不同泥龄对活性污泥絮凝特性的影响

为了揭示不同污泥龄活性污泥的絮凝特性及作用机制,采用序批式反应器,考察污泥龄(solid retention time,SRT)对絮体EPS(extra-micro colony polymeric substances,EMPS)和菌胶团EPS(extra-cellular polymeric substances,ECPS)2种EPS组分的影响,通过扩展的DLVO理论和EPS组分解析不同污泥龄的絮凝性能。研究结果表明,随着SRT的增大,活性污泥的相互作用能曲线存在明显的势垒和势垒值逐渐减少,EMPS和ECPS含量逐渐减少,且相对于ECPS的变化,EMPS含量随泥龄的变化更加明显,其中蛋白质与腐殖质含量逐渐降低,污泥絮凝性能变好。这表明,较高的污泥相互作用能势垒和EMPS组分含量是污泥絮凝性能低的内在机制,且EMPS中蛋白质和腐殖质含量的变化是不同污泥龄污泥絮凝性能差异的主要原因。     

Ca(Ⅱ)在活性污泥生物絮凝中的作用研究

采用4个平行的序批式反应器(SBR),研究了进水Ca2+浓度对活性污泥絮体表而特性和结构稳定性的影响,并由此来确定Ca2+在生物絮凝中的作用.结果表明:随着进水Ca2+浓度的增加,污泥中的Ca含量逐渐增大.进水中Ca2+的加入,增大了污泥絮体的粒径和密度,进南改善了污泥的沉降性能;Ca2+的加入,使可供结合的蛋白质数量最高增至近1倍,污泥表面疏水性也相应增强;污泥絮凝性能的改善,主要和可供Ca2+结合的蛋白质含量增加有关,而非多糖;EDTA通过络合污泥絮体中的Ca2+,破坏了山Ca2+架桥形成的污泥絮体结构,这说明Ca2+可通过和胞外聚合物(extracellular polymeric substances,EPS)中的负电官能团架桥来促进污泥絮体的形成并维持絮体结构的稳定性.     

阳离子树脂法提取活性污泥胞外聚合物的研究

考察了树脂法提取活性污泥中胞外聚合物(extracellular polymeric substance,EPS)的影响因素,确定了最佳的提取条件.试验结果表明,树脂量60g/g VSS,振摇频率200r/min下处理4 h,EPS的提取量达到111.20 mg/L,DNA占提取量的12.13%.该方法的重现性试验结果还表明,EPS及其各成分的相对标准偏差在2.21%～6.07%之间,能较好地满足试验要求,是一种可靠的EPS提取方法.     

复合式膜生物反应器中胞外聚合物提取方法综合评价

采用高速离心法、超声法、阳离子交换树脂法(CER)、加热法4种方法提取复合式膜生物反应器(HMBR)中污泥胞外聚合物(EPS),利用化学分析方法结合三维荧光光谱法(EEM)和凝胶渗透色谱法(GPC)对4种方法进行评价.结果表明,采用60℃,30 min加热提取效果最好,而且对细胞破坏小.通过三维荧光光谱图表明4种方法对于类富里酸均有较好的提取效果;对于类腐植酸和类蛋白质,热提取法优于其他3种方法.凝胶渗透色谱法分析表明4种方法提取的EPS分子量(MW)分布变化差别不大,分子量分布范围为100～1 000 000,主要集中在100 ～ 10 000之间.     

阳离子树脂法提取活性污泥胞外聚合物的研究

考察了树脂法提取活性污泥中胞外聚合物（extracellular polymeric substance,EPS）的影响因素,确定了最佳的提取条件.试验结果表明,树脂量60g/g VSS,振摇频率200r/min下处理4 h,EPS的提取量达到111.20 mg/L,DNA占提取量的12.13%.该方法的重现性试验结果还表明,EPS及其各成分的相对标准偏差在2.21%～6.07%之间,能较好地满足试验要求,是一种可靠的EPS提取方法.     

Ca(II)在活性污泥生物絮凝中的作用研究

采用4个平行的序批式反应器(SBR),研究了进水Ca²⁺浓度对活性污泥絮体表面特性和结构稳定性的影响，并由此来确定Ca²⁺在生物絮凝中的作用。结果表明：随着进水Ca²⁺浓度的增加，污泥中的Ca含量逐渐增大。进水中Ca²⁺的加入，增大了污泥絮体的粒径和密度，进而改善了污泥的沉降性能；Ca²⁺的加入，使可供结合的蛋白质数量最高增至近1倍，污泥表面疏水性也相应增强；污泥絮凝性能的改善，主要和可供Ca²⁺结合的蛋白质含量增加有关，而非多糖；EDTA通过络合污泥絮体中的Ca²⁺，破坏了由Ca²⁺架桥形成的污泥絮体结构，这说明Ca²⁺可通过和胞外聚合物（extracellular polymeric substances, EPS）中的负电官能团架桥来促进污泥絮体的形成并维持絮体结构的稳定性。     

