Trace element concentrations in soil, corn leaves, and grain after cessation of biosolids applications

From 1974 to 1984, 543 Mg ha(-1) of biosolids were applied to portions of a land-reclamation site in Fulton County, IL. Soil organic C increased to 5.1% then decreased significantly (p < 0.01) to 3.8% following cessation of biosolids applications (1985-1997). Metal concentrations in amended soils (1995-1997) were not significantly different (p > 0.05) (Ni and Zn) or were significantly lower (p < 0.05) (6.4% for Cd and 8.4% for Cu) than concentrations from 1985-1987. For the same biosolids-amended fields, metal concentrations in corn (Zea mays L.) either remained the same (p > 0.05, grain Cu and Zn) or decreased (p < 0.05, grain Cd and Ni, leaf Cd, Cu, Ni, Zn) for plants grown in 1995-1997 compared with plants grown immediately following termination of biosolids applications (1985-1987). Biosolids application increased (p < 0.05) Cd and Zn concentrations in grain compared with unamended fields (0.01 to 0.10 mg kg(-1) for Cd and 23 to 28 mg kg(-1) for Zn) but had no effect (p > 0.05) on grain Ni concentrations. Biosolids reduced (p < 0.05) Cu concentration in grain compared with grain from unamended fields (1.9 to 1.5 mg kg(-1)). Biosolids increased (p < 0.05) Cd, Ni, and Zn concentrations in leaves compared with unamended fields (0.3 to 5.6 mg kg(-1) for Cd, 0.2 to 0.5 mg kg(-1) for Ni, and 32 to 87 mg kg(-1) for Zn), but had no significant effect (p > 0.05) on leaf Cu concentrations. Based on results from this field study, USEPA's Part 503 risk model overpredicted transfer of these metals from biosolids-amended soil to corn.     

Accumulation of cadmium in the edible parts of six vegetable species grown in Cd-contaminated soils

Species difference in Cd accumulation is important for selection of agronomic technologies aimed at producing low-Cd vegetables. Six vegetable species (Chinese leek, pakchoi, carrot, radish, tomato and cucumber) were grown in pot and field experiments to study the accumulation of Cd under different conditions. In the field trial (Cd 2.55 mg kg(-1)), Cd concentrations in the edible parts ranged from 0.01 to 0.1 mg kg(-1) and were below the permissible limits (0.2 mg kg(-1) for pakchoi and leek; 0.1 mg kg(-1) for carrot and radish; 0.05 mg kg(-1) for cucumber and tomato), but exceeded the limit in pakchoi, Chinese leek, carrot and tomato at a Cd addition level of 2.0 mg kg(-1). Plant Cd concentrations increased linearly with the increasing concentration of Cd added to the soil, with the slope of the regression lines varying by 28-fold among the six species. The bioconcentration factor (BCF) varied substantially, and was much higher in the pot experiment than in the field trial. It is concluded that the vegetable species differed markedly in the Cd accumulation and species performed consistently under different growth conditions.     

Prediction of zinc, cadmium, lead, and copper availability to wheat in contaminated soils using chemical speciation, diffusive gradients in thin films, extraction, and isotopic dilution techniques

To predict the availability of metals to plants, it is important to understand both solution- and solid-phase processes in the soil, including the kinetics of metal release from its binding agent (ligand and/or particle). The present study examined the speciation and availability of Zn, Cd, Pb, and Cu in a range of well-equilibrated metal-contaminated soils from diverse sources using several techniques as a basis for predicting metal uptake by plants. Wheat (Triticum aestivum L.) was grown in 13 metal-contaminated soils and metal tissue concentrations (Zn, Cd, Pb, and Cu) in plant shoots were compared with total soil metal concentrations, total soluble metal, and free metal activities (pM2+) in soil pore waters, 0.01 M CaCl2-extractable metal concentrations, E values measured by isotope dilution, and effective metal concentrations, C(E), measured by diffusive gradients in thin films (DGT). In the DGT technique, ions are dynamically removed by their diffusion through a gel to a binding resin, while E values represent the isotopically exchangeable (labile) metal pools. Free metal activities (Zn2+, Cd2+, and Pb2+) in soil pore waters were determined using a Donnan dialysis technique. Plant Zn and Cd concentrations were highly related to C(E), while relationships for Zn and Cd with respect to the other measures of metals in the soils were generally lower, except for CaCl2-extractable Cd. These results suggest that the kinetically labile solid-phase pool of metal, which is included in the DGT measurement, played an important role in Zn and Cd uptake by wheat along with the labile metal in soil solution. Plant Pb concentrations were highly related to both soil pore water concentrations and C(E), indicating that supply from the solid phase may not be so important for Pb. Predictions of Cu uptake by wheat from these soils by the various measures of Cu were generally poor, except surprisingly for total Cu.     

