螺旋升流反应器氧传递性能的试验研究

本文主要针对螺旋升流反应器技术特性，对工艺的好氧反应器进行了氧传递性能的试验研究，考察了反应器水深、曝气量等对螺旋升流反应器氧转移过程的影响；并对试验数据进行回归，得到了氧传质总系数与螺旋升流反应器内表现气速的数学关系。试验结果表明，螺旋升流反应器具有良好的氧传递特性，是一种新型的高效、节能的污水处理反应技术。     

Evaporative Cooling of Water in a Small Vessel Under Varying Ambient Humidity

Evaporative cooling of water in a small porous clay vessel was studied under controlled humidity conditions. In steady-state experiments performed at an ambient temperature of 23 °C, the cooling effect increased from 4.7 to 8.3 °C as the ambient relative humidity decreased from 60 to 15%. External heat and mass transfer coefficients, estimated from the steady-state measurements, were used in mathematical models to predict the experimentally observed transient temperature variation of the water under ramp changes of the ambient relative humidity. With a prototypical cool chamber containing water tested in Kolkata, India under an ambient temperature of 34.5–35 °C, the cooling effect reached a maximum of 7 °C between 3 and 3:30 PM and then declined to 4.5 °C around 6 PM.     

我国环境技术转移模式与运行保障机制的研究

全面阐述了我国环境技术成果转化推广机制建设取得的积极进展,以及当前存在的困难和问题;基于环境技术转移体制机制的内涵,提出了环境技术转化转移机制建设应遵循的四项原则;论述了环境技术转化转移模式选择和六项保障环境技术转化转移能动健康运行的保障机制性措施。     

CHANGING TIMES FOR WATER RESEARCH AND TECHNOLOGY TRANSFER1

In recent years, important changes have occurred in water resources research. There have been major shifts in attitudes of Congress, state legislatures and the general public toward water and related resource issues. Future water research and development will have to be environmentally oriented. Emphasis is shifting to research productivity. To justify research expenditures, hard facts must be produced which demonstrate payoff. Technology transfer (getting research results into the hands of users in an understandable and usable form) is gaining prominence. Research projects must be designed for total problem solution and technology transfer must be incorporated as a part of project objectives. Research must be planned and conducted to meet users' needs. Guidelines for modern research design and technology transfer are presented.     

The convective hot air drying of Lactuca sativa slices

The storage of fresh agricultural products is not easy because of its high moisture. Dehydration is an efficient preservation method. The investigation of drying modeling and transfer characteristics are important for selecting operating conditions and equipment design. The drying behavior of Lactuca sativa slices, with the thickness of 2 mm, was investigated at 60.0–80.0°C and 0.60–1.04 m sec^?1 velocity in a convective hot air drier. The mass transfer during the drying process was described using six thin drying models. The convective heat transfer coefficient α and mass transfer coefficient k_H were finally calculated. The results showed that the drying process could be separated into three stages including accelerating rate, constant rate, and falling rate period, which was influenced by hot air temperature and velocity, and the Modi?ed Page model agreed well with the experimental data. When the operating temperature was increased from 60.0°C to 80.0°C, α was found increased from 88.07 to 107.93 W·m^?2·K^?1, and k_H increased from 46.32 × 10^–3 to 68.04 × 10^–3 kg·m^?2·sec^?1·ΔH^?1. With the increase of air velocity from 0.60 to 1.04 m·sec^?1, α was increased from 78.85 to 101.35 W·m^?2·K^?1, and k_H was enhanced from 51.78 × 10^–3 to 65.85 × 10^–3 kg·m^?2·sec^?1·ΔH^?1.     

OPTIMUM DESIGN OF INTERBASIN TUNNEL SYSTEMS1

Interbasin water transfer is often accomplished by tunnel systems discharging the water from subreservoirs into a main reservoir. Such a system involving an arbitrary number of reservoirs is considered and an iterative method is developed for the determination of all tunnel sizes giving minimum total cost of the system when the individual discharges from the subreservoirs and elevations of the water surfaces of all reservoirs are known. It is assumed that all tunnels are flowing full. Influence of average construction cost per unit volume as well as tunnel roughness and cross-sectional shape is taken into consideration. The corresponding computer program for the general case is presented. The method may also be adapted to pipe systems, open channel systems, or combined systems by introduction of the proper cost functions for these conduits.     

