A simple model which predicts some non-linear features between atmospheric sulphur and sulphur emissions

This paper develops a simple model and suggests a plausible chemico-physical mechanism for a non-linear response between atmospheric sulphur and sulphur emissions. It contains simplified representations of transport, deposition and conversion processes and uses a proxy in-cloud oxidant-limited reaction along a pathway connecting an emission source with a receptor site. Individual pathway responses to emissions show linear behaviour above a threshold. However, by averaging the values of SO2 at the receptor site from different pathways a continuous non-linear relationship is obtained. As emissions reduce, distant emission sources become less significant contributors of sulphur dioxide at a receptor site but their emissions are still counted in an emission inventory, leading to an apparent non-linearity. Sulphate is always found to contribute a signal to the receptor site total. This model goes someway to explaining a proposed 'crossover' between observed proportions of wet and dry deposited sulphur in the UK as emissions have been reduced.     

Effect of advanced oxidants generated via ultraviolet light on a sequentially loaded and regenerated granular activated carbon biofilter

The objective of this research was to investigate a sequentially loaded and regenerated granular activated carbon (GAC) biofilter system and to determine whether regenerative ozonation/advanced oxidation could improve the removal and biodegradation of a volatile organic compound from a contaminated airstream. Bench-scale reactors were constructed to operate in a manner analogous to a commercially available system manufactured by Terr-Aqua Environmental Systems (only with longer contact time). The GAC system consisted of two GAC biofilter beds that operated in a cyclical manner. On a given day, the first GAC bed adsorbed methyl isobutyl ketone from a simulated waste airstream, while the second bed underwent regeneration; then on the next day, the second bed was in the adsorption mode while the first was regenerated. Three bench-scale systems were used to compare the performance under three operating conditions: (1) ozone/ associated oxidant regeneration of a GAC biofilter system that was seeded with microorganisms from a field site, (2) a humid air regeneration of a seeded GAC biofilter, and (3) a humid air regeneration of an unseeded GAC biofilter. For the advanced oxidant regenerated GAC biofilter, a maximum removal efficiency of >95% was achieved with an empty bed contact time of 148 sec and an influent concentration of 125 ppm methyl isobutyl ketone, and 90-95% was achieved at 148-sec empty bed contact time and a 1150-ppm influent.     

Numerical Modeling of the Transport Diffusion and Deposition of Pollutants For Regions and Extended Scales

There is an emerging need to develop understanding and predictive capability for the transport, diffusion, and deposition of pollutants on regional and extended spatial scales. Some recent developments in the numerical simulation of pollutant transport and diffusion are reviewed and summarized herein, including case studies of model validation whenever’available. The efforts reported include: (a) the development and verification of a Lagrangian large-cloud diffusion code for intermediate to extended scales; (b) a hybrid Lagrangian-Eulerian transport-diffusion code for simulating pollutant distributions in transient stratified shear flow; (c) a meteorological submodel for determining a mass-consistent wind field on a regional scale suitable as input to a regional air pollution model; and (d) the development and initial verification of a multi-box regional air pollution model for the San Francisco Bay Area utilizing a mass-consistent wind field submodel.     

Concurrent 2,4-D and triclopyr biomonitoring of backpack applicators, mixer/loader and field supervisor in forestry

Two herbicides, 2,4-D and triclopyr esters (application ratio 1.6:1 acid equivalents) were applied as a tank mix by a crew of 8 backpack sprayer applicators, a mixer/loader, and a field supervisor. The crew was employed in a conifer release program in northern California during the summer of 2002. Biomonitoring (urine, 24 h) utilized 2,4-D and triclopyr (a.e.) as rapidly excreted exposure biomarkers. The absorbed dosages of 2,4-D and triclopyr were calculated based upon cotton whole body suits and biomonitoring. Dosages based upon accumulation of the herbicides on body suits averaged 42.6 μg (a.e.) 2,4-D/kg-d and 8.0 μg (a.e.) triclopyr/kg-d. Six consecutive days of concurrent urine collections showed that backpack applicators excreted an average of 11.0 μg (a.e.) 2,4-D/kg-d and 18.9 μg (a.e.) triclopyr/kg-d. Estimates based upon curve fitting were 17.1 and 29.3 μg (a.e.)/kg-d, respectively. Results suggest that passive dosimetry for 2,4-D consistently overestimated the dosage measured using biomonitoring by a factor of 2-3 fold, while for triclopyr, passive dosimetry underestimated the absorbed dose based on biomonitoring by a factor of 2-4 fold.     

