Precise regulation of acid pretreatment for red mud SCR catalyst: Targeting on optimizing the acidity and reducibility

• The optimum SCR activity was realized by tuning the acid pretreatment. • Optimized catalysts showed NO_x conversion above 90%. • The NH₃ and NO adsorption capacity of Al-O₃-Fe is stronger than Fe-O₃-Fe. • The formation of almandine consumes Fe³⁺ and Al³⁺ and weakens their interaction. Red mud (RM), as an alkaline waste, was recently proved to be a promising substitute for the SCR catalyst. Dealkalization could improve the acidity and reducibility of red mud, which were critical for SCR reaction. However, the dealkalization effect depended on the reaction between acid solution and red mud. In this study, we realized the directional control of the chemical state of active sites through tuning the acid pretreatment (dealkalization) process. The pretreatment endpoint was controlled at pH values of 3–5 with diluted nitric acid. When the pH values of red mud were 3 and 5 (CRM-3 and CRM-5), activated catalysts showed NO_x conversion above 90% at 275°C–475°C. The high initial reaction rate, Ce³⁺/(Ce³⁺ + Ce⁴⁺) ratio, and surface acidity accounted for the excellent SCR performance of CRM-5 catalyst. Meanwhile, more Fe³⁺ on the CRM-3 surface improved the NH₃ adsorption. There was a strong interaction between Al and Fe in both CRM-5 and CRM-3 catalysts. DFT results showed that the adsorption capacity of the Al-O₃-Fe for NH₃ and NO is stronger than that of Fe-O₃-Fe, which enhanced the NO_x conversion of the catalyst. However, the almandine was formed in CRM-4, consumed part of Fe³⁺ and Al³⁺, and the interaction between Al and Fe was weakened. Also, deposited almandine on the catalyst surface covered the active sites, thus leading to lower NH₃-SCR activity.     

PM-support interfacial effect and oxygen mobility in Pt,Pd or Rh-loaded (Ce,Zr,La)O2 catalysts

• Pt/CZL exhibits the optimum catalytic performance for HC and NO_x elimination. • The strong PM-Ce interaction favors the oxygen mobility and DOSC. • Pd/CZL shows higher catalytic activity for CO conversion due to more O_latt species. • Great oxygen mobility at high temperature broadens the dynamic operation window. • The relationship between DOSC and catalytic performance is revealed. The physicochemical properties of Pt-, Pd- and Rh- loaded (Ce,Zr,La)O₂ (shorted for CZL) catalysts before/after aging treatment were systematically characterized by various techniques to illustrate the relationship of the dynamic oxygen storage/release capacity and redox ability with their catalytic performances for HC, NO_x and CO conversions. Pt/CZL catalyst exhibits the optimum catalytic performance for HC and NO_x elimination, which mainly contribute to its excellent redox ability and dynamic oxygen storage/release capacity (DOSC) at lower temperature due to the stronger PM (precious metals)-support interaction. However, the worse stability of Pt-O-Ce species and volatile Pt oxides easily result in the dramatical decline in catalytic activity after aging. Pd/CZL shows higher catalytic activity for CO conversion by reason of more O_latt species as the active oxygen for CO oxidation reaction. Rh/CZL catalyst displays the widest dynamic operation window for NO_x elimination as a result of greater oxygen mobility at high temperature, and the ability to retain more Rh-O-Ce species after calcined at 1100°C effectively restrains sintering of active RhO_x species, improving the thermal stability of Rh/CZL catalyst.     

CeO2 doping boosted low-temperature NH3-SCR activity of FeTiOx catalyst: A microstructure analysis and reaction mechanistic study

