Effects of Al3+ on the microstructure and bioflocculation of anoxic sludge

The aluminum ions generated from mining aluminum,electrolytic aluminum and the industrial production of aluminum-based coagulants(such as AlCl_3 and Al_2(SO_4)_3) enter sewage treatment plants and interact with activated sludges.An anaerobic/anoxic/oxic(A~2 O) process was used to reveal the effects of Al~(3+) on the pollutant removal efficiencies,bioflocculation and the micro structure of sludge.The results showed that a low concentration of Al~(3+) improved the pollutant removal efficiencies and increased the sludge particle size.However,a high concentration of Al~(3+) hindered microbial flocculation and reduced the pollutant removal efficiencies.With a 10 mg/L Al~(3+) addition,the chemical oxygen demand(COD),total nitrogen(TN) and NH_4~+-N increased by 3%,16% and 27%,and reached as high as 68%,60% and 87%,respectively.At the same time,the dehydrogenase activity,flocculation ability(FA) and contact angle of the sludge reached their maximum levels at 41.3 mg/L/hr,45% and 79.63°,respectively.The specific surface area of the sludge decreased to 7.084 m2/g and the sludge pore size distribution shifted to concentrate in the me soporous range.Most of Al~(3+) was adsorbed on the surface of sludge,changing the physicochemical properties and physical structure of the sludge.     

Synthesis and evaluation of cationic flocculant P(DAC-PAPTAC-AM) for flocculation of coal chemical wastewater

In this study, a high-efficiency cationic flocculant, P(DAC-MAPTAC-AM), was successfully prepared using UV-induced polymerization technology. The monomer Acrylamide (AM): Acryloxyethyl Trimethyl ammonium chloride (DAC): methacrylamido propyl trimethyl ammonium chloride (MAPTAC) ratio, monomer concentration, photoinitiator concentration, urea content, and cationic monomer DAC:MAPTAC ratio, light time, and power of high-pressure mercury lamp were studied. The characteristic groups, characteristic diffraction peaks, and characteristic proton peaks of P(DAC-MAPTAC-AM) were confirmed by fourier transform infrared spectroscopy (FTIR), X-Ray diffraction (XRD), ¹H nuclear magnetic resonance spectrometer (¹H NMR), and scanning electron microscopy (SEM). The effects of dosage, pH value, and velocity gradient (G) value on the removal efficiencies of turbidity, COD, ammonia nitrogen, and total phenol by poly aluminum ferric chloride (PAFC), P(DAC-MAPTAC-AM), and PAFC/P(DAC-MAPTAC-AM) in the flocculation treatment of coal chemical wastewater were investigated. Results showed that the optimal conditions for the flocculation of coal chemical wastewater using P(DAC-MAPTAC-AM) alone are as follows: dosage of 8–12 mg/L, G value of 100–250 s ^? 1, and pH value of 4–8. The optimal dosage of PAFC is 90–150 mg/L with a pH of 2–12. The optimal dosage for PAFC/P(DAC-MAPTAC-AM) is as follows: PAFC dosage of 90–150 mg/L, P(DAC-MAPTAC-AM) dosage of 8–12 mg/L, and pH range of 2–6. When P(DAC-MAPTAC-AM) was used alone, the optimal removal efficiencies of turbidity, COD, ammonia nitrogen, and total phenol were 81.0%, 35.0%, 75.0%, and 80.3%, respectively. PAFC has good tolerance to wastewater pH and good pH buffering. Thus, the flocculation treatment of coal chemical wastewater using the PAFC/P(DAC-MAPTAC-AM) compound also exhibits excellent resistance and buffering capacity.     

Spectroscopic studies of dye-surfactant interactions with the co-existence of heavy metal ions for foam fractionation

The interaction between a cationic dye Methylene Blue (MB) and an anionic surfactant sodium dodecyl sulfate (SDS) with the presence of Cd²⁺ was investigated spectrophotometrically in a certain concentration range. The spectrophotometric measurements of dye-metal ion-surfactant system were carried out. The results indicated that the SDS concentration had a significant influence on the dye spectrum, while the addition of Cd²⁺ hardly caused change of the maximum value of absorbance. According to this observation, we concluded that electrostatic and hydrophobic interaction between dye and surfactant occurred up to a certain level, and the homo-ions Cd²⁺ almost exerted no effect on the dye-surfactant complexation, establishing a theoretical foundation for simultaneous removal of organic dye and heavy metal using foam fractionation. Meanwhile, the effects of their interaction on foam performance were investigated. The results showed that the addition of Cd²⁺ favored the tendency to ameliorate foam properties just contrary to MB. The feasibility of foam separation for dye and heavy metal removal from simulated wastewater was also confirmed using a continuous foam fractionator. In the simultaneous removal process, with the initial SDS concentration ranging from 0.5 to 5.0 mmol/L, the maximum removal efficiencies of MB and Cd²⁺ were obtained as 99.69% and 99.61%, respectively. The enrichment ratios were reduced from 24.34 to 7.65 for MB and from 22.01 to 3.35 for Cd²⁺.     

