Synthesis of nitrogen-doped carbon nanotubes-FePO4 composite from phosphate residue and its application as effective Fenton-like catalyst for dye degradation

Phosphate residue is regarded as a hazardous waste, which could potentially create significant environmental and health problems if it is not properly treated and disposed of. In this study, nitrogen-doped carbon nanotubes-FePO_4(NCNTs-FePO_4) composite was successfully synthesized from phosphate residue, and its application as an effective catalyst was explored. Firstly, an effective method was developed to recover FePO_4 from phosphate residue, achieving an impressive FePO_4 mass recovery rate of 98.14%. Then, the NCNTsFePO_4 catalyst was synthesized from the recovered FePO_4 by two main reactions, including surface modification and chemical vapor deposition. Finally, the synthesized NCNTs-FePO_4 was applied to photo-degrade 15 mg/L Rhodamine B(RhB) in a Fenton-like system. The results showed that 98.9% of RhB could be degraded in 60 min, closely following the pseudofirst-order kinetics model. It was found that even after six consecutive cycles, NCNTs-FePO_4 still retained a high catalytic capacity(50%). Moreover, ·OH radicals participating in the RhB degradation process were evidenced using quenching experiments and electron paramagnetic resonance analysis, and a rational mechanism was proposed. It was demonstrated that the materials synthesized from hazardous phosphate residue can be used as an effective catalyst for dye removal.     

Phosphate recovery from anaerobic digester effluents using CaMg(OH)4

Dolomite lime(DL)(CaMg(OH)_4) was used as an economical source of Mg~(2+)for the removal and recovery of phosphate from an anaerobic digester effluent of a municipal wastewater treatment plant(MWWTP) wastewater. Batch precipitation results determined that phosphate was effectively reduced from 87 to less than 4 mg-P/L when the effluent water was mixed with 0.3 g/L of DL. The competitive precipitation mechanisms of different solids in the treatment system consisting of Ca~(2+)–Mg~(2+)–NH_4~+–PO_4~(3-)CO_3~(2-)were determined by comparing model predictions with experimental results. Thermodynamic model calculations indicated that hydroxyapatite(Ca_(10)(PO_4)_6(OH)_2), Ca_4H(PO_4)_3?3H_2O, Ca_3(PO_4)_2(beta), and Ca_3(PO_4)_2(am2)were more stable than struvite(MgNH_4PO_3?6H_2O) and calcite(CaCO_3). However, X-ray diffraction(XRD) analysis determined the formation of struvite and calcite minerals in the treated effluent. Kinetic experimental results showed that most of the phosphate was removed from synthetic effluent containing NH_4~+within 2 hr, while only 20% of the PO_4~(3-)was removed in the absence of NH_4~+after 24 hr of treatment. The formation of struvite in the DL-treated effluent was due to the rapid precipitation rate of the mineral. The final pH of the DL-treated effluent significantly influenced the mass ratio of struvite to calcite in the precipitates. Because more calcite was formed when the p H increased from 8.4 to 9.6, a p H range of 8.0–8.5 should be used to produce solid with high PO_4~(3-)content. This study demonstrated that DL could be used for effective removal of phosphate from the effluent and that resultant precipitates contained high content of phosphate and ammonium.     

Metal composition of layered double hydroxides (LDHs) regulating ClO4- adsorption to calcined LDHs via the memory effect and hydrogen bonding

A series of calcined carbonate layered double hydroxides （CLDHs） with various metal compositions and different M^2＋/M^3＋ ratios were prepared as adsorbents for perchlorate. Adsorption isotherms fit Langmuir model well, and the adsorption amount followed the order of MgA1-CLDHs 1〉 MgFeCLDHs 〉〉 ZnA1-CLDHs. The isotherms of MgA1-CLDHs and MgFe-CLDHs displayed a two-step shape at low and high concentration ranges and increased with an increase in the M^2＋/M^3＋ ratio from 2 to 4. The two-step isotherm was not observed for ZnA1-CLDHs, and the adsorption was minimally affected by the M^2＋/M^3＋ ratio. The LDHs, CLDHs and the reconstructed samples were characterized by X-ray diffraction, SEM, FT-IR and Raman spectra to delineate the analysis of perchlorate adsorption mechanisms. The perchlorate adsorption of MgA1-CLDHs and MgFe-CLDHs was dominated by the structural memory effect and the hydrogen bonds between the free hydroxyl groups on the reconstructed-LDHs and the oxygen atoms of the perchlorates. For ZnAI-CLDHs, the perchlorate adsorption was controlled by the structural memory effect only, as the hydroxyl groups on the hydroxide layers preferred to form strong hydrogen bonds with carbonate over perchlorate, which locked the intercalated perchlorate into a more confined nano-interlayer. Several distinct binding mechanisms of perchlorate by CLDHs with unique M^2＋ ions were proposed.     

