壳聚糖/改性平菇复合吸附剂对Cr(VI)的吸附特性

以壳聚糖和经酒石酸改性的平菇粉末为材料,通过戊二醛进行交联反应,制得壳聚糖-改性平菇凝胶小球（CMPOD）复合生物吸附剂,用于水溶液中Cr（VI）的吸附去除.结果表明,在实验所测pH值（2~10）范围内,复合吸附剂对Cr（VI）的吸附量随着pH值上升而降低;随着Cr（VI）初始浓度或温度的提高,吸附剂对Cr（VI）的吸附量均相应增加,当Cr（VI）初始浓度为600mg/L,温度为50℃,Cr（VI）吸附量可达190mg/g以上;Cr（VI）的吸附符合准二级动力学方程及Freundlich等温吸附模型;热力学分析表明,吸附剂对Cr（VI）的吸附过程为自发的吸热反应.扫描电镜（SEM）分析显示,吸附剂具有发达的网状结构,吸附Cr（VI）后网状孔隙被填充,且能谱分析（EDS）出现明显的Cr（VI）吸收峰;傅立叶红外光谱分析（FTIR）表明,壳聚糖中的氨基成功引入复合吸附剂中,在Cr（VI）吸附中为主要作用官能团.     

Sequestration of toxic Pb（II） ions by chemically treated rubber （Hevea brasiliensis ） leaf powder

Rubber leaf powder (an agricultural waste) was treated with potassium permanganate followed by sodium carbonate and its performance in the removal of Pb(II) ions from aqueous solution was evaluated. The interactions between Pb(II) ions and functional groups on the adsorbent surface were confirmed by Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) coupled with X-ray energy dispersive spectroscopy (EDX). The effects of several important parameters which can affect adsorption capacity such as pH, adsorbent dosage, initial lead concentration and contact time were studied. The optimum pH range for lead adsorption was 4–5. Even at very low adsorbent dosage of 0.02 g, almost 100% of Pb(II) ions (23 mg/L) could be removed. The adsorption capacity was also dependent on lead concentration and contact time, and relatively a short period of time (60–90 min) was required to reach equilibrium. The equilibrium data were analyzed with Langmuir, Freundlich and Dubinin-Radushkevich isotherms. Based on Langmuir model, the maximum adsorption capacity of lead was 95.3 mg/g. Three kinetic models including pseudo first-order, pseudo second-order and Boyd were used to analyze the lead adsorption process, and the results showed that the pseudo second-order fitted well with correlation coefficients greater than 0.99.     

Adsorptive removal of heavy metal ions from industrial effluents using activated carbon derived from waste coconut buttons

Removal of heavy metal ions from industrial effluents by the activated carbon prepared by steam activation of waste coconut buttons through batch adsorption process.     

改性羧甲基纤维素对铀吸附机理的试验研究

对羧甲基纤维素(CMC)进行改性,并将其用于吸附废水中的铀.研究结果表明:在温度为70℃~80℃、单体质量浓度为30%~35%、羧甲基纤维素:丙烯酸(质量比)为10:2.5、反应时间为3.5~4h条件下,CMC改性效果最好;在改性CMC质量浓度为0.10g/L,温度为25℃, pH值为5.0,反应时间60min的条件下,对废水中铀去除率达到了97.1%;改性CMC对溶液中U(VI)的吸附过程符合Freundlich方程,其吸附动力学数据符合准一级方程(R2=0.9618),表明改性CMC的吸附主要是表面吸附;热力学研究表明,改性CMC对铀的吸附吉布斯自由能(ΔG0)0,吸附过程是自发的吸热反应、以物理吸附为主的过程.     