Cd2+ removal from wastewater by sulfate reducing bacteria with an anaerobic fluidized bed reactor

A process of treatment for containing Cd²⁺ wastewater by sulfate reducing bacteria with upflow anaerobic fluidized bed reactor has been studied. When the concentration of COD and Cd²⁺ in the influent were 270 5mg/L and 100mg/L respectively and hydraulic retention time was 4 hours, the removal rate of COD and Cd²⁺ were higher than 73 8% and 99 8% respectively. The reactor can treat as high as 1000mg/L of concentration of Cd²⁺ . The highest removal velocity rate of Cd²⁺ reached 2999 1mg/(L·d). And the possible relationship between sulfate reducing bacteria and methanogenic bacteria was discussed.     

Biological sulfate removal from acrylic fiber manufacturing wastewater using a two-stage UASB reactor

A two-stage UASB reactor was employed to remove sulfate from acrylic fiber manufacturing wastewater. Mesophilic operation (35±0.5℃) was performed with hydraulic retention time (HRT) varied between 28 and 40 hr. Mixed liquor suspended solids (MLSS) in the reactor was maintained about 8000 mg/L. The results indicated that sulfate removal was enhanced with increasing the ratio of COD/SO₄^2-. At low COD/SO₄^2-, the growth of the sulfate-reducing bacteria (SRB) was carbon-limited. The optimal sulfate removal efficiencies were 75% when the HRT was no less than 38 hr. Sulfidogenesis mainly happened in the sulfate-reducing stage, while methanogenesis in the methane-producing stage. Microbes in sulfate-reducing stage performed granulation better than that in methane-producing stage. Higher extracellular polymeric substances (EPS) content in sulfate-reducing stage helped to adhere and connect the flocculent sludge particles together. SRB accounted for about 31% both in sulfate-reducing stage and methane-producing stage at COD/SO₄^2- ratio of 0.5, while it dropped dramatically from 34% in sulfate-reducing stage to 10% in methane-producing stage corresponding to the COD/SO₄^2- ratio of 4.7. SRB and MPA were predominant in sulfate-reducing stage and methane-producing stage respectively.     

Nitrogen and phosphorus removal in an airlift intermittent circulation membrane bioreactor

A new airlift intermittent circulation integrated bioreactor was developed for simultaneous nitrogen and phosphorus removal of wastewater, in which, circulation of mixed liquid between mixing zone and aeration zone was realized by aeration power, alternately anaerobic/anoxic bio-environment in mixing zone was realized by intermittent circulation and simultaneous nitrogen and phosphorus removal was obtained through strengthened denitrifying phosphorus removal process. Removal performance of the reactor was investigated and pollutant removal and transfer mechanism in one operation circle was analyzed. The experiment results indicated that under the influent condition of chemical oxygen demand (COD) concentration of 642.1 mg/L, total nitrogen (TN) of 87.4 mg/L and PO₄^3--P of 12.1 mg/L, average removal efficiencies of COD, TN and PO₄^3--P reached 96.4%, 83.2% and 90.5%, respectively, with the hydraulic residence time of 22 hr and operation circle time of 185 min. Track studies indicated that the separation of aeration and mixing zones and intermittent circulation of mixed liquid between the two zones provided distinct biological environments spatially and temporally, which ensured the occurrence of multifunctional microbial reactions.     