Predicting cadmium concentrations in wheat and barley grain using soil properties

The entry of Cd into the food chain is of concern as it can cause chronic health problems. To investigate the relationship between soil properties and the concentration of Cd in wheat (Triticum aestivum L.) and harley (Hordeum vulgare L.) grain, we analyzed 162 wheat and 215 barley grain samples collected from paired soil and crop surveys in Britain, and wheat and barley samples from two long-term sewage sludge experiments. Cadmium concentrations were much lower in barley grain than in wheat grain under comparable soil conditions. Multiple regression analysis showed that soil total Cd and pH were the significant factors influencing grain Cd concentrations. Significant cultivar differences in Cd uptake were observed for both wheat and barley. Wheat grain Cd concentrations could be predicted reasonably well from soil total Cd and pH using the following model: log(grain Cd) = a + b log(soil Cd) - c(soil pH), with 53% of the variance being accounted for. The coefficients obtained from the data sets of the paired soil and crop surveys and from long-term sewage sludge experiments were similar, suggesting similar controlling factors of Cd bioavailability in sludge-amended or unamended soils. For barley, the model was less satisfactory for predicting grain Cd concentration (22% of variance accounted for). The model can be used to predict the likelihood of wheat grain Cd exceeding the new European Union (EU) foodstuff regulations on the maximum permissible concentration of Cd under different soil conditions, particularly in relation to the existing Directive and the proposed new Directive on land applications of sewage sludge.     

Multivariate analysis of trace metal levels in tannery effluents in relation to soil and water: a case study from Peshawar, Pakistan

Tannery effluents and relevant ground water and soil samples collected from various tanning industries of Peshawar were analyzed for Na, Ca, K, Mg, Fe, Mn, Cr, Co, Cd, Ni, Pb and Zn by the AAS method. The metal concentration data for the three media are reported in terms of basic statistical parameters, metal-to-metal correlations and linear regression analyses. Metal distributions in the three media were quite divergent and showed non-normal distributions with high standard deviation and skewness parameters. Sodium exhibited the highest mean levels of 1,277mg/L, 881mg/L and 12,912mg/kg in the effluent, ground water and soil samples, respectively. Among other metals, Cr concentrations were 410mg/L, 0.145mg/L, 100mg/kg and Ca, 278mg/L, 64.8mg/L, and 2,285mg/kg in the effluent, ground water and soil samples, respectively. Some significant correlations were observed between effluent and soils in terms of Na, Cr, Ni, Co and Pb. The ground water-soil interrelationship suggested that Na levels in the soil and ground water were significantly correlated with each other (r=0.486, P<0.01). Similarly, Cr in the soil is strongly correlated with Ca in ground water (r=0.486, P<0.01). These results were duly supported by the linear regression analysis of data. The source identification studies conducted using Principal Component Analysis (PCA) and Cluster Analysis (CA) evidenced that ground water and soil were being contaminated by the toxic metals emanating from the tannery effluents.     

