Photocatalytic degradation of phenol with mesoporous TiO2?xBx

We report a facile approach for preparing mesoporous boron-doped TiO₂ materials by combining the sol?Cgel process with the dehydration of glucose. Specifically a high surface carbon material was formed by dehydration of glucose, then used as template. This material and the TiO₂ dry gel were calcinated to produce porous TiO₂. The as-synthesized boron-doped TiO₂ was in pure anatase crystallite phase with high surface area. X-ray photoelectron spectroscopy (XPS) results showed that boron was incorporated into the anatase TiO₂ lattice to form TiO_2?xB_x. The absorption spectra of TiO_2?xB_x extended into the visible region to 460?nm. The TiO_2?xB_x exhibited much higher photocatalytic activity on phenol degradation than pure TiO₂. It showed that the phenol degradation by-products of TiO_2?xB_x were different from that of pure TiO₂. Mechanism of the photocatalytic degradation of phenol at TiO_2?xB_x was also proposed.     

Effect of iron speciation on the photodegradation of Monuron in combined photocatalytic systems with immobilized or suspended TiO2

Photodegradation kinetics of Monuron (3-(4-chlorophenyl)-1,1-dimethylurea) in photoreactor with immobilized and suspended TiO₂ photocatalyst were studied. The effect of addition of ferric or ferrous perchlorate was investigated. Whatever the concentration of Fe(III/II) added there is no significant negative effect on the photodegradation rate of pollutants. On the contrary, depending on speciation and concentration of iron salts, slight or marked acceleration of the photodegradation kinetics was observed. This positive influence was more pronounced in the case of TiO₂ suspensions than for TiO₂ layers. Fe(III) was generally more effective than Fe(II).     

Ag–TiO2 doped photo catalytic degradation of Procion blue H-B dye in textile washwater

The photocatalytic degradation of Procion blue H-B dye in biodegraded textile washwater has been investigated for the complete removal of color and maximum reduction of chemical oxygen demand (COD). Pseudomonas putida was utilized for obtaining biodegraded textile washwater. In this process, silver-doped TiO₂ photocatalyst was prepared and experiments were carried out to study the effects of UV and mercury lamp irradiations on COD reduction and removal of color. The thus prepared silver-doped TiO₂ catalyst was characterized by thermogravimetric and differential thermal analysis, UV-visible spectrometer, X-ray diffraction, scanning electron microscope, energy dispersive X-ray microanalysis, and BET surface area techniques. Adsorption studies were also carried out to evaluate the fitness of isotherm models. The results show that the silver-doped TiO₂ has enhanced the photodegradation of Procion blue H-B dye under UV and mercury lamp irradiations. The enhanced activity of silver-doped TiO₂ is due to the enrichment of electron–hole separation by electron trapping of silver particles.     

Fabrication and photocatalytic ability of an Au/TiO<Subscript>2</Subscript>/reduced graphene oxide nanocomposite

A new type of Au/TiO₂/reduced graphene oxide (RGO) nanocomposite was fabricated by the hydrothermal synthesis of TiO₂ on graphene oxide followed by the photodeposition of Au nanoparticles. Transmission electron microscopy images showed that Au nanoparticles were loaded onto the surface of both TiO₂ and RGO. Au/TiO₂/RGO had a better photocatalytic activity than Au/ TiO₂ for the degradation of phenol. Electrochemical measurements indicated that Au/TiO₂/RGO had an improved charge transfer capability. Meanwhile, chemiluminescent analysis and electron spin resonance spectroscopy revealed that Au/TiO₂/RGO displayed high production of hydrogen peroxide and hydroxyl radicals in the photocatalytic process. This high photocatalytic performance was achieved via the addition of RGO in Au/TiO₂/RGO, where RGO served not only as a catalyst support to provide more sites for the deposition of Au nanoparticles but also as a collector to accept electrons from TiO₂ to effectively reduce photogenerated charge recombination.

Open image in new window

     

Investigation of the effects of humic acid and H<Subscript>2</Subscript>O<Subscript>2</Subscript> on the photocatalytic degradation of atrazine assisted by microwave

A solution of atrazine in a TiO₂ suspension, an endocrine disruptor in natural water, was tentatively treated by microwave-assisted photocatalytic technique. The effects of mannitol, oxygen, humic acid, and hydrogen dioxide on the photodegradation rate were explored. The results could be deduced as follows: the photocatalytic degradation of atrazine fits the pseudo-first-order kinetic well with k = 0.0328 s^?1, and ·OH was identified as the dominant reactant. Photodegradation of atrazine was hindered in the presence of humic acid, and the retardation effect increased as the concentration of humic acid increased. H₂O₂ displayed a significant negative influence on atrazine photocatalysis efficiency. Based on intermediates identified with gas chromatography-mass spectrometry (GC-MS) and Liquid chromatography-mass spectrometry (LC-MS/MS) techniques, the main degradation routes of atrazine are proposed.     