Biosorption of cesium（Ⅰ） from aqueous solution by a novel exopolymers secreted from Pseudomonas fluorescens C-2： Equilibrium and kinetic studies

The biosorption characteristics of Cs(I) ions from aqueous solution using exopolymers (PFC02) produced from Pseudomonas fluorescens C-2 were investigated as a function of pH, biosorbent dosage, contact time and initial concentration. pH played a major role in the adsorption process, and the optimum pH for the removal of Cs(I) was 8.0. Langmuir, Freundlich and Dubinin-Radushkevich (D-R) models were applied to describe the biosorption isotherm of the Cs(I) ions by PFC02. The Lagergren first-order, pseudo second-order kinetic and intraparticle diffusion models were used to test the kinetic data. Langmuir model and D-R model fitted the equilibrium data better than the Freundlich isotherm. The monolayer adsorption capacities of PFC02 as obtained from Langmuir isotherm at 25°C was found to be 32.63 mg/g. From the D-R isotherm model, the mean free energy was calculated as 26.73 kJ/mol, indicating that the biosorption of cesium was chemisorption. The biosorption process was rapid, and the kinetic rates were best fitted to the pseudo second-order model, which indicated the biosorption process operated through chemisorption mechanism. FT-IR analysis of PFC02 showed the possible functional groups responsible for cesium adsorption were hydroxyl, carboxyl, carbonyl and sulphonate groups. SEM analysis showed the porous structure of the material while EDX analysis confirmed the adsorption of Cs(I) on PFC02. Cesium adsorbed onto the PFC02 could be desorbed efficiently using 1 mol/L HNO3, and the enrichment factor was 50.0. Furthermore, PFC02 could be reused five times with only about 8.25% regeneration loss. The developed method was successfully utilized for the removal of Cs(I) ions from aqueous solution.     

改性污泥灰去除废水中Cu~(2+)试验研究

测试了污泥灰的化学成分并对其进行酸化改性,考察了振荡时间、溶液pH值和反应温度对改性污泥灰去除废水中Cu2+的影响;改性污泥灰对Cu2+的吸附符合Langmuir和Freundlich吸附等温模型,其对Cu2+的最大吸附容量可达7.78mg/g。     

油菜秸杆外壳对水溶液中六价铬的吸附作用

为探讨油菜秸秆外壳去除水溶液中重金属铬的可能性及其影响因素,并研究其吸附性能和吸附机制.采用Box-Behnken Design实验设计研究了水溶液中六价铬[Cr(VI)]初始浓度、pH值范围、油菜秸秆外壳添加量和吸附温度4个因素对油菜秸秆外壳去除溶液中Cr(VI)的影响作用;用吸附等温方程、吸附动力学方程与热力学方程分别探讨了油菜秸秆外壳去除水溶液中Cr(VI)的行为;采用红外光谱技术对油菜秸秆外壳吸附水溶液Cr(VI)前后进行表征,探讨其吸附机制.油菜秸秆外壳去除溶液中Cr(VI)的最佳条件组合为:在吸附时间为1440min时,Cr(VI)初始浓度为99.15mg/L、pH值为1.01、油菜秸秆外壳添加量为2.90g/L和吸附温度35.70℃,Cr(VI)去除率为91.97%;吸附等温线拟合,吸附Cr(VI)行为符合Freundlich方程,为优惠吸附;热力学研究表明:溶液中Cr(VI)吸附属吸热反应,且为自发吸附行为;吸附动力学显示:油菜秸秆外壳去除溶液Cr(VI)符合准二阶动力学方程,吸附过程中存在离子交换;红外光谱提示:吸附过程中,O—H、C—H、NH3+、N—H和C—O基团与Cr(VI) 络合吸附发挥了重要作用.油菜秸秆外壳能够有效吸附水溶液中的Cr(VI),pH值是最为重要的影响因素.     

Acid Blue 25 adsorption on base treated Shorea dasyphylla sawdust: Kinetic, isotherm, thermodynamic and spectroscopic analysis

The potential of base treated Shorea dasyphylla (BTSD) sawdust for Acid Blue 25 (AB 25) adsorption was investigated in a batch adsorption process. Various physiochemical parameters such as pH, stirring rate, dosage, concentration, contact time and temperature were studied. The adsorbent was characterized with Fourier transform infrared spectrophotometer, scanning electron microscope and Brunauer, Emmett and Teller analysis. The optimum conditions for AB 25 adsorption were pH 2, stirring rate 500 r/min, adsorbent dosage 0.10 g and contact time 60 min. The pseudo second-order model showed the best conformity to the kinetic data. The equilibrium adsorption of AB 25 was described by Freundlich and Langmuir, with the latter found to agree well with the isotherm model. The maximum monolayer adsorption capacity of BTSD was 24.39 mg/g at 300 K, estimated from the Langmuir model. Thermodynamic parameters such as Gibbs free energy, enthalpy and entropy were determined. It was found that AB 25 adsorption was spontaneous and exothermic.     