• CeO₂ doping significantly improved low-temperature NH₃-SCR activity on FeTiO_x. • The crystallinity of FeTiO_x was decreased dramatically after CeO₂ doping. • Unique Ce-O-Fe structure in FeCe_0.2TiO_x accounted for its superior redox property. • Facile activation of NH₃ to-NH₂ on FeCe_0.2TiO_x promoted the DeNO_x efficiency. FeTiO_x has been recognized as an environmental-friendly and cost-effective catalyst for selective catalytic reduction (SCR) of NO_x with NH₃. Aimed at further improving the low-temperature DeNO_x efficiency of FeTiO_x catalyst, a simple strategy of CeO₂ doping was proposed. The low-temperature (<250℃) NH₃-SCR activity of FeTiO_x catalyst could be dramatically enhanced by CeO₂ doping, and the optimal composition of the catalyst was confirmed as FeCe_0.2TiO_x, which performed a NO_x conversion of 90% at ca. 200℃. According to X-ray diffraction (XRD), Raman spectra and X-ray absorption fine structure spectroscopy (XAFS) analysis, FeCe_0.2TiO_x showed low crystallinity, with Fe and Ce species well mixed with each other. Based on the fitting results of extended X-ray absorption fine structure (EXAFS), a unique Ce-O-Fe structure was formed in FeCe_0.2TiO_x catalyst. The well improved specific surface area and the newly formed Ce-O-Fe structure dramatically contributed to the improvement of the redox property of FeCe_0.2TiO_x catalyst, which was well confirmed by H₂-temperature-programmed reduction (H₂-TPR) and in situ XAFS experiments. Such enhanced redox capability could benefit the activation of NO and NH₃ at low temperatures for NO_x removal. The detailed reaction mechanism study further suggested that the facile oxidative dehydrogenation of NH₃ to highly reactive-NH₂ played a key role in enhancing the low-temperature NH₃-SCR performance of FeCe_0.2TiO_x catalyst.     

Promotional effect of ion-exchanged K on the low-temperature hydrothermal stability of Cu/SAPO-34 and its synergic application with Fe/Beta catalysts

• K⁺ hinder the structural degradation of Cu/SAPO-34 under humid condition<100°C. • K⁺ on Cu/SAPO-34 brings lower acidity and inferior SCR activity at high temperature. • Fe/Beta was used to compensate the low activity of Cu/SAPO-34 at high temperature. • The hybrid catalysts with KCu/SAPO-34 and Fe/Beta show a great potential for using. K ions were introduced onto Cu/SAPO-34 catalysts via the ion-exchange process in order to improve their stability under low-temperature hydrothermal aging. The changes in structure and copper-species contents of these catalysts upon hydrothermal aging were probed in order to investigate their effects on selective catalytic reduction (SCR) activity. For the fresh Cu/SAPO-34 catalysts, K ions had little influence on the chabazite framework but effected their acidities by exchanging with acid sites. After hydrothermal aging, the structural integrity and amount of active sites decreased on pure Cu/SAPO-34. While the K-loaded catalysts showed improved chabazite structure, acidity, and active site conservation with increasing K loading. However, although the 0.7 wt% K catalyst maintained the same crystallinity, active site abundance, and low-temperature SCR activity as the fresh catalyst upon aging, an apparent decrease in SCR activity at high temperature was observed because of the inevitable decrease in the number of Brönsted acid sites. To compensate for the activity disadvantage of K-loaded Cu/SAPO-34 at high temperature, Fe/Beta catalysts were co-employed with K-loaded Cu/SAPO-34, and a wide active temperature window of SCR activity was obtained. Thus, our study reveals that a combined system comprising Fe/Beta and K-loaded Cu/SAPO-34 catalysts shows promise for the elimination of NO_x in real-world applications.     

In situ electron-induced reduction of NOx via CNTs activated by DBD at low temperature

• An in situ electron-induced deNO_x process with CNT activated by DBD was achieved. • Carbon atoms on CNT surface were verified to be excited by plasma in DBD-CNT system. • Reactions between NO_x and excited C result in synergistic effect of DBD-CNT system. In this study, a new in situ electron-induced process is presented with carbon nanotubes (CNTs) as a reduction agent activated by dielectric barrier discharge (DBD) for nitrogen oxide (NO_x) abatement at low temperature (<407 K). Compared with a single DBD system and a DBD system with activated carbon (DBD-AC), a DBD system with carbon nanotubes (DBD-CNT) showed a significant promotion of NO_x removal efficiency and N₂ selectivity. Although the O₂ content was 10%, the NO_x conversion and N₂ selectivity in the DBD-CNT system still reached 64.9% and 81.9% at a specific input energy (SIE) of 1424 J/L, and these values decreased to 16.8%, 31.9% and 43.2%, 62.3% in the single DBD system and the DBD-AC system, respectively. X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) were utilized to investigate surface changes in the CNTs after activation by DBD to explore the NO_x reduction abatement mechanism of this new process. Furthermore, the outlet gas components were also observed via Fourier transform infrared spectroscopy (FTIR) to help reveal the NO_x reduction mechanism. Experimental results verified that carbon atoms excited by DBD and the structure of CNTs contributed to the synergistic activity of the DBD-CNT system. The new deNO_x process was accomplished through in situ heterogenetic reduction reactions between the NO_x and carbon atoms activated by the plasma on the CNTs. In addition, further results indicated that the new deNO_x process exhibited acceptable SO₂ tolerance and water resistance.     