Evaluation of environmental stress by comet assay on freshwater snail Lymnea luteola L. exposed to titanium dioxide nanoparticles

The use of aquatic organisms to monitor for contamination is well-established. Therefore, this study was designed to assess the adverse effects of titanium dioxide nanoparticles (TiO₂NP) in freshwater snail Lymnea luteola L. (L. luteola). For TiO₂NPs ecotoxicity tests, snails were exposed for seven days. A dose and time-response relationship was observed for TiO₂NP-induced genotoxicity. Induction of oxidative stress in digestive gland was observed by a decrease in glutathione and gluthathions-S-transferase levels accompanied by elevated malondialdehyde levels at TiO₂NP (9 and 28 µg/mL). Superoxide dismutase activities were markedly reduced at TiO₂NP (9 and 28 µg/mL) at days 1 and 3, but not at day 7. Catalase activities were decreased at days 1 and 3 but increased at higher concentration of TiO₂NP at day 7. DNA fragmentation occurring in L. luteola due to ecotoxic impact TiO₂NP was further substantiated by alkaline single-cell gel electrophoresis assay and expressed in terms of percent tail DNA and olive tail moment. The results indicate that the interaction of these TiO₂NP with snail influences the toxicity, which is mediated by oxidative stress in a dose- and time-dependent manner. The measurement of DNA integrity in L. luteola thus provides an early warning signal of contamination of the aquatic ecosystem by TiO₂NP. Data suggest the freshwater snail L. luteola is a potential biomonitor organism.     

Degradation of azo dye reactive violet 5 by TiO2 photocatalysis

The photocatalytic degradation of hydrolyzed reactive violet 5 (RV5) using titanium dioxide (TiO₂) was investigated in this study. The effects of various factors including the amount of photocatalyst, RV5 concentration, light intensity, and pH on photocatalytic degradation were evaluated. The photodegradation efficiency was 90% after 20 min of irradiation and reached nearly 100% after 80 min under the condition of pH 4 and temperature of 25°C. The decolorization rate typically followed first-order reaction, and increased markedly with increasing amount of photocatalyst, pH as well as light intensity. The total mineralization, based on total organic carbon (TOC) concentration was 53% after 20 min of UV light exposure and approached nearly 100% after 140 min. The final mineralization product was formylformamide. The photodegradation was faster than the mineralization, indicating that the intermediate products of decolorization were resistant to photodegradation. In this study, we found that toxicity of RV5 significantly decreased after decolorization. Our study suggests that the photocatalytic degradation treatment of RV5 with TiO₂ in wastewater is a simple and fast method.     

Photodegradation of Ibuprofen,Cetirizine, and Naproxen by PAN-MWCNT/TiO<Subscript>2</Subscript>–NH<Subscript>2</Subscript> nanofiber membrane under UV light irradiation

Background

In this study, the photodegradation of three pharmaceuticals, namely Ibuprofen (IBP), Naproxen (NPX), and Cetirizine (CIZ) in aqueous media was investigated under UV irradiation. The photocatalyst used in this work consists of surface functionalized titanium dioxide (TiO₂–NH₂) nanoparticles grafted into Polyacrylonitrile (PAN)/multi-walled carbon nanotube composite nanofibers. Surface modification of the fabricated composite nanofibers was illustrated using XRD, FTIR, and SEM analyses.

Results

Sets of experiments were performed to study the effect of pharmaceuticals initial concentration (5–50 mg/L), solution pH (2–9), and irradiation time on the degradation efficiency. The results demonstrated that more than 99% degradation efficiency was obtained for IBP, CIZ, and NPX within 120, 40, and 25 min, respectively.

Conclusions

Comparatively, the photocatalytic degradation of pharmaceuticals using PAN-CNT/TiO₂–NH₂ composite nanofibers was much more efficient than with PAN/TiO₂–NH₂ composite nanofibers.