Formulation of a soil-pesticide transport model based on a compartmental approach

A semianalytical soil-pesticide transport model is formulated based on a compartmental approach to determine spatial and temporal variations of pesticide residues across a soil profile. The compartmental model is implemented by drawing an analogy between a series of continuous-flow stirred tank reactors and a soil horizon that consists of multiple perfectly mixed compartments. The analogy is strengthened by exploiting a relation between the compartment series and the conventional convective-dispersive equation (CDE) for vertical transport in the soil. Consequently, the number of compartments in the model formulation is not free, but dictated as a function of transport parameters. The model formulation allows consideration of arbitrary boundary value specifications and also, for some cases, spatially varying initial concentration profiles. Sorption kinetics is represented via a two-site model that involves a linear sorption isotherm and a first-order irreversible sorption or a radial diffusive penetrating model. For these three cases, analysis of the compartmental model allows the resultant concentration profiles to be expressed in terms of the Poisson distribution. When a nonlinear kinetic sorption model is used to simulate the sorption processes, an analytical solution is not found and a numerical approach is required.     

Development of cleaner-burning brick kilns in Ciudad Juarez, Chihuahua, Mexico

The following results provide a comparison between net airborne contamination produced by the traditional form of kiln used in Northern Mexico and by those modified according to a design by Dr. Robert Marquez. What has become known as the MK style kiln was intended to significantly reduce contaminant emissions. The concept involves covering the kiln with a dome and channeling the output of an active kiln through a second, identical loaded kiln for its additional filtration of the effluents. Kilns of a pair are connected via clay brick channels. The roles are reversed after the initial kiln is refilled. Significant reductions in the particulate and gaseous emissions were achieved in the prototype system, but a connectional problem with recent kiln pairs has also limited the degree of operational success. The problem did not mask the potential of the MK kiln, as will be shown. Additional anticipated benefits to the owners of MK kilns, such as reduced operating cycles and decreased quantities of fuel, also have been verified. Key measurements made during all of the burns were of aerosol densities and buoyancies in the flues, kiln temperatures, and, on a number of occasions, chemical analyses of both aerosol and gaseous effluents. Continuous time histories of aerosol densities for most burns (of a total of -40) provide a basis for examining features and the effects of differing styles of operation with respect to burn efficiency and net contaminant masses. Covering the active kiln with a dome produces a net reduction in dry aerosol effluent mass of a factor between 5 and 10, whereas the addition of a filter kiln produces a net reduction of about a factor of 2. The use of used motor oil as a fuel further reduced aerosol contamination by -1 order of magnitude.     

Total and Methylmercury in Soft Tissues of White-Tailed Eagle (Haliaeetus albicilla) and Osprey (Pandion haliaetus) Collected in Poland

Mercury (Hg) contamination in piscivorous birds, especially methylmercury (MeHg), has been drawing much attention worldwide in regard to its bioaccumulation and biomagnification in food chains. In this study on Hg in the soft tissues of white-tailed eagles (n = 22) and ospreys (n = 2) from Poland, total Hg (THg) range was 0.15–47.6 while MeHg range was 0.11–8.05 mg kg⁻¹ dry weight. In both species, median THg and MeHg concentrations were lower in the muscle and brain than in the liver and kidney. Median nephric residues were just under 3 and 5 mgTHg kg⁻¹ or 0.9 and 3.7 mgMeHg kg⁻¹ for white-tailed eagle and osprey, respectively. In Norwegian data from the 1970s and in our results, MeHg in the muscle of white-tailed eagle was ~60 % THg (%MeHg = MeHg/THg × 100), lower than in other piscivorous birds. A clear similarity in THg tissue levels was found between Polish and German populations of white-tailed eagles.     

