Sustainable land application: an overview

Man has land-applied societal nonhazardous wastes for centuries as a means of disposal and to improve the soil via the recycling of nutrients and the addition of organic matter. Nonhazardous wastes include a vast array of materials, including manures, biosolids, composts, wastewater effluents, food-processing wastes, industrial by-products; these are collectively referred to herein as residuals. Because of economic restraints and environmental concerns about land-filling and incineration, interest in land application continues to grow. A major lesson that has been learned, however, is that the traditional definition of land application that emphasizes applying residuals to land in a manner that protects human and animal health, safeguards soil and water resources, and maintains long-term ecosystem quality is incomplete unless the earning of public trust in the practices is included. This overview provides an introduction to a subset of papers and posters presented at the conference, "Sustainable Land Application," held in Orlando, FL, in January 2004. The USEPA, USDA, and multiple national and state organizations with interest in, and/or responsibilities for, ensuring the sustainability of the practice sponsored the conference. The overriding conference objectives were to highlight significant developments in land treatment theory and practice, and to identify future research needs to address critical gaps in the knowledge base that must be addressed to ensure sustainable land application of residuals.     

Runoff phosphorus losses from surface-applied biosolids

Runoff losses of dissolved and particulate phosphorus (P) may occur when rainfall interacts with manures and biosolids spread on the soil surface. This study compared P levels in runoff losses from soils amended with several P sources, including 10 different biosolids and dairy manure (untreated and treated with Fe or Al salts). Simulated rainfall (71 mm h(-1)) was applied until 30 min of runoff was collected from soil boxes (100 x 20 x 5 cm) to which the P sources were surfaced applied. Materials were applied to achieve a common plant available nitrogen (PAN) rate of 134 kg PAN ha(-1), resulting in total P loading rates from 122 (dairy manure) to 555 (Syracuse N-Viro biosolids) kg P ha(-1). Two biosolids produced via biological phosphorus removal (BPR) wastewater treatment resulted in the highest total dissolved phosphorus (13-21.5 mg TDP L(-1)) and total phosphorus (18-27.5 mg TP L(-1)) concentrations in runoff, followed by untreated dairy manure that had statistically (p = 0.05) higher TDP (8.5 mg L(-1)) and TP (10.9 mg L(-1)) than seven of the eight other biosolids. The TDP and TP in runoff from six biosolids did not differ significantly from unamended control (0.03 mg TDP L(-1); 0.95 mg TP L(-1)). Highest runoff TDP was associated with P sources low in Al and Fe. Amending dairy manure with Al and Fe salts at 1:1 metal-to-P molar ratio reduced runoff TP to control levels. Runoff TDP and TP were not positively correlated to TP application rate unless modified by a weighting factor reflecting the relative solubility of the P source. This suggests site assessment indices should account for the differential solubility of the applied P source to accurately predict the risk of P loss from the wide variety of biosolids materials routinely land applied.     

Influence of water treatment residuals on phosphorus solubility and leaching

Laboratory and greenhouse studies compared the ability of water treatment residuals (WTRs) to alter P solubility and leaching in Immokalee sandy soil (sandy, siliceous, hyperthermic Arenic Alaquod) amended with biosolids and triple superphosphate (TSP). Aluminum sulfate (Al-WTR) and ferric sulfate (Fe-WTR) coagulation residuals, a lime softening residual (Ca-WTR) produced during hardness removal, and pure hematite were examined. In equilibration studies, the ability to reduce soluble P followed the order Al-WTR > Ca-WTR = Fe-WTR > hematite. Differences in the P-fixing capacity of the sesquioxide-dominated materials (Al-WTR, Fe-WTR, hematite) were attributed to their varying reactive Fe- and Al-hydrous oxide contents as measured by oxalate extraction. Leachate P was monitored from greenhouse columns where bahiagrass (Paspalum notatum Flugge) was grown on Immokalee soil amended with biosolids or TSP at an equivalent rate of 224 kg P ha(-1) and WTRs at 2.5% (56 Mg ha(-1)). In the absence of WTRs, 21% of TSP and 11% of Largo cake biosolids total phosphorus (PT) leached over 4 mo. With co-applied WTRs, losses from TSP columns were reduced to 3.5% (Fe-WTR), 2.5% (Ca-WTR), and <1% (Al-WTR) of applied P. For the Largo biosolids treatments all WTRs retarded downward P flux such that leachate P was not statistically different than for control (soil only) columns. The phosphorus saturation index (PSI = [Pox]/ [Al(ox) + Fe(ox)], where Pox, Al, and Fe(ox) are oxalate-extractable P, Al, and Fe, respectively) based on a simple oxalate extraction of the WTR and biosolids is potentially useful for determining WTR application rates for controlled reduction of P in drainage when biosolids are applied to low P-sorbing soils.     