A novel multistage anoxic/aerobic process with sludge regeneration zone (R-MAO) for advanced nitrogen removal from domestic sewage

To achieve advanced nitrogen removal from actual municipal sewage, a novel multistage anoxic/aerobic process with sludge regeneration zone (R-MAO) was developed. The reactor was used to treat actual domestic sewage and the nitrogen removal capacity of the sludge regeneration zone (R zone) was investigated during the long-term operation. The best performance was obtained at the R zone's Oxidation-Reduction Potential (ORP) of -50±30 mV and hydraulic residence times (HRT) of 1.2 hr. The average effluent COD, TN, NH₄⁺-N and NO₃⁻-N of the R-MAO process were 18.0±2.3, 7.5±0.6, 1.0±0.5 and 4.6±0.4 mg/L, respectively, with the corresponding removal efficiency of COD, TN and NH₄⁺-N were 92.9%±1.0%, 84.1%±1.5% and 97.5%±1.1%. Compared to the sole MAO system, the TN removal efficiency of the R-MAO increased by 10.1%. Besides, under the optimal conditions, the contribution of the R zone in the R-MAO that removal COD, TN, NH₄⁺-N and NO₃⁻-N were 0.36, 0.15, 0.032 and 0.82 g/day. High-throughput sequencing results showed that uncultured_bacterium_f_Burkholderiaceae (5.20%), OLB8 (1.04%) and Ottowia (1.03%) played an important role in denitrification in the R zone. This study provided effective guidance for the design and operation of the R-MAO process in domestic sewage treatment.     

Development of LnMnO3+σ perovskite on low temperature Hg0 removal

LnMnO_3+σ (Ln = La, Pr, Nd, Sm, Eu, Gd or Dy) perovskites synthesized by sol-gel method were employed for gaseous elemental mercury (Hg⁰) removal from coal-fired flue gas. Characterization results revealed the structure of the perovskites presented a phase transition process from rhombohedral system to O- and O'-orthorhombic structure with the change of A-site rare earth elements. The perovskites showed satisfactory Hg⁰ removal capacity in a narrow temperature range of 100–150°C. NdMnO_3+σ with an O-O’ orthorhombic structure presented the best Hg⁰ removal performance, which markedly depends on four factors: crystal structure, oxygen vacancy density, Mn⁴⁺/Mn³⁺ ratio and surface element segregation. The Hg⁰ removal mechanism was illustrated based on the mercury temperature programmed desorption experiment and X-ray photoelectron spectroscopy characterization. Both chemisorption and catalytic oxidation played a role in the Hg⁰ removal process. Chemisorption dominated the Hg⁰ removal, due to the slow catalytic oxidation rate at low temperature. This work preliminarily established the relation between the structure of rare earth manganese perovskite and Hg⁰ removal performance.     

Performance and microbial community analysis of an algal-activated sludge symbiotic system: Effect of activated sludge concentration

It was focused on the effect of different sludge concentrations on the performances of an algal-activated sludge symbiotic system in terms of wastewater treatment, algal-activated sludge characteristics and community structure. The results showed that the highest nutrient removal efficiencies were obtained in the reactor R~2 with soluble chemical oxygen demand(sC OD), ammonia nitrogen(NH_4~+-N) and phosphate(PO_4~(3-)-P) removal efficiencies of(90.6 ± 2.3)%,(97.69 ± 2.6)% and(83.81 ± 2.3)%, respectively. Further investigation exhibited that sludge concentration has a great effect on the dissolved oxygen(DO) concentration, the pH, the growth of algae and the extracellular polymeric substance(EPS) production, which resulted in influencing the settleability and the performance of symbiotic system. The denaturing gradient gel electrophoresis(DGGE) analysis demonstrated that the sludge concentration had a selective power for particular members of algae. Meantime, the stimulated algal population would selectively excite the members of bacteria benefited for the formation of algal-bacterial consortia.The variation of microbial compositions, which was influenced by the different sludge concentrations, might be ultimately responsible for the different treatment performances.     

Enhancing sewage sludge dewaterability by bioleaching approach with comparison to other physical and chemical conditioning methods