Effect of Advanced Oxidants Generated Via Ultraviolet Light on a Sequentially Loaded and Regenerated Granular Activated Carbon Biofilter

Abstract

The objective of this research was to investigate a sequentially loaded and regenerated granular activated carbon (GAC) biofilter system and to determine whether regenerative ozonation/advanced oxidation could improve the removal and biodegradation of a volatile organic compound from a contaminated airstream. Bench-scale reactors were constructed to operate in a manner analogous to a commercially available system manufactured by Terr-Aqua Environmental Systems (only with longer contact time). The GAC system consisted of two GAC biofilter beds that operated in a cyclical manner. On a given day, the first GAC bed adsorbed methyl isobutyl ketone from a simulated waste airstream, while the second bed underwent regeneration; then on the next day, the second bed was in the adsorption mode while the first was regenerated.

Three bench-scale systems were used to compare the performance under three operating conditions: (1) ozone/ associated oxidant regeneration of a GAC biofilter system that was seeded with microorganisms from a field site, (2) a humid air regeneration of a seeded GAC biofilter, and (3) a humid air regeneration of an unseeded GAC biofilter. For the advanced oxidant regenerated GAC biofilter, a maximum removal efficiency of >95% was achieved with an empty bed contact time of 148 sec and an influent concentration of 125 ppm methyl isobutyl ketone, and 90–95% was achieved at 148-sec empty bed contact time and a 1150-ppm influent.     

Modelling radionuclide transport for time varying flow in a channel network

Water flowrates and flow directions may change over time in the subsurface for a number of reasons. In fractured rocks flow takes place in channels within fractures. Solutes are carried by the advective flow. In addition, solutes may diffuse in and out of stagnant waters in the rock matrix and other stagnant water regions. Sorbing species may sorb on fracture surfaces and on the micropore surfaces in the rock matrix. We present a method by which solute particles can be traced in flowing water undergoing changes in flowrate and direction in a complex channel network where the solutes can also interact with the rock by diffusion in the rock matrix. The novelty of this paper is handling of diffusion in the rock matrix under transient flow conditions. The diffusive processes are stochastic and it is not possible to follow a particle deterministically. The method therefore utilises the properties of a probability distribution function for a tracer moving in a fracture where matrix diffusion is active. The method is incorporated in a three dimensional channel network model. Particle tracking is used to trace out a multitude of flowpaths, each of which consists of a large number of channels within fractures. Along each channel the aperture and velocity as well as the matrix sorption properties can vary. An efficient method is presented whereby a particle can be followed along the variable property flowpath. For stationary flow conditions and a network of channels with advective flow and matrix diffusion, a simple analytical solution for the residence time distribution along each pathway can be used. Only two parameter groups need to be integrated along each path. For transient flow conditions, a time stepping procedure that incorporates a stochastic Monte-Carlo like method to follow the particles along the paths when flow conditions change is used. The method is fast and an example is used for illustrative purposes. It is exemplified by a case where land rises due to glacial rebound. It is shown that the effects of changing flowrates and directions can be considerable and that the diffusive migration in the matrix can have a dominating effect on the results.     

Surrogate Model-Based Simulation-Optimization Approach for Groundwater Source Identification Problems

This study investigates and discusses a time-efficient technology that contains a surrogate model within a simulation-optimization model to identify the characteristics of groundwater pollutant sources. In the proposed surrogate model, Latin hypercube sampling (a stratified sampling approach) and artificial neural network (commencing at the stress period when the concentration is within a certain range, and ending at the peak time) were utilized to reduce workload and costly computing time. The results of a comparison between the proposed surrogate model and the common artificial neural network model and non-surrogate model indicated that the proposed model is a time-efficient technology which could be used to solve groundwater source identification problems.     

Microméthode de dosage simultané de l'alcool isopropylique et de son métabolite l'acétone

Simultaneous determination of Isopropyl Alcohol and Acetone prove to be necessary in cases of poisoning by this widely used alcohol. An aluminum capsule containing a sample of blood to be analyzed is introduced into a gas chromatograph equipped with a flameionization detector and a Carbowax 20 M - Chromosorb WHP column. Use of a small blood sample (0.50 μl) and high sensitivity of the method make it a selected procedure in the clinical diagosis of poisoning by Isopropyl Alcohol.     

