MgO-based adsorbents for CO2 adsorption: Influence of structural and textural properties on the CO2 adsorption performance

A series of MgO-based adsorbents were prepared through solution–combustion synthesis and ball-milling process.The prepared MgO-based powders were characterized using X-ray diffraction,scanning electron microscopy,N_2 physisorption measurements,and employed as potential adsorbents for CO_2 adsorption.The influence of structural and textural properties of these adsorbents over the CO_2 adsorption behaviour was also investigated.The results showed that MgO-based products prepared by solution–combustion and ball-milling processes,were highly porous,fluffy,nanocrystalline structures in nature,which are unique physico-chemical properties that significantly contribute to enhance their CO_2 adsorption.It was found that the MgO synthesized by solution combustion process,using a molar ratio of urea to magnesium nitrate(2:1),and treated by ball-milling during 2.5 hr(MgO-BM2.5h),exhibited the maximum CO_2 adsorption capacity of 1.611 mmol/g at 25℃ and 1 atm,mainly via chemisorption.The CO_2 adsorption behaviour on the MgO-based adsorbents was correlated to their improved specific surface area,total pore volume,pore size distribution and crystallinity.The reusability of synthesized MgO-BM2.5h was confirmed by five consecutive CO_2adsorption–desorption times,without any significant loss of performance,that supports the potential of MgO-based adsorbent.The results confirmed that the special features of MgO prepared by solution–combustion and treated by ball-milling during 2.5 hr are favorable to be used as effective MgO-based adsorbent in post-combustion CO_2 capture technologies.     

Mesoporous carbon adsorbents from melamine–formaldehyde resin using nanocasting technique for CO2 adsorption

Mesoporous carbon adsorbents, having high nitrogen content, were synthesized via nanocasting technique with melamine–formaldehyde resin as precursor and mesoporous silica as template. A series of adsorbents were prepared by varying the carbonization temperature from 400 to 700°C. Adsorbents were characterized thoroughly by nitrogen sorption, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), elemental (CHN) analysis, Fourier transform infrared (FTIR) spectroscopy and Boehm titration. Carbonization temperature controlled the properties of the synthesized adsorbents ranging from surface area to their nitrogen content, which play major role in their application as adsorbents for CO₂ capture. The nanostructure of these materials was confirmed by XRD and TEM. Their nitrogen content decreased with an increase in carbonization temperature while other properties like surface area, pore volume, thermal stability and surface basicity increased with the carbonization temperature. These materials were evaluated for CO₂ adsorption by fixed-bed column adsorption experiments. Adsorbent synthesized at 700°C was found to have the highest surface area and surface basicity along with maximum CO₂ adsorption capacity among the synthesized adsorbents. Breakthrough time and CO₂ equilibrium adsorption capacity were investigated from the breakthrough curves and were found to decrease with increase in adsorption temperature. Adsorption process for carbon adsorbent–CO₂ system was found to be reversible with stable adsorption capacity over four consecutive adsorption–desorption cycles. From three isotherm models used to analyze the equilibrium data, Temkin isotherm model presented a nearly perfect fit implying the heterogeneous adsorbent surface.     

Mesoporous carbon adsorbents from melamine-formaldehyde resin using nanocasting technique for CO2 adsorption

Mesoporous carbon adsorbents, having high nitrogen content, were synthesized via nanocasting technique with melamine–formaldehyde resin as precursor and mesoporous silica as template. A series of adsorbents were prepared by varying the carbonization temperature from 400 to 700°C. Adsorbents were characterized thoroughly by nitrogen sorption, X-ray diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM), thermogravimetric analysis(TGA), elemental(CHN) analysis, Fourier transform infrared(FTIR) spectroscopy and Boehm titration. Carbonization temperature controlled the properties of the synthesized adsorbents ranging from surface area to their nitrogen content, which play major role in their application as adsorbents for CO_2 capture.The nanostructure of these materials was confirmed by XRD and TEM. Their nitrogen content decreased with an increase in carbonization temperature while other properties like surface area, pore volume, thermal stability and surface basicity increased with the carbonization temperature. These materials were evaluated for CO_2 adsorption by fixed-bed column adsorption experiments. Adsorbent synthesized at 700°C was found to have the highest surface area and surface basicity along with maximum CO_2 adsorption capacity among the synthesized adsorbents. Breakthrough time and CO_2 equilibrium adsorption capacity were investigated from the breakthrough curves and were found to decrease with increase in adsorption temperature. Adsorption process for carbon adsorbent–CO_2 system was found to be reversible with stable adsorption capacity over four consecutive adsorption–desorption cycles. From three isotherm models used to analyze the equilibrium data, Temkin isotherm model presented a nearly perfect fit implying the heterogeneous adsorbent surface.     

