Solid‐phase extraction and GC analyses of select agricultural pesticides and metabolites in stream water

Abstract

The occurrence of agricultural pesticides in surface waters around the USA has created a concern over the status of safe drinking water. Solid‐phase extraction (SPE) or liquid‐liquid extraction (LLE) is usually employed to concentrate trace levels of pesticides in water samples to concentrations that are measurable with advanced chromatographic instruments. We describe here a SPE and capillary gas chromatographic (GC) procedure to extract and concentrate trace levels of select agricultural pesticides and metabolites from stream water. Our SPE and GC method provides high sensitivity, with recoveries between 85% to 95%, and high reproducibility for 9 of the pesticides studied. The described method provided marginal recoveries of 19 and 60% for the atrazine metabolites.     

Evaluation of C18 solid‐phase extraction cartridges for the isolation of select pesticides and metabolites

Abstract

Nine different C₁₈ solid‐phase extraction (SPE) cartridges were evaluated for their efficiency at extracting nine pesticides and two s‐triazine metabolites from spiked deionized water samples. The SPE cartridges were found to contain nitrogen (N) and/or phosphorus (P) contaminants and varied in their extraction efficiency for certain pesticides and metabolites. Four of the nine SPE cartridges gave acceptable (70 to 120%) pesticide and metabolite recovery percentages, while five cartridges had marginal (50 to 70%) to poor (< 50%) recoveries. Statistical analyses showed that the poor to marginal recoveries found for three compounds could not be explained by considering several indigenous chemical and physical traits of the cartridge. It is suggested that proper SPE cartridge selection for pesticide recovery should be evaluated using several different cartridges.     

Determination of pharmaceuticals, personal care products, and pesticides in surface and treated waters: method development and survey

Water is fundamental to the existence of life since it is essential to a series of activities, such as agriculture, power generation, and public and industrial supplies. The residual water generated by these activities is released into the environment, reaches the water systems, and becomes a potential risk to nontarget organisms. This paper reports the development and validation of a quantitative method, based on solid-phase extraction and liquid chromatography tandem mass spectrometry, for the simultaneous analysis of 18 pharmaceuticals and personal care products (PPCPs) and 33 pesticides in surface and drinking waters. The accuracy of the method was determined by calculating the recoveries, which ranged from 70 to 120 % for most pesticides and PPCPs, whereas limits of quantification ranged from 0.8 to 40 ng/L. After the validation step, the method was applied to drinking and surface waters. Pesticides and PPCPs were found in concentrations lower than 135.5 ng/L. The evaluation of different water sources with regard to contamination by pesticides and PPCPs has been quite poor in southern Brazil.     

Multiresidue analysis and monitoring of pesticides in rice by pressurized liquid extraction

The aim of this study was to assess the performance of a method of analyzing pesticides in rice by using pressurized liquid extraction (PLE) and to perform a preliminary monitoring by using that method. The instrumental quantification limit, instrumental detection limit, method quantification limit, and method detection limit were determined. PLE temperature was also optimized for 6 target pesticides. Mean recoveries of spiked rice with target pesticides (4 ng/g and 40 ng/g) were 83%–109% with the repeatability of the analysis, represented as relative standard deviations, ranged from 1.3% to 11% (n = 5) for PLE at 130°C. These results were satisfactory according to the method of positive list in Japan. In a preliminary analysis of 10 target pesticides in 54 commercial rice samples, ferimzone was detected in only one unpolished rice sample.     

Screening of compost for PAHs and pesticides using static subcritical water extraction.

Static subcritical water extraction (SubWE) along with solid phase extraction (SPE) was used for the analysis of PAHs and pesticides in municipal solid waste compost. Yields obtained for PAHs in certified reference sediment (CRM 104) were acceptable. The extraction method was simple, rapid, used small sample sizes, and no sample drying was required. Analysis of samples was performed by GC/MS and HPLC. Recovery of spiked pesticides was greatest at 110 degrees C for 20 min extraction time. The optimum extraction for PAH analysis was achieved at 150 degrees C for 20 min. Addition of C-18 resin as an "alternate sorbent" upon cooling increased recovery of PAHs but not of pesticides, however, it increased the stability of atrazine and propazine at higher temperatures. Analysis of three municipal compost samples from the Dayton, OH (USA) area showed no pesticides above the detection limit, however, PAH totals for 11 PAHs were 15.97, 14.42, and 20.79 microg g(-1). The totals of six of the seven carcinogenic PAHs, for which remediation goals in the United States is 4.6 microg g(-1), were determined to be 9.89, 6.77, and 13.06 microg g(-1) dry weight. The highest PAH totals were obtained from compost containing sewage sludge.     