Elevated cadmium concentrations in potato tubers due to irrigation with river water contaminated by mining in Potosí, Bolivia

Risk of cadmium (Cd) in the human food chain in Cd-contaminated areas is often limited by phytotoxicity from zinc (Zn) that is associated with the Cd contamination. A semiarid area, 60 km downstream of a tin mine in Bolivia, was surveyed where irrigation with Cd-contaminated river water (65-240 microg Cd L(-1)) has increased median soil Cd to 20 mg kg(-1) while median soil Zn was only about 260 mg kg(-1). Cadmium concentrations in potato tubers increased from background values (0.05 mg kg(-1) dry wt.) in soils irrigated with spring water to a median value of 1.2 mg kg(-1) dry wt. in the affected area. Median concentration of Cd in soil solutions was 27 microg L(-1) and exceeded the corresponding value of Zn almost twofold. Soil-extractable chloride ranged from 40 to 1600 mg Cl(-) kg(-1) and was positively correlated with soil total Cd. Increasing soil solution Cl(-) decreased the solid-liquid distribution coefficient of Cd in soil. Soil total Cd explained 64% of the variation of tuber Cd concentration while only 3% of the variation was explained by soil extractable Cl(-) (n = 49). The estimated dietary Cd intake from potato consumption by the local population is about 100 microg d(-1) which exceeds the WHO recommended total daily intake. It is concluded that the food chain risk of Cd in the irrigation water of the semiarid area is aggravated by the association with Cl(-) and, potentially, by the relatively large Cd/Zn ratio.     

Preceding crop affects grain cadmium and zinc of wheat grown in saline soils of central Iran

Enhanced Cd concentrations in wheat (Triticum aestivum L.) grain produced on saline soils of central Iran have been recently reported. Because wheat bread is a major dietary component for the Iranian people, practical approaches to decrease Cd concentration in wheat grain were investigated. This study investigated the influence of sunflower-wheat vs. cotton-wheat rotations on extractable Cd and on Cd uptake by wheat in these salt-affected soils. Two fields with different levels of Cd contamination (1.5 and 3.2 mg total Cd kg(-1) dry soil) were cropped with different rotations (cotton-wheat and sunflower-wheat) in Qom province, central Iran. Seeds of cotton (Gossypium L.) or sunflower (Helianthus annuus L. cv. Record) were planted in plots. After harvesting of the plants and removal of crop residues, wheat (cv. Rushan) was seeded in all plots. For both studied soils, the concentrations of Cd extracted by 0.04 M EDTA and 1 M CaCl(2) were significantly (P < or = 0.05) greater after cotton than after sunflower. Accordingly, the total amount of Cd in sunflower shoot was significantly (P < or = 0.05) greater than in the cotton shoot. Shoot Cd content in wheat plants grown after cotton and sunflower were significantly different; wheat shoots after cotton accumulated more Cd (two to four times) than after sunflower. Wheat grain Cd concentration after sunflower was much lower (more than seven times) than after cotton. The results of this study showed that sunflower in rotation with wheat in salt-affected soils of central Iran significantly reduced the risk of Cd transfer to wheat grain.     

Cadmium availability from granulated and bulk-blended phosphate-potassium fertilizers

Recent field experiments have shown that high chloride (Cl) in irrigation waters can increase soil cadmium (Cd) uptake by crops because of the formation of soluble ion-pair complexes of Cd with Cl in soil solution. The present study was aimed at testing a hypothesis that KCl in granulated PK fertilizers may enhance Cd uptake by crops from Cd-containing P fertilizers because of close contact between Cd and Cl in the same granules. Less effect would be expected if the same granular PK fertilizers were bulk-blended because of separation of Cd and Cl in different granules. A single superphosphate (SSP) containing 32 mg Cd kg(-1) was granulated by the compaction process with KCl at a P to K ratio = 1:1. Granular KCl was also bulk-blended with granular SSP or Cd-free monocalcium phosphate (MCP) at the same P to K ratio. An acid Ultisol (pH 5.2) was treated with PK fertilizers at 400 mg kg(-1) each for P and K. Upland rice (Oryza sativa L.) and soybean [Glycine max (L.) Merr.] were grown to maturity, and signalgrass (Brachiaria decumbens Stapf.) was cut four times during the study. The results showed that the agronomic effectiveness in increasing crop yield was the same with SSP and MCP whether granulated or bulk-blended with KCl. Concentrations of Cd in plant tissue samples of all crops were much lower for MCP than for SSP. In all the plant tissue samples, except grain samples of upland rice, Cd concentrations obtained with granulated (SSP + KCl) were significantly higher than that with bulk-blended (SSP) + (KCl).     