Optimization of CO2 adsorption capacity and cyclical adsorption/desorption on tetraethylenepentamine-supported surface-modified hydrotalcite

The objective of this research was to investigate CO_2adsorption capacity of tetraethylenepentamine-functionalized basic-modified calcined hydrotalcite(TEPA/b-c HT)sorbents at atmospheric pressure formed under varying TEPA loading levels,temperatures,sorbent weight to total gaseous flow rate(W/F)ratios and CO_2concentrations in the influent gas.The TEPA/b-c HT sorbents were characterized by means of X-ray diffraction(XRD),Fourier transform infrared spectrometry(FT–IR),thermal gravimetric analysis(TGA),Brunauer–Emmet–Teller(BET)analysis of nitrogen(N_2)adsorption/desorption and carbon–hydrogen–nitrogen(CHN)elemental analysis.Moreover,a full 2~4factorial design with three central points at a 95%confidence interval was used to screen important factor(s)on the CO_2adsorption capacity.It revealed that85.0%variation in the capacity came from the influence of four main factors and the15.0%one was from their interactions.A face-centered central composite design response surface method(FCCCD–RSM)was then employed to optimize the condition,the maximal capacity of 5.5–6.1 mmol/g was achieved when operating with a TEPA loading level of 39%–49%(W/W),temperature of 76–90°C,W/F ratio of 1.7–2.60(g·sec)/cm~3and CO_2concentration of 27%–41%(V/V).The model fitted sufficiently the experimental data with an error range of±1.5%.From cyclical adsorption/desorption and selectivity at the optimal condition,the 40%TEPA/b-c HT still expressed its effective performance after eight cycles.     

Choice of precipitant and calcination temperature of precursor for synthesis of NiCo2O4 for control of CO–CH4 emissions from CNG vehicles

Compressed natural gas(CNG)is most appropriate an alternative of conventional fuel for automobiles.However,emissions of carbon-monoxide and methane from such vehicles adversely affect human health and environment.Consequently,to abate emissions from CNG vehicles,development of highly efficient and inexpensive catalysts is necessary.Thus,the present work attempts to scan the effects of precipitants(Na_2CO_3,KOH and urea)for nickel cobaltite(Ni Co_2O_4)catalysts prepared by co-precipitation from nitrate solutions and calcined in a lean CO-air mixture at 400°C.The catalysts were used for oxidation of a mixture of CO and CH_4(1:1).The catalysts were characterized by X-ray diffractometer,Brunauer–Emmett–Teller surface-area,X-ray photoelectron spectroscopy;temperature programmedreductionandScanningelectronmicroscopycoupledwith Energy-Dispersive X-Ray Spectroscopy.The Na_2CO_3was adjudged as the best precipitant for production of catalyst,which completely oxidized CO-CH_4mixture at the lowest temperature(T_(100)=350°C).Whereas,for catalyst prepared using urea,T_(100)=362°C.On the other hand the conversion of CO-CH_4mixture over the catalyst synthesized by KOH limited to 97%even beyond 400°C.Further,the effect of higher calcination temperatures of 500 and600°C was examined for the best catalyst.The total oxidation of the mixture was attained at higher temperatures of 375 and 410°C over catalysts calcined at 500 and 600°C respectively.Thus,the best precipitant established was Na_2CO_3and the optimum calcination temperature of 400°C was found to synthesize the Ni Co_2O_4catalyst for the best performance in CO-CH_4oxidation.     

