UNCERTAINTY ANALYSIS OF BMP EFFECTWENESS FOR CONTROLLING NITROGEN FROM URBAN NONPOINT SOURCES1

ABSTRACT: The effectiveness of urban Best Management Practices (BMPs) in achieving the No-Net-Increase Policy (NNTP), a policy designed to limit nonpoint nitrogen loading to Long Island Sound (US), is analyzed. A unit loading model is used to simulate annual nitrogen exported from the Norwalk River watershed (Connecticut) under current and future conditions. A probabilistic uncertainty analysis is used to incorporate uncertainty in nitrogen export coefficients and BMP nitrogen removal effectiveness. The inclusion of uncertainty in BMP effectiveness and nitrogen export coefficients implies that additional BMPs, or BMPs with a greater effectiveness in nitrogen removal, will be required to achieve the NNIP. Even though including uncertainty leads to an increase in BMP implementation rates or BMP effectiveness, this type of analysis provides the decision maker with a more realistic assessment of the likelihood that implementing BMPs as a management strategy will be successful. Monte Carlo simulation results indicate that applying BMPs to new urban developments alone will not be sufficient to achieve the NNIP since BMPs are not 100 percent effective in removing the increase in nitrogen caused by urbanization. BMPs must also be applied to selected existing urban areas. BMPs with a nitrogen removal effectiveness of 40–60 percent, probably the highest level of removal that can be expected over an entire watershed, must be applied to at least 75 percent of the existing urban area to achieve the NNIP This high rate of application is not likely to be achieved in urbanized watersheds in the LIS watershed; therefore, additional point source control will be necessary to achieve the NNIP     

Modeling Watershed‐Scale Impacts of Stormwater Management with Traditional versus Low Impact Development Design

Stormwater runoff and associated pollutants from urban areas in the greater Chesapeake Bay Watershed (CBW) impair local streams and downstream ecosystems, despite urbanized land comprising only 7% of the CBW area. More recently, stormwater best management practices (BMPs) have been implemented in a low impact development (LID) manner to treat stormwater runoff closer to its source. This approach included the development of a novel BMP model to compare traditional and LID design, pioneering the use of comprehensively digitized storm sewer infrastructure and BMP design connectivity with spatial patterns in a geographic information system at the watershed scale. The goal was to compare total watershed pollutant removal efficiency in two study watersheds with differing spatial patterns of BMP design (traditional and LID), by quantifying the improved water quality benefit of LID BMP design. An estimate of uncertainty was included in the modeling framework by using ranges for BMP pollutant removal efficiencies that were based on the literature. Our model, using Monte Carlo analysis, predicted that the LID watershed removed approximately 78 kg more nitrogen, 3 kg more phosphorus, and 1,592 kg more sediment per square kilometer as compared with the traditional watershed on an annual basis. Our research provides planners a valuable model to prioritize watersheds for BMP design based on model results or in optimizing BMP selection.     

WATERSHED OPTIMIZATION OF AGRICULTURAL BEST MANAGEMENT PRACTICES: CONTINUOUS SIMULATION VERSUS DESIGN STORMS1

ABSTRACT: Nonpoint source (NPS) models and expert opinions are often used to prescribe best management practices (BMPs) for controlling NPS pollution. An optimization algorithm (e.g., a genetic algorithm, or GA) linked with a NPS model (e.g., Annualized AGricultural Nonpoint Source pollution model, or AnnAGNPS), can be used to more objectively prescribe BMPs and to optimize NPS pollution control measures by maximizing pollutant reduction and net monetary return from a watershed. Pollutant loads from design storms and annual loads from a continuous simulation can both be used for optimizing BMP schemes. However, which strategy results in a better solution (in terms of providing water quality protection) for a watershed is not clear. The specific objective of the study was to determine the differences in watershed pollutant loads, in an experimental watershed in Pennsylvania, resulting from optimization analyses performed using pollutant loads from a series of five 2‐yr 24‐hr storm events, a series of five 5‐yr 24‐hr storm events, and cumulative pollutant loads from a continuous simulation of five years of weather data. For each of these three different event alternatives, 100 near optimal solutions (BMP schemes) were generated. Sediment (Sed), sediment nitrogen (SedN), dissolved N (SolN), sediment organic carbon (SedOC), and sediment phosphorus (SedP) loads from a different five‐year period (an evaluation period) suggest that the optimal BMP schemes resulting from the use of annual cumulative pollutant loads from a continuous simulation of five years of weather data provide smaller cumulative NPS pollutant loads at the watershed outlet.     