Effect of Cadmium on Microbial Activity and a Ryegrass Crop in Two Semiarid Soils

Soil pollution with Cd is an environmental problem common in the world, and it is necessary to establish what Cd concentrations in soil could be dangerous to its fertility from toxicity effects and the risk of transference of this element to plants and other organisms of the food chain. In this study, we assessed Cd toxicity on soil microorganisms and plants in two semiarid soils (uncultivated and cultivated). Soil ATP content, dehydrogenase activity, and plant growth were measured in the two soils spiked with concentrations ranging from 3 to 8000 mg Cd/kg soil and incubated for 3 h, 20 days, and 60 days. The Cd concentrations that produced 5%; 10%;, and 50%; inhibition of each of the two soil microbiological parameter studied (ecological dose, ED, values) were calculated using two different mathematical models. Also, the effect of Cd concentration on plant growth of ryegrass (Lolium perenne, L.) was studied in the two soils. The Cd ED values calculated for soil dehydrogenase activity and ATP content were higher in the agricultural soils than in the bare soil. For ATP inhibition, higher ED values were calculated than for dehydrogenase activity inhibition. The average yields of ryegrass were reduced from 5.03 to 3.56 g in abandoned soil and from 4.21 to 1.15 g in agricultural soil with increasing concentrations of Cd in the soil. Plant growth was totally inhibited in abandoned and agricultural soils at Cd concentrations above 2000 and 5000 mg/kg soil, respectively. There was a positive correlation between the concentration of Cd in the plants and the total or DTPA-extractable concentrations of Cd in the soil.     

Bioavailability of biosolids molybdenum to soybean grain

Legumes grown in biosolids-amended soils and then fed to ruminants can represent problematic sources of molybdenum (Mo), but few field data are available to quantify the risk. We used a set of fields amended to high cumulative biosolids Mo loads (>18 kg ha(-1)) over 27 yr to generate additional data. Soybean [Glycine max (L.) Merr.] was grown on 29 fields (pH values>6.8) amended to a wide range of soil Mo loads. Soybean grain harvested from each field was analyzed for Mo and the concentrations regressed against soil Mo loads estimated from actual soil Mo concentrations in the 0- to 15-cm depth. Slopes of such linear regressions represent uptake coefficients (UC values) used by the USEPA to assess risk of biosolids Mo to ruminants fed forage grown on biosolids-amended land. The UC value for all 29 fields was estimated as 1.66, which agrees with the few soybean grain data in the literature. The UC value, however, is well below a conservative UC value of 4, recently recommended for all fresh legume materials fed to cattle. Soybean grain can contain high concentrations of Mo (>10 mg kg(-1)) and have low (<2:1) Cu to Mo ratios, which can exacerbate molybdenosis problems in cattle. However, soybean grain normally constitutes only -10% of dairy cattle diet, and other constituents (e.g., corn grain, stover, mineral supplements) are sufficient, or can be manipulated, to control molybdenosis.     

Uncertainty and sensitivity analysis of spatial predictions of heavy metals in wheat