Sequestration of toxic Pb(Ⅱ) ions by chemically treated rubber(Hevea brasiliensis) leaf powder

Rubber leaf powder(an agricultural waste) was treated with potassium permanganate followed by sodium carbonate and its performance in the removal of Pb(Ⅱ) ions from aqueous solution was evaluated.The interactions between Pb(Ⅱ) ions and functional groups on the adsorbent surface were confirmed by Fourier transform infrared(FT-IR) spectroscopy,scanning electron microscopy(SEM) coupled with X-ray energy dispersive spectroscopy(EDX).The effects of several important parameters which can affect adsorption capacity such as pH,adsorbent dosage,initial lead concentration and contact time were studied.The optimum pH range for lead adsorption was 4-5.Even at very low adsorbent dosage of 0.02 g,almost 100% of Pb(Ⅱ) ions(23 mg/L) could be removed.The adsorption capacity was also dependent on lead concentration and contact time,and relatively a short period of time(60-90 min) was required to reach equilibrium.The equilibrium data were analyzed with Langmuir,Freundlich and Dubinin-Radushkevich isotherms.Based on Langmuir model,the maximum adsorption capacity of lead was 95.3 mg/g.Three kinetic models including pseudo first-order,pseudo second-order and Boyd were used to analyze the lead adsorption process,and the results showed that the pseudo second-order fitted well with correlation coefficients greater than 0.99.     

Biosorption of cadmium(Ⅱ) and lead(Ⅱ) ions from aqueous solutions onto dried activated sludge

The removal of heavy-metal ions from aqueous solutions by using dried activated sludge has been investigated in batch systems. Effect of solution pH, initial metal ion concentration, and temperature were determined. The results of the kinetic studies showed that the uptake processes of the two metal ions(Cd(Ⅱ) and Pb(Ⅱ)) followed the pseudo-second-order rate expression. The equilibrium data fitted very well to both the Langmuir and Freundlich adsorption models. The FT-IR analysis showed that the main mechanism of Cd(Ⅱ) and Pb(Ⅱ) biosorption onto dried activated sludge was their binding with amide I group.     

Biosorption of cadmium(Ⅱ) and lead(Ⅱ) ions from aqueous solutions onto dried activated sludge

The removal of heavy-metal ions from aqueous solutions by using dried activated sludge has been investigated in batch systems. Effect of solution pH, initial metal ion concentration, and temperature were determined. The results of the kinetic studies showed that the uptake processes of the two metal ions（Cd（Ⅱ） and Pb（Ⅱ）） followed the pseudo-second-order rate expression. The equilibrium data fitted very well to both the Langmuir and Freundlich adsorption models. The FT-IR analysis showed that the main mechanism of Cd（Ⅱ） and Pb（Ⅱ） biosorption onto dried activated sludge was their binding with amide I group.     

Selective adsorption of silver ions from aqueous solution using polystyrene-supported trimercaptotriazine resin

Trimercaptotriazine-functionalized polystyrene chelating resin was prepared and employed for the adsorption of Ag(I) from aqueous solution. The adsorbent was characterized according to the following techniques: Fourier transform infrared spectroscopy, elemental analysis, scanning electron microscopy and the Brunauer-Emmet-Teller method. The effects of initial Ag(I) concentration, contact time, solution pH and coexisting ions on the adsorption capacity of Ag(I) were systematically investigated. The maximum adsorption capacity of Ag(I) was up to 187.1 mg/g resin at pH 0.0 and room temperature. The kinetic experiments indicated that the adsorption rate of Ag(I) onto the chelating resin was quite fast in the first 60 min and reached adsorption equilibrium after 360 min. The adsorption process can be well described by the pseudo second-order kinetic model and the equilibrium adsorption isotherm was closely fitted by the Langmuir model. Moreover, the chelating resin could selectively adsorb more Ag(I) ions than other heavy metal ions including: Cu(II), Zn(II), Ni(II), Pb(II) and Cr(III) during competitive adsorption in the binary metal species systems, which indicated that it was a highly selective adsorbent of Ag(I) from aqueous solution.     