Pesticide residues in rivers of a Brazilian Rain Forest Reserve: assessing potential concern for effects on aquatic life and human health

Pesticide residues in water, sediment, and fish samples from rivers of a Brazilian Rain Forest Reserve were measured in November 1998, March 1999, and January 2000. Concentrations of the individual pesticides were compared to ecotoxicological benchmarks based on acute toxicity tests, and to regulatory guidelines to determine the potential concern for effects on aquatic life and human health. Pesticides and metabolites were detected at all 7 sites surveyed. Residues of a total of 27 pesticides or metabolites were found in water and/or sediment samples and fish have accumulated some of the most persistent of these residues. Measured concentrations in water and sediment indicated concern for preservation of aquatic fauna. Several pesticides in water were above levels for drinking water recommended by Brazilian and/or European Union authorities, indicating also a concern for human health.     

Multiresidue analysis of organophosphate and pyrethroid pesticides in duplicate-diet solid food by pressurized liquid extraction

An analytical method was developed for determining organophosphate pesticides (OPP) and pyrethroid pesticides (PYR) in duplicate-diet solid food. The method consisted of pressurized liquid extraction (PLE) with dichloromethane followed by cleanup with gel permeation and solid phase extraction columns and gas chromatography/mass spectrometry (GC/MS) analysis. Quantitative recoveries (73–117 %) of the target pesticides were obtained for spiked duplicate-diet food samples. The percent standard deviation (% RSD) of replicate food samples was within ± 20 %. Another method was developed for determining a common OPP metabolite, 3, 5, 6-trichloro-2-pyridinol (TCP) in duplicate-diet food. The method consisted of a PLE with methanol followed by liquid-liquid partitioning, derivatization, and GC/MS analysis. Recoveries of TCP ranged from 83 to 101 % for spiked duplicate-diet food samples. The % RSD of replicate food samples was within ± 15 %. The results confirmed that these methods are reliable and robust, and that they can be used in routine analysis. In addition, a storage stability study for a common OPP, chlorpyrifos (CPF), in solid food samples was performed. The fortified ¹⁵N-¹³C-labeled CPF was stable over 16 mo storage at ?20° C in the dark. The developed analytical methods were successfully applied to 278 duplicate-diet food samples from preschool children, demonstrating that these methods are robust and suitable for routine analysis in future exposure monitoring studies.     

Multiresidue analysis of organophosphate and pyrethroid pesticides in duplicate-diet solid food by pressurized liquid extraction

An analytical method was developed for determining organophosphate pesticides (OPP) and pyrethroid pesticides (PYR) in duplicate-diet solid food. The method consisted of pressurized liquid extraction (PLE) with dichloromethane followed by cleanup with gel permeation and solid phase extraction columns and gas chromatography/mass spectrometry (GC/MS) analysis. Quantitative recoveries (73-117 %) of the target pesticides were obtained for spiked duplicate-diet food samples. The percent standard deviation (% RSD) of replicate food samples was within ± 20 %. Another method was developed for determining a common OPP metabolite, 3, 5, 6-trichloro-2-pyridinol (TCP) in duplicate-diet food. The method consisted of a PLE with methanol followed by liquid-liquid partitioning, derivatization, and GC/MS analysis. Recoveries of TCP ranged from 83 to 101 % for spiked duplicate-diet food samples. The % RSD of replicate food samples was within ± 15 %. The results confirmed that these methods are reliable and robust, and that they can be used in routine analysis. In addition, a storage stability study for a common OPP, chlorpyrifos (CPF), in solid food samples was performed. The fortified (15)N-(13)C-labeled CPF was stable over 16 mo storage at -20° C in the dark. The developed analytical methods were successfully applied to 278 duplicate-diet food samples from preschool children, demonstrating that these methods are robust and suitable for routine analysis in future exposure monitoring studies.     

