Composting of vinasse and cotton gin waste by using two different systems

Two composts were obtained by co-composting of a concentrated depotassified beet vinasse and cotton gin waste using two different aeration systems: static aerated pile (forced aeration provided by a blower whom operated in the positive mode) and windrow (turned pile). The composting mixtures were cotton gin trash (55%) and vinasse (45%) (dry weight). In static pile, the total amount of vinasse was added at the beginning of the process whereas, in windrow two additions of vinasse were performed. Differences in temperature changes between both composting systems were found: a faster increase of temperature in the windrow (54 °C at 7 days) than in the static pile (45 °C at 21 days) was observed. Probably in the static pile system, the compaction of the substrates made difficult the correct distribution of the air inside the pile. Moreover, after the second addition of vinasse a new thermophilic phase was started in windrow. The different aeration systems and the way of addition of vinasse could cause differences in organic matter (OM) degradation and in weight (22.6% for the static pile and 26.7% for the windrow) and gas losses during the process. Nevertheless, the composts obtained by the two systems had a high fertilizer value (25.1 g kg⁻¹ N; 3.2 g kg⁻¹ P₂O₅; 21.4 g kg⁻¹ K₂O; C/N8) for compost obtained in static pile and (16.2 g kg⁻¹ N; 3.4 g kg⁻¹ P₂O₅; 16.1 g kg⁻¹ K₂O; C/N 12) for compost obtained in the windrow). A high degree of stability was reached in the final composts. Composting of vinasse with cotton gin waste serves two objectives, disposal of wastes and recycling of waste components.     

Modeling carbon and nitrogen transformations for adjustment of compost application with nitrogen uptake by wheat

Environmentally sound management of the use of composts in agriculture relies on matching the rate of release of available N from compost-amended soils to the crop demand. To develop such management it is necessary to (i) characterize the properties of composts that control their rates of decomposition and release of N and (ii) determine the optimal amount of composts that should be applied annually to wheat (Triticum aestivum L.). Carbon and N mineralization were measured under controlled conditions to determine compost decomposition rate parameters, and the NCSOIL model was used to derive the organic wastes parameters that control the rates of N and C transformations in the soil. We also characterized the effect of a drying period to estimate the effects of the dry season on C and N dynamics in the soil. The optimized compost parameters were then used to predict mineral N concentration dynamics in a soil-wheat system after successive annual applications of compost. Sewage sludge compost (SSC) and cattle manure compost (CMC) mineralization characteristics showed similar partitioning into two components of differing ease of decomposition. The labile component accounted for 16 to 20% of total C and 11 to 14% of total N, and it decomposed at a rate of 2.4 x 10(-2) d(-1), whereas the resistant pool had a decomposition rate constant of 1.2 to 1.4 x 10(-4) d(-1). The main differences between the two composts resulted from their total C and N and inorganic N contents, which were determined analytically. The long-term effect of a drying period on C and N mineralization was negligible. Use of these optimization results in a simulation of compost mineralization under a wheat crop, with a modified plant-effect version of the NCSOIL model, enabled us to evaluate the effects of the following factors on the C and N dynamics in soil: (i) soil temperature, (ii) mineral N uptake by plants, and (iii) release of very labile organic C in root exudates. This labile organic C enhanced N immobilization following application, and so decreased the N available for uptake by plants.     

Assessment of properties of Tunisian agricultural waste composts: Application as components in reconstituted anthropic soils and their effects on tomato yield and quality