Efficient nitrogen doped porous carbonaceous CO2 adsorbents based on lotus leaf

In this work, the waste biomass lotus leaf was converted into N-doped porous carbonaceous CO₂ adsorbents. The synthesis process includes carbonization of lotus leaf, melamine post-treatment and KOH activation. For the resultant sorbents, high nitrogen content can be contained due to the melamine modification and advanced porous structure were formed by KOH etching. These samples were carefully characterized by different techniques and their CO₂ adsorption properties were investigated in detail. These sorbents hold good CO₂ adsorption abilities, up to 3.87 and 5.89 mmol/g at 25 and 0°C under 1 bar, respectively. By thorough investigation, the combined interplay of N content and narrow microporous volume was found to be responsible for the CO₂ uptake for this series of sorbents. Together with the high CO₂ adsorption abilities, these carbons also display excellent reversibility, high CO₂/N₂ selectivity, applicable heat of adsorption, fast CO₂ adsorption kinetics and good dynamic CO₂ adsorption capacity. This study reveals a universal method of obtaining N-doped porous carbonaceous sorbents from leaves. The low cost of raw materials accompanied by easy synthesis procedure disclose the enormous potential of leaves-based carbons in CO₂ capture as well as many other applications.     

Insight into the adsorption of tetracycline onto amino and amino–Fe functionalized mesoporous silica: Effect of functionalized groups

In order to study the influences of functionalized groups onto the adsorption of tetracycline (TC), we prepared a series of amino and amino–Fe^3 + complex mesoporous silica adsorbents with diverse content of amino and Fe^3 + groups (named N,N-SBA15 and Fe-N,N-SBA15). The resulting mesoporous silica adsorbents were fully characterized by X-ray powder diffraction, Fourier transform infrared spectrometer and N₂ adsorption/desorption isotherms. Furthermore, the effects of functionalized groups on the removal of TC were investigated. The results showed that the periodic ordered structure of SBA-15 was maintained after modification of amino/Fe^3 + groups. The functionalized amino groups decreased the adsorption capacity while the coordinated Fe^3 + increased the adsorption capacity. The adsorption kinetics of TC fitted pseudo-second-order model well and the equilibrium was achieved quickly. The adsorption isotherms fitted the Langmuir model well and with the Fe^3 + content increased from 3.93% to 8.26%, the Q_max of the adsorbents increased from 102 to 188 mmol/kg. The solution pH affected the adsorption of TC onto amino complex adsorbents slightly while influenced the adsorption onto Fe-amine complex adsorbents greatly. The adsorption of TC on SBA15 and N,N-SBA15 may be related to the formation of outer-sphere surface complexes, while the adsorption of TC onto Fe-N,N-SBA15 was mainly attributed to the inner-sphere surface complexes. This study could offer potential materials that have excellent adsorption behavior for environmental remediation and suggested useful information for the preparing other adsorbents in environmental applications.     

CO2 capture performance of bi-functional activated bleaching earth modified with basic-alcoholic solution and functionalization with monoethanolamine: isotherms, kinetics and thermodynamics