Heavy metals seriously threaten the health of human beings when they enter the food chain. Therefore, policymakers require precise predictions of heavy metal concentrations in agricultural crops. In this paper we quantify the uncertainty of regression predictions of Cd and Pb in wheat (Triticum aestivum L.) and the contributions to the uncertainties in these predictions associated with inputs to the regression model. For each node of the 500- x 500-m grid covering the arable soils in The Netherlands, a latin hypercube sample size of 1000 is constructed from the uncertainty distributions of the explanatory variables (pH, soil organic matter [SOM], and heavy metal concentration in soil), the regression coefficients, and the random term of the regression model. This sample is used as input for the regression model to obtain 1000 values from the uncertainty distributions of the log(Cd) and log(Pb) concentration in wheat. There were no nodes where the recent EU quality standards for Cd and Pb (0.2 mg kg(-1) fresh wt.) in wheat were almost certain to be exceeded. For most nodes with clay soils, the quality standard for Cd in wheat almost certainly will not be exceeded; for Pb this is much less certain. The uncertainty in the Cd concentration in soil contributes most to the uncertainty in the predicted Cd concentrations in wheat (36% on the average), followed by the random term of the regression model (23%). For Pb the contribution of the random term is by far the largest (52%).     

A comparison of reliability of soil cadmium determination by standard spectrometric methods

Inductively coupled plasma emission spectrometry (ICP-OES) is the most common method for determination of soil Cd, yet spectral and matrix interferences affect measurements at the available analytical wavelengths for this metal. This study evaluated the severity of the interference over a range of total soil Cd by comparing ICP-OES and inductively coupled plasma mass spectrometry (ICP-MS) measurements of Cd in acid digests. Using the emission at 226.5 nm, ICP-OES was generally unable to quantify soil Cd at low (near-background) levels and gave unreliable values compared with ICP-MS. Using the line at 228.8 nm, a marked positive bias in Cd measurement (relative to the 226.5 nm measurement) was attributable to arsenic (As) interference even at soil As concentrations below 10 mg kg. This spectral interference in ICP-OES was severe in As-contaminated orchard soils, giving a false value for soil total Cd near 2 mg kg when soil As was 100 to 150 mg kg. In attempting to avoid these ICP emission-specific interferences, this study evaluated a method to estimate total soil Cd using 1 M HNO extraction followed by determination of Cd by flame atomic absorption (FAA), either with or without preconcentration of Cd using an Aliquat-heptanone extractant. The 1 M HNO extracted an average of 82% of total soil Cd. The FAA method had no significant interferences and estimated the total Cd concentrations in all soils tested with acceptable accuracy. For Cd-contaminated soils, the Aliquat-heptanone preconcentration step was not necessary, as FAA sensitivity was adequate for quantification of extractable soil Cd and reliable estimation of total soil Cd.     

Influence of plant growth on degradation of linear alkylbenzene sulfonate in sludge-amended soil

Widespread application of sewage sludge to agricultural soils in Denmark has led to concern about the possible accumulation and effects of linear alkylbenzene sulfonate (LAS) in the soil ecosystem. Therefore, we have studied the uptake and degradation of LAS in greenhouse pot experiments. Sewage sludge was incorporated into a sandy soil to give a range from very low to very high applications (0.4 to 90 Mg dry wt. ha(-1)). In addition, LAS was added as water solutions. The soil was transferred to pots and sown with barley (Hordeum vulgare L. cv. Apex), rape (Brassica napus L. cv. Hyola 401), or carrot (Daucus carota L.). Also, plant-free controls were established. For all additions there was no plant uptake above the detection limit at 0.5 mg LAS kg(-1) d.w, but plant growth stimulated the degradation. With a growth period of 30 d, LAS concentrations in soil from pots with rape had dropped from 27 to 1.4 mg kg(-1) dry wt., but in plant-free pots the concentration decreased only to 2.4 mg kg(-1) dry wt. When LAS was added as a spike, the final concentration in soil from planted pots was 0.7 mg kg(-1) dry wt., but in pots without plants the final concentration was much higher (2.5 mg kg(-1) dry wt.). During degradation, the relative fraction of homologues C10, C11, and C12 decreased, while C13 increased.     