Agricultural BMP Effectiveness and Dominant Hydrological Flow Paths: Concepts and a Review

We present a conceptual framework that relates agricultural best management practice (BMP) effectiveness with dominant hydrological flow paths to improve nonpoint source (NPS) pollution management. We use the framework to analyze plot, field and watershed scale published studies on BMP effectiveness to develop transferable recommendations for BMP selection and placement at the watershed scale. The framework is based on the location of the restrictive layer in the soil profile and distinguishes three hydrologic land types. Hydrologic land type A has the restrictive layer at the surface and BMPs that increase infiltration are effective. In land type B1, the surface soil has an infiltration rate greater than the prevailing precipitation intensity, but there is a shallow restrictive layer causing lateral flow and saturation excess overland flow. Few structural practices are effective for these land types, but pollutant source management plans can significantly reduce pollutant loading. Hydrologic land type B2 has deep, well‐draining soils without restrictive layers that transport pollutants to groundwater via percolation. Practices that increased pollutant residence time in the mixing layer or increased plant water uptake were found as the most effective BMPs in B2 land types. Matching BMPs to the appropriate land type allows for better targeting of hydrologically sensitive areas within a watershed, and potentially more significant reductions of NPS pollutant loading.     

Application of a Multi-Objective Optimization Method to Provide Least Cost Alternatives for NPS Pollution Control

Nonpoint source (NPS) pollutants such as phosphorus, nitrogen, sediment, and pesticides are the foremost sources of water contamination in many of the water bodies in the Midwestern agricultural watersheds. This problem is expected to increase in the future with the increasing demand to provide corn as grain or stover for biofuel production. Best management practices (BMPs) have been proven to effectively reduce the NPS pollutant loads from agricultural areas. However, in a watershed with multiple farms and multiple BMPs feasible for implementation, it becomes a daunting task to choose a right combination of BMPs that provide maximum pollution reduction for least implementation costs. Multi-objective algorithms capable of searching from a large number of solutions are required to meet the given watershed management objectives. Genetic algorithms have been the most popular optimization algorithms for the BMP selection and placement. However, previous BMP optimization models did not study pesticide which is very commonly used in corn areas. Also, with corn stover being projected as a viable alternative for biofuel production there might be unintended consequences of the reduced residue in the corn fields on water quality. Therefore, there is a need to study the impact of different levels of residue management in combination with other BMPs at a watershed scale. In this research the following BMPs were selected for placement in the watershed: (a) residue management, (b) filter strips, (c) parallel terraces, (d) contour farming, and (e) tillage. We present a novel method of combing different NPS pollutants into a single objective function, which, along with the net costs, were used as the two objective functions during optimization. In this study we used BMP tool, a database that contains the pollution reduction and cost information of different BMPs under consideration which provides pollutant loads during optimization. The BMP optimization was performed using a NSGA-II based search method. The model was tested for the selection and placement of BMPs in Wildcat Creek Watershed, a corn dominated watershed located in northcentral Indiana, to reduce nitrogen, phosphorus, sediment, and pesticide losses from the watershed. The Pareto optimal fronts (plotted as spider plots) generated between the optimized objective functions can be used to make management decisions to achieve desired water quality goals with minimum BMP implementation and maintenance cost for the watershed. Also these solutions were geographically mapped to show the locations where various BMPs should be implemented. The solutions with larger pollution reduction consisted of buffer filter strips that lead to larger pollution reduction with greater costs compared to other alternatives.     

Reducing surface water pollution through the assessment of the cost-effectiveness of BMPs at different spatial scales