Simultaneous analysis of 50 pesticides in water samples by solid phase extraction and GC-MS

A multiresidue analysis of 50 pesticides has been developed as a rapid screening method for organic contaminants in water samples. Solid phase extraction was accomplished with two adsorbents in a single column. Simultaneous analysis was performed with gas chromatography-mass spectrometry (GC-MS). The limits of detection for each pesticide are at sub-ppb levels. This method was used to check contamination of water from the Adige river (Northern Italy).     

Sample preparation for GC analysis of selected pesticides in surface water.

A new isolation procedure for the determination of nitrogen/phosphorous containing pesticides and organochlorine pesticides in water was tested, and statistical evaluation of the recoveries was performed. The procedure, designed specifically for the analysis of semi-volatile compounds in water containing Suspended Particulate Matter (SPM), utilizes a specially designed filtration vessel coupled directly to an SPE cartridge. The studies were based on surface water samples (from the Vistula River) spiked with pesticides. SPM separation and analyte isolation/concentration were carried out in a special filtration vessel. Pesticides were sorbed both on the SPE cartridge and on the suspended matter. The cartridge and the filter with the suspended matter were extracted separately with a solvent, which enabled the determination of analyte distribution between the two. For organochlorine pesticides, between 3 and 60% of the initial amount was found on the filter, while the recoveries in the filtrate ranged from 30 to 98%. Total recoveries of organochlorine pesticides from surface water samples spiked with pesticides using the method described were high, ranging from 90 to 101%. The amounts of nitrogen/phosphorus containing pesticides recovered from the filter were lower than 2%, while those from the filtrate ranged from 69 to 92%. Total recoveries of nitrogen/phosphorus containing pesticides from surface water samples were high, ranging from 71 to 92%.     

Transfer of pesticides to the brew during mate drinking process and their relationship with physicochemical properties

In order to evaluate the extraction of pesticide residues that are transferred to the brew during mate drinking process of P.U.1 yerba mate leaves (Ilex paraguariensis), a special device to simulate the way in which mate is drunk in Uruguay was developed. The transfer to the brew of 12 organophosphates, 5 synthethic pyrethroids and one organochlorine pesticide from spiked samples was studied. The relationship between the transfer data thus obtained and physicochemical properties like water solubility (Ws), octanol-water coefficient (Kow) and Henry's constant (H) was evaluated. The extractability of the pesticide residues from yerba mate can be correlated with log Ws and log Kow. These transfer values allowed the calculation of ARLs (acceptable residue level) for the pesticides following Food and Agriculture Organization (FAO), World Health Organizaion (WHO) guidelines. These results can help the future establishment of maximum residue levels (MRLs)     

Rapid multiresidue determination for currently used pesticides in agricultural drainage waters and soils using gas chromatography–mass spectrometry

An efficient and sensitive method for simultaneous determination of 38 pesticides in agricultural drainage waters and soils has been developed and validated. Water samples were extracted using solid-phase extraction with C18 cartridges while solid samples (suspended particle matter and soil) were extracted by using the quick, easy, cheap, effective, rugged and safe (QuEChERS) extraction method. The target pesticides were analyzed by using gas chromatography-mass spectrometry with electron impact ionization. The proposed method allowed a simultaneous determination and confirmation of a large number of pesticides in agricultural drainage waters, suspended particle matters and soils/sediments with a good reproducibility and low detection limits. The developed method was applied to a survey of pesticides in a vegetable growing area of Guangzhou, China. The pesticides commonly found in the area were butachlor, carbofuran, dichlorvos, fipronil, isocarbophos and pyridaben.     

Application of Automated Mass Spectrometry Deconvolution and Identification Software for Pesticide Analysis in Surface Waters

A new approach to surface water analysis has been investigated in order to enhance the detection of different organic contaminants in Nathan Creek, British Columbia. Water samples from Nathan Creek were prepared by liquid/liquid extraction using dichloromethane (DCM) as an extraction solvent and analyzed by gas chromatography mass spectrometry method in scan mode (GC-MS scan). To increase sensitivity for pesticides detection, acquired scan data were further analyzed by Automated Mass Spectrometry Deconvolution and Identification Software (AMDIS) incorporated into the Agilent Deconvolution Reporting Software (DRS), which also includes mass spectral libraries for 567 pesticides. Extracts were reanalyzed by gas chromatography mass spectrometry single ion monitoring (GC-MS-SIM) to confirm and quantitate detected pesticides. Pesticides: atrazine, dimethoate, diazinone, metalaxyl, myclobutanil, napropamide, oxadiazon, propazine and simazine were detected at three sampling sites on the mainstream of the Nathan Creek. Results of the study are further discussed in terms of detectivity and identification level for each pesticide found. The proposed approach of monitoring pesticides in surface waters enables their detection and identification at trace levels.     

