Simplified Methods for Statistical Interpretation of Monitoring Data

Statistical techniques are useful for interpretation of monitoring data for pollutants, process variables, etc. Simplified nomographical methods are presented for relating numbers of samples to confidence intervals for their mean values, and for determining the proportion of the population exceeding a specified concentration and confidence intervals for the proportion. A chart also is given for design of a sampling program for quality control. Illustrative frequency distribution data are given for hourly-averaged methane concentrations in air over three-week periods. They show trimodal lognormal distributions. These charts are applicable to lognormal distributions, as well as to normal distributions. They are convenient for many common problems.     

Boiler briquette coal versus raw coal: Part I--Stack gas emissions

Stack gas emissions were characterized for a steam-generating boiler commonly used in China. The boiler was tested when fired with a newly formulated boiler briquette coal (BB-coal) and when fired with conventional raw coal (R-coal). The stack gas emissions were analyzed to determine emission rates and emission factors and to develop chemical source profiles. A dilution source sampling system was used to collect PM on both Teflon membrane filters and quartz fiber filters. The Teflon filters were analyzed gravimetrically for PM10 and PM2.5 mass concentrations and by X-ray fluorescence (XRF) for trace elements. The quartz fiber filters were analyzed for organic carbon (OC) and elemental carbon (EC) using a thermal/optical reflectance technique. Sulfur dioxide was measured using the standard wet chemistry method. Carbon monoxide was measured using an Orsat combustion analyzer. The emission rates of the R-coal combustion (in kg/hr), determined using the measured stack gas concentrations and the stack gas emission rates, were 0.74 for PM10, 0.38 for PM2.5, 20.7 for SO2, and 6.8 for CO, while those of the BB-coal combustion were 0.95 for PM10, 0.30 for PM2.5, 7.5 for SO2, and 5.3 for CO. The fuel-mass-based emission factors (in g/kg) of the R-coal, determined using the emission rates and the fuel burn rates, were 1.68 for PM10, 0.87 for PM2.5, 46.7 for SO2, and 15 for CO, while those of the BB-coal were 2.51 for PM10, 0.79 for PM2.5, 19.9 for SO2, and 14 for CO. The task-based emission factors (in g/ton steam generated) of the R-coal, determined using the fuel-mass-based emission factors and the coal/steam conversion factors, were 0.23 for PM10, 0.12 for PM2.5, 6.4 for SO2, and 2.0 for CO, while those of the BB-coal were 0.30 for PM10, 0.094 for PM2.5, 2.4 for SO2, and 1.7 for CO. PM10 and PM2.5 elemental compositions are also presented for both types of coal tested in the study.     

Influence of reactor configuration on reliability of activated sludge process

The effect of uncertainty in system parameters and the accuracy of the mathematical model used on the design and reliability of the activated sludge process is investigated by Monte Carlo simulations. Simulations indicate that the coefficient of variation for a reactor volume varies from 0.56 for a single mixed tank reactor to 0.44 for a plug flow reactor. The coefficient of variation for effluent for reactors designed on nominal values was found to be 0.56 for a mixed-tank reactor, 1.28 for two reactors in series, 1.56 for three reactors in series and 1.6 for a plug flow reactor. Significant contributing parameters to the reliability of the process are established. Reactor volumes for desired reliability levels are also calculated.     

Effect of common food preservatives on mycelial growth and spore germination of Fusarium oxysporum

The growth and spore germination inhibition of Fusarium oxysporum f.sp. radicis-cucumerinum by the common food additives: acetic acid, formic acid potassium sorbate, propionic acid, sorbic acid, and the fungistatic agent sec-butylamine was examined in vitro. The inhibitory efficacy of these chemicals decreased in the following order: sorbic acid, potassium sorbate, propionic acid, acetic acid, sec-butylamine and formic acid. At pH 6.4, the ED50 value for mycelium growth was: 976 ppm for sorbic acid, 1292 ppm for potassium sorbate, 2435 ppm for propionic acid, 3805 ppm for acetic acid, 3962 ppm for sec butylamine and 4668 ppm for formic acid. The ED50 value for spore germination was: 225 ppm for potassium sorbate, 1201 ppm for sorbic acid, 1402 ppm for propionic acid, 1600 ppm for sec-butylamine, 1957 ppm for acetic acid and 2485 ppm for formic acid.     