Phosphorus leaching from biosolids-amended sandy soils

Increasing emphasis on phosphorus (P)-based nutrient management underscores the need to understand P behavior in soils amended with biosolids and manures. Laboratory and greenhouse column studies characterized P forms and leachability of eight biosolids products, chicken manure (CM), and commercial fertilizer (triple superphosphate, TSP). Bahiagrass (Paspalum notatum Flugge) was grown for 4 mo on two acid, P-deficient Florida sands, representing both moderate (Candler series: hyperthermic, uncoated Typic Quartzipsamments) and very low (Immokalee series: sandy, siliceous, hyperthermic Arenic Alaquods) P-sorbing capacities. Amendments were applied at 56 and 224 kg P(T) ha(-1), simulating P-based and N-based nutrient loadings, respectively. Column leachate P was dominantly inorganic and lower for biosolids P sources than TSP. For Candler soil, only TSP at the high P rate exhibited P leaching statistically greater (alpha = 0.05) than control (soil-only) columns. For the high P rate and low P-sorbing Immokalee soil, TSP and CM leached 21 and 3.0% of applied P, respectively. Leachate P for six biosolids was <1.0% of applied P and not statistically different from controls. Largo biosolids, generated from a biological P removal process, exhibited significantly greater leachate P in both cake and pelletized forms (11 and 2.5% of applied P, respectively) than other biosolids. Biosolids P leaching was correlated to the phosphorus saturation index (PSI = [Pox]/[Al(ox) + Fe(ox)]) based on oxalate extraction of the pre-applied biosolids. For hiosolids with PSI < or = approximately 1.1, no appreciable leaching occurred. Only Largo cake (PSI = 1.4) and pellets (PSI = 1.3) exhibited P leaching losses statistically greater than controls. The biosolids PSI appears useful for identifying biosolids with potential to enrich drainage P when applied to low P-sorbing soils.     

Bioavailability of biosolids molybdenum to corn

This study was part of a larger effort to generate field data appropriate to the assessment of biosolids molybdenum (Mo) risk to ruminants. Corn (Zea mays L.) is an important component of cattle diet, and is a logical crop for biosolids amendment owing to its high N requirement. Paired soil and corn stover samples archived from two unique field experiments were analyzed to quantify the relationship (uptake coefficient, UC) between stover Mo and soil Mo load. Both studies used biosolids with total Mo concentrations typical of modern materials. Data from long-term (continuous corn) plots in Fulton County, IL confirm expected low Mo accumulation by corn stover, even at very high biosolids loads and soil Mo loads estimated to be near 18 kg Mo ha(-1). Uptake slopes were actually negative, but USEPA protocol would assign UC values of 0.001. Data from plots in Minnesota also suggested essentially no correlations between stover Mo and soil Mo loads for continuous corn. However, greater Mo accumulation in corn grown following soybean [Glycine max (L.) Merr.] suggests the possibility of enhanced Mo bioavailability to corn in corn-soybean rotations. Nevertheless, molybdenosis risk to cattle consuming corn stover produced on biosolids-amended land is small as stover Mo concentrations were always low and stover Cu to Mo ratios exceeded 2:1, which avoids molybdenosis problems.     