Immobilization of lead in anthropogenic contaminated soils using phosphates with/without oxalic acid

Understanding the effects of oxalic acid(OA) on the immobilization of Pb(Ⅱ) in contaminated soils by phosphate materials, has considerable benefits for risk assessment and remediation strategies for the soil. A series of phosphate amendments with/without oxalic acid were applied to two anthropogenic contaminated soils. We investigated the immobilization of Pb(Ⅱ) by KH2PO4, phosphate rock(PR), activated phosphate rock(APR) and synthetic hydroxyapatite(HAP) at different phosphate:Pb(P:Pb) molar ratios(0, 0.6, 2.0 and 4.0) in the presence/absence of 50 mmol oxalic acid/kg soil, respectively. The effects of treatments were evaluated using single extraction with deionized water or Ca Cl2, Community Bureau of Reference(BCR) sequential extraction and toxicity characteristic leaching procedure(TCLP)methods. Our results showed that the concentration of water extractable, exchangeable and TCLP-Pb all decreased with incubation time. The concentration of water-extractable Pb after120 days was reduced by 100% when soils were amended with APR, HAP and HAP + OA, and the TCLP-Pb was 5 mg/L for the red soil at P:Pb molar ratio 4.0. Water-soluble Pb could not be detected and the TCLP-Pb was 5 mg/L at all treatments applied to the yellow-brown soil. BCR results indicated that APR was most effective, although a slight enhancement of water-soluble phosphate was detected at the P:Pb molar ratio 4.0 at the beginning of incubation. Oxalic acid activated phosphates, and so mixing insoluble phosphates with oxalic acid may be a useful strategy to improve their effectiveness in reducing Pb bioavailability.     

Method to assess component contribution to toxicity of complex mixtures: Assessment of puberty acquisition in rats exposed to disinfection byproducts

A method based on regression modeling was developed to discern the contribution of component chemicals to the toxicity of highly complex, environmentally realistic mixtures of disinfection byproducts(DBPs). Chemical disinfection of drinking water forms DBP mixtures.Because of concerns about possible reproductive and developmental toxicity, a whole mixture(WM) of DBPs produced by chlorination of a water concentrate was administered as drinking water to Sprague–Dawley(S–D) rats in a multigenerational study. Age of puberty acquisition,i.e., preputial separation(PPS) and vaginal opening(VO), was examined in male and female offspring, respectively. When compared to controls, a slight, but statistically significant delay in puberty acquisition was observed in females but not in males. WM-induced differences in the age at puberty acquisition were compared to those reported in S–D rats administered either a defined mixture(DM) of nine regulated DBPs or individual DBPs. Regression models were developed using individual animal data on age at PPS or VO from the DM study. Puberty acquisition data reported in the WM and individual DBP studies were then compared with the DM models. The delay in puberty acquisition observed in the WM-treated female rats could not be distinguished from delays predicted by the DM regression model, suggesting that the nine regulated DBPs in the DM might account for much of the delay observed in the WM. This method is applicable to mixtures of other types of chemicals and other endpoints.     