Organic soil improvers are mainly used for their potential for preventing soil losses. This study investigates the physicochemical properties of six different organic soil improvers and their effects on the properties and productivity of reconstituted anthropic soils during short-term application compared to farm manure. Treatment materials were obtained from Tunisian agricultural waste composts (almond shell (AS), sesame bark (SB), olive cake (OC), olive mill wastewater sludge (OMWS) and poultry manure (PM)) as well as mixtures of compost-manure (CM). The characterization of soil conditioners shows that (i) nitrogen contents are higher in olive wastes and PM-based composts; (ii) carbon/nitrogen ratio (C/N) and the organic matter (OM) contents are in the ranges of 14.1-29.7 and 19.3-64.5%, respectively; (iii) the electrical conductivity (EC) is higher in manure (M) and compost-manure mixture (4.8-10.4 mS/cm) and (iv) pH values are alkaline (8.2-8.8). Treatments were applied as components of a reconstituted soil at a rate of 14 kg/m². Except for the manures, the mixtures of soil and treatment material (in a ratio of 600 L/28 kg) were placed in metallic basins to form the reconstituted anthropic soil. Plot areas of 2 m² were used for each treatment and 2 × 2 m² for the control. An assessment of the geochemical properties of soils during the cultivation period reveals variations in soil organic matter (SOM) contents as well as pH and EC values. Soil productivity is determined by quantitative and qualitative comparison of tomato fruits obtained from each plot amended with manure-treated soil.     

Nitrogen, phosphorus, and potassium uptake by wheat and their distribution in soil following successive, annual compost applications

The overall objective of the present study was to determine the loading limits of composts that should be applied annually to irrigated wheat. We conducted a container experiment in a greenhouse during four years. It included eight treatments: sewage sludge compost (SSC) and cattle manure compost (CMC), each applied annually to a sandy soil, at rates equivalent to 3, 6, and 12 kg m(-2), and two controls, one fertilized and one unfertilized. Total dry matter (DM), grain production, and the amount of N, P, and K taken up by plants increased with increasing compost rate. Nitrogen uptake by the plants of the fertilized control was much higher than by the plants of the highest compost rate. Phosphorus and K uptake by the plants amended with the highest compost rate was much higher than by the fertilized control plants. Inorganic N quantity in the soil increased with increasing compost rate and with successive applications. The net N mineralization during the first year of wheat growth was very low, less than 3.5% of the applied organic N under all compost application rates. The contribution of the organic N mineralization increased during the second and third years. Most of the N increase in the compost treatment was found in the upper layer of 0 to 15 cm, whereas in the fertilized treatment N accumulated from the surface to the bottom of the container, 0 to 55 cm. The successive application of high rates of composts resulted in P and K accumulation in the soil profile.     

Production of lightweight aggregates from mining and industrial wastes

Washing aggregate sludge from a gravel pit, sewage sludge from a wastewater treatment plant (WWTP) and a clay-rich sediment have been physically, chemically and mineralogically characterized. They were mixed, milled and formed into pellets, pre-heated for 5 min and sintered in a rotary kiln at 1150 °C, 1175 °C, 1200 °C and 1225 °C for 10 and 15 min at each temperature. The effects of the raw material characteristics, heating temperatures and dwell times on the loss on ignition (LOI), bloating index (BI), bulk density (ρ_b), apparent and dry particle densities (ρ_a, ρ_d), voids (H), water absorption (WA_24h) and compressive strength (S) were determined. All the mixtures presented a bloating potential taking into consideration the gases released at high temperatures. The products obtained were lightweight aggregates (LWAs) in accordance with Standard UNE-EN-13055-1 (ρ_b ≤ 1.20 g/cm³ or particle density ≤ 2.00 g/cm³). LWAs manufactured with 50% washing aggregate sludge and 50% clay-rich sediment were expanded LWAs (BI > 0) and showed the lowest apparent particle density, the lowest water absorption and the highest compressive strength. It was possible to establish three groups of LWAs on the basis of their properties in comparison to Arlita G3, F3 and F5, commercially available lightweight aggregates manufactured in Spain. Our LWAs may have the same or similar applications as these commercial products, such as horticulture, prefabricated lightweight structures and building structures.     