新型生物吸附剂去除水中六价铬的研究

以Ｐｓｅｕｄｏｍｏｎａｓ ｓｐ．Ｇｘ４－１发酵培养得到的细菌胞外聚合物作吸附剂，研究其对水中重金属Ｃｒ（ＶＩ）的吸附，吸附剂对Ｃｒ（ＶＩ）吸附的最佳ｐＨ初值为０．５～２．０。Ｃｒ（ＶＩ）的吸附分三个阶段：５ｍｉｎ达７５％的快速吸附阶段；１０～４０ｍｉｎ达表现一级反应动力学吸附阶段；５０ｍｉｎ以的趋于平衡，吸附过程符合Ｆｒｅｕｎｄｌｉｃｈ和Ｌａｎｇｍｕｉｒ吸附等温方程。     

Polyphenylene sulfide based anion exchange fiber: Synthesis, characterization and adsorption of Cr(VI)

A fibrous strong base anion exchanger (QAPPS) was prepared for the first time via chloromethylation and quaternary amination reaction of polyphenylene sulfide fiber (PPS), and its physical-chemical structure and adsorption behavior for Cr(VI) were characterized by FT-IR, Energy Dispersive Spectrometry, TG-DTG, elemental analysis and batch adsorptive technique, respectively. The novel fibrous adsorbent could effectively adsorb Cr(VI) over the pH range 1-12, the maximum adsorption capacity was 166.39 mg/g at pH 3.5, and the adsorption behavior could be described well by Langmuir isotherm equation model. The adsorption kinetics was studied using pseudo first-order and pseudo second-order models, and the t_1/2 and equilibrium adsorption time were 5 and 20 min respectively when initial Cr(VI) concentration was 100 mg/L. The saturated fibers could be regenerated rapidly by a mixed solution of 0.5 mol/L NaOH and 0.5 mol/L NaCl, and the adsorption capacity was well maintained after six adsorption-desorption cycles.     

乌贼墨黑色素对Pb2+-Cu2+二元体系的吸附性能研究

为探索新型生物吸附剂，以乌贼墨黑色素（SIM）为吸附剂，研究Pb²⁺、Cu²⁺单组分溶液及Pb²⁺-Cu²⁺二元混合体系中SIM对Pb²⁺和Cu²⁺的吸附效果并构建等温吸附模型.结果表明，pH值、SIM添加量、吸附时间对SIM吸附Pb²⁺和Cu²⁺的吸附量影响较大，而吸附温度对吸附效果影响较小；单组分吸附与二元混合体系吸附对比表明，二元混合体系中Pb²⁺和Cu²⁺存在竞争吸附.应用L （Langmuir）和F （Freundlich）等温吸附模型拟合了SIM对Pb²⁺、Cu²⁺单组分金属离子的吸附过程，其中L模型与试验结果拟合度更高；应用Non-modified Langmuir、Modified Langmuir isotherm、Extended Langmuir、Extended Freundlich和SRS模型5种模型对Pb²⁺-Cu²⁺二元混合体系的等温吸附过程进行拟合，其中Extended Langmuir模型与试验结果拟合度最佳.应用红外光谱（FTIR）分析SIM吸附金属离子的原理时发现，SIM上羟基、-NH和不饱和键是金属离子的吸附位点，且SIM对Pb²⁺的吸附能力优于对Cu²⁺的吸附.     