Biological removal of air loaded with a hydrogen sulfide and ammonia mixture

The nuisance impact of air pollutant emissions from wastewater pumping stations is a major issue of concern to China. Hydrogen sulfide and ammonia are commonly the primary odor and are important targets for removal. An alternative control technology, biofiltration, was studied. The aim of this study is to investigate the potential of unit systems packed with compost in terms of ammonia and hydrogen sulfide emissions treatment, and to establish optimal operating conditions for a full-scale conceptual design. The laboratory scale biofilter packed with compost was continuously supplied with hydrogen sulfide and ammonia gas mixtures. A volumetric load of less than 150 gH2S/(m^3.d) and 230 gNH3/(m^3.d) was applied for about fifteen weeks. Hydrogen sulfide and ammonia elimination occurred in the biofilter simultaneously. The removal efficiency, removal capacity and removal kinetics in the biofilter were studied. The hydrogen sulfide removal efficiency reached was very high above 99%, and ammonia removal efficiency was about 80%. Hydrogen sulfide was oxidized into sulphate. The ammonia oxidation products were nitrite and nitrate. Ammonia in the biofilter was mainly removed by adsorption onto the carrier material and by absorption into the water fraction of the carrier material. High percentages of hydrogen sulfide or ammonia were oxidized in the first section of the column. Through kinetics analysis, the presence of ammonia did not hinder the hydrogen sulfide removal. According to the relationship between pressure drop and gas velocity for the biofilter and Reynolds number, non-Darcy flow can be assumed to represent the flow in the medium.     

Removal of phosphate by Fe-coordinated amino-functionalized 3D mesoporous silicates hybrid materials

Phosphate removal from aqueous waste streams is an important approach to control the eutrophication downstream bodies of water. A Fe(III) coordinated amino-functionalized silicate adsorbent for phosphate adsorption was synthesized by a post-grafting and metal cation incorporation process. The surface structure of the adsorbent was characterized by X-ray di raction, N2 adsoropion/desoprotion technique, and Fourier transform infrared spectroscopy. The experimental results showed that the adsorption equilibrium data were well fitted to the Langmuir equation. The maximum adsorption capacity of the modified silicate material was 51.8 mg/g. The kinetic data from the adsorption of phosphate were fitted to pseudo second-order model. The phosphate adsorption was highly pH dependent and the relatively high removal of phosphate fell within the pH range 3.0–6.0. The coexistence of other anions in solutions has an adverse e ect on phosphate adsorption; a decrease in adsorption capacity followed the order of exogenous anions: F?? > SO2?? 4 > NO??3 > Cl??. In addition, the adsorbed phosphate could be desorbed by NaOH solutions. This silicate adsorbent with a large adsorption capacity and relatively high selectivity could be utilized for the removal of phosphate from aqueous waste streams or in aquatic environment.     

Effects of phosphate on the transport of graphene oxide nanoparticles in saturated clean and iron oxide-coated sand columns

In this study, transport behaviors of graphene oxide (GO) in saturated uncoated (i.e., clean sand) and goethite-coated sand porous media were examined as a function of the phosphate. We found that phosphate enhanced the transport of GO over a wide range of solution chemistry (i.e., pH 5.0–9.0 and the presence of 10 mmol/L Na⁺ or 0.5 mmol/L Ca²⁺). The results were mainly ascribed to the increase of electrostatic repulsion between nanoparticles and porous media. Meanwhile, deposition site competition induced by the retained phosphate was another important mechanism leading to promote GO transport. Interestingly, when the phosphate concentration increased from 0.1 to 1.0 mmol/L, the transport-enhancement effect of phosphate in goethite-coated sand was to a much larger extent than that in clean sand. The observations were primarily related to the difference in the total mass of retained phosphate between the iron oxide-coated sand and clean sand columns, which resulted in different degrees of the electrostatic repulsion and competitive effect of phosphate. When the background solution contained 0.5 mmol/L Ca²⁺, phosphate could be bind to sand/ goethite-coated sand surface by cation bridging; and consequently, promoted competition between phosphate and nanoparticles for deposition sites, which was an important mechanism for the enhanced effect of phosphate. Moreover, the DLVO theory was applicable to describe GO transport behaviors in porous media in the absence or presence of phosphate. Taken together, these findings highlight the important status and role of phosphate on the transport and fate of colloidal graphene oxide in the subsurface environment.     