Accumulation and excretion of organophosphorous pesticides by willow shiner

Bioconcentration and excretion of 8 organophosphorous pesticides were studied for willow shiner ( ). The average bioconcentration factors (BCF) in the whole body of the fish after 24 – 168 hr exposure were 0.8 for dichlorvos, 76 for salithion, 18 for methidathion, 29 for pyridaphenthion, 481 for fenthion and 36 for phosmet, Further, the BCF values of the other pesticides after 168 hr exposure were 713 for phenthoate and 1682 for EPN. The correlation between n-octanol-water partition coefficients (P_OW) and BCF in willow shiner was investigated for 19 pesticides studied here and already reported. The correlation factor (r) was not so high (0.6819, n=19) but higher (0.9085, n=18) in case excluding captan. The excretion rate constants (k) from the whole body of willow shiner were 0.20 hr⁻¹ for salthion, 0.05 hr⁻¹ for phenthoate, 0.27 hr⁻¹ for methidathion, 0.20 hr⁻¹ for pyridaphenthion, 0.07 hr⁻¹ for fenthion, 0.04 hr⁻¹ for EPN and 0.28 hr⁻¹ for phosmet.     

A gas chromatography/high-resolution mass spectrometry (GC/HRMS) method for determination of polybrominated diphenyl ethers in fish

A method for the determination of polybrominated diphenyl ethers (PBDEs) in biota for routine analysis is described. The mass spectroscopic (MS) evaluation of 23 brominated diphenyl ethers, under electron ionization and electron capture negative ion conditions using magnetic sector and quadrupole mass spectrometers, showed that high-resolution mass spectrometry (HRMS) under electron ionization conditions was the most reliable technique, with high selectivity and adequate sensitivity. The instrument detection limit for this method ranged for individual congeners between 4.8 and 0.1 pg for 3-bromodiphenyl ether (BDE-2) and 2,3',4,4'-tetrabromodiphenyl ether (BDE-66), respectively, and method detection limit for each homologue group ranged between 5 pg/g for salmon certified reference material (CRM) and 93 pg/g for lake trout CRM. The effectiveness of this method was evaluated by analyzing the occurrence of PBDEs in commercially available CRMs comprising Lake Ontario lake trout, Pacific herring, and sockeye salmon. The average coefficients of variation for the replicate analyses of PDBEs in several tissue samples were: 25% for lake trout, 36% for Pacific herring, and 34% for sockeye salmon. The average deviations in the inter-laboratory study were: 14% for lake trout, 15% for Pacific herring, and 37% for sockeye salmon. Results indicated that the described method, based on gas chromatography/high-resolution mass spectrometry, is reliable for determining PBDE concentrations in biological tissues.     

Considerations in Setting Standards for Oxides of Nitrogen

Since 1959 the California Department of Public Health has held responsibility for setting standards for ambient air quality and for motor vehicle emissions. The need for standards for oxides of nitrogen involves consideration both of direct effects and effects resulting from participation in photochemical smog reactions. This paper discusses the various effects of concern and describes the department’s program for establishing air quality standards which will become the basis for vehicle emission standards and serve as guides for control of other sources of oxides of nitrogen.     

Effect of common food preservatives on mycelial growth and spore germination of Fusarium oxysporum

Abstract

The growth and spore germination inhibition of Fusarium oxysporum f.sp. radicis‐cucumerinum by the common food additives: acetic acid, formic acid potassium sorbate, propionic acid, sorbic acid, and the fungistatic agent sec‐butylamine was examined in vitro. The inhibitory efficacy of these chemicals decreased in the following order: sorbic acid, potassium sorbate, propionic acid, acetic acid, sec‐butylamine and formic acid. At pH 6.4, the ED₅₀ value for mycelium growth was: 976 ppm for sorbic acid, 1292 ppm for potassium sorbate, 2435 ppm for propionic acid, 3805 ppm for acetic acid, 3962 ppm for sec butylamine and 4668 ppm for formic acid. The ED₅₀ value for spore germination was: 225 ppm for potassium sorbate, 1201 ppm for sorbic acid, 1402 ppm for propionic acid, 1600 ppm for sec‐butylamine, 1957 ppm for acetic acid and 2485 ppm for formic acid.     