Nitrogen availability from composts for humid region perennial grass and legume-grass forage production

Perennial forages may be ideally suited for fertilization with slow N release amendments such as composts, but difficulties in predicting N supply from composts have limited their routine use in forage production. A field study was conducted to compare the yield and protein content of a binary legume-grass forage mixture and a grass monocrop cut twice annually, when fertilized with diverse composts. In all three years from 1998-2000, timothy (Phleum pratense L.)-red clover (Trifolium pratense L.) and timothy swards were fertilized with ammonium nitrate (AN) at up to 150 and 300 kg N ha(-1) yr(-1), respectively. Organic amendments, applied at up to 600 kg N ha(-1) yr(-1) in the first two years only, included composts derived from crop residue (CSC), dairy manure (DMC), or sewage sludge (SSLC), plus liquid dairy manure (DM). Treatments DM at 150 kg N ha(-1) yr(-1) and CSC at 600 kg N ha(-1) yr(-1) produced cumulative timothy yields matching those obtained for inorganic fertilizer. Apparent nitrogen recovery (ANR) ranged from 0.65% (SSLC) to 15.1% (DMC) for composts, compared with 29.4% (DM) and 36.5% (AN). The legume component (approximately 30%) of the binary mixture acted as an effective "N buffer" maintaining forage yield and protein content consistently higher, and within a narrower range, across all treatments. Integrating compost utilization into livestock systems that use legume-grass mixtures may reduce the risk of large excesses or deficits of N, moderate against potential losses in crop yield and quality, and by accommodating lower application rates of composts, reduce soil P and K accumulation.     

Effect of amendment of bauxite processing sand with organic materials on its chemical,physical and microbial properties

The effects of addition of a range of organic amendments (biosolids, spent mushroom compost, green waste compost and green waste-derived biochar), at two rates, on some key chemical, physical and microbial properties of bauxite-processing residue sand were studied in a laboratory incubation study. Levels of exchangeable cations were not greatly affected by additions of amendments but extractable P was increased significantly by mushroom and green waste composts and massively (i.e. from 11.8 to 966 mg P kg^?1) by biosolids applications. Levels of extractable NO₃^?–N were also greatly elevated by biosolids additions and there was a concomitant decrease in pH. Addition of all amendments decreased bulk density and increased mesoporosity, available water holding capacity and water retention at field capacity (?10 kPa), with the higher rate having a greater effect. Addition of biosolids, mushroom compost and green waste compost all increased soluble organic C, microbial biomass C, basal respiration and the activities of β-glucosidase, L-asparaginase and alkali phosphatase enzymes. The germination index of watercress grown in the materials was greatly reduced by biosolids application and this was attributed to the combined effects of a high EC and high concentrations of extractable P and NO₃^?. It was concluded that the increases in water storage and retention and microbial activity induced by additions of the composts is likely to improve the properties of bauxite-processing residue sand as a growth medium but that allowing time for soluble salts, originating from the organic amendments, to leach out may be an important consideration before sowing seeds.     

White spruce response to co-composted hydrocarbon-contaminated drilling waste: effects of compost age and nitrogen fertilization

There are growing interests to use co-composted drilling wastes contaminated with hydrocarbons as growth media for planting in land reclamation. However, such use of the compost may have potential problems such as inherent toxicity of residual hydrocarbon and microbial N immobilization due to high compost C to N ratios. We investigated the growth, biomass production, N uptake, and foliar delta13C of white spruce (Picea glauca [Moench] Voss) seedlings in a pot experiment using 1-, 2-, 3-, and 4-yr-old composts (with different hydrocarbon concentrations and C to N ratios) and a local noncontaminated soil with (200 kg N ha(-1)) or without N fertilization. Growth and N content of seedlings (particularly N content in roots) were lower when grown in the compost media as compared with those grown in the soil. Within the compost treatments seedling growth was affected by compost age, but the magnitude of growth reduction was not linearly proportional to hydrocarbon concentrations. Plant N uptake increased with compost age, which corresponds with an increase in indigenous mineral N concentration. Effects of N fertilization on N uptake were curtailed by the presence of indigenous mineral N (e.g., in the 4-yr-old compost) and by fertilization-induced stimulation of microbial activities (e.g., in the 1-yr-old compost). The differences in foliar delta13C values between seedlings grown in compost and soil (P < 0.05) suggest that limitations on water uptake caused by the residual hydrocarbon might have been the predominant factor limiting seedling growth in the compost media. This study suggests that water stress caused by residual hydrocarbons may be a critical factor for the successful use of co-composted drilling wastes as a growth medium.     