Soil and plant selenium at a reclaimed uranium mine

Selenium (Se) associated with reclaimed uranium (U) mine lands may result in increased food chain transfer and water contamination. To assess post-reclamation bioavailability of Se at a U mine site in southeastern Wyoming, we studied soil Se distribution, dissolution, speciation, and sorption characteristics and plant Se accumulation. Phosphate-extractable soil Se exceeded the critical limit of 0.5 mg/kg in all the samples, whereas total soil Se ranged from a low (0.6 mg/kg) to an extremely high (26 mg/kg) value. Selenite was the dominant species in phosphate and ammonium bicarbonate-diethylenetriamine pentaacetic acid (AB-DTPA) extracts, whereas selenate was the major Se species in hot water extracts. Extractable soil Se concentrations were in the order of KH2PO4 > AB-DTPA > hot water > saturated paste. The soils were undersaturated with respect to various Se solid phases, albeit with high levels of extractable Se surpassing the critical limit. Calcium and Mg minerals were the potential primary solids controlling Se dissolution, with dissolved organic carbon in the equilibrium solutions resulting in enhanced Se availability. Adsorption was a significant (r2 = 0.76-0.99 at P < 0.05) mechanism governing Se availability and was best described by the initial mass isotherm model, which predicted a maximum reserve Se pool corresponding to 87% of the phosphate-extractable Se concentrations. Grasses, forbs, and shrubs accumulated 11 to 1800 mg Se/kg dry weight. While elevated levels of bioavailable Se may be potentially toxic, the plants accumulating high Se may be used for phytoremediation, or the palatable forage species may be used as animal feed supplements in Se-deficient areas.     

Dissolution of trace element contaminants from two coastal plain soils as affected by pH

Trace element mobility in soils depends on contaminant concentration, chemical speciation, water movement, and soil matrix properties such as mineralogy, pH, and redox potential. Our objective was to characterize trace element dissolution in response to acidification of soil samples from two abandoned incinerators in the North Carolina Coastal Plain. Trace element concentrations in 11 soil samples from both sites ranged from 2 to 46 mg Cu kg(-1), 3 to 105 mg Pb kg(-1), 1 to 102 mg Zn kg(-1), 3 to 11 mg Cr kg(-1), < 0.1 to 10 mg As kg(-1), and < 0.01 to 0.9 mg Cd kg(-1). Acidified CaCl2 solutions were passed through soil columns to bring the effluent solution to approximately pH 4 during a 280-h flow period. Maximum concentrations of dissolved Cu, Pb, and Zn at the lowest pH of an experiment (pH 3.8-4.1) were 0.32 mg Cu L(-1), 0.11 mg Pb L(-1), and 1.3 mg Zn L(-1) for samples from the site with well-drained soils, and 0.25 mg Cu L(-1), 1.2 mg Pb L(-1), and 1.4 mg Zn L(-1) for samples from the site with more poorly drained soils. Dissolved Cu concentration at pH 4 increased linearly with increasing soil Cu concentration, but no such relationship was found for Zn. Dissolved concentrations of other trace elements were below our analytical detection limits. Synchrotron X-ray absorption near edge structure (XANES) spectroscopy showed that Cr and As were in their less mobile Cr(III) and As(V) oxidation states. XANES analysis of Cu and Zn on selected samples indicated an association of Cu(II) with soil organic matter and Zn(II) with Al- and Fe-oxides or franklinite.     

Effect of long-term application of biosolids for land reclamation on surface water chemistry