The sewage sludge conditioning process is critical to improve the sludge dewaterability prior to mechanical dewatering. Traditionally, sludge is conditioned by physical or chemical approaches, mostly with the addition of inorganic or organic chemicals. Here we report that bioleaching, an efficient and economical microbial method for the removal of sludge-borne heavy metals, also plays a significant role in enhancing sludge dewaterability. The effects of bioleaching and physical or chemical approaches on sludge dewaterability were compared. The conditioning result of bioleaching by Acidithiobacillus thiooxidans and Acidithiobacillus ferrooxidans on sludge dewatering was investigated and compared with the effects of hydrothermal (121℃ for 2 hr), microwave (1050 W for 50 sec), ultrasonic (250 W for 2 min), and chemical conditioning (24% ferric chloride and 68% calcium oxide; dry basis). The results show that the specific resistance to filtration (SRF) or capillary suction time (CST) of sludge is decreased by 93.1% or 74.1%, respectively, after fresh sludge is conditioned by bioleaching, which is similar to chemical conditioning treatment with ferric chloride and calcium oxide but much more effective than other conditioning approaches including hydrothermal, microwave, and ultrasonic conditioning. Furthermore, after sludge dewatering, bioleached sludge filtrate contains the lowest concentrations of chroma (18 times), COD (542 mg/L), total N (TN, 300 mg/L), NH₄⁺-N (208 mg/L), and total P (TP, 2 mg/L) while the hydrothermal process resulted in the highest concentration of chroma (660 times), COD (18,155 mg/L), TN (472 mg/L), NH₄⁺-N (381 mg/L), and TP (191 mg/L) among these selected conditioning methods. Moreover, unlike chemical conditioning, sludge bioleaching does not result in a significant reduction of organic matter, TN, and TP in the resulting dewatered sludge cake. Therefore, considering sludge dewaterability and the chemical properties of sludge filtrate and resulting dewatered sludge cakes, bioleaching has potential as an approach for improving sludge dewaterability and reducing the cost of subsequent reutilization or disposal of dewatered sludge.     

Effects of two sludge application on fractionation and phytotoxicity of zinc and copper in the soil

The potential harm of heavy metals is a primary concern in application of sludge to the agricultural land. A pot experiment was conducted to evaluate the effect of two sludges on fractionation of Zn and Cu in soil and their phytotoxicity to pakchoi. The loamy soil was mixed with 0%, 20%, 40%, 60% and 80% (by weight) of digested sewage sludge (SS) and composted sludge (SC). The additions of both sludges caused a significant raise in all fractions, resulting in that exchangeable (EXCH) and organic bound (OM) became predominance of Zn and organic bound Cu occupied the largest portion. There was more available amount of Zn and Cu in SS treatments than SC treatments. During the pot experiment, the concentration of Zn in EXCH, carbonate (CAR) and OM and Cu in EXCH and OM fractions decreased in all treatments, so their bioavailability reduced. Germination rate and plant biomass decreased when the addition rate was high and the best yield appeared in 20% mixtures at the harvest of pakchoi. The two sludges increased tissue contents of Zn and Cu especially in the SS treatments. Zn in pakchoi was not only in relationship to ΔEXCH and ΔCAR forms but also in ΔOM forms in the sludge-soil mixtures. Tissue content of Cu in pakchoi grown on SC-soils could not be predicted by ΔEXCH. These correlation rates between Zn and Cu accumulation in pakchoi and variation of different fractions increased with time, which might indicate that sludges represented stronger impacts on the plant in long-term land application.     

Intraspecific differences in effects of co-contamination of cadmium and

A hydroponic experiment was carried out to study intraspecific differences in the effects of different concentrations of cadmium (Cd)(0-10 mg/L) and arsenate (As(V)) (0-8 mg/L) on the growth parameters and accumulation of Cd and As in six wheat varieties Jing-9428, Duokang-1, Jingdong-11, Jing-411, Jingdong-8 and Zhongmai-8. The endpoints of wheat seedlings, including seed germination,biomass, root length and shoot height, decreased with increasing the Cd and As concentrations. Significant differences in seed germination, biomass, root length, shoot height and the accumulation of Cd and As were observed between the treatments and among the varieties (p ＜ 0.05). The lethal dosage 50% were about 20, 80, 60, 60, 80 and 20 mg As/L for Jing-9428, Duokang-1, Jingdong-11,Jing-411, Jingdong-8 and Zhongmai-8, respectively, and the corresponding values for Cd were about 30, 80, 20, 40, 60 and 10 mg Cd/L, respectively. Among the six varieties, Duokang-1 was found to be the most resistant to Cd and As toxicity, and Zhongmai-8 was the most sensitive to Cd and As co-contamination. The resistance of the six varieties was found dependant on the seedling uptake of Cd and As. Duokang-1 was the most suitable for cultivation in Cd and As co-contaminated soils.     

