significant degradation was observed for diuron. It is suspected that this is due to much of the biocide being initially bound within the matrix of the paint particle that is slowly released through dissolution processes into the sediment pore water prior to degradation. The release of booster biocides associated with paint particles into marinas has the potential to lead to their accumulation unless activities such as hull cleaning are strictly regulated.     

Distribution and accumulation of elements (As, Cu, Fe, Hg, Mn, and Zn) in tissues of fish species from different trophic levels in the Danube River at the confluence with the Sava River (Serbia)

Pikeperch (Sander lucioperca), European catfish (Silurus glanis), common carp (Cyprinus carpio), and gobies (Neogobius gymnotrachelus, Neogobius melanostomus) were collected from the Danube River (Belgrade section), and samples of liver, muscle, or whole-body composites (in the case of gobies) were analyzed for As, Cu, Fe, Hg, Mn, and Zn with inductively coupled plasma optical spectrometry to find out if there was a correlation between accumulation of these elements in predatory and prey species, as well as in pairs of species with overlapping diets. Concentrations of all analyzed elements were either higher (Cu, Fe, Mn, Zn) in liver than in muscle, or equal (As, Hg), except for Hg in carp, which was higher in muscle. Mercury concentration in liver and muscle of predators (catfish, pikeperch) was significantly (<10^?4) higher than in prey fishes (carp and gobies). The results indicate that Hg concentration was biomagnified through the food chain. Concentrations of As, Fe, and Hg in carp liver and gobies whole-body composite were similar, but carp had significantly (<10^?4) higher values of Zn and Cu in liver. The regression analysis and trendline equations indicate that the concentrations of all tested elements, except for As in liver, and Mn and Fe in muscle, were similar in predatory fish (pikeperch and catfish), on one hand, and in prey fish (carp and gobies), on the other hand. Distinctly high Zn concentration in carp is very common in this species due to its physiology. Concentrations of Hg and Zn were higher than the maximum acceptable concentration due to the high pollution level in this section of the Danube River, accordingly posing a risk for the human consumption of these fish species.     

An evaluation of the toxicity and bioaccumulation of cisplatin in the marine environment using the macroalga, Ulva lactuca

The cytotoxic drug, cisplatin (cis-PtCl₂(NH₃)₂), has been added to cultures of the marine macroalga, Ulva lactuca, under various experimental conditions. Both accumulation and internalisation over a 48 h period was greater when cisplatin was added to coastal sea water (salinity = 33) from a distilled water solution than when added to either sea water or estuarine water (salinity = 16.5) from a saline solution. This effect is attributed to the greater abundance of the more reactive monoaqua complex (cis-PtCl(OH₂)(NH₃)₂⁺) in the distilled water solution and kinetic constraints on its conversion back to cis-PtCl₂(NH₃)₂ in sea water. Despite its mode of action at the cellular level, cisplatin added up to concentrations of 150 nM did not incur a measurable reduction in the efficiency of photochemical energy conversion under any of experimental conditions tested.     

Heavy metals exposure of children from stairway and sidewalk dust in the smelting district,northeast of China

The aim of this work was to study metals accumulation in stairway (inside the residential building) and sidewalk (outside the residential building) dust, and health risk of children due to dust exposure. The investigation included the: (a) spatial distributions of Hg, Pb, Cd, Zn and Cu in stairway and sidewalk dust, (b) source analysis of metals in stairway and sidewalk dust, and (c) assessment of the children health risks due to metals exposure from stairway and sidewalk dust. In the smelting district of Huludao, the maximum Hg, Pb, Cd, Zn and Cu contents in stairway dust were 5.324, 4594, 936.8, 48 253, 1377 mg kg^?1, respectively, and were 144, 213, 8674, 760 and 69.5 times as high, respectively, as the background values in soil. A strong positive relationship was shown between the stairway and sidewalk dust for each metal (p < 0.01). The trends for Hg, Pb, Cd, Zn and Cu in the stairway and sidewalk dust were similar and with higher concentrations trending Huludao Zinc Plant (HZP). Atmospheric deposition due to metal smelting from HZP was the common source of heavy metals in the sidewalk and stairway dust. Vehicular traffic affected the metal accumulation in dust, but their contribution was slight comparing with atmospheric emission from HZP. Almost all hazard indexes (HIs) for metals due to stairway dust exposure in this study were lower than 1. The health risk for children was low if they would not play in the stairway. However, children were also experiencing the potential health risk from Cd and Pb exposure from sidewalk dust outside residential building, especially near HZP.     

Comparative tolerance of Pinus radiata and microbial activity to copper and zinc in a soil treated with metal-amended biosolids