典型化学条件对Fe~(2+)促进消化污泥凝聚性能的影响

以消化污泥为研究对象,研究了Fe~(2+)浓度、pH和离子强度等因素对Fe~(2+)促进消化污泥凝聚性能的影响,采用扩展的DLVO理论(EDLVO)探讨了污泥絮体凝聚过程中结合能的变化特征,并对典型条件下各层胞外聚合物(EPS)的三维荧光谱图(EEM)进行了分析。结果表明:Fe~(2+)促进消化污泥凝聚的最佳化学条件为Fe~(2+)浓度50 mmol·L~(-1),pH=7.57(原始值),离子强度0.01 mol·L~(-1)。在最佳Fe~(2+)浓度或pH下,Fe~(2+)促进污泥凝聚的主要作用为:增大Zeta电位、提高絮体粒径和密实程度、增强疏水性和降低污泥絮体间的能垒;在最佳离子强度下,提高絮体粒径和密实程度是促进污泥凝聚的主要作用;离子强度的增加并未降低污泥位能曲线的能垒。EEM证明,Fe~(2+)主要与污泥EPS中slime层结合以促进污泥凝聚,主要结合物为蛋白质A、可见富里酸和紫外富里酸。     

pH对活性污泥表面特性和形态结构的影响

采用4个平行的序批式反应器,研究了不同pH下活性污泥絮体表面特性和形态结构的变化.结果表明:酸性条件下(pH=4.0,5.5)污泥产生的胞外聚合物总量较多,其中多糖和蛋白质的含量远大于中性(pH=7.0)和偏碱性条件(pH=9.0).污泥表面Zeta电位随pH的升岛而降低;pH对污泥相对疏水性的影响规律并不明显,EPS组成比例较EPS总量本身更易影响污泥表面相对疏水性;此外,在酸性条件下,丝状菌大量生长,导致污泥絮体的平均粒径增大,并且呈现双峰粒径分布,絮体分形维数较低,结构松散;在中性条件下,无明显丝状菌牛长,絮体平均粒径减小,分形维数较高,结构致密;偏碱性条件下,虽然没有出现大量丝状菌,但絮体平均粒径较中性条件略有增大,分形维数相应减小.     

不同提取方法对活性污泥胞外聚合物吸附废水中Cd(Ⅱ)效能的影响

为了比较不同提取方法对胞外聚合物(EPS)的提取及其吸附Cd(Ⅱ)的影响,考察了pH、单一物理提取方法和组合方法对脱水污泥中EPS的提取量及其对Cd(Ⅱ)的吸附能力的影响。结果表明:碱性条件在能够提高EPS提取量的同时,也能够提高EPS对Cd(Ⅱ)的吸附能力;不同物理处理方法对EPS的提取效率影响顺序为加热法超声法离心法,但其对Cd(Ⅱ)的吸附能力影响顺序为超声法离心法加热法;组合物理方法虽然较单一方法的EPS提取效率要高,但其提取EPS吸附Cd(Ⅱ)的能力较单一方法弱。以上结果可为EPS重金属吸附剂的有效提取和工业化应用提供参考。     

磺胺和四环素类抗生素对活性污泥性能的影响简

废水处理工艺中抗生素类污染物的存在可能会对生物处理过程产生长期而深远的影响，为探明此类污染物对废水生物处理主体活性污泥性能等方面的影响，采用间歇培养法研究了活性污泥法处理污水时，抗生素类污染物的存在对活性污泥性能如胞外聚合物（EPS）、污染物处理能力、脱氢酶活性和群落结构的影响。结果表明，抗生素的存在会导致活性污泥的胞外聚合物总量及其主要组分蛋白质和多糖增加，以产生保护屏障；且由于污泥絮体解体，细胞破裂导致EPS中DNA和色氨酸含量增加。同时，由于蛋白质大量增加引起的表面负电荷的增加，使污泥疏水性增强，絮凝性能恶化；污泥絮体解体导致污泥颗粒变小，SVI也随之下降；在活性污泥脱氢酶活性急剧下降的同时，出水TOC迅速升高。此外，抗生素类污染物在抑制活性污泥中大部分细菌的同时，对部分菌群也有刺激生长作用，最终导致活性污泥生物群落结构的改变。四环素类抗生素对活性污泥的EPS和絮凝沉降性能的影响大于磺胺类，而对污水处理能力和群落结构的影响则不如磺胺类。抗生素类污染物的长期存在会对活性污泥沉降性能、絮凝性能、脱氢酶活性以及活性污泥群落结构等产生一系列负面影响，进而影响污染物去除效果，导致出水水质恶化。     

次氯酸钠发生器的研制

介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠     

Estimation of uncertainty of sampling for analysis of pesticide residues

Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.     