Immobilization of lead in anthropogenic contaminated soils using phosphates with/without oxalic acid

Understanding the effects of oxalic acid (OA) on the immobilization of Pb(II) in contaminated soils by phosphate materials, has considerable benefits for risk assessment and remediation strategies for the soil. A series of phosphate amendments with/without oxalic acid were applied to two anthropogenic contaminated soils. We investigated the immobilization of Pb(II) by KH₂PO₄, phosphate rock (PR), activated phosphate rock (APR) and synthetic hydroxyapatite (HAP) at different phosphate:Pb (P:Pb) molar ratios (0, 0.6, 2.0 and 4.0) in the presence/absence of 50 mmol oxalic acid/kg soil, respectively. The effects of treatments were evaluated using single extraction with deionized water or CaCl₂, Community Bureau of Reference (BCR) sequential extraction and toxicity characteristic leaching procedure (TCLP) methods. Our results showed that the concentration of water extractable, exchangeable and TCLP-Pb all decreased with incubation time. The concentration of water-extractable Pb after 120 days was reduced by 100% when soils were amended with APR, HAP and HAP + OA, and the TCLP-Pb was < 5 mg/L for the red soil at P:Pb molar ratio 4.0.Water-soluble Pb could not be detected and the TCLP-Pb was < 5 mg/L at all treatments applied to the yellow-brown soil. BCR results indicated that APRwasmost effective, although a slight enhancement of water-soluble phosphate was detected at the P:Pbmolar ratio 4.0 at the beginning of incubation. Oxalic acid activated phosphates, and so mixing insoluble phosphates with oxalic acid may be a useful strategy to improve their effectiveness in reducing Pb bioavailability.     

Exfoliated Mg–Al–Fe layered double hydroxides/polyether sulfone mixed matrix membranes for adsorption of phosphate and fluoride from aqueous solutions

Mg–Al–Fe layered double hydroxides(LDHs) were exfoliated and incorporated in polyether sulfone membranes for the removal of phosphate and fluoride for the first time. The exfoliation methods, coagulation bath, LDH amount, interfering ions, adsorption isotherm,desorption and reuse of the membranes were investigated. It was found that LDHs could be quickly exfoliated in formamide/N,N-dimethylformamide(DMF) solvent mixtures with sodium carboxymethyl cellulose as a stabilizer. The membranes displayed much higher adsorption capacity for phosphate(5.61 mg/g) and faster adsorption rate than the unexfoliated materials. With increased DMF content in the coagulation bath, the static and dynamic adsorption capacity rose. Interference from Cl-and SO_4~(2-)(50 mg/L) on adsorption of phosphates was not apparent. The membranes displayed excellent reusability in dynamic adsorption/desorption. The membranes also showed high adsorption capacity for fluorides(1.61 mg/g).     

装置施工和检修中法兰、垫片的更换和选择

文章对法兰、垫片泄漏对石油化工企业的安全、环保造成的威胁进行了分析，提出在设计中合理选用管道器材是保证管道和设备正常运行的关键。     

月亮高度及升降时刻与方位的计算

本文编制了计算某地理位置、某一天月亮的出升下降时刻和方位、月亮最高高度和某一时刻月亮高度和方位的计算程序 ,并对程序进行了检验。以防灾技术高等专科学校三楼实训室的地理坐标 (116°4 7 6 31′E ,39°5 7 0 90′N)为例 ,计算了防灾技术高等专科学校 2 0 0 2年 12月 30日 9点 5 4分 30秒的各参数值。     

普光气田腐蚀防控技术研究与应用

普光气田高含H2S(13%~18%)和CO2(8%~10%),输送介质对站场及管道的腐蚀问题需从设计、选材、内外防腐、腐蚀监测、控制保护等多方面进行考虑,确保气田的安全平稳可控进行。     

砷的污染、检测与防治

在环境化学污染物中,砷是最常见、最严重的污染物之一.随着现代工农业生产的发展,砷对环境的污染日趋严重.为了更好地评价砷污染对环境和人体的影响,介绍了砷污染的来源、对人体的危害、标准的检测方法和目前砷污染治理的现状.     

区域物质流规模结构分析评价方法及应用研究

生态经济体系中环境的引导和调控作用是经济系统物质代谢的重要组成部分.为了更为完善地分析评价经济发展和环境压力的关系,在输入端、输出端物质流规模和结构分析中侧重于物质隐藏流的综合计算,并以广州市南沙区为例进行实证研究.研究结果表明:南沙区域出口与出口物质隐藏流呈逐步上升趋势;南沙区的区内生产过程排放呈现"先降后增、总体递增"的趋势,今后南沙区应加强对工业生产过程中工业固废和二氧化硫排放的监控.     