     

Solar photocatalytic decomposition of two azo dyes on multi-walled carbon nanotubes (MWCNTs)/TiO<Subscript>2</Subscript> composites

Multi-walled carbon nanotubes (MWCNTs)/TiO₂ composite photocatalysts with high photoactivity were prepared by sol-gel process and further characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), and UV-vis absorption spectra. Compared to pure TiO₂, the combination of MWCNTs with titania could cause a significant absorption shift toward the visible region. The photocatalytic performances of the MWCNTs/TiO₂ composite catalysts were evaluated for the decomposition of Reactive light yellow K-6G (K-6G) and Mordant black 7 (MB 7) azo dyes solution under solar light irradiation. The results showed that the addition of MWCNTs enhanced the adsorption and photocatalytic activity of TiO₂ for the degradation of azo dyes K-6G and MB 7. The effect of MWCNTs content, catalyst dosage, pH, and initial dye concentration were examined as operational parameters. The kinetics of photocatalytic degradation of two dyes was found to follow a pseudo-first-order rate law. The photocatalyst was used for seven cycles with photocatalytic degradation efficiency still higher than 98%. A plausible mechanism is also proposed and discussed on the basis of experimental results.     

Effect of two TiO2 nanoparticles on the growth of unicellular green algae using the OECD 201 test guideline: influence of the exposure system

This work aimed at assessing the influence of different exposure systems to perform the commonly used OECD 201 freshwater algal growth inhibition test in the context of nanoparticles hazard assessment. Two distinct TiO₂ nanoparticles were considered and three different exposure systems were investigated: Erlenmeyers flasks and 24-well microplates (both using an orbital shake system), and an alternative system using cylindrical vials and magnetic stirring. All three systems are in accordance with the OECD 201 test guideline recommendations. We concluded that the exposure systems applied to achieve the test can substantially affect the ecotoxicological results and the subsequent calculated ECx. The selected systems influenced both the interaction between algal cells and TiO₂ nanoparticles as well as the growth inhibition recorded. Disparities in ecotoxicity relative to the TiO₂ nanoparticles tested were also observed and are finally discussed.     

Titanium dioxide nanoparticles: synthesis,characterisations and aquatic ecotoxicity effects

Little information is available on the potential ecotoxicity of nanomaterials in the marine environment. In particular, the aquatic ecotoxicity impact of titanium dioxide (TiO₂) has been rarely reported. To carefully address this issue, we report on the synthesis of TiO₂ NPs using solvothermal process. The structure and morphology of the prepared TiO₂ nanoparticles were characterised using different techniques. To study the potential ecotoxicity effect of TiO₂, antioxidant system of mediterranean bivalves (Mytilus galloprovincialis) was used, measuring three oxidative biomarkers (ROS production, SOD activity and GSH/GSSG level). No considerable effect was found in the digestive glands of any of the groups treated with TiO₂ with concentration gradients ranging from 1 to 100?mg/L. Thus, the level of the superoxide anion, the activity of an antioxidant enzyme superoxide dismutase (SOD) and the GSH/GSSG ratio showed no significantly differences in digestive glands of all treated groups compared to the control. However, slight modifications were observed in the gills at high concentrations. These results demonstrated that TiO₂ appears to exert little toxicity on marine mussels after a short-term exposure at high concentration. However, before considering the use of this nanomaterial in various applications, further complementary studies are required in order to ensure the environmental safety of these NPs.     

Photodegradation of an azo dye by silver-doped nano-particulate titanium dioxide

The synthesis of silver doped nano-particulate titanium dioxide (Ag/TiO₂) using a microemulsion method and an investigation of its photocatalytic activity for the degradation of Acid Red 27 in distilled water under UV-irradiation is reported. The prepared Ag/TiO₂ is characterized using transmission electron microscopy, X-ray diffraction, and energy-dispersive X-ray spectroscopy. The size of the Ag nanoparticles is around 5–15?nm, with almost uniform distribution on the TiO₂ particles. The efficiency of the photocatalytic process is evaluated to establish the optimum conditions, found to be at 2?wt% of Ag loading on TiO₂, catalyst dosage of 400?mg?L^?1, and calcination temperature of 300°C. Complete decolorization of the dye solution on Ag/TiO₂ was observed in 20?min of UV irradiation in the optimum conditions.     

