垃圾焚烧飞灰处置与资源化利用研究进展

随着生活垃圾焚烧处理方式的不断推广，焚烧飞灰的产生量也不断增加。按照我国固体废物分类方法，焚烧飞灰属于危险废物，必须进一步处置才能进入填埋场或资源化利用。本文分析了飞灰物理化学特性，论述了常规处置技术（水泥固化、化学药剂稳定化、酸溶剂提取和熔融固化等）存在的问题。将原始飞灰直接应用于水泥、混凝土或路基材料，飞灰中高含量的重金属和盐类会产生新的环境问题。飞灰水洗可以高效去除其中的可溶性盐类，水洗飞灰在焙烧后重金属的浸出浓度远低于原始飞灰烧结后的相应浓度，飞灰水洗-焙烧技术具有很好的应用前景。     

水中重金属在线监测技术探讨

结合重金属在线监测的迫切需求，对重金属检测技术进行了介绍，对重金属在线分析采用的化学比色法和电化学方法作了较为详细的阐述，并对重金属在线监测技术未来的发展趋势进行了预测。对重金属在线监测产品而言，制度的完善是最亟待解决的问题。     

Elemental contaminants in groundwater: A study of trace metals from residential area in the vicinity of an industrial area in Lagos, Nigeria

Groundwater (well water) from a residential area within the vicinity of an industrial estate in Lagos, Nigeria were sampled and analysed by Flame Atomic Absorption Spectroscopy for their heavy metals content. This was with a view of assessing the quality of the water, which was being used for domestic activities, especially, drinking usually without treatment. Total trace metal determination by mineral acid digestion of water samples was applied. This method proved to be better than an extractive concentration technique in the quality assurance protocols with the recovery range being 90.7 ± 0.006–97.6 ± 0.003%. Mean concentration of trace metals in water samples ranged from Fe: 0.05–0.47 mg l⁻¹; Al: 0.1–1.54 mg l⁻¹; Cu: 0.14–1.39 mg l⁻¹; Zn: 0.04–0.43 mg l⁻¹; Cd: trace–0.02 mg l⁻¹; Pb: trace–0.03 mg l⁻¹, Mn: 0.01–0.18 mg l⁻¹ and Ni: 0.02–0.11 mg l⁻¹. Physical parameters of water samples examined were within the drinking water safety limits except for conductivity. Results generally indicate the presence of heavy metal constituents in groundwater samples. Detection of metals such as cadmium and lead which have serious health implications above WHO and USEPA limits in drinking water gives cause for concern.     

Risk-Based Analysis of Environmental Monitoring Data: Application to Heavy Metals in North Carolina Surface Waters

The state of North Carolina's Department of Environment and Natural Resources (NCDENR) conducts routine water quality monitoring throughout the state to assess the health of aquatic systems. The current study reports the results of a retrospective (1990–2000) ecological risk assessment of six heavy metals (arsenic, cadmium, copper, lead, mercury, and zinc) in 17 North Carolina basins that was conducted to estimate the risk of heavy metal toxicity to freshwater organisms and assess the sufficiency of NCDENR's monitoring data to identify water-quality-related ecological threats. Acute and chronic ecotoxicological thresholds (ETs) were calculated for each metal based upon the 10th percentile of species sensitivity distributions and were normalized for water hardness. Statewide probabilities (expressed as percentages) of a random sample exceeding acute or chronic ETs among the six metals ranged from 0.01% to 12.19% and 0.76% to 21.21%, respectively, with copper having the highest and arsenic and mercury the lowest risk. Basin-specific probabilities varied significantly depending upon water hardness and presumably watershed development. Although the majority of specific sites where data were collected were at low risk for metal toxicity, some specific sites had a high probability of toxic events associated with one or more metals. Analytical detection limits for metals were frequently higher than estimated chronic ET, limiting the ability to assess the risk of chronic toxicity in soft-water basins. Results suggest risk-based criteria may be useful for assessing and validating the sufficiency of monitoring programs and prioritizing management goals.     