Two kinds of agricultural Best Management Practices (BMPs) were examined with respect to cost-effectiveness (CE) in reducing sediment, nitrates-nitrogen (NO₃–N) and total phosphorus (TP) losses to surface waters of the Arachtos catchment in Western Greece. The establishment of filter strips at the edge of fields and a non-structural measure, namely fertilization reduction in alfalfa, combined with contour farming and zero-tillage in corn and reduction of animal numbers in pastureland, were evaluated. The Soil and Water Assessment Tool (SWAT) model was used as the non-point-source (NPS) estimator, while a simple economic component was developed estimating BMP implementation cost as the mean annual expenses needed to undertake and operate the practice for a 5-year period. After each BMP implementation, the ratio of their CE in reducing pollution was calculated for each Hydrologic Response Unit (HRU) separately, for each agricultural land use type entirely and for the whole catchment. The results at the HRU scale are presented comprehensively on a map, demonstrating the spatial differentiation of CE ratios across the catchment that enhances the identification of locations where each BMP is most advisable for implementation. Based on the analysis, a catchment management solution of affordable total cost would include the expensive measure of filter strips in corn and only in a small number of pastureland fields, in combination with the profitable measure of reducing fertilization to alfalfa fields. When examined for its impact on river loads at the outlet, the latter measure led to a 20 tn or 8% annual decrease of TP from the baseline with savings of 15€/kg of pollutant reduction. Filter strips in corn fields reduced annual sediments by 66 Ktn or 5%, NO₃–N by 71 tn or 9.5% and TP by 27 tn or 10%, with an additional cost of 3.1 €/tn, 3.3 €/kg and 8.1 €/kg of each pollutant respectively. The study concludes that considerable reductions of several pollutant types at the same time can be achieved, even at low total cost, by combining targeted BMP implementation strategies only in small parts of the catchment, also enabling policy makers to take local socio-economic constraints into consideration. The methodology and the results presented aim to facilitate decision making for a cost-effective management of diffuse pollution by enabling modelers and researchers to make rapid and reliable BMP cost estimations and thus being able to calculate their CE at the local level in order to identify the most suitable areas for their implementation.     

Assessing BMP Effectiveness and Guiding BMP Planning Using Process‐Based Modeling

There is an increasing need for improved process‐based planning tools to assist watershed managers in the selection and placement of effective best management practices (BMPs). In this article, we present an approach, based on the Water Erosion Prediction Project model and a pesticide transport model, to identify dominant hydrologic flow paths and critical source areas for a variety of pollutant types. We use this approach to compare the relative impacts of BMPs on hydrology, erosion, sediment, and pollutant delivery within different landscapes. Specifically, we focus on using this approach to understand what factors promoted and/or hindered BMP effectiveness at three Conservation Effects Assessment Project watersheds: Paradise Creek Watershed in Idaho, Walnut Creek Watershed in Iowa, and Goodwater Creek Experimental Watershed in Missouri. These watersheds were first broken down into unique land types based on soil and topographic characteristics. We used the model to assess BMP effectiveness in each of these land types. This simple process‐based modeling approach provided valuable insights that are not generally available to planners when selecting and locating BMPs and helped explain fundamental reasons why long‐term improvement in water quality of these three watersheds has yet to be completely realized.     

Nitrogen Removal by Stormwater Management Structures: A Data Synthesis

A comprehensive synthesis of data from empirically based published studies and a widely used stormwater best management practice (BMP) database were used to assess the variability in nitrogen (N) removal performance of urban stormwater ponds, wetlands, and swales and to identify factors that may explain this variability. While the data suggest that BMPs were generally effective on average, removal efficiencies of ammonium (NH₄), nitrate (NO₃), and total nitrogen (TN) were highly variable ranging from negative (i.e., BMPs acting as sources of N) to 100%. For example, removal of NO₃ varied from (median ±1 SD) ?15 ± 49% for dry ponds, 32 ± 120% for wet ponds, 58 ± 210% for wetlands, and 37 ± 29% for swales. Across the same BMP types, TN removal was 27 ± 24%, 40 ± 31%, 61 ± 30%, and 50 ± 29%. NH₄ removal was 9 ± 36%, 29 ± 72%, 31 ± 24%, and 45 ± 34%. BMP size, age, and location explained some of the variability. For example, small and shallow ponds and wetlands were more effective than larger, deeper ones in removing N. Despite well‐known intra‐annual variation in N fluxes, most measurements have been made over short time periods using concentrations, not flow‐weighted N fluxes. Urban N export is increasing in some areas as large storms become more frequent. Thus, accounting for the full range of BMP performance under such conditions is crucial. A select number of long‐term flux‐based BMP studies that rigorously measure rainfall, hydrology, and site conditions could improve BMP implementation.     