The effects of component dimensions on heat transfer and pressure loss in shell and tube heat exchangers

In this study, the effects of geometric properties such as baffle spacing, baffle cut, sealing strips, gaps between heat exchanger components, number of tubes and tube passes have been investigated for shell and tube heat exchangers (STHE). For this purpose, geometrical dimensions and data of a specific heat exchanger (HE) used in an industrial application have been obtained. The HTRI Xchanger Suite Educational software was utilized to analyze the reference HE, to verify the results of the software and the output temperatures of the fluids, the shell side heat transfer coefficient (HTC) and the pressure loss (PL) values were compared with the experimental data. After confirming that the results of the software were within the acceptable deviation values, the geometric dimensions of the reference design were changed and new analyzes were carried out to examine the effects of several dimension options on the performance of STHE. Results were discussed in a detailed and comprehensive manner via curves.     

振动冲击试验夹具设计技术研究与实践

阐述了夹具在振动冲击试验中的重要作用和振动冲击试验对夹具使用的材料、尺寸、重量、力学特性、加工制造、安装和连接等要求，介绍了夹具设计的具体过程和测量分析技术，包括确定夹具设计目标参数、搜集相关信息、具体设计步骤和对所设计制造的夹具的传递特性等进行测量和分析的方法。     

The TRIPS Agreement and transfer of climate-change-related technologies to developing countries

Despite numerous international commitments to promote transfer of climate-change-related technologies to developing countries, such transfers are not occurring at a rate fast enough to aid these nations in mitigating and adapting to the effects of climate change. The impact of the WTO Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS) on transfer of these technologies is discussed through a detailed examination of relevant TRIPS provisions. The article also addresses options for improving technology transfer through exploitation of existing TRIPS flexibilities, modification of the Agreement, and other public and private legal and policy avenues.     

农地使用权流转问题的思考

农村土地使用权流转问题不但是我国农村微观机制讨论的热点,而且是我国农地制度变革和完善的见证,也是农村结构调整、生产力水平提高的客观要求。在阐述了农村土地使用权的基本内涵及其多样形式的基础上,从分析我国农村土地使用权的现状出发,阐明了造成土地使用权流转及影响其有序推进的原因。立足于我国土地流转已取得的成效和存在的问题,提出了今后土地使用权流转应该注意的问题和应坚持的原则。     

几种核素在土壤—生物—人体间的积累和转移

本文对Ｕ，Ｋ，＾１３７Ｃｓ，＾９０Ｓｒ等几种核素在土壤－水稻，土壤－茶叶，土壤－蔬菜之间以及水－鱼间的转移情况进行了研究；并考虑到这些核素含量较高的食品（如茶叶、黄豆）不直接全部食入人体，因此，根据人们的饮茶习惯及豆制品（水豆腐）的加工过程进行模拟，对其向人体转移的参数进行了实验研究。由上述实验结果给出了转移参数及相关方程。     

安徽省旅游业转型升级研究——以承接长三角产业转移为例

旅游业作为我国国民经济发展战略性支柱产业的提出,促使各地区进一步加快发展旅游业的步伐。产业转移作为调整产业结构、促进经济发展的重要方式,在旅游业转型升级过程中起到了一定的推动作用。安徽省旅游资源丰富,但总体发展水平不高。通过与长三角地区旅游业发展状况的比较,找出安徽省旅游业发展中的不足之处,分析安徽省旅游业承接产业转移的原因及挑战,并提出相应对策。     

INTERBASIN WATER TRANSFERS IN RIPARIAN STATES: A CASE STUDY OF GEORGIA1

ABSTRACT: Under the riparian doctrine of eastern states, transfers of water to nonriparian lands and, thus, to different river basins, are only possible if the natural flow theory has been modified to allow for reasonable use. Even this adaptation is too nebulous to provide water managers and water users with certainty regarding water transfers. To provide a more precise mechanism for allocating water, 14 eastern states have adopted some form of administrative permitting process. Of these, five states statutorily allow for interbasin transfers of water. Thus far, no states have successfully issued permits for interbasin water transfers but Georgia and South Carolina are positioned to do so. Whether the permitting process will deter court action may rest on the ability of affected parties to negotiate an equitable agreement.     