Boiler briquette coal versus raw coal: Part II--Energy, greenhouse gas, and air quality implications

The objective of this paper is to conduct an integrated analysis of the energy, greenhouse gas, and air quality impacts of a new type of boiler briquette coal (BB-coal) in contrast to those of the raw coal from which the BB-coal was formulated (R-coal). The analysis is based on the source emissions data and other relevant data collected in the present study and employs approaches including the construction of carbon, energy, and sulfur balances. The results show that replacing R-coal with BB-coal as the fuel for boilers such as the one tested would have multiple benefits, including a 37% increase in boiler thermal efficiency, a 25% reduction in fuel demand, a 26% reduction in CO2 emission, a 17% reduction in CO emission, a 63% reduction in SO2 emission, a 97% reduction in fly ash and fly ash carbon emission, a 22% reduction in PM2.5 mass emission, and a 30% reduction in total emission of five toxic hazardous air pollutant (HAP) metals contained in PM10. These benefits can be achieved with no changes in boiler hardware and with a relatively small amount of tradeoffs: a 30% increase in PM10 mass emission and a 9-16% increase in fuel cost.     

The current state of knowledge of ecosystems and ecosystem services in Russia: A status report

This paper focusses on a conceptual overview of ways to address a comprehensive analysis of ecosystem services (ES) in a country as large and heterogeneous as Russia. As a first step, a methodology for assessing the services for the federal subjects of Russia was chosen, i.e., its constituent provinces and similar entities, in physical terms. Russia harbors a great diversity of natural conditions and ecosystems which are suppliers of ES, and likewise a variety of the socio-economic conditions that shape the demand for these services and their consumption. The methodological approach described permits several important tasks to be addressed: the evaluation of the degree of satisfaction of people’s needs for ES, the identification of ecological donor and acceptor regions, and zoning of the country’s territory for ES assessment. The next step is to prepare a prototype of a National Report on ES in Russia, for which we are presenting the planned structure.     

Characterizing the source/sink behavior of double-layer building materials

A model is developed to predict the rate of mass transfer between a double-layer material and indoor air. The model allows non-uniform initial material-phase concentrations in each of the two layers and a transient influent gas-phase concentration to be considered. This model builds on a recently validated single-layer model and should prove useful in predicting the behavior of double-layer material assemblies. Many indoor furnishings and building structures are comprised of layers of different material. The approach taken here represents a first step in the development of a more generally applicable multi-layer model. An analytical solution to the double-layer model is obtained and a parametric analysis is performed illustrating the behavior of the model as a function of the primary model parameters. The paper concludes by examining the potential use of thin diffusion barriers to reduce material emission rates and a hypothetical example of emissions from an adhesive that is part of an adhesive/material assembly.     

Kenneth Mellanby Review Award. The Mellanby Review Award for 2002

The Mellanby Review Award is named after Kenneth Mellanby, the founding editor of Environmental Pollution. The award is made on a biennial basis to a distinguished scientist in one of the many areas that make up the broad field of environmental pollution. The recipient is asked to write a critical review paper that will be published in the journal and will also receive a US $1500 bursary and travel funds to attend a meeting where the paper will be presented in a public lecture and an award certificate presented.     

Anguilla anguilla L. oxidative stress biomarkers: an in situ study of freshwater wetland ecosystem (Pateira de Fermentelos, Portugal)

Pateira de Fermentelos (PF) is a natural freshwater wetland in the central region of Portugal. In the last decade, the introduction of agricultural chemicals, heavy metals, domestic wastes, as well as eutrophication and incorrect utility of resources resulted in an increased water pollution. The present research work was carried out to check the various oxidative stress biomarker responses in European eel (Anguilla anguilla L.) gill, kidney and liver due to this complex water pollution. Eels were caged and plunged at five different PF sites (A-E) for 48h. A reference site (R) was also selected at the river spring where no industrial contamination should be detected. Lipid peroxidation (LPO), catalase (CAT), glutathione peroxidase (GPX), glutathione S-transferase (GST) and reduced glutathione (GSH) were the oxidative stress biomarkers studied. In gill, site A exposure induced a significant GST activity increase and site B exposure induced CAT activity increase when compared to R. Site C exposure showed a significant CAT and GPX activity increase. Data concerning site D exposure were not determined due to cage disappearance. Site E exposure displayed a significant CAT and GST activity increase. In kidney, site A exposure induced a significant CAT and GPX decrease as well as a GST increase. Site B exposure showed a significant decrease in GPX activity and GSH content. However, site C exposure demonstrated a significant increase in CAT and a decrease in GPX. Site E exposure showed a significant decrease in GPX and increase in GST. In liver, site A exposure showed a significant GST activity decrease as well as GSH content increase. Site B exposure showed a significant CAT, GST and LPO decrease. Site C exposure showed only GST activity decrease, while site E exposure induced a significant increase in GPX. These investigation findings provide a rational use of oxidative stress biomarkers in freshwater ecosystem pollution biomonitoring using caged fish, and the first attempt reported in Portugal as a study of this particular watercourse under the previous conditions. The presence of pollutants in the PF water was denunciated even without a clear relation to the main pollution source distance. The organ specificity was evident for each parameter but without a clear pattern.     