CTAB改性地聚合物同时去除Cu(II)和Cr(VI)

地聚合物（Geopolymer,简称GP）是由含硅铝酸盐的偏高岭土（Metakaolin,简称MK）或固体废料（如粉煤灰）经碱性激活制备的立体网状结构无机聚合物,对大部分重金属阳离子有良好的吸附作用,但对以阴离子形态存在的重金属吸附效果很差.本研究以偏高岭土为主要原料制备GP,同时用CTAB进行改性,研究其化学组成变化及对典型以阴、阳离子形态存在的重金属Cr（VI）和Cu（II）的同时吸附作用.结果表明,pH为5、吸附时间为24 h、初始浓度为50 mg·L^-1、吸附剂投加量为1 g·L^-1时,CTAB-GP对Cu（II）的去除率达到98.6%,Cr（VI）的最高去除率为25.6%,同时还发现溶液中Cu（II）的存在对吸附Cr（VI）有较大促进作用.整体来看,两种金属混合吸附时很好地符合二级动力学规律,单溶质吸附很好地符合Langmuir和Freundlich等温式,Cu（II）和Cr（VI）的理论最大吸附量分别为147.1 mg·g^-1和63.1 mg·g^-1.XRD、FTIR和BET表征分析结果表明,CTAB-GP中即使存在季铵盐阳离子,但依然属于地聚合物.CTAB-GP可以不牺牲对重金属阳离子吸附性能的同时吸附阴离子,优于常规地聚合物,鉴于CTAB-GP的这种特性,其在重金属污染防治中显示出极大的应用前景.     

ε-聚赖氨酸生产废菌体对六价铬吸附影响的研究

以ε-聚赖氨酸(ε-PL)发酵生产废菌体小白链霉菌(Streptomyces albulus)PD-1为研究对象,探讨了其对吸附Cr(Ⅵ)的影响.实验过程中,对预处理方式、pH、初始Cr(Ⅵ)浓度、吸附时间和温度等因素进行了考察.结果表明,HCl预处理的菌体具有较好的吸附能力,Cr(Ⅵ)的吸附增加率达到22.7%,最佳pH为2.0左右,温度对Cr(Ⅵ)的吸附影响不大.实验过程中分别采取Langmuir和Freundlich 2种吸附等温模型对实验数据进行了拟合,得到2个模型的线性相关系数R2分别为0.979 4和0.979 8,这表明吸附过程中既存在单层吸附同时也存在复杂的多层吸附,小白链霉菌对Cr(Ⅵ)的最大理论吸附量为23.92mg.g-1.通过傅里叶变换红外光谱分析,酰胺基和羟基等基团在吸附过程中起主要作用.     

磁性纳米复合吸附剂PFM对铜的吸附性能与吸附机理研究

制备了磁性纳米复合吸附剂PAM@Fe₃O₄/MnO₂(PFM),用于含铜废水的吸附实验研究,考察了吸附剂投加量、重金属溶液初始浓度、吸附时间等因素对吸附效果的影响。实验结果表明:磁性纳米复合吸附剂PFM可有效去除水中的铜离子,在Cu2+浓度为50 mg/L,pH为6.0,吸附剂量为1.6 g/L的条件下,在400 min达到吸附平衡,吸附容量可达到30.29 mg/g,Cu2+去除率可达到97%。吸附-再生循环实验证实PFM具有良好的再生性能,在去除Cu2+方面具有很好的实际应用前景。VSM分析表明:纳米PFM具备超顺磁性和铁磁性的优势;PFM的XRD图谱显示,PAM附着于纳米Fe₃O₄/MnO₂表面,增强了其与溶液中金属离子接触的表面积,有利于对金属离子的吸附;在纳米PFM吸附剂的FTIR中出现PAM中的酰胺键,印证了Fe₃O₄/MnO₂与PAM成功制备为磁性纳米复合吸附剂PFM。     

改性污泥活性炭吸附废水中Cr(Ⅵ)的性能研究

以污水处理厂剩余污泥为原料,1.0 mol/L KOH做活化改性剂,制备污泥活性炭,探讨不同条件下其对废水中Cr(VI)的吸附性能.结果表明,污泥活性炭对Cr(VI)吸附的最佳条件为:pH为2,温度为25℃,污泥活性炭投加量为5 g/L,吸附时间为40 min.此条件下,废水中Cr(VI)的去除率可达99%以上.动力学分析表明,污泥活性炭对Cr(VI)废水的吸附符合准二级动力学方程与Langmuir等温式.