不同泥源对厌氧氨氧化反应器启动的影响

采用2套上流式生物膜反应器,分别接种少量厌氧氨氧化污泥和大量硝化污泥,考察其对厌氧氨氧化反应器启动的影响。污泥接种入反应器后,测得接种厌氧氨氧化污泥的反应器(R1)内MLSS为0.22 g/L,另一个反应器(R2)MLSS为2.7 g/L。与直接接种厌氧氨氧化污泥相比,R1经过72 d的运行才显现出厌氧氨氧化特性。经过114 d的培养,前者氮去除速率由0.23 kg/(m3.d)提升到5.29 kg/(m3.d),总氮去除率大于89%;R2的氮去除速率由0.01 kg/(m3.d)提升到1.1 kg/(m3.d),总氮去除率大于84.6%。说明普通污泥启动需要一个较长的筛选过程,直接接种少量的厌氧氨氧化污泥比接种普通的污泥能够更快启动厌氧氨氧化反应器。     

Evaluation of the presence of drugs of abuse in tap waters

A total of seventy samples of drinking water were tested for non-controlled and illicit drugs. Of these, 43 were from Spanish cities, 15 from seven other European countries, three from Japan and nine from seven different Latin American countries. The most frequently detected compounds were caffeine, nicotine, cotinine, cocaine and its metabolite benzoylecgonine, methadone and its metabolite EDDP. The mean concentrations of non-controlled drugs were: for caffeine 50 and 19 ng L⁻¹, in Spanish and worldwide drinking water respectively and for nicotine 13 and 19 ng L⁻¹. Illicit drugs were sparsely present and usually at ultratrace level (<1 ng L⁻¹). For example, cocaine has mean values of 0.4 (Spain) and 0.3 ng L⁻¹ (worldwide), whereas for benzoylecgonine, these mean values were 0.4 and 1.8 ng L⁻¹, respectively. Higher concentrations of benzoylecgonine were found in Latin American samples (up to 15 ng L⁻¹). No opiates were identified in any sample but the presence of methadone and EDDP was frequently detected. Total mean values for EDDP were 0.4 ng L⁻¹ (Spain) and 0.3 ng L⁻¹ (worldwide). Very few samples tested positive for amphetamines, in line with the reactivity of chlorine with these compounds. No cannabinoids, LSD, ketamine, fentanyl and PCP were detected.     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

Mechanisms of biodegradation of dibenzoate plasticizers

Biodegradation mechanisms were elucidated for three dibenzoate plasticizers: diethylene glycol dibenzoate (D(EG)DB), dipropylene glycol dibenzoate (D(PG)DB), both of which are commercially available, and 1,6-hexanediol dibenzoate, a potential green plasticizer. Degradation studies were done using Rhodococcus rhodochrous in the presence of pure alkanes as a co-substrate. As expected, the first degradation step for all of these systems was the hydrolysis of one ester bond with the release of benzoic acid and a monoester. Subsequent biodegradation of the monobenzoates of diethylene glycol (D(EG)MB) and dipropylene glycol (D(PG)MB) was very slow, leading to significant accumulation of these monoesters. In contrast, 1,6-hexanediol monobenzoate was quickly degraded and characterization of the metabolites indicated that the biodegradation proceeded by way of the oxidation of the alcohol group to generate 6-(benzoyloxy) hexanoic acid followed by β-oxidation steps. This pathway was blocked for D(EG)MB and D(PG)MB by the presence of an ether function.The use of a pure hydrocarbon as a co-substrate resulted in the formation of another class of metabolites; namely the esters of the alcohols formed by the oxidation of the alkanes and the benzoic acid released by hydrolysis of the original diesters. These metabolites were biodegraded without the accumulation of any intermediates.     

混凝试验搅拌器的研制

影响混凝效果的因素众多,混凝沉淀烧杯试验是进行水的混合、絮凝、沉淀工艺研究、设计和生产指导的最有效方法之一,阐述了智能型混凝试验搅拌器的设计原理和技术性能.     

产油微藻培养与回收的关键技术研究进展

寻找廉价而高效的替代原料是实现生物柴油产业化的关键所在.微藻以含油量高、生长周期短、环境适应能力强、生物产量高等优点,有望成为一种极具潜力的生物柴油生产原料.然而,目前尚存在微藻培养低效成本高和微藻回收效率低两大难题.综述了微藻培养与回收过程中的关键技术,并对存在的两大难题及其改进技术进行了详细的探讨.最后,总结并展望了微藻培养、回收技术未来的发展趋势.     

生物质快速热裂解主要参数对生物油产率的影响

以松木木屑为原料,在自制的小型流化床上,开展了生物质热裂解温度、生物质粒径和进料速率对生物油产率的影响实验研究.结果表明,在热裂解温度分别为450、475、500、525和550℃条件下,当热裂解温度为500℃时,生物油产率最高,平均产率达到53.33%（质量百分比）.反应温度越高,炭产量越低,不可冷凝气体产量越高,气体发热值越高;粒径＜1 mm的生物质其粒径对生物油产率影响不大;生物质进料速率增加时,生物油产率增加.本研究为生物能的利用提供了新的途径.     

造纸废水混凝处理中SFT助凝替代性研究

中小造纸厂废水处理常用PAC作混凝剂 ,PAM作助凝剂。由于PAM成本很高 ,影响了处理设备的投运率。用超细滑石粉 (SFT)替代PAM助凝 ,与混凝剂PAC配合 ,其混凝处理效果基本相当 ,但是处理成本降低 0 .10元 /m3 。由于SFT属环境无害材料 ,不会给排泥带来二次污染