Ultrasound-assisted emulsification-microextraction of fragrance allergens in water

A method based on ultrasound-assisted emulsification-microextraction (USAEME) and gas chromatography-mass spectrometry (GC-MS) has been developed for the analysis of regulated fragrance allergens in water. Extraction conditions such as the type of solvent, extraction temperature, irradiation time, and salting-out effect were optimized using a multivariate approach. Compounds were extracted during 2 min in an acoustically emulsified media formed by 100 μL chloroform and 10 mL sample. The USAEME process provided an efficient and exhaustive extraction (enrichment factor ～100) and, after centrifugation, the extract was ready for GC analysis. Validation was performed using spiked ultrapure water as well as other most complex matrices such as sewage water. Recoveries between 75% and 110% were generally obtained, and precision was characterized by RSD values <10% in most cases. The limits of detection (LODs) were at the sub-nanogram per millilitre level. The proposed procedure was applied to the determination of allergens in several real samples including tap water, baby bathwater, recreational place water, public washing place water, and sewage water. The presence of some of the target compounds was confirmed in all the samples excluding tap water, demonstrating the ubiquity of this group of cosmetic and personal care products ingredients.     

A method to determine residue levels of persistent organochlorine pesticides in human milk from Indonesian women

A method has been developed for the analysis of organochlorine pesticides in human milk using solvent extraction, Florisil solid phase extraction clean-up and analysis by gas chromatography with an electron capture detector. The recovery of analytes from spiked milk samples was in the range 53 +/- 1% to 109 +/- 7% (n = 9). A small number of samples were obtained from women in a rural and an urban area of Indonesia and analysed using the developed method. The results are reported on a milk fat basis. All samples contained detectable residues of p,p'-DDT (urban mean 0.11 +/- 0.18 mgkg(-1) (n = 5), rural mean 0.07 +/- 0.03 mg kg(-1) (n = 5)) and p,p'-DDE (urban mean 0.05 +/- 0.04 m kg(-1) (n = 5), rural mean 0.76 +/- 1.46 mg kg(-1) (n = 5)). Residues of HCB, betaHCH, alpha-endosulfan and dieldrin were also detected in some samples. There was no significant difference (at the 95% confidence level) in levels of pesticides between urban and rural areas. The levels of organochlorine pesticides in milk from Indonesian women were lower than those reported from Indonesian women exposed to DDT through malaria eradication schemes and were similar to levels reported from UK and Japan.     

Transfer of pesticides to the brew during mate drinking process and their relationship with physicochemical properties

In order to evaluate the extraction of pesticide residues that are transferred to the brew during mate drinking process of P.U.1 yerba mate leaves (Ilex paraguariensis), a special device to simulate the way in which mate is drunk in Uruguay was developed. The transfer to the brew of 12 organophosphates, 5 synthethic pyrethroids and one organochlorine pesticide from spiked samples was studied. The relationship between the transfer data thus obtained and physicochemical properties like water solubility (Ws), octanol-water coefficient (Kow) and Henry's constant (H) was evaluated. The extractability of the pesticide residues from yerba mate can be correlated with log Ws and log Kow. These transfer values allowed the calculation of ARLs (acceptable residue level) for the pesticides following Food and Agriculture Organization (FAO), World Health Organizaion (WHO) guidelines. These results can help the future establishment of maximum residue levels (MRLs).     