CO_2 capture performance of bifunctional activated bleaching earth(ABE) was investigated at atmospheric pressure. The sorbents were characterized by means of X-ray diffraction(XRD), Brunauer–Emmett–Teller(BET), Caron-Hydrogen-Nitrogen analysis(CHN), Fourier transform infrared(FT-IR) and thermal gravimetric analysis(TGA). The CO_2 capacity was enhanced via basic-modification and monoethanolamine(MEA) loading of the ABE sorbent to obtain a bifunctional surface property. Here, basic-modified calcined ABE with a 30 wt.%MEA loading(SAB-30) showed the highest CO_2 capture capacity, but this was decreased with excess MEA loading( 30 wt.%). At a 10%(V/V) initial CO_2 concentration feed, the maximum capacity of SAB-30 increased from 2.71 mmol/g at 30℃(without adding moisture to the feed) to 3.3 mmol/g at 50℃ when adding 10%(V/V) moisture to the feed. Increasing the moisture concentration further reduced the maximum CO_2 capacity due to the blocking effect of the excess moisture on the sorbent surface. However, SAB-30 could completely capture CO_2 even in a 100%(V/V) initial CO_2 concentration feed. A maximum CO_2 capacity of5.7 mmol/g for SAB-30 was achieved at 30℃. Varying the ratio of sorbent weight to total flow rate of the gas stream had no discernible effect on the equilibrium CO_2 capture capacity. Avrami's equation and Toth's isotherm model provided a good fitting for the data and suggested the presence of more than one reaction pathway in the CO_2 capture process and the heterogeneous adsorption surface of SAB-30. Thermodynamics studies revealed that CO_2 capture on the bifunctional SAB-30 is feasible, spontaneous and exothermic in nature.     

Adsorptive removal of hydrophobic organic compounds by carbonaceous adsorbents: A comparative study of waste-polymer-based, coal-based activated carbon, and carbon nanotubes

Adsorption of the hydrophobic organic compounds (HOCs) trichloroethylene (TCE), 1,3-dichlorobenzene (DCB), 1,3-dinitrobenzene (DNB) and γ-hexachlorocyclohexane (HCH) on five different carbonaceous materials was compared. The adsorbents included three polymer-based activated carbons, one coal-based activated carbon (F400) and multiwalled carbon nanotubes (MWNT). The polymerbased activated carbons were prepared using KOH activation from waste polymers: polyvinyl chloride (PVC), polyethyleneterephthalate (PET) and tire rubber (TR). Compared with F400 and MWNT, activated carbons derived from PVC and PET exhibited fast adsorption kinetics and high adsorption capacity toward the HOCs, attributed to their extremely large hydrophobic surface area (2700 m²/g) and highly mesoporous structures. Adsorption of small-sized TCE was stronger on the tire-rubber-based carbon and F400 resulting from the pore-filling effect. In contrast, due to the molecular sieving effect, their adsorption on HCH was lower. MWNT exhibited the lowest adsorption capacity toward HOCs because of its low surface area and characteristic of aggregating in aqueous solution.     

CO2 sequestration utilizing basic-oxygen furnace slag: Controlling factors, reaction mechanisms and V–Cr concerns

Basic-oxygen furnace slag(BOF-slag) contains 35%CaO,a potential component for CO_2sequestration.In this study,slag-water-CO_2 reaction experiments were conducted with the longest reaction duration extending to 96 hr under high CO_2 pressures of 100-300 kg/cm2 to optimize BOF-slag carbonation conditions,to address carbonation mechanisms,and to evaluate the extents of V and Cr release from slag carbonation.The slag carbonation degree generally reached the maximum values after 24 hr slag-water-CO_2 reaction and was controlled by slag particle size and reaction temperature.The maximum carbonation degree of 71%was produced from the experiment using fine slag of0.5 mm under 100℃and a CO_2 pressure of 250 kg/cm~2 with a water/slag ratio of 5.Vanadium release from the slag to water was significantly enhanced(generally 2 orders) by slag carbonation.In contrast,slag carbonation did not promote chromium release until the reaction duration exceeded 24 hr.However,the water chromium content was generally at least an order lower than the vanadium concentration,which decreased when the reaction duration exceeded 24 hr.Therefore,long reaction durations of 48-96 hr are proposed to reduce environmental impacts while keeping high carbonation degrees.Mineral textures and water compositions indicated that Mg-wustite,in addition to CaO-containing minerals,can also be carbonated.Consequently,the conventional expression that only considered carbonation of the CaO-containing minerals undervalued the CO_2 sequestration capability of the BOF-slag by~20%.Therefore,the BOF-slag is a better CO_2 storage medium than that previously recognized.     