外商投资的区位变动分析

文章利用1983—2000年的统计数据，通过比较分析方法，分析了我国外商投资区位的转移及其影响因素的变化，综合评价了我国中部5省、华东和西部的区位优势，提出了有利于吸引外商投资的建议。     

Issues concerning the technology transfer of geographic information systems

Many state and local agencies have begun to adopt computer technology as a means of upgrading existing mapping and related practices. These agencies are faced with the dualism of wanting modern technology within a traditional setting and demanding technological independence at the same time. This article is an account of the art of technology transfers, with discussions about the necessary ingredients and constraints in the identification, adaptation, absorption, implementation, diffusion, and evaluation of new technologies. In general, a systematic approach towards the strengthening of endogenous capabilities with sufficient provision for operational and policy changes may be preferable to the idea of comprehensive planning.     

城镇发展中的污染转移问题

中国正处于工业化和快速城镇化时期,随着城镇的蓬勃发展,环境恶化呈现出新的特点,污染转移是重要新特征之一。本文简要论述了中国城镇化水平和城镇建设的战略选择及城镇发展的动力,分析了城镇建设和污染转移之间的关系,重点分析了城镇化过程中污染转移的方式、成因和后果,最后提出了解决这一问题的一些策略。     

COMPUTER PROGRAMMING FOR MAXIMUM MODELING INFORMATION TRANSFER1

Abstract: The diffuculty in understanding the listings of many available hydrologic models programmed in FORTRAN is a serious limitation to their verification and use. By expending more effort in creating clearly written computer programs, more information can be transferred to those interested in modeling hydrologic process. The use of simulation languages to produce more understandable program listings and increase the flow of informationg is recommended. An example is presented in which surface water runoff from storms on small rural watershedds is modeled.     

Performance Model for a Horizontal Tube Falling Film Evaporator

A model is developed to predict the evaporative heat transfer coefficient in a horizontal tube-falling evaporator and has been applied to evaluate overall performance of a desalination unit. Performance variation with different parameters like operation temperature, type of water distribution system, mass flow rate of distilled water inside the exchanger are analyzed. It has been observed that the model is able to predict the trends of heat transfer characteristics of the evaporator reasonably well. However, at low liquid film flow rate conditions, the model overpredicts the heat transfer characteristics marginally. In order to improve the evaporative exchanger performance, it is observed that preheating of the liquid film before injection into the evaporator is desirable. Calculations are also performed to estimate the value of overall heat transfer coefficient for a typical desalination unit.     

Study of the performance of a coolant mixed with an Al2O3/SiC nanomaterial in an engine radiator

One of the important components of a car to control the temperature of a car's engine is the radiator. To increase the heat absorption capacity of the coolant/fluid used in the radiator with minimum pumping power, innovative fluids called nanofluids have become the main area of research these days. Therefore, with the development of new technologies in the field of “nano-materials” and “nano-fluids,” the physical and chemical properties of coolant/fluid can be improved which in turn improves the radiator and engine efficiency, and reduces radiator weight and size. In this article, the heat transfer by forced convection in nanofluids based on Al₂O₃ and SiC was studied experimentally and compared to that of base fluid in an automotive radiator. The nanofluid is mixed with ethylene glycol and the fluid is prepared by the sonication method. The nanofluids were prepared by varying the nanomaterials and the amounts of nanomaterials in the base fluid and their heat transfer performance in the radiator was analyzed using ANSYS FLUENT software. Approximately 15% and 12% increase in radiator efficiency by using Al₂O₃ mixed nanofluid and SiC mixed nanofluid, respectively.     

FEASIBILITY OF INTERBASIN WATER TRANSFER1

ABSTRACT: Interbasin water transfer is one of the most controversial water-resources-planning topics. Local communities, particularly those from which the water is to be taken (donor regions), generate enough opposition to doom many projects to failure. The opposition often arises because planners have traditionally considered excess water a free commodity rather than a marketable resource. To make transfer schemes mutually acceptable to donor and recipient regions, visible benefits must be offered. Agreement must be made on an acceptable purchase price and/or on other benefits such as a substantial amount of low flow augmentation or possibly some degree of flood control on the donor source stream. The hydrologic and economic feasibility of water transfer from the East Susquehanna River basin to the Delaware Reservoir System for supplemental supply to the New York City area was investigated. Nine alternative schemes for diversions up to 400 cfs and compensations in the form of low flow augmentation and/or flood control were considered resulting in unit costs to the recipient region between $90 and $380/mg. If only the minimum state-mandated flow is released to the Susquehanna River, the savings to the water recipients would be sufficient to pay a purchase price of about $21/mg, which would be equivalent to a total amount of $420,000/year for an average export of 100 cfs.