Removal of arsenic from aqueous solution by two types of nano TiO2 crystals

Titanium dioxide (TiO₂) is a promising sorbent for As removal. There are two main and physico-chemically distinct polymorphs of TiO₂ in nature, namely anatase and rutile. Since the difference of arsenic removal by the two polymorphs of TiO₂ is now well known, study on the arsenic removal efficiency and the underlying mechanism is of great significance in developing new remediation strategies for As-polluted waters. Here batch experiments were carried out in combination with instrumental analysis of X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) to investigate the effects, influential factors and mechanisms of As removal from aqueous solution by two types of nano TiO₂ crystals. The adsorption behavior of anatase and rutile for As(V) and As(III) are well described by Freundlich equations. Anatase had higher As removal efficiency and adsorption capacity than rutile. Solution pH had no influence on the As adsorption of anatase TiO₂, whereas the As removal by rutile TiO₂ was increased by 7?C18% with pH from 4 to 10. Presence of accompanying anions such as phosphate, silicate, nitrate and sulfate, decreased the As(V) and As(III) removal by both crystals, with phosphate being the most effective. However, removal of As by rutile TiO₂ was greatly enhanced in the presence of divalent cations i.e. Ca²⁺ and Mg²⁺. Shading of light decreased the removal of As(V) and As(III) of anatase by 15.5% and 17.5%, respectively, while a slight increase of As removal was observed in the case of Rutile TiO₂. FT-IR characterization of As(V) or As(III)-treated nano TiO₂ crystals indicated that both Ti-O and As-O groups participated in As adsorption. Both FT-IR and XPS analysis demonstrated that As(III) was photooxidated into As(V) when adsorbed by anatase under the light condition. Thus, the effect of crystal types and light condition on As removal should be taken into consideration when nano TiO₂ is applied for As removal from water.     

Removal of rhodamine B from aqueous solution by BiPO4 hierarchical architecture

Hexahedron-like BiPO₄ microcrystals were sucessfully synthesized via a template-free hydrothermal method. The resulting samples were characterized by Xray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and UV-vis spectroscopy. The BiPO₄ samples were of pure monoclinic phase, and the initial amount of PO_3–4 during synthesis did not show obvious effect on the phase properties of the materials. The hexahedron-like BiPO₄ microcrystal had explicitly cut edges, and its thickness was about 1 μm. The photocatalytic performance of the BiPO₄ catalysts was evaluated by photodegradation of RhB under UV light irradiation with commerial Degussa P25 TiO₂ as reference. Compared with P25, the BiPO₄ catalysts displayed higher photocatalytic activity, with 98.7% of RhB degraded during 60-min experiment. Cost evaluation analysis was adopted to describe the energy consumption of the degradation process, and the results suggested the potential application of this material in the field of dye-contaminated wastewater treatment or environmental matrices remediation.     

Environmental risk induced by TiO2 dispersions in waters and sediments: a case study

A southern Italian area that is characterized by large outcrops of rocks that are rich in titanium oxide (TiO₂) phases were investigated to determine the mineralogical risk induced by the natural dispersion of TiO₂ minerals. Rock, sediment and surface water samples were collected to determine the physicochemical and mineralogical factors (i.e., size distribution, morphology and alteration) indicative of potential TiO₂ toxicity. X-ray diffraction data suggested that titanium oxides were present as rutile and anatase. Scanning electron microscopy images showed elongated TiO₂ morphologies; fibres were found as either isolated or embedded/enclosed in flake-like phyllosilicates. The concentration of fibres in stream water ranged from 1.7 to 4.6 million fibres per litre. The highest fibre amounts in the sediments were in the <8-µm fraction, while single fibres were primarily concentrated in the <2-µm fraction. The results indicate that titanium oxide minerals represent a natural source of environmental risk and that the geomineralogical characterization of rich TiO₂ areas is indispensable for understanding their geoavailability, dispersion and distribution.

     

Preparation of effective TiO<Subscript>2</Subscript>/Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> photocatalysts for water treatment

Photocatalytic oxidation using semiconductors is one of the advanced oxidation processes for degradation of organic pollutants in water and air. TiO₂ is an excellent photocatalyst that can mineralize a large range of organic pollutants such as pesticides and dyes. The main challenge is to improve the efficiency of the TiO₂ photocatalyst and to extend TiO₂ light absorption spectra to the visible region. A potential solution is to couple TiO₂ with a narrow band gap semiconductor possessing a higher conduction band such as bismuth oxide. Therefore, here we prepared Bi₂O₃/TiO₂ heterojunctions by the impregnation method with different Bi/Ti ratio. The prepared composites have been characterized by UV–Vis diffused reflectance spectra and X-ray diffraction. The photocatalytic activity of the heterojunction has been determined from the degradation of orange II under visible and UV light. Results show that Bi₂O₃/TiO₂ heterojunctions are more effective than pure TiO₂-anatase under UV-A irradiation, with an optimum for the Bi/Ti ratio of 5 %, for the photocatalytic degradation of Orange II. However, the photocatalytic activity under irradiation at λ higher than 420 nm is not much improved. Under UV–visible radiation, the two semiconductors are activated. We propose a mechanism explaining why our products are more effective under UV–visible irradiation. In this case the charge separation is enhanced because a part of photogenerated electrons from the conduction band of TiO₂ will go to the conduction band of bismuth oxide. In this composite, titanium dioxide is the main photocatalyst, while bismuth oxide acts as adsorbent photosensitizer under visible light.     