Marine nature conservation and conflicts with fisheries

Globally, conflicts between marine nature conservation and fishery interests are common and increasing, and there is often a glaring lack of dialogue between stakeholders representing these two interests. There is a need for a stronger and enforced coordination between fishing and conservation authorities when establishing marine protected areas for conservation purposes. We propose that an appropriate instrument for such coordination is a broad ecosystem-based marine spatial planning procedure, representing neither nature conservation nor fishery. Strategic environmental assessment for plans and programmes and environmental impact assessment for projects are commonly used tools for assessing the environmental impacts of different human activities, but are seldom used for evaluating the environmental effects of capture fisheries. The diversity of fisheries and the drastic effects of some fisheries on the environment are strong arguments for introducing these procedures as valuable supplements to existing fisheries assessment and management tools and able to provide relevant environmental information for an overall marine spatial planning process. Marine protected areas for nature conservation and for protection of fisheries have different objectives. Therefore, the legal procedure when establishing marine protected areas should depend on whether they are established for nature conservation purposes or as a fisheries resource management tool. Fishing in a marine protected area for conservation purpose should be regulated according to conservation law. Also, we argue that marine protected areas for conservation purposes, in the highest protection category, should primarily be established as fully protected marine national parks and marine reserves.     

Biosorption characteristics of copper (II), chromium (III), nickel (II), and lead (II) from aqueous solutions by Chara sp. and Cladophora sp.

The aim of this research was to expose individual removals of copper, chromium, nickel, and lead from aqueous solutions via biosorption using nonliving algae species, Chara sp. and Cladophora sp. Optimum pH values for biosorption of copper (II), chromium (III), nickel (II), and lead (II) from aqueous solutions were determined to be 6, 7, 7, and 3 for Cladophora sp. and 5, 3, 5, and 4 for Chara sp. respectively. Maximum adsorption capacities of Chara sp. [10.54 for chromium (III) and 61.72 for lead (II)] and Cladophora sp. [6.59 for chromium (III) and 16.75 and 23.25 for lead (II)] for chromium (III) and lead (II) are similar. On the other hand, copper (II) and nickel (II) biosorption capacity of Cladophora sp. [14.28 for copper (II) and 16.75 for nickel (II)] is greater than Chara sp. [6.506 for copper (II) and 11.76 for nickel (II)]. Significantly high correlation coefficients indicated for the Langmuir adsorption isotherm models can be used to describe the equilibrium behavior of copper, chromium, nickel, and lead adsorption onto Cladophora sp. and Chara sp.     

Uptake of aromatic hydrocarbon vapors (benzene and phenanthrene) at the air-water interface of micron-size water droplets

Uptake of aromatic hydrocarbon vapors (benzene and phenanthrene) by typical micrometer-sized fog-water droplets was studied using a falling droplet reactor at temperatures between 296 and 316 K. Uptake of phenanthrene vapor greater than that predicted by bulk (air-water)-phase equilibrium was observed for diameters less than 200 microm, and this was attributed to surface adsorption. The experimental values of the droplet-vapor partition constant were used to obtain the overall mass transfer coefficient and the mass accommodation coefficient for both benzene and phenanthrene. Mass transfer of phenanthrene was dependent only on gas-phase diffusion and mass accommodation at the interface. However, for benzene, the mass transfer was limited by liquid-phase diffusion and mass accommodation. A large value of the mass accommodation coefficient, alpha = (1.4 +/- 0.4) x 10(-2) was observed for the highly surface-active (hydrophobic) phenanthrene, whereas a small alpha = (9.7 +/- 1.8) x 10(-5) was observed for the less hydrophobic benzene. Critical cluster numbers ranging from 2 for benzene to 5.7 for phenanthrene were deduced using the critical cluster nucleation theory for mass accommodation. The enthalpy of mass accommodation was more negative for phenanthrene than it was for benzene. Consequently, the temperature effect was more pronounced for phenanthrene. A linear correlation was observed for the enthalpy of accommodation with the excess enthalpy of solution. A natural organic carbon surrogate (Suwannee Fulvic acid) in the water droplet increased the uptake for phenanthrene and benzene, the effect being more marked for phenanthrene. A characteristic time constant analysis showed that uptake and droplet scavenging would compete for the fog deposition of phenanthrene, whereas deposition would be unimpeded by the uptake rate for benzene vapor. For both compounds, the characteristic atmospheric reaction times were much larger and would not impact fog deposition.     