Enhancement of the polynomial functions response surface model for real-time analyzing ozone sensitivity

• The calculation process and algorithm of response surface model (RSM) were enhanced. • The prediction errors of RSM in the margin and transition areas were greatly reduced. • The enhanced RSM was able to analyze O₃-NO_x-VOC sensitivity in real-time. • The O₃ formations were mainly sensitive to VOC, for the two case study regions. Quantification of the nonlinearities between ambient ozone (O₃) and the emissions of nitrogen oxides (NO_x) and volatile organic compound (VOC) is a prerequisite for an effective O₃ control strategy. An Enhanced polynomial functions Response Surface Model (Epf-RSM) with the capability to analyze O₃-NO_x-VOC sensitivities in real time was developed by integrating the hill-climbing adaptive method into the optimized Extended Response Surface Model (ERSM) system. The Epf-RSM could single out the best suited polynomial function for each grid cell to quantify the responses of O₃ concentrations to precursor emission changes. Several comparisons between Epf-RSM and pf-ERSM (polynomial functions based ERSM) were performed using out-of-sample validation, together with comparisons of the spatial distribution and the Empirical Kinetic Modeling Approach diagrams. The comparison results showed that Epf-RSM effectively addressed the drawbacks of pf-ERSM with respect to over-fitting in the margin areas and high biases in the transition areas. The O₃ concentrations predicted by Epf-RSM agreed well with Community Multi-scale Air Quality simulation results. The case study results in the Pearl River Delta and the north-western area of the Shandong province indicated that the O₃ formations in the central areas of both the regions were more sensitive to anthropogenic VOC in January, April, and October, while more NO_x-sensitive in July.     

Electro-catalytic activity of CeOx modified graphite felt for carbamazepine degradation via E-peroxone process

•CeO_x/GF-EP process had the better degradation efficiency than GF-EP process. •CeO_x/GF-EP process had the flexible application in the pH range from 5.0 to 9.0. •CeO_x could enhance surface hydrophilicity and reduce the charge-transfer resistance. •The interfacial electron transfer process was revealed. E-peroxone (EP) was one of the most attractive AOPs for removing refractory organic compounds from water, but the high energy consumption for in situ generating H₂O₂ and its low reaction efficiency for activating O₃ under acidic conditions made the obstacles for its practical application. In this study, cerium oxide was loaded on the surface of graphite felt (GF) by the hydrothermal method to construct the efficient electrode (CeO_x/GF) for mineralizing carbamazepine (CBZ) via EP process. CeO_x/GF was an efficient cathode, which led to 69.4% TOC removal in CeO_x/GF-EP process with current intensity of 10 mA in 60 min. Moreover, CeO_x/GF had the flexible application in the pH range from 5.0 to 9.0, TOC removal had no obvious decline with decrease of pH. Comparative characterizations showed that CeO_x could enhance surface hydrophilicity and reduce the charge-transfer resistance of GF. About 5.4 mg/L H₂O₂ generated in CeO_x/GF-EP process, which was 2.1 times as that in GF-EP process. The greater ozone utility was also found in CeO_x/GF-EP process. More O₃ was activated into hydroxyl radicals, which accounted for the mineralization of CBZ. An interfacial electron transfer process was revealed, which involved the function of oxygen vacancies and Ce³⁺/Ce⁴⁺ redox cycle. CeO_x/GF had the good recycling property in fifth times’ use.     