Zero-valent iron doped carbons readily developed from sewage sludge for lead removal from aqueous solution

Low-cost but high-efficiency composites of iron-containing porous carbons were prepared using sewage sludge and ferric salts as raw materials. Unlike previous time- and energy-consuming manufacturing procedures, this study shows that pyrolyzing a mixture of sludge and ferric salt can produce suitable composites for lead adsorption. The specific surface area, the total pore volume and the average pore width of the optimal composite were 321 m²/g, 0.25 cm³/g, and 3.17 nm, respectively. X-ray diffraction analysis indicated that ferric salt favored the formation of metallic iron, while Fourier transform infrared spectroscopy revealed the formation of hydroxyl and carboxylic groups. The result of batch tests indicated that the adsorption capacity of carbons activated with ferric salt could be as high as 128.9 mg/g, while that of carbons without activation was 79.1 mg/g. The new manufacturing procedure used in this study could save at least 19.5 kJ of energy per gram of activated carbon.     

高分子固体废物基活性炭对有机染料的吸附解吸行为研究

分别以3种高分子固体废物,即轮胎橡胶、聚氯乙烯(PVC)和聚对苯二甲酸乙二酯(PET)为原料,利用KOH活化法制备高比表面积活性炭.通过吸附实验研究了活性炭对2种有机染料(亚甲基蓝和甲基橙)的吸附、解吸行为,同时探讨了溶液pH值、离子强度和表面活性剂对吸附的影响.结果表明,PVC和PET基活性炭比表面积分别为2 666和2 831 m2.g-1,中孔容积分别为1.06和1.30 cm3.g-1,15 min内对亚甲基蓝和甲基橙的去除率分别高达98.5%和97.0%、99.5%和95.0%,且Langmuir模型拟合的染料最大吸附量均超过2 mmol.g-1,显著高于商业活性炭F400.Langmuir模型比Freundlich模型能更好地描述2种染料的吸附行为,说明吸附以表面单层覆盖为主.溶液pH值、离子强度和表面活性剂对染料吸附均有较大影响.制备的高分子基活性炭对亚甲基蓝的吸附强于甲基橙,2种染料均不容易发生解吸.实验结果可为高分子固体废物的资源化利用、制备经济高效的碳质吸附材料提供科学依据.     

Insights into properties of activated carbons prepared from different raw precursors by pyrophosphoric acid activation

Low-cost activated carbons (ACs) were prepared from four kinds of solid wastes: petroleum coke, Enteromorpha prolifera, lignin from papermaking black liquid and hair, by pyrophosphoric acid (H₄P₂O₇) activation. Thermo-gravimetric analysis of the pyrolysis of H₄P₂O₇-precursor mixtures implied that H₄P₂O₇ had different influences on the pyrolysis behavior of the four raw materials. N₂ adsorption/desorption isotherms, scanning electron microscopy, Fourier transform infrared spectroscopy and adsorption capacities for dyes were used to characterize the prepared activated carbons. AC derived from E. prolifera exhibited the highest surface area (1094 m²/g) and maximum monolayer adsorption capacity for malachite green (1250 mg/g). Kinetic studies showed that the experimental data were in agreement with the pseudo-second-order model. The adsorption isotherms were well described by the Langmuir isotherm model, indicating the adsorption of dye onto the ACs proceeded by monolayers.     

New insight into adsorption characteristics and mechanisms of the biosorbent from waste activated sludge for heavy metals

The adsorption characteristics and mechanisms of the biosorbent from waste activated sludge were investigated by adsorbing Pb2+and Zn2+in aqueous single-metal solutions. A p H value of the metal solutions at 6.0 was beneficial to the high adsorption quantity of the biosorbent. The optimal mass ratio of the biosorbent to metal ions was found to be 2. A higher adsorption quantity of the biosorbent was achieved by keeping the reaction temperature below 55°C. Response surface methodology was applied to optimize the biosorption processes, and the developed mathematical equations showed high determination coefficients(above 0.99 for both metal ions) and insignificant lack of fit(p = 0.0838 and 0.0782 for Pb2+and Zn2+, respectively). Atomic force microscopy analyses suggested that the metal elements were adsorbed onto the biosorbent surface via electrostatic interaction. X-ray photoelectron spectroscopy analyses indicated the presence of complexation(between –NH2,-CN and metal ions) and ion-exchange(between –COOH and metal ions). The adsorption mechanisms could be the combined action of electrostatic interaction, complexation and ion-exchange between functional groups and metal ions.     