Toxic effects of acetochlor, methamidophos and their combination on nifH gene in soil

Toxic effects of two agrochemicals on nifH gene in agricultural black soil were investigated using denaturing gradient gel electrophoresis （DGGE） and sequencing approaches in a microcosm experiment. Changes of soil nifH gene diversity and composition were examined following the application of acetochlor, methamidophos and their combination. Acetochlor reduced the nifH gene diversity （both in gene richness and diversity index values） and caused changes in the nifH gene composition. The effects of acetochlor on nifH gene were strengthened as the concentration of acetochlor increased. Cluster analysis of DGGE banding patterns showed that nifH gene composition which had been affected by low concentration of acetochlor （50 mg/kg） recovered firstly. Methamidophos reduced nifH gene richness that except at 4 weeks. The medium concentration of methamidophos （150 mg/kg） caused the most apparent changes in nifH gene diversity at the first week while the high concentration of methamidophos （250 mg/kg） produced prominent effects on nifH gene diversity in the following weeks. Cluster analysis showed that minimal changes of nifH gene composition were found at 1 week and maximal changes at 4 weeks. Toxic effects of acetochlor and methamidophos combination on nifH gene were also apparent. Different nifH genes （bands） responded differently to the impact of agrochemicals： four individual bands were eliminated by the application of the agrochemicals, five bands became predominant by the stimulation of the agrochemicals, and four bands showed strong resistance to the influence of the agrochemicals. Fifteen prominent bands were partially sequenced, yielding 15 different nifH sequences, which were used for phylogenetic reconstructions. All sequences were affiliated with the alpha- and beta-proteobacteria, showing higher similarity to eight different diazotrophic genera.     

Arsenic uptake by arbuscular mycorrhizal maize （Zea mays L.） grown in an arsenic-contaminated soil with added phosphorus

The effects of arbuscular mycorrhizal (AM) fungus (Glomus mosseae) and phosphorus (P) addition (100 mg/kg soil) on arsenic (As) uptake by maize plants (Zea mays L.) from an As-contaminated soil were examined in a glasshouse experiment.Non-mycorrhizal and zero-P addition controls were included.Plant biomass and concentrations and uptake of As,P,and other nutrients,AM colonization,root lengths,and hyphal length densities were determined.The results indicated that addition of P significantly inhibited root colonization and development of extraradical mycelium.Root length and dry weight both increased markedly with mycorrhizal colonization under the zero-P treatments,but shoot and root biomass of AM plants was depressed by P application.AM fungal inoculation decreased shoot As concentrations when no P was added,and shoot and root As concentrations of AM plants increased 2.6 and 1.4 times with P addition,respectively.Shoot and root uptake of P,Mn,Cu,and Zn increased,but shoot Fe uptake decreased by 44.6%,with inoculation, when P was added.P addition reduced shoot P,Fe,Mn,Cu,and Zn uptake of AM plants,but increased root Fe and Mn uptake of the nonmycorrhizal ones.AM colonization therefore appeared to enhance plant tolerance to As in low P soil,and have some potential for the phytostabilization of As-contaminated soil,however,P application may introduce additional environmental risk by increasing soil As mobility.     

Distribution and ecological effect of mercury in Laogang landfill, Shanghai, China

Laogang landfill near Shanghai is the largest landfill in China, and receives about 10000 t of daily garbage per day, Samples of topsoil and plants were analyzed to evaluate mercury pollution from the landfill. For topsoil samples, there were significant correlations among total mercury （HgT）, combinative mercury （Hgc） and gaseous mercury （HgG）, and content of total organic carbon （TOC）, but, no significantly relationship was found between Hg content and filling time. Hg content changes in vertical profiles with time showed that the average Hgv of profiles 1992, 1996, and 2000 was similar, but their average HgG was quite different. HgT was significantly correlated with Hgc in profile 1992 and 2000, and Hgv was significantly correlated with Hg6 in profile 1996. HgG/Hgv ratio in profile samples decreased in the order of （HgG,/HgT）1992〉（HgG/HgT）1996〉〉（HgG/HgT）2000. A simple outline of Hg release in landfill could be drawn： with increasing of filling time, degradation undergoes different biodegradation, accordingly, gaseous mercury goes through small, more, and small proportion to total mercury. Distribution of Hg in plants was inhomogeneous, following the order of leaf〉root〉stem. The highest value of leaf may be associated with higher atmospheric Hg from landfill. Ligneous plants （e.g. Phyllostachys glanca, Prunus salicina and Ligustrum lucidum） are capable of enriching more Hg than herbaceous plants.     