Dual-functional sites for synergistic adsorption of Cr(VI) and Sb(V) by polyaniline-TiO2 hydrate: Adsorption behaviors,sites and mechanisms

• PANI/Ti(OH)_n^(4–n)+ exhibited excellent adsorption capacity and reusability. • Adsorption sites of Cr(VI) were hydroxyl, amino/imino group and benzene rings. • Sb(V) was adsorbed mainly through hydrogen bonds and Ti-O-Sb. • The formation of Cr-O-Sb in dual system demonstrated the synergistic adsorption. • PANI/TiO₂ was a potential widely-applied adsorbent and worth further exploring. Removal of chromium (Cr) and antimony (Sb) from aquatic environments is crucial due to their bioaccumulation, high mobility and strong toxicity. In this work, a composite adsorbent consisting of Ti(OH)_n^(4–n)+ and polyaniline (PANI) was designed and successfully synthesized by a simple and eco-friendly method for the uptake of Cr(VI) and Sb(V). The synthetic PANI/TiO₂ composites exhibited excellent adsorption capacities for Cr(VI) and Sb(V) (394.43 mg/g for Cr(VI) and 48.54 mg/g for Sb(V)), wide pH applicability and remarkable reusability. The adsorption of Cr(VI) oxyanions mainly involved electrostatic attraction, hydrogen bonding and anion-π interactions. Based on X-ray photoelectron spectroscopy and FT-IR analysis, the adsorption sites were shown to be hydroxyl groups, amino/imino groups and benzene rings. Sb(V) was adsorbed mainly through hydrogen bonds and surface complexation to form Ti-O-Sb complexes. The formation of Cr-O-Sb in the dual system demonstrated the synergistic adsorption of Cr(VI) and Sb(V). More importantly, because of the different adsorption sites, the adsorption of Cr(VI) and Sb(V) occurred independently and was enhanced to some extent in the dual system. The results suggested that PANI/TiO₂ is a promising prospect for practical wastewater treatment in the removal of Cr(VI) and Sb(V) from wastewater owing to its availability, wide applicability and great reusability.     

Overlooked nitrogen-cycling microorganisms in biological wastewater treatment

• AOA and comammox bacteria can be more abundant and active than AOB/NOB at WWTPs. • Coupled DNRA/anammox and NO_x-DAMO/anammox/comammox processes are demonstrated. • Substrate level, SRT and stressors determine the niches of overlooked microbes. • Applications of overlooked microbes in enhancing nitrogen removal are promising. Nitrogen-cycling microorganisms play key roles at the intersection of microbiology and wastewater engineering. In addition to the well-studied ammonia oxidizing bacteria, nitrite oxidizing bacteria, heterotrophic denitrifiers, and anammox bacteria, there are some other N-cycling microorganisms that are less abundant but functionally important in wastewater nitrogen removal. These microbes include, but not limited to ammonia oxidizing archaea (AOA), complete ammonia oxidation (comammox) bacteria, dissimilatory nitrate reduction to ammonia (DNRA) bacteria, and nitrate/nitrite-dependent anaerobic methane oxidizing (NO_x-DAMO) microorganisms. In the past decade, the development of high-throughput molecular technologies has enabled the detection, quantification, and characterization of these minor populations. The aim of this review is therefore to synthesize the current knowledge on the distribution, ecological niche, and kinetic properties of these “overlooked” N-cycling microbes at wastewater treatment plants. Their potential applications in novel wastewater nitrogen removal processes are also discussed. A comprehensive understanding of these overlooked N-cycling microbes from microbiology, ecology, and engineering perspectives will facilitate the design and operation of more efficient and sustainable biological nitrogen removal processes.     

Simultaneous removal of NOx and chlorobenzene on V2O5/TiO2 granular catalyst: Kinetic study and performance prediction

• A V₂O₅/TiO₂ granular catalyst for simultaneous removal of NO and chlorobenzene. • Catalyst synthesized by vanadyl acetylacetonate showed good activity and stability. • The kinetic model was established and the synergetic activity was predicted. • Both chlorobenzene oxidation and SCR of NO follow pseudo-first-order kinetics. • The work is of much value to design of multi-pollutants emission control system. The synergetic abatement of multi-pollutants is one of the development trends of flue gas pollution control technology, which is still in the initial stage and facing many challenges. We developed a V₂O₅/TiO₂ granular catalyst and established the kinetic model for the simultaneous removal of NO and chlorobenzene (i.e., an important precursor of dioxins). The granular catalyst synthesized using vanadyl acetylacetonate precursor showed good synergistic catalytic performance and stability. Although the SCR reaction of NO and the oxidation reaction of chlorobenzene mutually inhibited, the reaction order of each reaction was not considerably affected, and the pseudo-first-order reaction kinetics was still followed. The performance prediction of this work is of much value to the understanding and reasonable design of a catalytic system for multi-pollutants (i.e., NO and dioxins) emission control.     