A study was conducted to evaluate the effects of elevated concentrations of copper (Cu) and zinc (Zn) in a soil treated with biosolids previously spiked with these metals on Pinus radiata during a 312-day glasshouse pot trial. The total soil metal concentrations in the treatments were 16, 48, 146 and 232 mg Cu/kg or 36, 141, 430 and 668 mg Zn/kg. Increased total soil Cu concentration increased the soil solution Cu concentration (0.03–0.54 mg/L) but had no effect on leaf and root dry matter production. Increased total soil Zn concentration also increased the soil solution Zn concentration (0.9–362 mg/L). Decreased leaf and root dry matter were recorded above the total soil Zn concentration of 141 mg/kg (soil solution Zn concentration, >4.4 mg/L). A lower percentage of Cu in the soil soluble?+?exchangeable fraction (5–12 %) and lower Cu²⁺ concentration in soil solution (0.001–0.06 μM) relative to Zn (soil soluble?+?exchangeable fraction, 12–66 %; soil solution Zn²⁺ concentration, 4.5–4,419 μM) indicated lower bioavailability of Cu. Soil dehydrogenase activity decreased with every successive level of Cu and Zn applied, but the reduction was higher for Zn than for Cu addition. Dehydrogenase activity was reduced by 40 % (EC₄₀) at the total solution-phase and solid-phase soluble?+?exchangeable Cu concentrations of 0.5 mg/L and 14.5 mg/kg, respectively. For Zn the corresponding EC₅₀ were 9 mg/L and 55 mg/kg, respectively. Based on our findings, we propose that current New Zealand soil guidelines values for Cu and Zn (100 mg/kg for Cu; 300 mg/kg for Zn) should be revised downwards based on apparent toxicity to soil biological activity (Cu and Zn) and radiata pine (Zn only) at the threshold concentration.     

Floating particles with high copper concentration in the sea-surface microlayer

This study sought to clarify whether suspended particles containing high Cu concentrations are present in the sea-surface microlayer (S-SML). For this reason, suspended particles (10–2000 μm) in the S-SML were collected periodically from a ship mooring pond during 2018–2020, and the acid-soluble Cu concentration in the suspended particles was measured as particulate Cu (P-Cu). The highest concentration of P-Cu in the S-SML of the pond was 75 μg L^?1 with a 90th percentile value of 2.5 μg L^?1. This is below P-Cu values reported for the S-SML in North American ports, but 140 times higher than this found in bulk seawater in the Atlantic Ocean. The highest P-Cu concentration in the S-SML of non-organism (abiotic) origin was 17 μg L^?1, and the abiotic P-Cu to P-Cu ratio varied from 0.2 to 100%, likely depending on the quality and quantity of biogenic material in the S-SML samples. It is assumed that the S-SML particles examined here contain high Cu concentrations originating from ship antifouling paints.

     

Adsorption of Pb,Cd, Cu,Zn, and Ni to titanium dioxide nanoparticles: effect of particle size,solid concentration,and exhaustion

Purpose  

Adsorption of metals (Pb, Cd, Cu, Ni, Zn) to TiO₂ nanoparticles and bulk particles was examined for use as a contaminant removal substrate as a function of particle size, sorbent concentration, and exhaustion.     

Phytoremedial assessment of flora tolerant to heavy metals in the contaminated soils of an abandoned Pb mine in Central Portugal

Significant accumulation of heavy metals in soils and flora exists around the abandoned Barbadalhos Pb mine in Central Portugal. Soil and plant samples [49 species] were collected from two line transects, LT 1 and LT 2, in the mineralized and non-mineralized area, respectively to gain a comprehensive picture of heavy metals in soils and flora to assess its potential for phytoremediation. Phytosociological inventories of the vegetation were made using the Braun-Blanquet cover-abundance scale. Metal concentrations in soil ranged from (in mg kg^?1): 98–9330 [Pb], 110–517 [Zn], 7.1–50 [Co], 69–123 [Cr], 31–193 [Cu], 33 400–98 500 [Fe], 7.7–51 [Ni], 0.95–13 [Ag], 2.8–208 [As], and 71–2220 [Mn] along LT 1; and 24–93 [Pb], 30–162 [Zn], 3.7–34 [Co], 61–196 [Cr], 21–46 [Cu], 24 100–59 400 [Fe], 17–87 [Ni], 0.71–1.9 [Ag], 4.3–12 [As], and 44–1800 [Mn] along LT 2. Plant metal content ranged from (in mg kg^?1): 1.11–548 [Pb], 7.06–1020 [Zn], 0.08–2.09 [Co], 0.09–2.03 [Cr], 2.63–38.5 [Cu], 10.4–4450 [Fe], 0.38–8.9 [Ni], and 0.03–1.9 [Ag] along LT 1; and 0.94–11.58 [Pb], 2.83–96.5 [Zn], 0.12–1.44 [Co], 0.21–1.49 [Cr], 1.61–22.7 [Cu], 4.6–2050 [Fe], 0.51–4.81 [Ni], and 0.02–0.31 [Ag] along LT 2. Plants with highest uptake of metals were: Cistus salvifolius (548 mg Pb kg^?1), Digitalis purpurea (1017 mg Zn kg^?1 and 4450 mg Fe kg^?1). Mentha suavolens and Ruscus ulmifolius were seen to hyperaccumulate Ag (1.9 and 1 mg Ag kg^?1, respectively). More metals and higher concentrations were traced in plants from LT 1, especially for Pb and Zn.     

Toxicity of anti-fouling paints for use on ships and leisure boats to non-target organisms representing three trophic levels

Leachates of anti-fouling paints for use on ships and leisure boats are examined for their ecotoxicological potential. Paint leachates were produced in both 7‰ artificial (ASW) and natural seawater (NSW) and tested on three organisms, the bacterium Vibrio fischeri, the macroalga Ceramium tenuicorne, and the crustacean Nitocra spinipes. Generally, leaching in ASW produced a more toxic leachate and was up to 12 times more toxic to the organisms than was the corresponding NSW leachate. The toxicity could be explained by elevated concentrations of Cu and Zn in the ASW leachates. Of the NSW leachates, those from the ship paints were more toxic than those from leisure boat paints. The most toxic paint was the biocide-free leisure boat paint Micron Eco. This implies that substances other than added active agents (biocides) were responsible for the observed toxicity, which would not have been discovered without the use of biological tests.