环境科学与工程专业实践教学环节的探讨

当今社会中国的环境问题日益突出,人民群众的环境意识日益加强,随之而来的对环境科学与工程高技术人才的需求量越来越大,同时对环境科学与工程高技术人才的要求也越来越高。在培养具有高竞争能力和创新精神的复合型高素质环境专业人才的过程中,实践教学环节显得尤为重要。锻炼和提高学生的动手能力和实践能力,培养学生的创新精神,是提高学生在社会中竞争力的关键。文中分析了环境科学与工程专业实践教学环节中存在的主要问题;提出了从实验教学及工程设计环节、实习环节到毕业设计环节进行改革,增强实践教学的内容,改进实践教学的方法。     

真菌和细菌对染料的吸附脱色及再生能力的研究

进行了真菌和细菌共培养对染料的吸附脱色和吸附脱色能力再生的研究。结果表明，青霉菌G－1首先对偶氮染料S－119、蒽醌染料艳紫KN－B（C．I．Reactive violet 22）水溶液中染料进行快速吸附去除，菌丝对同种染料的吸附速度随菌丝培养液中葡萄糖浓度的增加而加快，吸附染料的G－1菌丝在与细菌的共培养中完成对染料的脱色降解，脱色速度受培养液中葡萄和氮源浓度影响较大，从吸附速率和完全脱色时间综合评价，以葡萄糖浓度为5g/L、酒石酸铵为20mmol/L的培养基中培养的菌丝对染料的吸附脱色效果最好，吸附在菌丝上的艳紫KN－B脱色后菌丝吸附脱色能力得到再生，菌丝对100mg/L的艳紫KN－B染料水溶液可重复处理4次。青霉菌G－1对酸性染料废水处理3h，色度去除率为75．9％，吸附染料的菌丝在与细菌共培养中完成对染料的脱色，对试验所用染料废水，菌丝的处理能力获得1次再生。     

国内外关于"轻柴油"安全标准规范的概况与比较

新“轻柴油”产品标准将轻柴油的闪点指标由原来的≥65℃改为≥55℃，由此导致轻柴油的火灾危险类别发生变化，并进而引发原有轻柴油储罐能否安全储存新标准轻柴油的问题。本文就此对国内外有关“轻柴油”的安全标准和规范进行了分析比较，以期能对我国轻柴油的安全储存提供一些资料方面的参考。     

铅镉胁迫下接种根际细菌和真菌对圆叶无心菜生长和铅镉累积的影响

铅镉胁迫条件下,采用盆栽试验,研究接种云南会泽铅锌矿区Cd超累积植物-圆叶无心菜的根际细菌和真菌,对圆叶无心菜的生长和铅镉累积的影响,结果表明：2株根际真菌（YQ2F-5和YG2F-6）显著增加盆栽圆叶无心菜地上部分的生长,1株根际真菌（YQF-5）显著增加盆栽圆叶无心菜的生物量.根际细菌对盆栽圆叶无心菜的生长和生物量没有影响.接种根际细菌和真菌对盆栽圆叶无心菜Pb和Cd的吸收累积没有影响.     

MBR与SMBR脱氮除磷特性及膜污染控制

为提高污水深度处理效能和工艺运行的稳定性,研究以序批式膜生物反应器(SMBR)与传统膜生物反应器(MBR)为对象,对比研究其脱氮除磷特性、缺氧时间对工艺效率的影响及膜污染控制策略,同时应用分子生物学技术对两种工艺中微生物群落结构和组成进行分析.结果表明,间歇曝气能强化系统脱氮,使SMBR工艺去除总氮效果优于MBR,而在氨氮、总磷、COD、浊度去除方面两者无明显差异,去除率分别为94%、78%、80%、97%.延长SMBR工艺缺氧时间对COD、氨氮去除无显著影响,降低了总氮、总磷的去除率,总氮去除率由61%下降到46%,总磷由74%下降到52%.采用间歇曝气和投加一定浓度的粉末活性炭(PAC)均有利于减缓膜污染.微生物群落分析发现,两种工艺中微生物群落结构和组成无显著差异,硝化螺菌属(Nitrospira)和脱氯单胞菌属(Dechloromonas)为系统中的高丰度功能菌群,为工艺高效运行提供了生物学基础.