Sorbents with high efficiency for CO2 capture based on amines-supported carbon for biogas upgrading

Sorbents for CO_2 capture have been prepared by wet impregnation of a commercial active carbon(Ketjen-black, Akzo Nobel) with two CO_2-philic compounds, polyethylenimine(PEI)and tetraethylenepentamine(TEPA), respectively. The effects of amine amount(from 10 to70 wt.%), CO_2 concentration in the feed, sorption temperature and gas hourly space velocity on the CO_2 capture performance have been investigated. The sorption capacity has been evaluated using the breakthrough method, with a fixed bed reactor equipped with on line gas chromatograph. The samples have been characterized by N_2 adsorption–desorption,scanning electron microscopy and energy dispersive X-ray(SEM/EDX). A promising CO_2 sorption capacity of 6.90 mmol/gsorbenthas been obtained with 70 wt.% of supported TEPA at 70℃ under a stream containing 80 vol% of CO_2. Sorption tests, carried out with simulated biogas compositions(CH_4/CO_2mixtures), have revealed an appreciable CO_2 separation selectivity; stable performance was maintained for 20 adsorption–desorption cycles.     

高比表面植物基活性炭吸附水中对硝基苯胺的性能及影响因素

以互花米草与棉秆为原料,以KOH为活化剂,制备了2种低成本高比表面微孔植物基活性炭SA-AC和CS-AC,通过静态实验研究了其对水溶液中对硝基苯胺的吸附特性,测定了溶液pH值、吸附剂剂量、溶液温度对吸附的影响,并探讨了等温吸附行为及其热力学性质.结果表明,在KOH与炭化料的质量比(剂料质量比)为3∶1、活化温度为800℃、活化时间为1.5 h条件下,活化制备的互花米草活性炭SA-AC和棉秆活性炭CS-AC的比表面积分别为2 825 m2.g-1和2 135 m2.g-1,微孔容积分别为1.192 cm3.g-1和1.011 cm3.g-1,对水溶液中对硝基苯胺的Langmuir最大吸附量分别为719和716 mg.g-1,远高于商业活性炭ST1300.溶液pH值和温度对吸附有较大影响,在低温及中性条件下有利于制备活性炭对水溶液中对硝基苯胺的吸附.Freundlich与Redlich-Peterson模型能很好地描述对硝基苯胺在2种活性炭上的吸附行为;热力学研究表明,吸附标准吉布斯自由能变ΔG0与标准焓变ΔH0均为负值,表明对硝基苯胺在这2种活性炭上的吸附属于自发的放热吸附过程;吸附标准熵变ΔS00,说明对硝基苯胺在活性炭表面上的迁移比在溶液中受到了更大的限制.     

Phosphate adsorption performance of a novel filter substrate made from drinking water treatment residuals

Phosphate is one of the most predominant pollutants in natural waters. Laboratory experiments were conducted to investigate the phosphate adsorption performance of a(NFS) made from drinking water treatment residuals. The adsorption of phosphate on the NFS fitted well with the Freundlich isotherm and pseudo second-order kinetic models. At p H 7.0, the maximum adsorption capacity of 1.03 mg/g was achieved at 15°C corresponding to the wastewater temperature in cold months, and increased notably to 1.31 mg/g at 35°C.Under both acidic conditions(part of the adsorption sites was consumed) and basic conditions(negative charges formed on the surface of NFS, which led to a static repulsion of PO43-and HPO42-), the adsorption of phosphate was slightly inhibited. Further study showed that part of the adsorption sites could be recovered by 0.25 mol/L Na OH. The activation energy was calculated to be above 8.0 k J/mol, indicating that the adsorption of phosphate on NFS was probably a chemical process. Considering the strong phosphate adsorption capacity and recoverability, NFS showed great promise on enhancing phosphate removal from the secondary treated wastewater in the filtration process.     