Photocatalytic oxidation of the textile dye basic red 18 with irradiated titanium dioxide

One of the major problems of textile wastewater is the presence of dye materials, because colour is visible to the public even if the dye concentration is lower than other pollutants, and needs therefore to be removed from the wastewater before it is discharged. Techniques based on “advanced oxidative processes” such as photocatalysed oxidation seem to be very promising for industrial wastewater treatment, especially for decolourization of textile effluents. In this work, we describe the photocatalytic degradation of the textile dye Basic Red 18 (BR 18) in aqueous solution using two different types of TiO₂ as photocatalyst: Degussa P25 (80% anatase) and Framitalia (100% anatase). Photooxidation of BR 18 was followed by HPLC analysis, and kinetic parameters were evaluated in order to optimise the treatment procedure. The results obtained in this work showed that the colour became virtually zero and the chemical oxygen demand (COD) is strongly reduced at the end of the treatment. The obtained results are compared with the efficiency of decolourization using the H₂O₂/UV System. Finally, marine mussel test was used to evaluate the efficiency of photocatalytic oxidation with TiO₂ in terms of ecotoxicity. A significant reduction of cumulative mortality was observed for the treated effluent.     

Photocatalytic mineralization of a water pollutant,Sunset Yellow dye by an advanced oxidation process using a modified catalyst

ZnS-loaded TiO₂ (ZnS–TiO₂) was synthesized by a sol–gel method. The catalyst was characterized by using different techniques (XRD, HR-SEM, EDS, DRS, PL, XPS, and BET methods). The photocatalytic activity of ZnS–TiO₂ was investigated for the degradation of Sunset Yellow FCF (SY) dye in an aqueous solution using ultraviolet light. ZnS–TiO₂ is found to be more efficient than prepared TiO₂, TiO₂–P25, TiO₂ (Merck), and ZnS at pH 7 for the mineralization of SY. The effects of operational parameters such as the amount of photocatalyst, dye concentration, and initial pH on photo mineralization of SY have been analyzed. The mineralization of SY has been confirmed by chemical oxygen demand measurements. The catalyst is found to be reusable.     

Effect of TiO2 nanoparticles and multiwall carbon nanotubes on the freshwater diatom Nitzschia frustulum: evaluation of growth,cellular components and morphology

Great attention should be paid to the possible impacts of various nanoparticles on aquatic organism. Freshwater diatoms are essential components of phytoplankton and play a critical role in bioassessment of nanoparticle exposure in the environment. In this study, cell growth was inhibited by TiO₂-NPs and MWCNTs, the 24?h EC₅₀ values of TiO₂-NPs and MWCNTs to Nitzschia frustulum were 20.75 and 24.64?mg?L^?1, respectively. Significant decreases of Chl a content after TiO₂-NPs exposures were detected and the Chl a content of N. frustulum was obviously increased by MWCNTs treatment at lower concentration. The ROS was detected in N. frustulum after TiO₂-NPs and MWCNTs exposures. The MDA content was significantly induced by TiO₂-NPs at lower concentrations of 24 and 48?h exposure; meanwhile, it increased at all tested concentrations at 24?h MWCNTs exposure. The SOD enzyme was induced by 72 and 96?h TiO₂-NPs exposure, and increased by MWCNTs treatment at 96?h in N. frustulum. Scanning electron microscopy results revealed that N. frustulum had obvious cell deformation after TiO₂-NPs treatment. The result showed that the physiological and biochemical response mechanisms after NPs exposure of diatom were species-specific, and in relation to the exposure concentration and time.     

Photocatalytic formation of hydrogen peroxide over highly porous illuminated ZnO and TiO2thin film

The photocatalytic formation of hydrogen peroxide over ZnO and TiO₂thin films has been investigated in aqueous phase in the presence of molecular oxygen as an electron acceptor. These films are highly porous and showed enhanced catalytic activity in the photochemical formation of hydrogen peroxide. The amount of H₂O₂formed during 2 hour light illumination is 4–6 μM and the rates of formation of hydrogen peroxide of both the films are almost comparable. The yield of hydrogen peroxide increases with the increase in irradiation time and a trend of steady state concentration of H₂O₂is observed in the case of TiO₂thin film. Photodissolution of ZnO particles is observed in some extent during the process of prolonged UV light illumination.