Multiresidue method for high-performance liquid chromatography determination of carbamate pesticides residues in tea samples

A multiresidue method was developed to determine 19 carbamate pesticides in tea samples. Optimizations of different parameters, such as the type of extraction solvents, clean-up cartridges, and elution solvents were carried out. The developed method used acetonitrile as extraction solvent, amino cartridge for adsorbents and acetone-n-hexane as the eluting solution. Nineteen carbamate residues were then analyzed by high-pressure liquid chromatography (HPLC) with fluorescence detector. The present results showed good linearity by correlation coefficients of more than 0.9999 for all analyses. Limits of detection and quantification varied from 0.0005–0.023 mg L^{? 1}, 0.008–0.077 mg L^{? 1}, respectively. Recoveries of sixteen carbamate pesticides ranged from 65% to 135% at the spiked level of 0.5, 1.0 and 2.0 mg L^{? 1}. The relative standard deviations were lower than 20% and coefficient of variations were lower than 15%. The results indicate that the proposed method provides an effective multi and trace level screening determination of carbamate pesticides residues for tea samples.     

Microwave/SPME method to quantify pesticide residues in tomato fruits

A new analytical method using focused microwave-assisted extraction (FMAE), coupled with solid phase micro-extraction (SPME), has been elaborated to determine 25 pesticides used in tomato cultivation. Microwave energy was used for a fast and controlled heating of solvent to selectively extract compounds. Calibration curves were plotted from blank tomato samples spiked at different concentrations with standards. A linear response was obtained between 10 and 1000 μ g/Kg for pyrethroids and between 0.1 and 5000 μ g/Kg for other compounds. For all studied substances, the resulting correlation coefficient (r²) was greater than 0.99. Limits of detection (LOD) and quantification (LOQ) were measured lower than 8 and 25 μ g/Kg, respectively. The relative standard deviation (RSD) was determined below 15% for all pesticides. Field incurred tomato samples were used to validate the new FMAE/SPME method. Observed analysis results by using this technique were in good agreement compared to those obtained by two accredited trading laboratories using traditional methods. Four tomato samples, bought in a local market, were also tested with the FMAE/SPME method.     

Validation of an efficient method for the determination of pesticide residues in fruits and vegetables using ethyl acetate for extraction

In this study, a version of the "quick, easy, cheap, effective, rugged, and safe" (QuEChERS) method was modified to use ethyl acetate (EtOAc) rather than acetonitrile (MeCN) for extraction in the determination of multiple pesticide residues in fruits and vegetables. EtOAc is better suited than MeCN for gas chromatographic (GC) analysis with electron capture detection (ECD) and nitrogen-phosphorus detection (NPD). The method entailed extraction of 30 g chopped sample plus 5 g NaHCO(3) and 30 g anhydrous Na(2)SO(4) with 60 mL EtOAc using a probe blender. After a centrifugation step, removal of residual water and cleanup were performed using dispersive solid-phase extraction (dispersive-SPE) with MgSO(4) and primary secondary amine (PSA) sorbent. (14)C-labeled chlorpyrifos with liquid scintillation counting was used to assist in optimizing and characterizing the method, and GC-ECD and GC-NPD were used for analysis of 24 selected pesticides. The method was validated using tomato, apple and frozen green bean matrices spiked at 0.05, 0.5, and 5 mg/kg. For 22 of the analytes, recoveries averaged 93% for all three commodities over the validation range with a relative standard deviation of 10% (n = 1182). Lower recoveries of dichlorvos were obtained with the method and iprodione determination was compromised in the green beans by an interfering peak. Typical limits of detection were 0.005-0.01 mg/kg with the method.     

Evaluation of activated carbon fiber filter for sampling of organochlorine pesticides in environmental water samples

A simple method for quantitative analyses of organic chlorine pesticides (OCPs) in environmental water samples such as rainwater, river water and seawater using activated carbon fiber filters (ACFF) is described. ACFF was used as adsorbent to collect the chemicals in water samples. The collection of OCPs was completed almost for one day by stirring the mixture of the sample and the ACFF chips at room temperature. The adsorbed OCPs on the ACFF could be extracted easily with toluene-ethanol (4:1) mixed solvent. The purified extract by a florisil column chromatograph was followed by the analysis using high-resolution gas chromatograph/high-resolution mass spectrometer. Recoveries of OCPs spiked to actual samples such as rainwater, river water and seawater samples were approximately more than 80%, and the coefficients of variations were within 10%. This method was applied to the actual samples and was confirmed to be applicable for monitoring sub-ng/l level OCPs in environmental water samples.