Preliminary investigation of phosphorus adsorption onto two types of iron oxide-organic matter complexes

Iron oxide(FeO)coated by natural organic matter(NOM)is ubiquitous.The associations of minerals with organic matter(OM)significantly changes their surface properties and reactivity,and thus affect the environmental fate of pollutants,including nutrients(e.g.,phosphorus(P)).In this study,ferrihydrite/goethite-humic acid(FH/GE–HA)complexes were prepared and their adsorption characteristics on P at various p H and ionic strength were investigated.The results indicated that the Fe O–OM complexes showed a decreased P adsorption capacity in comparison with bare Fe O.The maximum adsorption capacity(Q_(max))decreased in the order of FH(22.17 mg/g)FH-HA(5.43 mg/g)GE(4.67 mg/g)GE-HA(3.27 mg/g).After coating with HA,the amorphous FH–HA complex still showed higher P adsorption than the crystalline GE–HA complex.The decreased P adsorption observed might be attributed to changes of the Fe O surface charges caused by OM association.The dependence of P adsorption on the specific surface area of adsorbents suggests that the Fe O component in the complexes is still the main contributor for the adsorption surfaces.The P adsorptions on Fe O–HA complexes decreased with increasing initial p H or decreasing initial ionic strength.A strong dependence of P adsorption on ionic strength and p H may demonstrate that outer-sphere complexes between the OM component on the surface and P possibly coexist with inner-sphere surface complexes between the Fe O component and P.Therefore,previous over-emphasis on the contributions of original minerals to P immobilization possibly over-estimates the P loading capacity of soils,especially in humic-rich areas.     

废旧Zn-C电池-活性污泥炭的制备及对SO_2的吸附

以污水厂二次污泥为主要原料,掺杂不同量的废旧Zn-C电池电极材料,采用Zn Cl2活化法制备出废旧Zn-C电池-活性污泥炭,表征分析污泥炭样品的碘吸附值、BET、FT-IR、SEM-EDS和XRD,并进行了低浓度SO2气体动态吸附试验.试验结果表明,污泥与电池粉末质量比为3∶1时,污泥炭的碘吸附值和比表面积分别达到750.6 mg·g-1和708.5 m2·g-1,优于纯污泥炭;回归分析表明,污泥炭吸附低浓度SO2的速率可用班厄姆公式描述,吸附平衡表达式可用Freundlih方程、Langmuir等温方程式表达,而Freundlih方程拟和效果更好.     

Elevated CO2 facilitates C and N accumulation in a rice paddy ecosystem

Elevated CO₂ can stimulate wetland carbon (C) and nitrogen (N) exports through gaseous and dissolved pathways, however, the consequent influences on the C and N pools are still not fully known. Therefore, we set up a free-air CO₂ enrichment experiment in a paddy field in Eastern China. After five year fumigation, we studied C and N in the plant–water–soil system. The results showed: (1) elevated CO₂ stimulated rice aboveground biomass and N accumulations by 19.1% and 12.5%, respectively. (2) Elevated CO₂ significantly increased paddy soil TOC and TN contents by 12.5% and 15.5%, respectively in the 0–15 cm layer, and 22.7% and 26.0% in the 15–30 cm soil layer. (3) Averaged across the rice growing period, elevated CO₂ greatly increased TOC and TN contents in the surface water by 7.6% and 11.4%, respectively. (4) The TOC/TN ratio and natural δ¹⁵N value in the surface soil showed a decreasing trend under elevated CO₂. The above results indicate that elevated CO₂ can benefit C and N accumulation in paddy fields. Given the similarity between the paddies and natural wetlands, our results also suggest a great potential for long-term C and N accumulation in natural wetlands under future climate patterns.