Biosolids are known to have a potential to restore degraded land, but the long-term impacts of this practice on the environment, including water quality, still need to be evaluated. The surface water chemistry (NO3-, NH4+, and total P, Cd, Cu, and Hg) was monitored for 31 yr from 1972 to 2002 in a 6000-ha watershed at Fulton County, Illinois, where the Metropolitan Water Reclamation District of Greater Chicago was restoring the productivity of strip-mined land using biosolids. The mean cumulative loading rates during the past 31 yr were 875 dry Mg ha(-1) for 1120-ha fields in the biosolids-amended watershed and 4.3 dry Mg ha(-1) for the 670-ha fields in the control watershed. Biosolids were injected into mine spoil fields as liquid fertilizer from 1972 to 1985, and incorporated as dewatered cake from 1980 to 1996 and air-dried solids from 1987 to 2002. The mean annual loadings of nutrients and trace elements from biosolids in 1 ha were 735 kg N, 530 kg P, 4.5 kg Cd, 30.7 kg Cu, and 0.11 kg Hg in the fields of the biosolids-amended watershed, and negligible in the fields of the control watershed. Sampling of surface water was conducted monthly in the 1970s, and three times per year in the 1980s and 1990s. The water samples were collected from 12 reservoirs and 2 creeks receiving drainage from the fields in the control watershed, and 8 reservoirs and 4 creeks associated with the fields in the biosolids-amended watershed for the analysis of NO3- -N (including NO2- N), NH4+-N, and total P, Cd, Cu, and Hg. Compared to the control (0.18 mg L(-1)), surface water NO3- -N in the biosolids-amended watershed (2.23 mg L(-1)) was consistently higher; however, it was still below the Illinois limit of 10 mg L(-1) for public and food-processing water supplies. Biosolids applications had a significant effect on mean concentrations of ammonium N (0.11 mg L(-1) for control and 0.24 mg L(-1) for biosolids) and total P (0.10 mg L(-1) for control and 0.16 mg L(-1) for biosolids) in surface water. Application of biosolids did not increase the concentrations of Cd and Hg in surface water. The elevation of Cu in surface water with biosolids application only occurred in some years of the first decade, when land-applied sludges contained high concentrations of trace metals, including Cu. In fact, following the promulgation of 40 CFR Part 503, the concentrations of all three metals fell below the method detection level (MDL) in surface water for nearly all samplings. Nitrate in the surface water tends to be higher in spring, and ammonium, total P, and total Hg in summer and fall. Mean nitrate, ammonium, and total phosphorus concentrations were found to be greater in creeks than reservoirs. The results indicate that application of biosolids for land reclamation at high loading rates from 1972 to 2002, with adequate runoff and soil erosion control, had only a minor impact on surface water quality.     

Nitrate loss in subsurface drainage as affected by nitrogen fertilizer rate

The relationships between N fertilizer rate, yield, and NO3 leaching need to be quantified to develop soil and crop management practices that are economically and environmentally sustainable. From 1996 through 1999, we measured yield and NO3 loss from a subsurface drained field in central Iowa at three N fertilizer rates: a low (L) rate of 67 kg ha(-1) in 1996 and 57 kg ha(-1) in 1998, a medium (M) rate of 135 kg ha(-1) in 1996 and 114 kg ha(-1) in 1998, and a high (H) rate of 202 kg ha(-1) in 1996 and 172 kg ha(-1) in 1998. Corn (Zea mays L.) and soybean [Glycine max (L.) Merr.] were grown in rotation with N fertilizer applied in the spring to corn only. For the L treatment, NO3 concentrations in the drainage water exceeded the 10 mg N L(-1) maximum contaminant level (MCL) established by the USEPA for drinking water only during the years that corn was grown. For the M and H treatments, NO3 concentrations exceeded the MCL in all years, regardless of crop grown. For all years, the NO3 mass loss in tile drainage water from the H treatment (48 kg N ha(-1)) was significantly greater than the mass losses from the M (35 kg N ha(-1)) and L (29 kg N ha(-1)) treatments, which were not significantly different. The economically optimum N fertilizer rate for corn was between 67 and 135 kg ha(-1) in 1996 and 114 and 172 kg ha(-1) in 1998, but the net N mass balance indicated that N was being mined from the soil at these N fertilizer levels and that the system would not be sustainable.     