EDTA-enhanced phytoremediation of lead contaminated soil by Bidens maximowicziana

Phytoremediation is a potential cleanup technology for the removal of heavy metals from contaminated soils.Bidens maximowicziana is a new Pb hyperaccumulator,which not only has remarkable tolerance to Pb but also extraordinary accumulation capacity for Pb.The maximum Pb concentration was 1509.3 mg/kg in roots and 2164.7 mg/kg in overground tissues.The Pb distribution order in the B. maximowicziana was:leaf>stem>root.The effect of amendments on phytoremediation was also studied.The mobility of soil Pb and the Pb concentrations in plants were both increased by EDTA application.Compared with CK(control check),EDTA application promoted translocation of Pb to overground parts of the plant.The Pb concentrations in overground parts of plants was increased from 24.23-680.56 mg/kg to 29.07-1905.57 mg/kg.This research demonstrated that B.maximowicziana appeared to be suitable for phytoremediation of Pb contaminated soil,especially,combination with EDTA.     

Potential of plant polyphenol oxidases in the decolorization and removal of textile and non-textile dyes

In this study an effort has been made to use plant polyphenol oxidases; potato （Solanum tuberosum） and brinjal （Solanum melongena）, for the treatment of various important dyes used in textile and other industries. The ammonium sulphate fractionated enzyme preparations were used to treat a number of dyes under various experimental conditions. Majority of the treated dyes were maximally decolorized at pH 3.0. Some of the dyes were quickly decolorized whereas others were marginally decolorized. The initial first hour was sufficient for the maximum decolorization of dyes. The rate of decolorization was quite slow on long treatment of dyes. Enhancement in the dye decolorization was noticed on increasing the concentration of enzymes. The complex mixtures of dyes were treated with both preparations of polyphenol oxidases in the buffers of varying pH values. Potato polyphenol oxidase was significantly more effective in decolorizing the dyes to higher extent as compared to the enzyme obtained from brinjal polyphenol oxidase. Decolorization of dyes and their mixtures, followed by the formation of an insoluble precipitate, which could be easily removed simply by centrifugation.     

Decomposition of alachlor by ozonation and its mechanism

Decomposition and corresponding mechanism of alachlor, an endocrine disruptor in water by ozonation were investigated. Results showed that alachlor could not be completely mineralized by ozone alone. Many intermediates and final products were formed during the process, including aromatic compounds, aliphatic carboxylic acids, and inorganic ions. In evoluting these products, some of them with weak polarity were qualitatively identified by GC-MS. The information of inorganic ions suggested that the dechlorination was the first and the fastest step in the ozonation of alachlor.     

Enzymatic oxidation of aqueous pentachlorophenol

The influence of the nonionic surfactant Tween 80 on pentachlorophenol （PCP） oxidation catalyzed by horseradish peroxidase was studied. The surfactant was tested at concentrations below and above its critical micelle concentration （CMC）. Enhancement of PCP removal was observed at sub-CMCs. The presence of Tween 80 in the reaction mixture reduced enzyme inactivation which occurred through a combination of free radical attack and sorption by precipitated products. A simple first-order model was able to simulate time profiles for enzyme inactivation in the presence or absence of Tween 80. At supra-CMCs, the surfactant caused noticeable reductions in PCP removal, presumably through micelle partitioning of PCP which precluded the hydrophobic PCP molecule from interacting with the enzyme.     

Effect of sorbed and desorbed Zn(Ⅱ) on the growth of a green alga (Chlorella pyrenoidosa)

Toxic effect of Zn(Ⅱ) on a green alga (Chlorella pyrenoidasa) in the presence of sepiolite and kaolinite was investigated.The Zn-free clays were found to have a negative impact on the growth of C.pyrenoidosa in comparison with control samples (without adding any clay or Zn(Ⅱ)).When Zn(Ⅱ) was added,the algae in the presence of clays could be better survived than the control samples,which was actually caused by a decrease in Zn(Ⅱ) concentration in the solution owing to the adsorption of Zn(Ⅱ) on the clays.When the solution system was diluted,the growth of algae could be further inhibited as compared to that in a system which had the same initial Zn(Ⅱ) concentration as in the diluted system.This in fact resulted from desorption of Zn(Ⅱ) from the zinc-contaminated clays,although the effect varied according to the different desorption capabilities of sepiolite and kaolinite.Therefore the adsorption and desorption processes of Zn(Ⅱ) played an important part in its toxicity,and adsorption and desorption of pollutants on soils/sediments should be well considered in natural eco-environmental systems before their risk of toxicity to aquatic organisms was assessed objectively.