Organophosphate esters in sediment from Taihu Lake,China: Bridging the gap between riverine sources and lake sinks

• Eleven OPEs were detected in river sediment and lake sediment in Taihu Lake. • TnBP dominated in river sediment, while TBEP dominated in lake sediment. • A strong correlation existed between logK_oc and logK_ow of OPEs. • Vertical profiles of OPEs in sediment cores varied according to sampling location. Surface sediment samples from Taihu Lake in China and its inflow rivers, along with two lake sediment core samples, were collected and analyzed for organophosphate esters (OPEs). The concentrations of total OPEs varied from 28.60 ng/g to 158.72 ng/g (median: 54.25 ng/g) in river surface sediment and from 62.57 ng/g to 326.84 ng/g (median: 86.37 ng/g) in lake sediment. Tributyl phosphate (TnBP) was the predominant compound in river surface sediment, and tris(2-butoxyethyl) phosphate was predominant in lake sediment. High contamination occurred in the north-west region, which was related to the high level of urbanization and high usage of OPEs. The sediment–water partition coefficients of OPEs (logK_oc) were calculated, showing a significant correlation with logK_ow (p<0.05). The concentration and composition of OPEs in two sediment cores varied due to the different sampling locations, with more OPE species found in the northern region than in the southern one. Principal component analysis and positive matrix factorization indicated that sewage discharges, vehicle emissions, and atmospheric deposition were the possible sources of OPEs in Taihu Lake sediments. Tris(1-chloro-2-propyl) phosphate, tris(2-chloroethyl) phosphate, and TnBP were the main OPEs causing ecological risks.     

Utilizing transparent and conductive SnO2 as electron mediator to enhance the photocatalytic performance of Z-scheme Si-SnO2-TiOx

• A novel Z-scheme Si-SnO₂-TiO_x with SnO₂ as electron mediator is first constructed. • Transparent and conductive SnO₂ can pass light through and promote charge transport. • V_O from SnO₂ and TiO_x improve photoelectrochemical performances. • Efficient photocatalytic degradations originate from the Z scheme construction. Z-scheme photocatalysts, with strong redox ability, have a great potential for pollutants degradation. However, it is challenging to construct efficient Z-scheme photocatalysts because of their poor interfacial charge separation. Herein, by employing transparent and conductive SnO₂ as electron mediator to pass light through and promote interfacial charge transportation, a novel Z-scheme photocatalyst Si-SnO₂-TiO_{x (1<x<2)} was constructed. The Z-scheme photocatalyst displayed an order of magnitude higher photocurrent density and a 4-fold increase in open-circuit potential compared to those of Si. Moreover, the onset potential shifted negatively for approximately 2.2 V. Benefiting from these advantages, this Z-scheme Si-SnO₂-TiO_x exhibited efficient photocatalytic performance toward phenol degradation and mineralization. 75% of the phenol was degraded without bias potential and 70% of the TOC was removed during phenol degradation. Other typical pollutants such as bisphenol A and atrazine could also be degraded without bias potential. Introducing a transparent and conductive electron mediator to construct Z-scheme photocatalyst gives a new sight to the improvement of photocatalytic performance in Z scheme.     

Impact of anthropogenic heat emissions on meteorological parameters and air quality in Beijing using a high-resolution model simulation