RDX loss in a surface soil under saturated and well drained conditions

On military training ranges, low-order, incomplete detonations deposit RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine) into surface soils. In this study, we evaluated RDX biodegradation in surface soils obtained from a military training range in Alaska. Two factors were compared: (i) soil water potential during the incubations; and (ii) the use of acetonitrile (ACN) as an RDX carrier to spike samples. Organic solvents have been used in laboratory studies to dissolve slightly water-soluble contaminants before addition to soil. We added ACN to obtain final soil ACN concentrations of 0 mg kg(-1) (0%), 1000 mg kg(-1) (0.1%) and 10 000 mg kg(-1) (1%). We then compared RDX attenuation in the soil under saturated and unsaturated conditions. RDX fell below the limit of detection within 3 wk of study initiation under the saturated condition. A maximum degradation rate of 0.15 mg RDX L(-1) d(-1) was measured. Under the unsaturated condition, 42% of the original RDX was still present at study termination (5 wk). The addition of acetonitrile at 0.1 or 1.0% had no affect on RDX loss in the saturated soil. In the unsaturated soil, however, ACN at 1.0% inhibited RDX loss by as much as 25%. These findings indicate that soil water potential and carrier solvent concentrations can impact the rate and extent to which RDX is attenuated in a surface soil.     

Effect of chloride in soil solution on the plant availability of biosolid-borne cadmium

Increasing chloride (Cl) concentration in soil solution has been shown to increase cadmium (Cd) concentration in soil solution and Cd uptake by plants, when grown in phosphate fertilizer- or biosolid-amended soils. However, previous experiments did not distinguish between the effect of Cl on biosolid-borne Cd compared with soil-borne Cd inherited from previous fertilizer history. A factorial pot experiment was conducted with biosolid application rates of 0, 20, 40, and 80 g biosolids kg(-1) and Cl concentration in soil solution ranging from 1 to 160 mM Cl. The Cd uptake of wheat (Triticum aestivum L. cv. Halberd) was measured and major cations and anions in soil solution were determined. Cadmium speciation in soil solution was calculated using GEOCHEM-PC. The Cd concentration in plant shoots and soil solution increased with biosolid application rates up to 40 g kg(-1), but decreased slightly in the 80 g kg(-1) biosolid treatment. Across biosolid application rates, the Cd concentration in soil solution and plant shoots was positively correlated with the Cl concentration in soil solution. This suggests that biosolid-borne Cd is also mobilized by chloride ligands in soil solution. The soil solution CdCl+ activity correlated best with the Cd uptake of plants, although little of the variation in plant Cd concentrations was explained by activity of CdCl+ in higher sludge treatments. It was concluded that chlorocomplexation of Cd increased the phytoavailability of biosolid-borne Cd to a similar degree as soil (fertilizer) Cd. There was a nonlinear increase in plant uptake and solubility of Cd in biosolid-amended soils, with highest plant Cd found at the 40 g kg(-1) rate of biosolid application, and higher rates (80 g kg(-1)) producing lower plant Cd uptake and lower Cd solubility in soil. This is postulated to be a result of Cd retention by CaCO3 formed as a result of the high alkalinity induced by biosolid application.     

Cadmium accumulation and tolerance of mahogany (Swietenia macrophylla) seedlings for phytoextraction applications

Mahogany, a high biomass fast-growing tropical tree, has recently garnered considerable interest for potential use in heavy metal phytoremediation. This study performed hydroponic experiments with Cd concentration gradients at concentrations of 0, 7.5, 15, and 30 mg L(-1) to identify Cd accumulation and tolerance of mahogany (Swietenia macrophylla) seedlings as well as their potential for phytoextraction. Experimental results indicate that Cd inhibited mahogany seedling growth at the highest Cd exposure concentration (30 mg L(-1)). Nevertheless, this woody species demonstrated great potential for phytoextraction at Cd concentrations of 7.5 and 15 mg L(-1). The roots, twigs, and leaves had extremely large bioaccumulation factors at 10.3-65.1, indicating that the plant extracted large amounts of Cd from hydroponic solutions. Mahogany seedlings accumulated up to 154 mg kg(-1) Cd in twigs at a Cd concentration of 15 mg L(-1). Although Cd concentrations in leaves were <100 mg kg(-1), these concentrations markedly exceed the normal ranges for other plants. Due to the high biomass production and Cd uptake capacity of mahogany shoots, this plant is a potential candidate for remediating Cd-contaminated sites in tropical regions.