我国南方某城市垃圾焚烧飞灰特性及固化/稳定化处置实验

我国南方某城市主要采用焚烧法处理生活垃圾,已建7个焚烧厂日产生飞灰量为101.62 t/d。文章分析了各个垃圾焚烧厂飞灰的化学组成和重金属浸出毒性,其主要成分为CaO、SiO2、MgO、Al2O3、Fe2O3、Na2O、SO3和Cl,所有焚烧飞灰都有至少一种重金属浸出浓度超标,属于危险废物。在飞灰处置出路亟待解决的背景下,实验探讨了飞灰稳定化工艺,结果表明10%的水泥添加量可以使飞灰中超标重金属(Cd、Pb和Zn)的浸出浓度满足危险废物鉴别浓度限值和安全填埋场入场浓度限值。同时,通过人体健康风险评价分析了飞灰豁免管理的可行性,并对近期和远期该城市焚烧厂飞灰的处理处置及管理提出建议。     

阿尔金山保护区地表水部分重金属背景值调查与分析

根据实地考察,采集了阿尔金山保护区主要地表水体的水质样本。受考察期限和水质样本保存要求与期限限制,只对样本中铜、锌、镉等重金属指标进行了检测,分析了各指标与《地表水环境质量标准》中不同标准限值的关系,及其在地理空间上的分布规律。本次考察分析的结果可作为后期水质考察的背景信息,是进一步开展保护区水环境调查和研究的基础。     

Assessment of Presence of Heavy Metals and Other Pollution Burden Parameters and Their Effect on Water Quality in Benin City,Edo State

An assessment of the heavy metal content and biological pollution burden of an abattoir dumpsite, an automobile carwash, the Ikpoba River, and a private water borehole located near the abattoir dumpsite was conducted in Benin City in Southern Nigeria, during the rainy and dry seasons. The water samples’ pH was lower than the permissible values, with the river water displaying color and possessing a slight odor. Iron concentrations exceeded the permissible limits for drinking water at all four of the sampling stations in the study area, although not in samples collected from the control station, station 5, a public water borehole that is located some distance away. Lead values were higher than drinking water standards in the samples collected from stations 1 through 4, with some exceptions during the rainy season. Copper, nickel, arsenic, chromium, and aluminum were detected in three out of the four sampling stations located within the study area. However, these metals were detected at levels that were within regulatory limits. The detection of three metals (iron, lead, and zinc) within the study area at levels exceeding drinking water limits suggested that a complete cycle of movement of pollutants into the sampling stations had occurred. Significant biological presences were also detected, as the Ikpoba River water had a standard plate count (SPC) of 130 most probable number (MPN) and a 22 MPN presumptive coliform count (PCC) or 22 MPN. However, Escherichia coli (E. coli) confirmatory tests recorded less than 2 MPN in both seasons. The study has shown that the quality of water in the river may be compromised by effluent discharges from the dumpsite and the carwash channel. Therefore, this situation requires more stringent enforcement of local environmental laws and maintenance of safe distances between domestic and industrial waste sources and domestic or private water wells.     

Comparison of heavy metals content in compost against vermicompost of organic solid waste: Past and present

Disposal of the municipal organic solid waste is a serious problem worldwide. Composting is one of the most preferred methods of solid waste management practice, principally due to the high percentage of organic material in the waste composition. Composting has advantages over land-filling and incineration in Mauritius because of lower operational costs, less environmental pollution, beneficial use of the end product, high humidity and organic content of household waste. Vermicomposting is a comparatively enhanced method in composting, and involves the stabilization of organic solid waste through earthworm consumption that converts the waste into earthworm castings. In both composting and vermicomposting processes, the presence of heavy metals and different toxics substances limits its land use without processing. The production and application of compost potentially contaminate the environment with heavy metals. There is a high-degree of consensus in the past and present literatures that composting increases metal concentrations but whether similar changes in metal concentration and availability occur during vermicomposting has not been fully resolved. This review deals with various total metal contents present in composting compared to that present in vermicomposting of organic solid wastes from past and present years.     