Leaching composted lignocellulosic wastes to prepare container media: Feasibility and environmental concerns

The leaching of salt and mineral elements from three composts prepared with residual vegetable crop biomass (melon, pepper or zucchini) was studied using methacrylate columns and distilled water. The benefits of the leached composts to be used for ornamental potted plant production were also analysed. After leaching 5 container capacities of effluent, both the electrical conductivity and the concentration of soluble mineral elements in compost leachates decreased substantially and remained close to the target levels. Composts reacted differently to leaching due to differences in the raw waste sources and the composting process and hence, in their physical and chemical characteristics. At the end of the experiment, after pouring 8 container capacities of water, the leaching efficiency of the salts was 96%, 93% and 87% for melon, pepper and zucchini-based composts, respectively. Mineral elements differed in their ability to be removed from the composts; N (NH₄⁺ and NO₃^?), K⁺, Na⁺, Cl^?, and SO₄^2? were leached readily, whereas H₂PO₄^?, Ca²⁺, and Mg²⁺ were removed hardly. Leached composts showed a range of physico-chemical and chemical characteristics suitable for use as growing media constituents. Potted Calendula and Calceolaria plants grew in the substrates prepared with the leached composts better than in those made with the non-leached ones. Finally, special emphasis must be paid to the management of the effluents produced under commercial conditions to avoid environmental pollution.     

Evaluation of extracted organic carbon and microbial biomass as stability parameters in ligno-cellulosic waste composts

Extracted organic C and microbial biomass were evaluated as stability parameters in 3 different ligno-cellulosic waste composts. Organic C was extracted by both water and alkali and further separated in humic-like carbon (HLC) and nonhumic carbon (NHC). Conventional humification parameters, such as humification index and degree of humification were calculated from NHC and HLC. Microbial biomass carbon (B(C)) was determined as an indicator of the degree of biochemical transformation, whereas ninhydrin reactive N (B(NIN)) was measured to obtain the stability parameter B(NIN)/N(TOT) (N(TOT), total N). The water-extracted organic C did not provide reliable information on the transformations underwent by the ligno-cellulosic wastes during composting, since its content remained almost unaltered during the whole process. In contrast, parameters based on the alkali-extracted organic C and microbial biomass clearly reflected organic matter (OM) changes during the process. There was an increase in the net amount of HLC in the alkali extracts throughout composting, especially in the first 7 to 12 wk of the process, as well as a relative enrichment of HLC with respect to NHC. Values of humification index and degree of humification in end products were consistent with an adequate level of compost stability. The stability parameter B(NIN)/N(TOT) showed to be a reliable indicator of stability in ligno-cellulosic wastes. Parameters based on the alkali-extracted C and microbial biomass clearly reflected the transformation of the OM during composting and can be used as stability parameters in ligno-cellulosic waste composts.     

Chemical and physical changes following co-composting of beef cattle feedlot manure with phosphogypsum