• The Large scale Urban Consumption of energY model was updated and coupled with WRF. • Anthropogenic heat emissions altered the precipitation and its spatial distribution. • A reasonable AHE scheme could improve the performance of simulated PM_2.5. • AHE aggravated the O₃ pollution in urban areas. Anthropogenic heat emissions (AHE) play an important role in modulating the atmospheric thermodynamic and kinetic properties within the urban planetary boundary layer, particularly in densely populated megacities like Beijing. In this study, we estimate the AHE by using a Large-scale Urban Consumption of energY (LUCY) model and further couple LUCY with a high-resolution regional chemical transport model to evaluate the impact of AHE on atmospheric environment in Beijing. In areas with high AHE, the 2-m temperature (T₂) increased to varying degrees and showed distinct diurnal and seasonal variations with maxima in night and winter. The increase in 10-m wind speed (WS₁₀) and planetary boundary layer height (PBLH) exhibited slight diurnal variations but showed significant seasonal variations. Further, the systematic continuous precipitation increased by 2.1 mm due to the increase in PBLH and water vapor in upper air. In contrast, the precipitation in local thermal convective showers increased little because of the limited water vapor. Meanwhile, the PM_2.5 reduced in areas with high AHE because of the increase in WS₁₀ and PBLH and continued to reduce as the pollution levels increased. In contrast, in areas where prevailing wind direction was opposite to that of thermal circulation caused by AHE, the WS₁₀ reduced, leading to increased PM_2.5. The changes of PM_2.5 illustrated that a reasonable AHE scheme might be an effective means to improve the performance of PM_2.5 simulation. Besides, high AHE aggravated the O₃ pollution in urban areas due to the reduction in NO_x.     

Mechanism of dichloromethane disproportionation over mesoporous TiO2 under low temperature

• Mechanism of DCM disproportionation over mesoporous TiO₂ was studied. • DCM was completely eliminated at 350℃ under 1 vol.% humidity. • Anatase (001) was the key for disproportionation. • A competitive oxidation route co-existed with disproportionation. • Disproportionation was favored at low temperature. Mesoporous TiO₂ was synthesized via nonhydrolytic template-mediated sol-gel route. Catalytic degradation performance upon dichloromethane over as-prepared mesoporous TiO₂, pure anatase and rutile were investigated respectively. Disproportionation took place over as-made mesoporous TiO₂ and pure anatase under the presence of water. The mechanism of disproportionation was studied by in situ FTIR. The interaction between chloromethoxy species and bridge coordinated methylenes was the key step of disproportionation. Formate species and methoxy groups would be formed and further turned into carbon monoxide and methyl chloride. Anatase (001) played an important role for disproportionation in that water could be dissociated into surface hydroxyl groups on such structure. As a result, the consumed hydroxyl groups would be replenished. In addition, there was another competitive oxidation route governed by free hydroxyl radicals. In this route, chloromethoxy groups would be oxidized into formate species by hydroxyl radicals transfering from the surface of TiO₂. The latter route would be more favorable at higher temperature.     

Enhanced catalytic oxidation of 2,4-dichlorophenol via singlet oxygen dominated peroxymonosulfate activation on CoOOH@Bi2O3 composite

• Bi₂O₃ cannot directly activate PMS. • Bi₂O₃ loading increased the specific surface area and conductivity of CoOOH. • Larger specific surface area provided more active sites for PMS activation. • Faster electron transfer rate promoted the generation of reactive oxygen species. • ¹O₂ was identified as dominant ROS in the CoOOH@Bi₂O₃/PMS system. Cobalt oxyhydroxide (CoOOH) has been turned out to be a high-efficiency catalyst for peroxymonosulfate (PMS) activation. In this study, CoOOH was loaded on bismuth oxide (Bi₂O₃) using a facile chemical precipitation process to improve its catalytic activity and stability. The result showed that the catalytic performance on the 2,4-dichlorophenol (2,4-DCP) degradation was significantly enhanced with only 11 wt% Bi₂O₃ loading. The degradation rate in the CoOOH@Bi₂O₃/PMS system (0.2011 min⁻¹) was nearly 6.0 times higher than that in the CoOOH/PMS system (0.0337 min⁻¹). Furthermore, CoOOH@Bi₂O₃ displayed better stability with less Co ions leaching (16.4% lower than CoOOH) in the PMS system. These phenomena were attributed to the Bi₂O₃ loading which significantly increased the conductivity and specific surface area of the CoOOH@Bi₂O₃ composite. Faster electron transfer facilitated the redox reaction of Co (III) / Co (II) and thus was more favorable for reactive oxygen species (ROS) generation. Meanwhile, larger specific surface area furnished more active sites for PMS activation. More importantly, there were both non-radical (¹O₂) and radicals (SO₄⁻•, O₂⁻•, and OH•) in the CoOOH@Bi₂O₃/PMS system and ¹O₂ was the dominant one. In general, this study provided a simple and practical strategy to enhance the catalytic activity and stability of cobalt oxyhydroxide in the PMS system.     