Spatial surrogates for the disaggregation of CORINAIR emission inventories

CORINAIR atmospheric emission inventories are frequently used input data for air quality models with a domain situated in Europe. In CORINAIR emission inventories, sources are broken down over 11 major source categories. This paper presents spatial surrogates for the disaggregation of CORINAIR atmospheric emission inventories for input of air pollutants and particulate matter to grid or polygon based air quality model domains inside Europe. The basis for the disaggregation model was the CLC2000 land cover data to which statistical weights were added. Weights were population census data for residential emissions, employment statistics for agricultural and industrial area emissions, livestock statistics for ammonia emissions and annual aircraft movements for emissions realized by air transport. Additional road and off-road network information was used to disaggregate emissions realized by traffic. A comparison of top down produced emission estimates with spatially resolved national emission data for The Netherlands and the United Kingdom gave confidence in the present spatial surrogates as a tool for the top down production of atmospheric emission maps. Explained variance at a spatial resolution of 5 km was >70% for CO, NMVOC and NO_x, >60% for PM10 and almost 50% for SO₂.     

Sorption of PAHs and PCBs to activated carbon: coal versus biomass-based quality

The addition of activated carbon (AC) is an increasingly popular method for pollutant immobilization, and the AC material can be made of biomass or coal/fossil feedstock. The aim of the present study was to investigate whether there are differences between pollutant sorption to biomass and coal-based AC in the presence and absence of sediment. Through N₂ and CO₂ adsorption to probe surface area and pore size it was shown that the biomass-based AC had a stronger dominance of narrow pores in the size range 3.5-15 Å than the anthracite-based material. In the absence of sediment, sorption isotherms for the probe compounds pyrene and PCB-101 showed stronger sorption for the biomass-based AC (logarithmic Freundlich coefficients 8.15 for pyrene; 9.91 for PCB-101) than for the anthracite-based one (logarithmic Freundlich coefficients 7.20 and 9.70, respectively). In the presence of sediment, the opposite trend was observed, with the stronger sorption for anthracite-based AC. Thus, the presence of competing and/or pore-blocking sediment constituents reduces sorption to a larger extent for biomass-derived AC (factor of 5 for pyrene to almost 100 for PCB-101) than for anthracite-based AC (no reduction for pyrene to factor of 5 for PCB-101). This difference is tentatively attributed to the difference in pore size distribution, narrow pores being more prone to clogging, and could have implications for remediation feasibility with AC from different sources.     

Levels of some polybrominated diphenyl ether (PBDE) flame retardants along the Dutch coast as derived from their accumulation in SPMDs and blue mussels (Mytilus edulis)

Aqueous concentrations of individual brominated diphenyl ethers (BDEs) were determined for five stations in the Scheldt estuary and the North Sea along the Dutch coast using passive sampling by semipermeable membrane devices (SPMDs). Values of 0.1-5 pg l(-1) were observed. The highest levels were found in the Scheldt estuary. Concentration differences between February and October were a factor of 4-8 for BDE209, and were smaller than a factor of 2 for the other BDEs. Bioaccumulation was studied for native mussels and for mussels that were transplanted from an uncontaminated area into the Scheldt estuary for 6 weeks. Concentrations in native mussels were higher by a factor of 10 and 2 for BDEs and PCBs, respectively. Field based bioaccumulation factors (BAFs) were higher for BDEs than for PCBs by a factor of 10. Depuration experiments showed that the larger part of the BDE209 content in mussels was associated with ingested particles, whereas no such effect was observed for the other BDEs or PCBs.     