Crushed concrete as a phosphate binding material: a potential new management tool

To avoid eutrophication of receiving waters, effective methods to remove P in urban and agricultural runoff are needed. Crushed concrete may be an effective filter material to remove dissolved and particulate P. Five types of crushed concrete were tested in the laboratory to evaluate the retention capacity of dissolved P. All types removed P very effectively (5.1-19.6 g P kg(-1) concrete), while the possible release of bound P varied between 0.4 and 4.6%. The retention rate was positively related to a decreasing concrete grain size due to an increasing surface area for binding. The P retention was also related to a marked increase in pH (up to pH 12), and the highest retention was observed when pH was high. Under these circumstances, column experiments showed outlet P concentrations <0.0075 mg P L(-1). Furthermore, experiments revealed that release of heavy metals is of no importance for the treated water. We demonstrate that crushed concrete can be an effective tool to remove P in urban and agricultural runoff as filter material in sedimentation/infiltration ponds provided that pH in the treated water is neutralized or the water is diluted before outlet to avoid undesired effects caused by the high pH.     

QUALITY OF WATER AND BOTTOM SEDIMENTS IN THE TRINITY RIVER1

ABSTRACT: Data were developed to determine the quality of water and bottom sediments in the Trinity River, and the mobility of various contaminants when bottom sediments were mixed with the river water under simulated dredging conditions. Thirteen sampling sites were selected. A number of chemical tests including heavy metals and pesticides were conducted on river water, elutriates, and bottom sediments. Statis bioassays using Daphnia magna were conducted on river water and elutriates. Results indicated that the river in the upper reach is grossly polluted due to discharge of waste water effluents from several large treatment plants. High concentrations of nitrogen, phosphorus, organic carbon, COD, heavy metals, and pesticides were found in water and bottom sediments. The concentrations of most of these pollutants exceeded the EPA recommended limits. Elutriation gave no consistent results, perhaps because of release or uptake of contaminants from the sediments. High mortality of D. magna were also recorded in the upper reach of the river. The quality of water and bottom sediments gradually improved in lower reaches.     

Properties of steel foundry electric arc furnace dust solidified/stabilized with Portland cement

Electric arc furnace dust from steel production is generated in considerable amounts worldwide and needs to be treated as hazardous waste. The aim of this study was to investigate the properties of electric arc furnace dust solidified/stabilized by using Portland cement. Mortar and paste samples were prepared with varying waste-to-binder ratios between 0% and 90%. A comprehensive experimental program was designed including XRF characterization, setting time, unconfined compressive strength, and toxicity characteristics leaching procedure (TCLP), synthetic precipitation leaching procedure (SPLP), and acid neutralization capacity (ANC) tests. The results were evaluated in order to determine if the solidified /stabilized product can be disposed of at a landfill site with domestic waste or at a segregated landfill. The effect of using sand on S/S performance was also investigated. The results indicated that the solidification /stabilization process using PC helps the heavy metals to be bound in the cement matrix, but the TCLP leaching results exceeded the EPA landfilling limits. The SPLP leaching results conformed to the limits implying that the waste or S/S products can be disposed of at a segregated landfill; however the low ANC of the S/S products reveals that there may be leaching in the long-term. The sand used in the mortar samples adversely affected the S/S performance, causing higher heavy metal leaching levels, and lower pH levels in the leachate after the TCLP extraction than those measured in the leachate of the paste samples.     

The reuse of municipal solid waste incinerator fly ash slag as a cement substitute

The results of the treatment of fly ash from a municipal solid waste incinerator (MSWI) by melting are described, and the safety and the effectiveness of using the slag produced by this melting treatment are studied. The properties of the MSWI fly ash slag were analyzed, to evaluate the feasibility of its reuse as a substitute for part of the cement required in mortar preparation. This MSWI fly ash slag was found to be comprised mainly of SiO₂ and CaO, which can be substituted for up to 20% of the cement content in mortar, without sacrificing the quality of the resultant concrete. In fact, the concrete thus produced has greater compressive strength, 10% higher than that without the substitution. The setting time of the fresh mortar becomes lengthens as increasing amounts of cement are replaced; while the spread flow value increases with the increasing percentage of cement substitution. X-ray diffraction analysis reveals that when the W/C=0.38 and the curing AGE=28 days, the crystal patterns in the mortar samples, prepared with different amounts of cement having been replaced by MSWI fly ash slag are similar. According to the results of the toxic characteristic leaching procedure analysis, MSWI fly ash slag should be classified as general non-hazardous industrial waste, that meets the effluent standard. Therefore, the reuse of MSWI fly ash slag is feasible, and will not result in pollution due to the leaching of heavy metals.     

