Summary of the 1989 EPA/A&WMA International Symposium: Measurement of Toxic and Related Air Pollutants

A joint conference, for the fourth straight year cosponsored by the Air & Waste Management Association’s TP-6, TP-7, and ITF-2 technical committees, and the Atmospheric Research and Exposure Assessment Laboratory of the U. S. Environmental Protection Agency, was held at Raleigh, North Carolina, May 2-5, 1989. The technical program consisted of 145 presentations, held in 14 separate technical sessions, on recent advances in the measurement and monitoring of toxic and related pollutants found in ambient and source atmospheres. Covering a wide range of measurement topics and superbly supported by 57 exhibitors of instrumentation and consulting services, the symposium was enthusiastically received by more than 700 attendees from the United States and other countries. This overview contains a selection of the highlights from the technical presentations. A synopsis of the keynote address to the symposium is also included.     

Stationary Combustion NOX Control A Summary of the 1989 Symposium

This paper summarizes information and results presented at the 1989 Symposium on Stationary Combustion NOX Control, held March 6-9, 1989 in San Francisco. Cosponsored by the Electric Power Research Institute (EPRI) and the U.S. Environmental Protection Agency, (EPA) the symposium was the fifth in a biennial series.     

A Specialty Conference Summary

The Lake Michigan States Section hosted an International Specialty Conference in Chicago during March 22-24, 1983. Jointly sponsored by APCA's TP-6, TP-7, TP-9 and TT-5 Technical Committees, the technical program consisted of 49 presentations over 10 separate technical sessions. Covering a diverse range of air toxicant measurement issues, and superbly supported by the excellent instrumentation exhibit, the conference was enthusiastically received by nearly 200 attendees. General Chairmen of the conference were Frank Werderitsch, Material Service Corporation, Lyons, Illinois, and Jay Norco, ETA Engineering, Inc., Westmont Illinois.

This overview contains a selection of the highlights from the technical presentations. Of particular interest were the invited presentations of key government and industry representatives who outlined their respective activities and approaches related to toxic air contaminants. A synopsis of those government and industry remarks are also contained herein.     

The Location of Maximum Exposure Due to An Instantaneous Release from a Point Source

An international specialty conference, jointly sponsored by the Air &; Waste Management Association (A&;WMA) and the U.S. Environmental Protection Agency (EPA), entitled “PM₁₀ Standards and Nontraditional Particulate Source Controls,” was held in Scottsdale, Arizona, January 12-15, 1992. The conference included 92 presentations in 17 technical sessions. Eighty-one peer-reviewed technical papers, two keynote addresses and one panel session summary describing novel applications, measurement processes, modeling techniques and control measures for nontraditional pollution sources are assembled in the Transactions¹. The technical issues addressed during the conference included: (1) measurement methods and data bases; (2) emissions source characterization; (3) source apportionment of nontraditional sources; (4) fugitive dust characterization and control technologies; (5) vegetative burning characterization and control technologies; (6) sources and controls of secondary aerosol and motor vehicle precursors; and (7) regulatory policies and State Implementation Plan (SIP) development. This paper gives an overview of the technical program     

1987 Joint EPRI/EPA Symposium on Stationary Combustion NOX Control

From March 23rd to 26th, 1987, the city of New Orleans hosted 350 attendees, including representatives from 15 foreign countries, at the 1987 Joint Symposium on Stationary Combustion NO_x Control. Cosponsored by the Electric Power Research Institute (EPRI) and the U.S. Environmental Protection Agency (EPA), the symposium provided attendees the opportunity to hear 49 papers in nine sessions covering technological and regulatory developments on NO_x control in the United States and abroad since the May 1985 symposium in Boston. Session topics included general environmental issues, low-NO_x combustion equipment (i.e., low-NO_x burners, reburning, etc.), flue gas treatment, fundamental combustion research, and special issues for cyclone coal-fueled boilers, oil- and gas-fired boilers, and industrial combustion applications.