Bioavailability of biosolids molybdenum to soybean grain

Legumes grown in biosolids-amended soils and then fed to ruminants can represent problematic sources of molybdenum (Mo), but few field data are available to quantify the risk. We used a set of fields amended to high cumulative biosolids Mo loads (>18 kg ha(-1)) over 27 yr to generate additional data. Soybean [Glycine max (L.) Merr.] was grown on 29 fields (pH values>6.8) amended to a wide range of soil Mo loads. Soybean grain harvested from each field was analyzed for Mo and the concentrations regressed against soil Mo loads estimated from actual soil Mo concentrations in the 0- to 15-cm depth. Slopes of such linear regressions represent uptake coefficients (UC values) used by the USEPA to assess risk of biosolids Mo to ruminants fed forage grown on biosolids-amended land. The UC value for all 29 fields was estimated as 1.66, which agrees with the few soybean grain data in the literature. The UC value, however, is well below a conservative UC value of 4, recently recommended for all fresh legume materials fed to cattle. Soybean grain can contain high concentrations of Mo (>10 mg kg(-1)) and have low (<2:1) Cu to Mo ratios, which can exacerbate molybdenosis problems in cattle. However, soybean grain normally constitutes only -10% of dairy cattle diet, and other constituents (e.g., corn grain, stover, mineral supplements) are sufficient, or can be manipulated, to control molybdenosis.     

Lability of drinking water treatment residuals (WTR) immobilized phosphorus: aging and pH effects

Time constraints associated with conducting long-term (>20 yr) field experiments to test the stability of drinking water treatment residuals (WTR) sorbed phosphorus (P) inhibit improved understanding of the fate of sorbed P in soils when important soil properties (e.g., pH) change. We used artificially aged samples to evaluate aging and pH effects on lability of WTR-immobilized P. Artificial aging was achieved through incubation at elevated temperatures (46 or 70 degrees C) for 4.5 yr, and through repeated wetting and drying for 2 yr. Using a modified isotopic ((32)P) dilution technique, coupled with a stepwise acidification procedure, we monitored changes in labile P concentrations over time. This technique enabled evaluation of the effect of pH on the lability of WTR-immobilized P. Within the pH range of 4 to 7, WTR amendment, coupled with artificial aging, ultimately reduced labile P concentrations by > or = 75% relative to the control (no-WTR) samples. Soil samples with different physicochemical properties from two 7.5-yr-old, one-time WTR-amended field sites were utilized to validate the trends observed with the artificially aged samples. Despite the differences in physicochemical properties among the three (two field-aged and one artificially aged) soil samples, similar trends of aging and pH effects on lability of WTR-immobilized P were observed. Labile P concentrations of the WTR-amended field-aged samples of the two sites decreased 6 mo after WTR amendment and the reduction persisted for 7.5 yr, ultimately resulting in > or = 70% reduction, compared to the control plots. We conclude that WTR application is capable of reducing labile P concentration in P-impacted soils, doing so for a long time, and that within the commonly encountered range of pH values for agricultural soils WTR-immobilized P should be stable.     

牛栏江流域(昆明段)水质现状、存在问题及对策研究

牛栏江是金沙江的一级支流,为常流河,在昆明境内由多条河流汇集而成,通过对牛栏江流域(昆明段)水质现状分析,阐述了流域内存在的环境保护问题,提出相应的对策措施和建议.     

A laboratory exposure procedure for screening pulp and paper mill effluents for the potential of causing increased mixed function oxidase activity in fish

To better understand the relationships between pulp manufacturing processes and mixed function oxidase (MFO) enzyme induction in fish, a practical and standardized exposure procedure is required. This study was undertaken to develop a laboratory-based exposure procedure to quantify the relative MFO induction potencies of different types of pulp and paper mill effluents. One major consideration in developing the procedure was to ensure that the protocol was practical so that tests could be performed in a short time, with small volumes of effluents and using simple experimental conditions. A series of concentration-response and time-course experiments were conducted to find the minimum time and effluent concentration which could distinguish the ability of different effluents to cause significant MFO induction in rainbow trout in the laboratory. Experiments were also conducted to determine the effects of biotic and abiotic factors such as loading density, fish size and feeding regime. This study showed that the exposure of rainbow trout in the laboratory to 10% concentration of secondary-treated effluent for 96 h caused significant increases in hepatic MFO activity. The magnitude of MFO induction was comparable to other field and laboratory observations. While fish size, loading density and feeding regime were found to affect the test results, consistent responses within a laboratory using this protocol are possible, provided that these factors are standardized. Therefore, the short-term exposure approach described in this paper could be a relevant tool for assessing the ability of different types of pulp and paper mill effluents to cause MFO induction in fish.