Tailoring the simultaneous abatement of methanol and NOx on Sb-Ce-Zr catalysts via copper modification

● Cu addition enhances CH₃OH oxidation and alleviates its inhibitory effect on SCR. ● Cu addition improves the activation of SCR reactants in the presence of methanol. ● Damaged structure by more Cu addition decreases specific surface area and acidity. ● Excessive Cu addition would lead to the narrowing of SCR temperature window. Simultaneously removal of NO_x and VOCs over NH₃-SCR catalysts have attracted lots of attention recently. However, the presence of VOCs would have negative effect on deNO_x efficiency especially at low temperature. In this study, copper modification onto Sb_0.5CeZr₂O_x (SCZ) catalyst were performed to enhance the catalytic performance for simultaneous control of NO_x and methanol. It was obtained that copper addition could improve the low-temperature activity of both NO_x conversion and methanol oxidation, where the optimal catalyst (Cu_0.05SCZ) exhibited a deNO_x activity of 96% and a mineralization rate of 97% at 250 °C, which are around 10% higher than that of Cu free sample. The characterization results showed that copper addition could obviously enhance the redox capacity of the catalysts. As such, the inhibition effect of methanol incomplete oxidation on NO adsorption and NH₃ activation were then lessened and the conversion of surface formamide species were also accelerated, resulting in the rising of NO_x conversion at low temperature. However, excessive copper addition would damage the Sb-Ce-Zr oxides solid solution structure owing to Cu-Ce strong interactions, decreasing the surface area and acidity. Meanwhile, due to easier over-oxidation of NH₃ with more Cu addition, the temperature window for NO_x conversion would become quite narrow. These findings could provide useful guidelines for the synergistic removal of VOCs over SCR catalyst in real application.     

TiO2@palygorskite composite for the efficient remediation of oil spills via a dispersion-photodegradation synergy

• A novel and multi-functional clay-based oil spill remediation system was constructed. • TiO₂@PAL functions as a particulate dispersant to break oil slick into tiny droplets. • Effective dispersion leads to the direct contact of TiO₂ with oil pollutes directly. • TiO₂ loaded on PAL exhibits efficient photodegradation for oil pollutants. • TiO₂@PAL shows a typical dispersion-photocatalysis synergistic remediation. Removing spilled oil from the water surface is critically important given that oil spill accidents are a common occurrence. In this study, TiO₂@Palygorskite composite prepared by a simple coprecipitation method was used for oil spill remediation via a dispersion-photodegradation synergy. Diesel could be efficiently dispersed into small oil droplets by TiO₂@Palygorskite. These dispersed droplets had an average diameter of 20–30 mm and exhibited good time stability. The tight adsorption of TiO₂@Palygorskite on the surface of the droplets was observed in fluorescence and SEM images. As a particulate dispersant, the direct contact of TiO₂@Palygorskite with oil pollutants effectively enhanced the photodegradation efficiency of TiO₂ for oil. During the photodegradation process, •O₂⁻and •OH were detected by ESR and radical trapping experiments. The photodegradation efficiency of diesel by TiO₂@Palygorskite was enhanced by about 5 times compared with pure TiO₂ under simulated sunlight irradiation. The establishment of this new dispersion-photodegradation synergistic remediation system provides a new direction for the development of marine oil spill remediation.     

Persistent free radicals in humin under redox conditions and their impact in transforming polycyclic aromatic hydrocarbons

• Regulation of redox conditions promotes the generation of free radicals on HM. • HM-PFRs can be fractionated into active and inactive types depending on stability. • The newly produced PFRs readily release electrons to oxygen and generate ROS. • PFR-induced ROS mediate the transformation of organic contaminants adsorbed on HM. The role of humic substance-associated persistent free radicals (PFRs) in the fate of organic contaminants under various redox conditions remains unknown. This study examined the characterization of original metal-free peat humin (HM), and HM treated with varying concentrations of H₂O₂ and L-ascorbic acid (VC) (assigned as H₂O₂-HM and VC-HM). The concentration of PFRs in HM increased with the addition of VC/H₂O₂ at concentrations less than 0.08 M. The evolution of PFRs in HM under different environmental conditions (e.g., oxic/anoxic and humidity) was investigated. Two types of PFRs were detected in HM: a relatively stable radical existed in the original sample, and the other type, which was generated by redox treatments, was relatively unstable. The spin densities of VC/H₂O₂-HM readily returned to the original value under relatively high humidity and oxic conditions. During this process, the HM-associated “unstable” free radicals released an electron to O₂, inducing the formation of reactive oxygen species (ROS, i.e., ^•OH and ^•O₂⁻). The generated ROS promoted the degradation of polycyclic aromatic hydrocarbons based on the radical quenching measurements. The transformation rates followed the order naphthalene>phenanthrene>anthracene>benzo[a]pyrene. Our results provide valuable insight into the HM-induced transformation of organic contaminants under natural conditions.     