Nitrogen (N) loss during beef cattle (Bos taurus) feedlot manure composting may contribute to greenhouse gas emissions and increase ammonia (NH(3)) in the atmosphere while decreasing the fertilizer value of the final compost. Phosphogypsum (PG) is an acidic by-product of phosphorus (P) fertilizer manufacture and large stockpiles currently exist in Alberta. This experiment examined co-composting of PG (at rates of 0, 40, 70, and 140 kg PG Mg(-1) manure plus PG dry weight) with manure from feedlot pens bedded with straw or wood chips. During the 99-d composting period, PG addition reduced total nitrogen (TN) loss by 0.11% for each 1 kg Mg(-1) increment in PG rate. Available N at the end of composting was significantly higher for wood chip-bedded (2180 mg kg(-1)) than straw-bedded manure treatments (1820 mg kg(-1)). Total sulfur (TS) concentration in the final compost increased by 0.19 g kg(-1) for each 1 kg Mg(-1) increment in PG rate from 5.2 g TS kg(-1) without PG addition. Phosphogypsum (1.6 g kg(-1) P) addition had no significant effect on total phosphorus (TP) concentration of the final composts. Results from this study demonstrate the potential of PG addition to reduce overall N losses during composting. The accompanying increase in TS content has implications for use of the end-product on sulfur-deficient soils. Co-composting feedlot manure with PG may provide an inexpensive and technologically straightforward solution for managing and improving the nutrient composition of composted cattle manure.     

Leachability and phytoavailability of nitrogen, phosphorus, and potassium from different bio-composts under chloride- and sulfate-dominated irrigation water

Concerns over increased phosphorus (P) application with nitrogen (N)-based compost application have shifted the trend to P-based composed application, but focusing on one or two nutritional elements does not serve the goals of sustainable agriculture. The need to understand the nutrient release and uptake from different composts has been further aggravated by the use of saline irrigation water in the recent scenario of fresh water shortage. Therefore, we evaluated the leachability and phytoavailability of P, N, and K from a sandy loam soil amended with animal, poultry, and sludge composts when applied on a total P-equivalent basis (200 kg ha(-1)) under Cl(-) (NaCl)- and SO4(2-) (Na2SO4)-dominated irrigation water. Our results showed that the concentration of dissolved reactive P (DRP) was higher in leachates under SO(4)(2-) than Cl(-) treatments. Compost amendments differed for DRP leaching in the following pattern: sludge > animal > poultry > control. Maize (Zea mays L.) growth and P uptake were severely suppressed under Cl(-) irrigation compared with SO4(2-) and non-saline treatments. All composts were applied on a total P-equivalent basis, but maximum plant (shoot + root) P uptake was observed under sludge compost amendment (73.4 mg DW(-1)), followed by poultry (39.3 mg DW(-1)), animal (15.0 mg DW(-1)), and control (1.2 mg DW(-1)) treatment. Results of this study reveal that irrigation water dominated by SO4(2-) has greater ability to replace/leach P, other anions (NO3(-)), and cations (K+). Variability in P release from different bio-composts applied on a total P-equivalent basis suggested that P availability is highly dependent on compost source.     

Structure and thermal stability of toxic chromium(VI) species doped onto TiO2 powders through heat treatment

Chromium(VI)-containing sorbents in the form of sludge or solid residue from treatment processes are often landfilled or used as fill materials, therefore the long-term stability of metal binding is important. The reduction of Cr(VI)–Cr(III) through heat treatment may be a useful detoxification method. After heating at 500, 900, 1000, and 1100 °C for 4 h, the transformation of chemical states of chromium on 105 °C-dried, 7.9% Cr(VI)-doped TiO₂ powders was studied on the basis of surface area measurements, scanning electron microscopy (SEM) images, X-ray diffraction (XRD), and extended X-ray absorption fine structure (EXAFS) spectra. It was shown that Cr(VI) was reduced to Cr(III) in the Cr(VI)-doped samples after heating within 500–900 °C. The present results also suggested that the chromium octahedral was bridged to the titanium tetrahedral and was incorporated in TiO₂ minerals formed after 1000 °C treatment.     