Determining contamination level of heavy metals in road dust from busy traffic areas with different characteristics

This study identified the levels and sources of heavy metal contamination in road dust from busy traffic areas in a typical industrial city in Korea. This study compared the total concentrations, as determined by aqua regia digestions and atomic absorption spectroscopy, of cadmium (Cd), copper (Cu), lead (Pb), zinc (Zn) and nickel (Ni) in the road dust from areas with different characteristics such as traffic rotaries, downtown areas, circulation roads, and asphalt and concrete highways. The contamination levels of the heavy metals in the road dust were evaluated using the contamination factor and the degree of contamination. The contamination levels of the heavy metals in the road dust were highly dependent on traffic volume and atmospheric dispersion from traffic rotaries. Industrial emissions and the frequency of brake use and vehicles coming to a complete stop were additional factors that affected the contamination levels in downtown areas. The concrete highway had higher contamination levels of the heavy metals than the asphalt highway. Vehicle speed was also a strong contributing factor to the degree of contamination of heavy metals in the road dust from the circulation roads and highways.     

Quality assessment of composts in the Greek market: the need for standards and quality assurance

An extensive data survey and study of the Greek market for composts or products marketed as such was carried out in order to acquire a comprehensive image of the local situation, in view of the proposed operation of large municipal solid waste (MSW) composting facilities and EU legislation changes. Physical and chemical parameters (moisture, organic matter, electrical conductivity, pH and heavy metals), stability indicators (self-heating potential, germination index) and biological indicators (microbial population, pathogen indicators and selected pathogens) were analyzed for the assessment of product quality. Results revealed wide variations even within the same group of products, which is particularly significant for parameters directly related to environmental protection and public health. The heavy metal content ranged from levels exceeding the fairly lenient Greek standards to below the stringent limits for A+ class compost in Austria. About 25% of the composts examined met the heavy metal limits for the EU eco-label award. Salmonella spp. was not detected in any of the composts but Staphylococcus aureus and Clostridium perfringens were found in 17 and 96% of the composts respectively. Pathogen indicator microorganisms were present at levels above suggested limits in all the composts. The high variability of such important parameters in composts available on the Greek market suggests an urgent need for establishing quality assurance procedures and mechanisms in the country. Moreover, the wide range of limit values within EU member states suggests the need for developing EU compost quality standards, in order to harmonize the compost markets.     

The composition and environmental hazard of copper slags in the context of the Basel Convention

A recent comprehensive review of the characteristics and utilization of copper slags encourages (properly) several applications for this important pyrometallurgical byproduct. However, the review does not include possible environmental effects from these slags. The United Nations Basel Convention on the Transboundary Movement of Hazardous Wastes and Their Disposal characterizes copper compounds that exhibit specified hazard characteristics as hazardous wastes. In 1996, the Convention considered further characterization of these and other compounds and substances. The final characterization of copper slags is as non-hazardous, i.e., exempt from control. This decision was based in part (if not largely) on the data that are presented here. Literature reports were used to accumulate data describing the chemical composition and acid leaching of commercial copper slags from three countries. From these data, average values of chemical composition and their statistical confidence limits (95%) were calculated. The variability of the chemical analyses of three commercial slags produced over 19 or 20 months were statistically analyzed and shown to be small. The concentrations of toxic heavy metals in the slags are low and the frequency distributions of the values are narrow. Most of the data are normally distributed, validating the use of the statistics used and permitting predictions of likely values. The amounts of heavy metals extracted by an aggressive standard acid leach procedure are low and well below the United States. regulatory levels derived from drinking water standards. The results for total composition and leaching illustrate why the U.S. Environmental Protection Agency made a regulatory determination that such slags are not hazardous wastes. Later, in 1996, the Basel Convention Technical Working Group concurred and the Parties to the Convention adopted their recommendation.     