Advances to the state-of-the-art presented at this symposium include: improved and/or newly applied combustion modifications for pulverized coal-fired boilers; further analyses of reburning, the leading combustion modification option for cyclone-equipped boilers; initial experiences with catalytic flue gas treatment in Europe; studies of NO_x control retrofit options for oil- and gas-fired utility systems; and new technology developments for coal, oil, and gas fueled utility and industrial combustors.

This paper summarizes those presentations that discussed significant changes since May 1985 in areas of potential interest to EPRI and its utility members. Where appropriate, they include our perspectives on the applicability of these newly disclosed findings to utility systems.     

Summary of the 1991 EPA/A&WMA International Symposium: Measurement of Toxic and Related Air Pollutants

A joint conference cosponsored for the sixth year by the Atmospheric Research and Exposure Assessment Laboratory (AREAL) of the U.S. Environmental Protection Agency and the Air & Waste Management Association was held in Durham, North Carolina, May 6–10, 1991. The technical program consisted of 220 presentations, held in 25 technical sessions, on recent advances in ambient and source atmospheres. Covering a wide range of measurement topics and supported by 78 exhibitors of instrumentation and consulting services, the symposium was attended by almost a thousand professionals from the United States and other countries. This overview highlights a selection of the technical presentations, and includes a synopsis of the keynote address.     

1992 Update of U.S. EPA’s Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program

The Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program (ETP) has encouraged and financially supported further development of bench- and pilot-scale testing and evaluation of innovative technologies suitable for use at hazardous waste sites for five years. The ETP was established under the Superfund Amendments and Reauthorization Act (SARA) of 1986. The ETP complies with the goal of the SITE Program to promote, accelerate and make commercially available the development ofalternative /innovative treatment technologies for use at Superfund sites.

Technologies are submitted to the ETP through yearly solicitations for Preproposals. Following a technical review, chosen applicants are asked to submit a detailed project proposal and a cooperative agreement application that requires Developer I EPA cost sharing. EPA co-funds selected Developers for one to two years. Second-year funding requires documentation of significant progress during the first year. Facilities, equipment, data collection, performance and development are monitored throughout the project. The U. S. Department of Energy (DOE) and the U. S. Air Force (USAF) are participants in the ETP. DOE has co-funded ETP projects since 1990 and the USAF since 1991.

A primary goal of the ETP is to move developed technologies to the field-demonstration stage. Therefore, a developer may be considered for participation in the SITE Demonstration Program provided performance in the ETP indicates the technology is field-ready for demonstration and evaluation.

Six technology categories: biological, chemical, materials handling, physical, solidification/ stabilization and thermal, are presently in the ETP.

Technologies of primary interest to EPA are those that can treat complex mixtures of hazardous organic and inorganic contaminants and provide improved solids handling and/orpretreatment.

An account of the background and progress of the ETP’s first five years is presented in this paper. Technologies currently in the ETP, including those selected from the fifth (EOS) solicitation, are noted, and developers, along with EPA Project Managers, are listed.     

Regional Photochemical Measurement and Modeling Studies: A Summary of the Air & Waste Management Association International Specialty Conference

Abstract

This paper summarizes the Air & Waste Management Association’s International Specialty Conference, "Regional Photochemical Measurement and Modeling Studies," held in San Diego, California, on November 8-12,1993. The purpose of the conference was to facilitate exchange of information and to initiate better communication and interaction among scientists, air quality managers, regulators, and others involved in or applying tools (models and measurements to support the modeling efforts) that can be used to develop equitable and effective emissions management practices for attainment of ozone standards. Attendees heard more than 350 presentations from authors representing nearly 30 air quality and meteorological measurement and modeling studies from 18 countries. While the primary emphasis of the conference was technical, two policy sessions were included (Plenary and Concluding Sessions) to place the technical results in perspective with the policy issues. The technical agenda was divided into three subjects: Analysis of Field Measurements (results and interpretation), Modeling (status and results), and Other Topics. Papers presented at the conference are being published in a variety of journals or books to meet the needs of the scientific and policy communities. A complete bibliographical listing of the papers presented at the conference is included with this paper.