Predicting non-carcinogenic hazard quotients of heavy metals in pepper (Capsicum annum L.) utilizing electromagnetic waves

• There was significant absorption of heavy metals by the pepper in contaminated soils. • The target hazard quotient (THQ) indices followed the order of Pb>Zn>>Cd » Ni. • Relationships exist between contaminated plants and electromagnetic wave. • PCA and random search can select the main spectra and predict THQ for each element. Given the tendency of heavy metals to accumulate in soil and plants, the purpose of this study was to determine the contamination levels of Cd, Ni, Pb, and Zn on peppers (leaves and fruit) grown in contaminated soils in industrial centers. For this purpose, we measured the uptake of the four heavy metals by peppers grown in the heavy metal contaminated soils throughout the four growth stages: two-leaf, growth, flowering, and fruiting, and calculated various vegetation indices to evaluate the heavy metal contamination potentials. Electromagnetic waves were also applied for analyzing the responses of the target plants to various heavy metals. Based on the relevant spectral bands identified by principal component analysis (PCA) and random search methods, a regression method was then employed to determine the most optimal spectral bands for estimating the target hazard quotient (THQ). The THQ was found to be the highest in the plants contaminated by Pb (THQ= 62) and Zn (THQ= 5.07). The results of PCA and random search indicated that the spectra at the bands of b₅₇₀, b₆₅₀, and b₇₆₀ for Pb, b₄₀₀ and b₁₀₃₀ for Ni, b₄₀₀ and b₈₈₀ for Cd, and b₅₆₀, b₉₁₀, and b₁₀₅₀ for Zn were the most optimal spectra for assessing THQ. Therefore, in future studies, instead of examining the amount of heavy metals in plants by chemical analysis in the laboratory, the responses of the plants to the electromagnetic waves in the identified bands can be readily investigated in the field based on the established correlations.     

Assessment of popular techniques for co-processing municipal solid waste in Chinese cement kilns

• Municipal solid waste (MSW) was fermented, screened, gasified, then co-processed. • Co-processing MSW in cement kilns could cause excessive pollutant emissions. • Bypass flue gas can be disposed of through the main flue system. • Popular MSW co-processing methods do not affect cement quality. Cement kiln co-processing techniques have been developed in the past 20 years in China, and more than 60 factories now use fermentation, screening, and gasification pre-treatment techniques to co-process municipal solid waste (MSW). There three complete MSW pre-treatment techniques, co-processing procedures, and environmental risk assessments have been described in few publications. In this study, we assessed the effectiveness of each technique. The results suggested that the pollutant content released by each pre-treatment technology was lower than the emission standard. To reveal the mechanisms of pollutant migration and enrichment, the substances in the kiln and kiln products are investigated. The input of co-processing materials (Co-M) produced by fermentation caused formation of polychlorinated dibenzo-p-dioxins and dibenzofuran (PCDD/Fs) in the bypass flue gas (By-gas) in excess of the regulatory standard. The Co-M input produced by the screening and gasifier technologies caused the total organic carbon (TOC) concentration to exceed the standard. In addition, the NO_x, TOC, and PCDD/Fs in the By-gas exceeded the regulatory standard. Raw meal was the primary chlorine and heavy metals input stream, and clinker (CK) and cement kiln dust (CKD) accounted for>90% of the total chlorine output stream. Flue gas and CKD were the primary volatile heavy metal (Hg) output streams. Greater than 70% of the semi-volatile heavy metals (Cd, Pb, Tl and Se) distributed in hot raw meal and bypass cement kiln dust. The low-volatility heavy metals were concentrated in the CK. These results indicated that co-processing techniques used in China still require improvement.