Transverse dispersion of non-reactive tracers in porous media: a new nonlinear relationship to predict dispersion coefficients

Assessing the potential of natural attenuation in groundwater relies on the ability to predict and quantify the processes that occur in contaminant plumes. Transverse dispersion is a significant mass transfer mechanism for mixing of electron acceptors and donors and thus may control the lengths of steady state plumes. Laboratory experiments were carried out using a 2-dimensional acrylic glass tank filled with glass beads, quartz sand and field site material as porous media. Flow velocities and grain sizes were varied in order to cover a large range of Peclet numbers including typical field scenarios. The laboratory study was extended by a comprehensive literature search to compare the new results with earlier work. As a result we propose a new empirical relationship for prediction of transverse dispersion coefficients (Dt) which is based on the Peclet number (Pe). This new relationship indicates a nonlinear dependency on the flow velocity (nu a) and grain size (d), namely a relative decrease of the dispersion coefficient with increasing flow velocity in relatively fast flowing water: Dt/Daq=Dp/Daq+0.28(Pe)0.72 (with Pe=nu a d/Daq; Daq and Dp denote the aqueous and pore diffusion coefficients, resp.).     

Estimating the probability of the public perceiving a decrease in atmospheric haze

Regional haze regulations require progress toward reducing atmospheric haze as measured by particle scattering coefficient of visible light. From a practical perspective, this raises the following question: Given a decrease in extinction, what is the probability that people will notice an improvement in visibility? This paper proposes a quantitative definition of the probability of a perceptible increase in visibility given a decrease in light extinction and a general method to estimate this probability from perception measurements made in the field under realistic conditions. Using data from a recent study of visibility perception by 8 observers, it is estimated that a 2-4 deciview change gives a 67% maximum probability of detecting the improvement. Stated another way, the odds of seeing a difference are at most 2:1 for a change of 2-4 deciviews. A 90% probability requires a change of at least 3.5-7.0 deciviews. The limitations and possible bias in the results of this study are discussed. These results may have a major effect on the cost-benefit analysis of regulatory actions to improve visibility.     

Impacts of meteorological situations and chemical reactions on daily dry deposition of nitrogen into the southern North Sea

The impact of the meteorological situation and chemistry on dry deposition to the southern North Sea is investigated. The studies are performed using a high-resolution meteorology/chemistry model system of different complexity for a five-day period in June 1998. The simulations consider passive tracer transport (Case I), gas phase chemistry (Case II), gas phase plus simple aerosol chemistry (Case III), gas phase plus size dependent aerosol chemistry (Case IV). The results show a very good agreement of meteorology model results with measured data and a reasonable agreement for the concentrations. The dry deposition to the southern North Sea differs a factor of three to seven within the investigated five-day period. Differences are larger for a more complex chemistry. The average dry deposition increases by a factor of three when including gas phase reactions or adding a simple aerosol model and up to a factor of eleven when considering a sectional aerosol model. The input composition depends on the chemistry considered.     

Estimating maximum concentrations for open path monitoring along a fixed beam path

Researchers have applied open path optical sensing techniques to a variety of workplace and environmental monitoring problems. Usually these data are reported in terms of a path-average (or path-integrated) concentration. When assessing potential human exposures along a beam path, this path-average value is not always informative, since concentrations along the path can vary substantially from the beam average. The focus of this research is to arrive at a method for estimating the upper-bound in contaminant concentrations over a fixed open beam path. The approach taken here uses a statistical model to estimate an upper-bound concentration based on a combination of the path-average and a measure of the spatial variability computed from point samples along the beam path. Results of computer simulations and experimental testing in a controlled ventilation chamber indicate that the model produced conservative estimates for the maximum concentration along the beam path. This approach may have many applications for open path monitoring in workplaces or wherever maximum concentrations are a concern.