Flood Risk Reduction from Agricultural Best Management Practices

Best management practices (BMPs) play an important role in improving impaired water quality from conventional row crop agriculture. In addition to reducing nutrient and sediment loads, BMPs such as fertilizer management, reduced tillage, and cover crops could alter the hydrology of agricultural systems and reduce surface water runoff. While attention is devoted to the water quality benefits of BMPs, the potential co‐benefits of flood loss reduction are often overlooked. This study quantifies the effects of selected commonly applied BMPs on expected flood loss to agricultural and urban areas in four Iowa watersheds. The analysis combines a watershed hydrologic model, hydraulic model outputs, and a loss estimation model to determine relationships between hydrologic changes from BMP implementations and annual economic flood loss. The results indicate a modest reduction in peak discharge and economic loss, although loss reduction is substantial when urban centers or other high‐value assets are located downstream in the watershed. Among the BMPs, wetlands, and cover crops reduce losses the most. The research demonstrates that watershed‐scale implementation of agricultural BMPs could provide benefits of flood loss reduction in addition to water quality improvements.     

A WATER QUALITY‐BASED APPROACH FOR WATERSHED WIDE BMP STRATEGIES1

ABSTRACT: Watershed management strategies generally involve controlling nonpoint source pollution by implementing various best management practices (BMPs). Currently, stormwater management programs in most states use a performance‐based approach to implement onsite BMPs. This approach fails to link the onsite BMP performance directly to receiving water quality benefits, and it does not take into account the combined treatment effects of all the stormwater management practices within a watershed. To address these issues, this paper proposes a water quality‐based BMP planning approach for effective nonpoint source pollution control at a watershed scale. A coupled modeling system consisting of a watershed model (HSPF) and a receiving water quality model (CE‐QUAL‐W2) was developed to establish the linkage between BMP performance and receiving water quality targets. A Monte Carlo simulation approach was utilized to develop alternative BMP strategies at a watershed level. The developed methodology was applied to the Swift Creek Reservoir watershed in Virginia, and the results show that the proposed approach allows for the development of BMP strategies that lead to full compliance with water quality requirements.     

Optimal nonpoint source pollution control strategies for a reservoir watershed in Taiwan

The purpose of this study is to develop a model for optimal nonpoint source pollution control for the Fei-Tsui Reservoir watershed in Northern Taiwan. Several structural best management practices (BMPs) are selected to treat stormwater runoff. The complete model consists of two interacting components: an optimization model based on discrete differential dynamic programming (DDDP) and a zero-dimensional reservoir water quality model. A predefined procedure is used to locate suitable sites for construction of various selected BMPs in the watershed. In the optimization model, the objective function is to find the best combination of BMP type and placement, which minimizes the total construction and operation, maintenance, and repair (OMR) costs of the BMPs. The constraints are the water quality standards for total phosphorus (TP) and total suspended solids (TSS) concentrations in the reservoir. A zero-dimensional reservoir water quality model of the Vollenweider type is embedded in the optimization framework to simulate pollutant concentrations in Fei-Tsui Reservoir. The resulting optimal cost and benefit of water quality improvement are depicted by the model-derived trade-off curves. The modeling framework developed in the present study could be used as an efficient tool for planning a watershed-wide implementation of BMPs for mitigating stormwater pollution impact on the receiving water bodies.     

MODELING COST-EFFECTIVENESS OF AGRICULTURAL NONPOINT POLLUTION ABATEMENT PROGRAMS ON TWO FLORIDA BASINS1

ABSTRACT: A model was developed to evaluate the cost-effectiveness of alternative “best management practice” (BMP) implementation schemes on two agricultural basins in Florida. The model selectively applies BMPs throughout the basin on a field by field basis, estimates the associated costs, and predicts the relative water quality improvement (reductions in nitrogen and phosphorus). The water quality model links field scale simulation (for detailed BMP evaluation) with basin delivery and attenuation functions to predict the basin-wide effects of any combination of BMPs. Fifteen BMP scenarios were evaluated to aid in prioritizing BMPs for implementation in these basins. Applying the maximum level of BMPs is estimated to cost around $1.2 million (annually), while the four most cost-effective BMPs would cost only one quarter as much, yet are projected to provide approximately 90 percent of the water quality improvement.     