Nitrogen management considerations for landspreading municipal solid waste compost

Many municipalities have examined composting as an alternative to landfilling for the management of organic solid waste materials. Ultimately these materials will be land-applied and therefore some knowledge of nutrient availability will be necessary to optimize crop yield and minimize environmental risk. Field studies were conducted in 1993 and 1994 on a silt loam and a loamy sand soil in Wisconsin to determine the effect of municipal solid waste compost (MSWC) on corn (Zea mays L.) yield, plant nutrient concentration, and soil nitrate N content. Municipal solid waste composts with ages of 7, 36, and 270 d were applied at rates of 22.5, 45, and 90 Mg ha(-1) to small plots. Rates of commercial nitrogen (N) fertilizer, ranging from 0 to 179 kg N ha(-1), were applied to separate plots to determine the N availability from the MSWC. Treatments were applied in the spring and incorporated before planting corn. The 270-d MSWC increased corn whole-plant dry matter and grain yield at each location in both years above the 7- and 36-d MSWC. Rate of MSWC only affected grain yield at the loamy sand site in 1994. Municipal solid waste compost had minimal effect on the levels of plant nutrients in the whole-plant tissue measured at physiological maturity. Nitrate N measured in the top 90 cm of soil was higher throughout the growing season in treatments receiving recommended N fertilizer when compared with any of the MSWC treatments. It was estimated that 6 to 17% of the total N in the 270-d MSWC became available in the first year. The land-application of mature MSWC at the tested rates would be an agronomically and environmentally admissible practice.     

Environmental and socio-economic assessment of co-combustion of coal, biomass and non-hazardous wastes in a Power Plant

Under the framework of the European project named COPOWER, the possibility to partially substitute coal used in a 243 MW_th Power Plant by biomass and non-hazardous wastes for the production of electricity and steam was assessed. Three combustion scenarios were studied, based on the combustion tests performed in a Power Plant located in Duisburg (Germany): Scenario 0 (Sc0) - combustion of coal; Scenario 1 (Sc1) - combustion of coal + sewage sludge (SS) + meat and bone meal (MBM); Scenario 2 (Sc2) - coal + SS + wood pellets (WP). An environmental and socio-economic assessment of these three scenarios was performed. In the environmental point of view, Sc0 was the worst scenario, mainly due to the emission of greenhouse gases (GHG). Sc1 was the best scenario, mainly due to the reduction of GHG emission, eutrophication chemical species and ozone depletion gases. In the socio-economic point of view, Sc0 was the worst scenario, mainly due to the absence of GHG abatement, and Sc1 was the best scenario due to the best cost of electricity production and negative cost of avoided emissions.     

The influence of the precursor and synthesis method on the CO2 capture capacity of carpet waste-based sorbents

Adsorption is one of the most promising technologies for reducing CO₂ emissions and at present several different types of sorbents are being investigated. The use of sorbents obtained from low-cost and abundant precursors (i.e. solid wastes) appears an attractive strategy to adopt because it will contribute to a reduction not only in operational costs but also in the amount of waste that is dumped and burned in landfills every year. Following on from previous studies by the authors, in this work several carbon-based adsorbents were developed from different carpet wastes (pre-consumer and post-consumer wastes) by chemical activation with KOH at various activation temperatures (600–900 °C) and KOH:char impregnation ratios (0.5:1 to 4:1). The prepared materials were characterised by chemical analysis and gas adsorption (N₂, −196 °C; CO₂, 0 °C), and tested for CO₂ adsorption at temperatures of 25 and 100 °C. It was found that both the type of precursor and the conditions of activation (i.e. impregnation ratios, and activation temperatures), had a huge influence on the microporosity of the resultant samples and their CO₂ capture capacities. The carbon-based adsorbent that presented the maximum CO₂ capture capacities at 25 and 100 °C (13.8 wt.% and 3.1 wt.%, respectively), was prepared from a pre-consumer carpet waste and was activated at 700 °C using a KOH:char impregnation ratio of 1:1. This sample showed the highest narrow microporosity volume (0.47 cm³ g⁻¹), thus confirming that only pores of less than 1 nm are effective for CO₂ adsorption at atmospheric pressure.     