含油污水中固体废物固化与燃煤混烧的可行性

在含油污水处理过程中易产生含油污泥、活性污泥及浮渣等固体废物,利用传统的焚烧法、分离法、填埋法、生物降解法处理这些废物具有一定的缺陷和局限性。为了利用这些废物中的油及有机质的潜在能量,大庆炼化公司对固体废物进行了脱水固化试验。结果表明,脱水后的废物可以达到较好的固化状态,并具有一定的热值。固化废物经粉碎处理后,可按一定比例与燃煤混烧。在正常生产状况下,热电厂可保证混合燃烧的效果,其总体热值不会降低。混烧后的灰渣和炉渣可作为水泥厂的原料。该方法有利于环境保护,但其工业化生产可行性有待于进一步证实。     

水库型与河流型水源地保护区土壤重金属污染评价与研究——以广安市为例

为摸清广安市城市集中式饮用水水源地一、二级保护区周边土壤环境状况,采用单项污染指数评价法和内梅罗综合污染指数法,对广安市河流型、水库型两种典型饮用水水源地保护区土壤污染状况进行评估,并简要分析周边环境敏感点。结果表明:水库型水源地29个、河流型水源地44个土壤检测样品均未检出镉,铜、锌、铅、镍、总铬、汞、砷均检出,变异系数分别在16.6%~62.1%和15.3%~56.6%之间,说明水源地周边土壤环境受到外界的干扰显著;水库型、河流型水源地土壤中铜、锌、铅、镍、总铬、汞、砷污染指数均小于1,表明两处水源地均未受到已检重金属污染;水库型、河流型水源地内梅罗综合污染指数范围分别为0.16~0.68、0.14~0.44,全部点位内梅罗综合污指数评价等级均为Ⅰ级,表明这两处的饮用水水源地周边土壤是清洁安全的。     

A waste management planning based on substance flow analysis

The paper describes the results of a municipal solid waste management planning based on an extensive utilization of material and substance flow analysis, combined with the results of specific life cycle assessment studies. The mass flow rates of wastes and their main chemical elements were quantified with a view to providing scientific support to the decision-making process and to ensure that the technical inputs to this process are transparent and rigorous. The role of each waste management option (recycling chains, biological and thermal treatments), as well as that of different levels of household source separation and collection (SSC), was quantitatively determined. The plant requirements were consequently evaluated, by assessing the benefits afforded by the application of high quality SSC, biological treatment of the wet organic fraction, and thermal treatment of unsorted residual waste. Landfill volumes and greenhouse gas emissions are minimized, toxic organic materials are mineralized, heavy metals are concentrated in a small fraction of the total former solid waste volume, and the accumulation of atmophilic metals in the air pollution control residues allows new recycling schemes to be designed for metals. The results also highlight that the sustainability of very high levels of SSC is reduced by the large quantities of sorting and recycling residues, amounts of toxic substances in the recycled products, as well as logistic and economic difficulties of obtaining very high interception levels. The combination of material and substance flow analysis with an environmental assessment method such as life cycle assessment appears an attractive tool-box for comparing alternative waste management technologies and scenarios, and then to support waste management decisions on both strategic and operating levels.     

利用土聚技术固化处理重金属的研究进展

土聚物是一种新型的无机聚合物，它具有类沸石似的网络结构，其分子链由Si、0、Al等以共价键连接而成。由于它的渗滤性低，对重金属元素不仅予以物理束缚也能进行化学束缚，因此利用它来固化重金属污染物的效果很好。同时，土聚物的强度又比由硅酸盐水泥制成的混凝土要高许多，因此其固化物还可被应用于道路或其他建设领域。但遗憾的是目前利用含重金属污泥制成土聚水泥的研究还基本属于空白阶段，建议加强这方面的研究。     

湿法预处理对垃圾焚烧飞灰中重金属的形态及风险影响研究

以某典型城市生活垃圾焚烧飞灰为研究对象,采用X射线荧光光谱仪（XRF）、X射线衍射仪（XRD）和电感耦合等离子体光谱仪（ICP）测定了焚烧飞灰的主要成分、矿物学组成和重金属含量,探讨了湿法预处理工艺对飞灰的化学组成、矿物学形态、化学形态及风险水平的影响.结果表明,飞灰的主要化学组成为O、Ca、Cl、Na、K等,占飞灰总质量的93.54％,其次含有0.04％ ～0.68％的Zn、Pb、Cu、Cr等微量重金属元素;经过湿法预处理,飞灰中可溶性氯盐具有较好的去除效果,且几乎所有重金属元素的不稳定形态（弱酸提取态和可还原态）比例都有一定程度的减少,有效降低了重金属的毒性、生物有效性及环境风险水平.本研究有助于降低焚烧飞灰的环境风险和探寻其资源化的有效途径.