An unexpected outcome of the conference has been the development of an initiative for continuing the intercomparison of goals and scientific findings from regional air quality studies in Europe and North America, entitled “Regional Oxidants Programs Intercomparison” (ROxPIn). This paper will also discuss the goals and objectives of ROxPIn.     

Measurement of Toxic and Related Air Pollutants

A joint conference for the fifth straight year cosponsored by the Air & Waste Management Association’s EM-3, EM-4, and ITF-2 technical committees, and the Atmospheric Research and Exposure Assessment Laboratory (AREAL) of the U.S. Environmental Protection Agency, was held in Raleigh, North Carolina, May 1–4, 1990. The technical program consisted of 187 presentations, held in 20 technical sessions, on recent advances in the measurement and monitoring of toxic and related pollutants found in ambient and source atmospheres. Covering a wide range of measurement topics and supported by 66 exhibitors of instrumentation and consulting services, the symposium was attended by more than 850 professionals from the United States and other countries. This overview highlights a selection of the technical presentations. A synopsis of the keynote address to the symposium is also included.     

How clean is clean? Cleanup criteria for contaminated soil and groundwater.

An international specialty conference cosponsored by the Air & Waste Management Association's New England Section and the WF-2, EE-5 and EP-1 technical committees was held in Boston, Massachusetts on November 7-9, 1990. The technical program consisted of 39 presentations, held in eight technical sessions, exploring a wide range of topics related to the development of cleanup criteria for contaminated soil and groundwater. Supported by 11 exhibitors, the conference was attended by more than 350 professionals from the United States and other countries. This overview by the Technical Program Chair highlights a selection of the technical presentations.     

Analysis of Complex Mixtures of Vapors in Ambient Air by Fast-Gas Chromatography

An international specialty conference cosponsored by the Air & Waste Management Association's New England Section and the WF-2, EE-5 and EP-1 technical committees was held in Boston, Massachusetts on November 7-9, 1990. The technical program consisted of 39 presentations, held in eight technical sessions, exploring a wide range of topics related to the development of cleanup criteria for contaminated soil and groundwater. Supported by 11 exhibitors, the conference was attended by more than 350 professionals from the United States and other countries. This overview by the Technical Program Chair highlights a selection of the technical presentations.     

Summary of the 1991 EPRI/EPA/DOE SO2 Control Symposium

The 1991 SO₂ Control Symposium was held December 3-6, 1991, in Washington, D.C. The symposium, jointly sponsored by the Electric Power Research Institute (EPRI), the U.S. Environmental Protection Agency (EPA), and the U.S. Department of Energy (DOE), focused attention on recent improvements in conventional sulfur dioxide (SO₂) control technologies, emerging processes, and strategies for complying with the Clean Air Act Amendments of 1990. Its purpose was to provide a forum for the exchange of technical and regulatory information on SO₂ control technology. Over 800 representatives of 20 countries from government, academia, flue gas desulfurization (FGD) process suppliers, equipment manufacturers, engineering firms, and utilities attended. In all, 50 U.S. utilities and 10 utilities in other countries were represented. In 11 technical sessions, a diverse group of speakers presented 111 technical papers on development, operation, and commercialization of wet and dry FGD, Clean Coal Technologies, and combined sulfur dioxide/nitrogen oxides (SO₂/NO_x processes.     

A Summary of the A&WMA/EPA International Specialty Conference

“Visibility and Fine Particles“, the fourth in a series of international specialty conferences on atmospheric visibility, was sponsored by the Air and Waste Management Association and the U.S. Environmental Protection Agency. The purpose of this conference was to provide a forum to disseminate the results of recent advances in visibility and fine particles. The 110 papers presented at the conference covered six topics: policy and regulatory issues, visibility and fine particle measurements, human perception of visibility, meteorological factors affecting visibility, economic valuation of visibility, and visibility and fine particle modeling and source apportionment. Eighty-five of those papers are included in the conference Transactions and are summarized in this article.     