A LONG‐TERM,WATERSHED‐SCALE,EVALUATION OF THE IMPACTS OF ANIMAL WASTE BMPs ON INDICATOR BACTERIA CONCENTRATIONS1

ABSTRACT: Driven by increasing concerns about bacterial pollution from agricultural sources, states such as Virginia have initiated cost sharing programs that encourage the use of animal waste best management practices (BMPs) to control this pollution. Although a few studies have shown that waste management BMPs are effective at the field scale, their effectiveness at the watershed scale and over the long term is unknown. The focus of this research was to evaluate the effectiveness of BMPs in reducing bacterial pollution at the watershed scale and over the long term. To accomplish this goal, a 1,163 ha watershed located in the Piedmont region of Virginia was monitored over a ten‐year period. Fecal coliforms (FC) and fecal streptococci (FS) were measured as indicators of bacterial pollution. A pre‐BMP versus post‐BMP design was adopted. Major BMPs implemented were manure storage facilities, stream fencing, water troughs, and nutrient management. Seasonal Kendall trend analysis revealed a significant decreasing trend during the post‐BMP period for FC concentrations at the watershed outlet, but not at the subwatershed level. Implementation of BMPs also resulted in a significant reduction in the geometric mean of FS concentrations. FC concentrations in streamflow at the watershed outlet exceeded the Virginia primary standard 86 and 74 percent of the time during pre‐BMP and post‐BMP periods, respectively. Corresponding exceedances for the secondary standard were 50 and 41 percent. Violations decreased only slightly during the post‐BMP period. The findings of this study suggest that although BMP implementation can be expected to accomplish some improvement in water quality, BMP implementation alone may not ensure compliance with current water quality standards.     

LIVESTOCK GRAZING MANAGEMENT IMPACTS ON STREAM WATER QUALITY: A REVIEW1

ABSTRACT: Controlling agricultural nonpoint source pollution from livestock grazing is a necessary step to improving the water quality of the nation's streams. The goal of enhanced stream water quality will most likely result from the implementation of an integrated system of best management practices (BMPs) linked with stream hydraulic and geomorphic characteristics. However, a grazing BMP system is often developed with the concept that BMPs will function independently from interactions among controls, climatic regions, and the multifaceted functions exhibited by streams. This paper examines the peer reviewed literature pertaining to grazing BMPs commonly implemented in the southern humid region of the United States to ascertain effects of BMPs on stream water quality. Results indicate that the most extensive BMP research efforts occurred in the western and midwestern U.S. While numerous studies documented the negative impacts of grazing on stream health, few actually examined the success of BMPs for mitigating these effects. Even fewer studies provided the necessary information to enable the reader to determine the efficacy of a comprehensive systems approach integrating multiple BMPs with pre‐BMP and post‐BMP geomorphic conditions. Perhaps grazing BMP research should begin incorporating geomorphic information about the streams with the goal of achieving sustainable stream water quality.     

REEXAMINING BEST MANAGEMENT PRACTICES FOR IMPROVING WATER QUALITY IN URBAN WATERSHEDS1

ABSTRACT: Municipalities will be implementing structural best management practices at increasing rates in their effort to comply with Phase II of the National Pollutant Discharge Elimination System (NPDES). However, there is evidence that structural best management practices (BMPs) by themselves may be insufficient to attain desired water quality standards. This paper reports on an analysis of the median removal efficiencies of structural BMPs and compares them to removal efficiencies estimated as being necessary to attain water quality standards in the Rouge River in Detroit, Michigan. Eight water quality parameters are reviewed using data collected from 1994 to 1999 in the Rouge River. Currently, five of the eight parameters in the Rouge River including bacteria, biochemical oxygen demand, and total suspended solids (TSS) exceed the required water quality standards. The reported analysis of structural BMP efficiencies reveals that structural BMPs appear capable of reducing only some of the pollutants of concern to acceptable levels.     

CONSIDERATIONS IN CHOOSING THE APPROPRIATE MIX OF URBAN AND AGRICULTURAL NONPOINT POLLUTION CONTROL1

ABSTRACT: In developing strategies for nonpoint pollution control in designated 208 areas, one of the issues facing planners is the relative emphasis which should be placed upon urban versus agricultural non-point control. Five criteria which should be considered in designing an appropriate BMP strategy mix are discussed: 1) BMP cost effectiveness; 2) information and administrative cost; 3) flexibility, which relates to the cost of reversibility given substantial uncertainties; 4) associated effects, both direct and indirect; and 5) acceptability to local jurisdictions and groups. Whatever an evaluation on the basis of the first four criteria may suggest, acceptance of agricultural BMPs will be difficult to achieve, thus favoring urban oriented strategies, unless local revenue sources are developed to offer payments to farmers for BMP adoption.     