Sorption, degradation and mobility of microcystins in Chinese agriculture soils: Risk assessment for groundwater protection

In the present paper, sorption, persistence, and leaching behavior of three microcystin variants in Chinese agriculture soils were examined. Based on this study, the values of capacity factor and slope for three MCs variants in three soils ranged from 0.69 to 6.00, and 1.01 to 1.54, respectively. The adsorption of MCs in the soils decreased in the following order: RR > Dha7 LR > LR. Furthermore, for each MC variant in the three soils, the adsorption rate in the soils decreased in the following order: soil A > soil C > soil B. The calculated half-time ranged between 7.9 and 17.8 days for MC-RR, 6.0-17.1 days for MC-LR, and 7.1-10.2 days for MC-Dha7 LR. Results from leaching experiments demonstrated that recoveries of toxins in leachates ranged from 0-16.7% for RR, 73.2-88.9% for LR, and 8.9-73.1% for Dha7 LR. The GUS value ranged from 1.48 to 2.06 for RR, 1.82-2.88 for LR, and 1.76-2.09 for Dha7 LR. Results demonstrated the use of cyanobacterial collections as plant fertilizer is likely to be unsafe in soils.     

Simultaneous determination of imidacloprid, thiacloprid, and thiamethoxam in soil and water by high-performance liquid chromatography with diode-array detection

A high-performance liquid chromatography method with diode-array detection (HPLC-DAD) is described for the determination of three neonicotinoid insecticides imidacloprid, thiacloprid, and thiamethoxam in soil and water. The soil samples were extracted with acetonitrile, while the water samples were extracted using C18 cartridges. The mean recoveries plus standard deviations for spiked soil samples were 82 +/- 4.2% for thiamethoxam, 99 +/- 4.2% for imidacloprid and 94 +/- 1.4% for thiacloprid. The recoveries for water samples ranged from 87 +/- 3.4% for thiamethoxam to 97 +/- 3.9% for imidacloprid and 97 +/- 2.6% for thiacloprid. The limits of quantitation (LOQ) were 0.1, 0.1, 0.01 mg/kg in soil (5g), and 2, 2, 0.5, micro/L in water (50 mL) for thiamethoxam, imidacloprid, and thiacloprid, respectively.     

First report on development of quantitative interspecies structure-carcinogenicity relationship models and exploring discriminatory features for rodent carcinogenicity of diverse organic chemicals using OECD guidelines

Different regulatory agencies in food and drug administration and environmental protection worldwide are employing quantitative structure-activity relationship (QSAR) models to fill the data gaps related with properties of chemicals affecting the environment and human health. Carcinogenicity is a toxicity endpoint of major concern in recent times. Interspecies toxicity correlations may provide a tool for estimating sensitivity towards toxic chemical exposure with known levels of uncertainty for a diversity of wildlife species. In this background, we have developed quantitative interspecies structure-carcinogenicity correlation models for rat and mouse [rodent species according to the Organization for Economic Cooperation and Development (OECD) guidelines] based on the carcinogenic potential of 166 organic chemicals with wide diversity of molecular structures, spanning a large number of chemical classes and biological mechanisms. All the developed models have been assessed according to the OECD principles for the validation of QSAR models. Consensus predictions for carcinogenicity of the individual compounds are presented here for any one species when the data for the other species are available. Informative illustrations of the contributing structural fragments of chemicals which are responsible for specific carcinogenicity endpoints are identified by the developed models. The models have also been used to predict mouse carcinogenicities of 247 organic chemicals (for which rat carcinogenicities are present) and rat carcinogenicities of 150 chemicals (for which mouse carcinogenicities are present). Discriminatory features for rat and mouse carcinogenicity values have also been explored.     