Field Testing and Computer Modeling of an Oxygen Combustion System at the EPA Mobile Incinerator

The LINDE® Oxygen Combustion System has been demonstrated successfully at the EPA Denney Farm site as part of the modified EPA mobile incinerator. This paper describes the field testing results and computer modeling of the LINDE system. The oxygen system enables the EPA unit to incinerate dioxin and PCB contaminated soil at a consistent rate of 4000 lb/h—200 percent of the original maximum capacity. The pure oxygen combustion system improved the thermal efficiency of the incinerator by over 60 percent and reduced the flue gas volume dramatically. Therefore, the dust carryover problem was mitigated. The destruction and removal efficiencies of hazardous wastes exceeded EPA requirements.

The design of the proprietary burner allows the use of up to 100 percent oxygen in place of air for incineration with improvements over conventional oxy-fuel burners. As a result, the temperature distributions in the rotary kiln are uniform and NO_x emissions are low.

The oxygen combustion system, controlled by a programmable controller, provided much better response and flexibility than conventional air based systems. The system generated a stable flame and responsed well to the transient conditions of the rotary kiln. Kiln puff occurrence was virtually eliminated in the operation of the mobile incinerator.

A computer model of the incinerator was developed and used for the process design of the LINDE system. The model predicted the test results reasonably well. This model can be a useful tool in the design and operation of rotary kiln incineration systems.     

EPA SITE Demonstration of the International Waste Technologies/Geo-Con In Situ Stabilization/Solidification Process

This paper presents an EPA evaluation of the first field demonstration of an in situ stabilization/solidification process for contaminated soil under the EPA Superfund Innovative Technology Evaluation (SITE) program. Demonstration of this process was a joint effort of two vendors: ? International Waste Technologies (IWT) of Wichita, Kansas, who provided the treatment process, specifically the proprietary additive called HWT-20, and

? Geo-Con, Inc., of Pittsburgh, Pennsylvania, who provided both engineering and hardware for the in situ soil treatment.

The field demonstration took place in April, 1988 at a site in Hialeah, Florida, contaminated mainly with polychlorinated biphenyls (PCBs). EPA tested the soil before and after treatment and the EPA evaluation of this process is based on results from this testing. A year later, in April 1989, EPA tested again the treated soil and results of that testing were compared to those of the demonstration. Results of the EPA evaluation of the IWT process, the Geo-Con performance, and treatment costs are discussed separately.     

Validation of the Digital Opacity Compliance System under Regulatory Enforcement Conditions

Abstract

U.S. Environmental Protection Agency (EPA) Emission Measurement Center in conjunction with EPA Regions VI and VIII, the state of Utah, and the U.S. Department of Defense have conducted a series of long-term pilot and field tests to determine the accuracy and reliability of a visible opacity monitoring system consisting of a conventional digital camera and a separate computer software application for plume opacity determination. This technology, known as the Digital Opacity Compliance System (DOCS), has been successfully demonstrated at EPA-sponsored Method-9 “smoke schools,” as well as at a number of government and commercially operated industrial facilities.

Results from the current DOCS regulatory pilot study demonstrated that, under regulatory enforcement conditions, the average difference in opacity measurement between the DOCS technology and EPA Reference Method 9 (Method 9) was 1.12%. This opacity difference, which was computed from the evaluation of 241 regulated air sources, was found to be statistically significant at the 99% confidence level. In evaluating only those sources for which a nonzero visible opacity level was recorded, the average difference in opacity measurement between the DOCS technology and Method 9 was 1.20%. These results suggest that the two opacity measurement methods are essentially equivalent when measuring the opacity of visible emissions.

Given the costs and technical limitations associated with use of Method 9, there is a recognized need to develop accurate, reproducible, and scientifically defensible alternatives to the use of human observers. The use of digital imaging/processing brings current technology to bear on this important regulatory issue. Digital technology offers increased accuracy, a permanent record of measurement events, lower costs, and a scientifically defensible approach for opacity determination.     