Major factors influencing the efficacy of vegetated buffers on sediment trapping: a review and analysis

Sediment is a major agricultural pollutant threatening water quality. Vegetated buffers, including vegetative filter strips, riparian buffers, and grassed waterways, are best management practices (BMPs) installed in many areas to filter sediments from tailwaters, and deter sediment transport to water bodies. Along with reducing sediment transport, the filters also help trap sediment bound nutrients and pesticides. The objectives of this study were: (i) to review vegetated buffer efficacy on sediment trapping, and (ii) to develop statistical models to investigate the major factors influencing sediment trapping. A range of sediment trapping efficacies was found in a review of over 80 representative BMP experiments. A synthesis of the literature regarding the effects of vegetated buffers on sediment trapping is needed. The meta-analysis results based on the limited data showed that buffer width and slope are two major factors influencing BMPs efficacy of vegetated buffers on sediment trapping. Regardless of the area ratio of buffer to agricultural field, a 10 m buffer and a 9% slope optimized the sediment trapping capability of vegetated buffers.     

WATERSHED LEVEL BEST MANAGEMENT PRACTICE SELECTION AND PLACEMENT IN THE TOWN BROOK WATERSHED, NEW YORK1

Abstract: For a number of years, best management practices (BMPs) have been implemented within the Town Brook watershed as part of a watershed wide effort to reduce phosphorus losses to the New York City water supply reservoirs. Currently, there are no quantitative indications of the effectiveness of these practices at the watershed scale. Additionally, work is needed to evaluate management practice solutions for costs in relation to effectiveness. In this study we develop a methodology for evaluating management solutions to determine the best way(s) to select and place management practices so that pollutant removal targets are met at minimum cost. The study combines phosphorus losses as simulated by the Soil and Water Assessment Tool (SWAT), management practice effectiveness estimates from a predeveloped characterization tool, and practice costs in optimizations using a genetic algorithm. For a user defined target phosphorus removal (60 percent for this study), optimization favors nutrient management plans, crop rotations, contour strip cropping, and riparian forest buffers; the most cost effective scenario achieves a cost effectiveness of 24/kg phosphorus removal per year compared to the 34/kg phosphorus removal per year associated with the current basic implementation scheme. The study suggests that there is a need to evaluate potential solutions prior to implementation and offers a means of generating and evaluating the solutions.     

Comparing Costs of Onsite Best Management Practices to Nutrient Credits for Stormwater Management: A Case Study in Virginia

Best management practices (BMPs) are widely used to mitigate impacts of increased impervious surfaces on stormwater runoff. However, there is limited detailed and up‐to‐date information available on the cost of designing, constructing, and maintaining BMPs over their lifetime. The objective of this study is to analyze BMPs recently constructed by the Virginia Department of Transportation (VDOT) to quantify their total cost per pound of phosphorus removed annually. A motivating factor for the study is recent changes to regulatory guidelines in Virginia which allow for full or partial substitution of purchased nutrient credits in lieu of constructing onsite BMPs to achieve compliance with stormwater quality regulations. Results of the analysis of nine BMPs found their cost ranged from $20,100 to $74,900, in 2014 dollars, per pound ($44,313‐$165,126 per kg) of phosphorus removed. Based on these results and assuming current credit prices procured by VDOT, purchasing nutrient credits is a cost‐effective option for the agency, especially when factoring in the cost of additional right of way for the BMP. Based on this finding, we expect compliance with stormwater quality regulations through credit purchases to become more widely used in Virginia. Moving forward, we suggest more direct tracking of BMP costs to support comparisons between BMP costs across a range of types and conditions to credit purchases for meeting stormwater regulations.     

Identifying Key Factors in Homeowner’s Adoption of Water Quality Best Management Practices

The recognition of the significance of the residential environment in contributing to non-point source (NPS) pollution and the inherently dispersed nature of NPS pollution itself that presents significant challenges to effective regulation has led to the creation and dissemination of best management practices (BMPs) that can reduce the impacts of NPS pollution (Environmental Protection Agency US, Protecting water quality from urban runoff, http://www.epa.gov/npdes/pubs/nps_urban-facts_final.pdf, 2003). However, very few studies have examined the factors that influence the adoption of BMPs by residential homeowners, despite the fact that residential environments have been identified as one of the most significant contributors to NPS pollution. Given this need, the purpose of this project was to explore how demographic and knowledge-based factors predict adoption of residential BMPs in an urbanizing watershed in Northern Illinois using statistical analyses of survey data collected as part of a watershed planning process. The findings indicate that broad knowledge of BMPs is the strongest predictor of use for a specific BMP. Knowledge of BMPs is strongly correlated with their use, which reinforces the need for educational programs, even among those assumed to be knowledgeable about BMPs.