Comparison of the effects of seleno-L-methionine, seleno-DL-methionine, and selenized yeast on reproduction of mallards

The toxicities of seleno-L-methionine, seleno-DL-methionine, and selenized yeast were compared. Ten pairs of mallards were fed a control diet and 15 pairs were fed diets containing 10 ppm selenium as seleno-DL-methionine, seleno-L-methionine, or selenized yeast. Hatching of fertile eggs was significantly lower for females fed 10 ppm selenium as seleno-DL-methionine (7.6%) and seleno-L-methionine (6.4%) than for controls (41.3%). Survival of ducklings was lower when their parents had been fed 10 ppm selenium as seleno-L-methionine (20.0%) than for controls (98.4%). The number of 6-day-old ducklings produced per female was significantly lower for mallards fed 10 ppm selenium as seleno-DL-methionine (0.47) or selenized yeast (2.67) than for controls (6.10), and was significantly lower for mallards fed seleno-L-methionine (0.13) than for mallards fed selenized yeast. The eighth eggs of females fed the DL or L forms of selenomethionine contained means of 9.2 and 8.9 ppm selenium, wet weight; these means were higher than the mean (6.6 ppm) for females fed selenized yeast. Among embryos that died at 7 days of age or older, the percentage of embryos that were deformed was 1.3% for controls, 24.6% for seleno-DL-methionine, 28.2% for seleno-L-methionine, and 11.0% for selenized yeast. The results suggested that seleno-DL-methionine and seleno-L-methionine were of similar toxicity and were both more toxic than selenium from selenized yeast.     

Persistent organic pollutants in soils and sediments from James Ross Island, Antarctica

Soil and sediment samples from James Ross Island were analyzed for their PCB, OCP and PAH contents. Soil concentrations ranged between 0.51 and 1.82 ng g(-1) for seven indicator PCB congeners, between 0.49 and 1.34 ng g(-1) for HCH congeners, between 0.51 and 3.68 ng g(-1) for the sum of p,p'-DDT, DDE, and DDD, and between 34.9 and 171 ng g(-1) for the sum of 16 EPA PAHs. Sediment levels from 0.32 to 0.83 ng g(-1) were found for PCBs, from 0.14 to 0.76 ng g(-1) for HCHs, from 0.19 to 1.15 ng g(-1) for DDTs, and from 1.4 to 205 ng g(-1) for PAHs. A prevalence of low-mass PAHs, less chlorinated PCBs, and more volatile chemicals indicates that the long-range atmospheric transport from populated areas of Africa, South America, and Australia is the most probable contamination source for the solid matrices in James Ross Island.     

Uptake of Aromatic Hydrocarbon Vapors (Benzene and Phenanthrene) at the Air-Water Interface of Micron-Size Water Droplets

Abstract

Uptake of aromatic hydrocarbon vapors (benzene and phenanthrene) by typical micrometer-sized fog-water droplets was studied using a falling droplet reactor at temperatures between 296 and 316 K. Uptake of phenan-threne vapor greater than that predicted by bulk (air-water)-phase equilibrium was observed for diameters less than 200 μm, and this was attributed to surface adsorption. The experimental values of the droplet-vapor partition constant were used to obtain the overall mass transfer coefficient and the mass accommodation coefficient for both benzene and phenanthrene. Mass transfer of phenanthrene was dependent only on gas-phase diffusion and mass accommodation at the interface. However, for benzene, the mass transfer was limited by liquid-phase diffusion and mass accommodation. A large value of the mass accommodation coefficient, α = (1.4 ± 0.4) × 10^?2 was observed for the highly surface-active (hydrophobic) phenanthrene, whereas a small α = (9.7 ± 1.8) × 10^?5 was observed for the less hydrophobic benzene. Critical cluster numbers ranging from 2 for benzene to 5.7 for phenanthrene were deduced using the critical cluster nucleation theory for mass accommodation. The enthalpy of mass accommodation was more negative for phenanthrene than it was for benzene. Consequently, the temperature effect was more pronounced for phenanthrene. A linear correlation was observed for the enthalpy of accommodation with the excess enthalpy of solution. A natural organic carbon surrogate (Suwannee Fulvic acid) in the water droplet increased the uptake for phenanthrene and benzene, the effect being more marked for phenanthrene. A characteristic time constant analysis showed that uptake and droplet scavenging would compete for the fog deposition of phenanthrene, whereas deposition would be unimpeded by the uptake rate for benzene vapor. For both compounds, the characteristic atmospheric reaction times were much larger and would not impact fog deposition.