International Diffusion of Open Path FTIR Technology and Air Monitoring Methods: Taiwan (Republic of China)

Abstract

International cooperation and diffusion of environmental technologies is a central goal of the U.S. EPA Environmental Technology Initiative, and is of great interest to many countries. One objective is to exchange knowledge and skills concerning new monitoring technologies. In this case, the technology was open path Fourier Transform Infrared Spectrometry (op-FTIR).

Taiwan is a high-technology, newly industrialized country. Because of air pollution problems, it is interested in obtaining skills, knowledge, and instrumentation for monitoring air pollutants. In April 1994, the Industrial Technology Research Institute, Center for Industrial Safety and Health Technology (ITRI/CISH) in Hsinchu, Taiwan, requested intensive training in op-FTIR. Training was held between September 30,1994 and October 29,1994.

During the stay, the instructor provided intensive training on op-FTIR theory as well as an introduction to available instrumentation and software. The training concluded with a field demonstration of the instrumentation in a manufacturing facility. This report gives an overview of the training methods, structure, and materials in the op-FTIR training course. It will also address various problems encountered while teaching this course. In addition, the potential use for this technology in industry as well as by the Taiwanese government will be explained.     

Workshop on Primary Sulfate Emissions

This article is a summary report on a workshop, Measurement Technology and Characterization of Primary Sulfur Oxides Emission from Combustion Sources, sponsored by the EPA Environmental Sciences Research Laboratory at Research Triangle Park, NC, held in Southern Pines, NC. The objectives of the workshop were: to review and discuss current measurement methods and problem areas for sulfur oxides emission with attention focused on sulfuric acid, sulfates, and sulfur-bearing particulate matter; to review and discuss emission data from various combustion sources operating under different conditions, which include various pollutant controls, fuel composition, excess boiler oxygen, etc.; to delineate and recommend areas in need of research and development effort. Scientists were invited to present the results of their studies on primary sulfate emissions. The 3-day workshop devoted one day to measurement technology, a second to characterization, and a third to critical assessment of the presented papers and development of summary working group reports on each half-day session of the initial 2 days. Thirty-one papers were presented by 29 participants on measurements and characterization. Four working group reports were developed and summarized in the last day. Highlights of the papers and reports are briefly reviewed. Workshop proceedings are available as an EPA publication.     

Third Conference on Fabric Filter Technology for Coal-Fired Power Plants

This paper summarizes information and results presented at the Third Conference on Fabric Filter Technology for Coal-Fired Power Plants held November 19-21, 1985 in Scottsdale, Arizona. Sponsored by the Electric Power Research Institute (EPRI), in cooperation with the Arizona Public Service Co. and Salt River Project, the conference focused on recent technological developments in the design and operation of fabric filters (baghouses) in electric utility settings. Papers were presented by individuals representing utilities, fabric filter manufacturers, research and development organizations, and regulatory agencies. Approximately 200 individuals attended the sessions. Summaries of the first two conferences and results of other fabric Biter research sponsored bv EPRI have been published previously in JAPCA.^1–9     

Highlights of the Second International Conference on Managing Hazardous Air Pollutants

As the time approaches for the U.S. Environmental Protection Agency (EPA) to evaluate whether risks from electric utility trace substance emissions are of concern, attention is focused on research to clarify the many issues surrounding this topic. Accordingly, more than 230 representatives of industry, government, international research and academic institutions, equipment manufacturers, and engineering service firms attended the Second International Conference on Managing Hazardous Air Pollutants, which was held in Washington, D.C., on July 13–15,1993. Sponsored by the Electric Power Research Institute (EPRI) in cooperation with the EPA, U.S. Department of Energy (DOE), PowerGen, Coal Research Division of the International Energy Agency, and Canadian Electrical Association, the conference featured more than 50 presentations that both asked and answered questions about utility emission sources, the atmospheric fate of emitted substances, health and environmental studies, risk assessment, and control technologies. The diversity of the audience produced a stimulating exchange of findings, interpretations, and assessments of remaining uncertainties. This exchange provided valuable direction for ongoing research activities worldwide.