Improvement of fruit and vegetable waste anaerobic digestion performance and stability with co-substrates addition

The effect of fish waste (FW), abattoir wastewater (AW) and waste activated sludge (WAS) addition as co-substrates on the fruit and vegetable waste (FVW) anaerobic digestion performance was investigated under mesophilic conditions using four anaerobic sequencing batch reactors (ASBR) with the aim of finding the better co-substrate for the enhanced performance of co-digestion. The reactors were operated at an organic loading rate of 2.46–2.51 g volatile solids (VS) l⁻¹ d⁻¹, of which approximately 90% were from FVW, and a hydraulic retention time of 10 days. It was observed that AW and WAS additions with a ratio of 10% VS enhanced biogas yield by 51.5% and 43.8% and total volatile solids removal by 10% and 11.7%, respectively. However FW addition led to improvement of the process stability, as indicated by the low VFAs/Alkalinity ratio of 0.28, and permitted anaerobic digestion of FVW without chemical alkali addition. Despite a considerable decrease in the C/N ratio from 34.2 to 27.6, the addition of FW slightly improved the gas production yield (8.1%) compared to anaerobic digestion of FVW alone. A C/N ratio between 22 and 25 seemed to be better for anaerobic co-digestion of FVW with its co-substrates. The most significant factor for enhanced FVW digestion performance was the improved organic nitrogen content provided by the additional wastes. Consequently, the occurrence of an imbalance between the different groups of anaerobic bacteria which may take place in unstable anaerobic digestion of FVW could be prevented.     

不同菌剂处理下猪粪和牛粪堆肥前期性质变化

以猪粪和牛粪为堆肥原料,设计了人工接种MixF-3菌剂堆肥、添加灭活菌剂堆肥和自然堆肥3个处理进行堆肥前期实验,探讨堆肥9d过程中温度、水分、有机碳、全氮和微生物量碳等参数的变化。结果表明,按1L/t接种MixF-3混合菌剂堆肥温度升温快,猪粪堆肥第48h和第84h时温度分别达到66℃和71.5℃,牛粪堆肥第48h时温度达69℃,明显高于灭活菌剂处理组和CK对照组。随着堆肥的进行,各处理组水分含量缓慢下降,牛粪比猪粪含水量略高。人工接种菌剂的猪粪和牛粪堆肥处理组中pH变化幅度小,有机碳碳含量的下降幅度比灭活组和自然堆肥组大,分别下降15.64%和11.25%,全氮含量缓慢升高但变化不大,人工接种牛粪比猪粪处理组中堆肥全氮含量升幅高;在猪粪和牛粪堆肥中人工接种菌剂微生物量碳降幅最小,分别为9537μg/g和3212μg/g,表明在猪粪和牛粪堆肥原料中添加MixF-3复合菌剂有利于微生物繁殖生长,同时拓宽了菌剂使用的单一性,更具有普遍性意义。     

Quality assessment of composts in the Greek market: the need for standards and quality assurance

An extensive data survey and study of the Greek market for composts or products marketed as such was carried out in order to acquire a comprehensive image of the local situation, in view of the proposed operation of large municipal solid waste (MSW) composting facilities and EU legislation changes. Physical and chemical parameters (moisture, organic matter, electrical conductivity, pH and heavy metals), stability indicators (self-heating potential, germination index) and biological indicators (microbial population, pathogen indicators and selected pathogens) were analyzed for the assessment of product quality. Results revealed wide variations even within the same group of products, which is particularly significant for parameters directly related to environmental protection and public health. The heavy metal content ranged from levels exceeding the fairly lenient Greek standards to below the stringent limits for A+ class compost in Austria. About 25% of the composts examined met the heavy metal limits for the EU eco-label award. Salmonella spp. was not detected in any of the composts but Staphylococcus aureus and Clostridium perfringens were found in 17 and 96% of the composts respectively. Pathogen indicator microorganisms were present at levels above suggested limits in all the composts. The high variability of such important parameters in composts available on the Greek market suggests an urgent need for establishing quality assurance procedures and mechanisms in the country. Moreover, the wide range of limit values within EU member states suggests the need for developing EU compost quality standards, in order to harmonize the compost markets.