Best practice measures assessment for construction and demolition waste management in building constructions

Currently the construction and demolition (C&D) waste collection system in Spain is managed in a decentralized manner by each sub-contracted company. This lack of comprehensive strategy for C&D waste management causes a confusing and sometimes individual attitude regarding the different measures for C&D waste. Therefore effective waste management should be enforced. Construction stakeholders have wide range of best practices in C&D waste management that can be implemented, so they need to be assessed for their effectiveness.The aim of this research study is to assist construction stakeholders in making a decision on C&D waste management. This paper carries out a survey conducted among the construction agents in order to evaluate the effectiveness of 20 best practice measures regarding C&D waste management, identifying the most suitable types of building constructions to implement these practices and also the advantages and drawbacks of their performance in a building construction project.Results of this study show that among the highly effective best practices are: the use of industrialized systems and the contract of suppliers managing the waste. In addition, distributing small containers in the work areas is also another high valued practice, although only 36% of respondents usually implement this measure in their works.     

Modeling materials flow of waste concrete from construction and demolition wastes in Taiwan

Material flows of concrete from construction and demolition (C&D) waste in Taiwan have grown considerably over the last two decades, Hsiao et al. (2001). This increased flow puts pressure on limited national disposal capacity and has indirectly caused ecological damage to domestic riparian zones used as sources of natural aggregate. Using existing statistics and literature sources for C&D waste generation in Taiwan we have developed a dynamic model of domestic material flows of concrete waste and employ statistical analyses to obtain projections of future material flows. Our major findings are: (1) Taiwan’s rate of waste concrete generation in 2001 for the residential and commercial construction industry was approximately 2.4 Million Metric Tons (MMT) per year, averaging 0.11 metric tons of waste concrete generated annually by each Taiwanese; (2) Around the year 2009, the national rate will more than triple to exceed the spike in C&D concrete waste generation that occurred after the Chi Chi earthquake 9/21/99, 8.5 MMT. (3) Aside from pilot-scale development of waste concrete utilization technology, nationwide recycling rates remain negligible. Without resource recovery, the volume of C&D waste generation by 2009 is projected to occupy nearly 7% of all existing and planned domestic landfill capacity. A target is established to raise resource recovery rates for waste concrete to 50% by 2005 and a 100% nationwide recycling rate by 2009.     

Concrete block production from construction and demolition waste in Tanzania

In Tanzania, construction and demolition (C&D) waste is not recycled and knowledge on how it can be recycled especially into valuable products like building materials are still limited. This study aimed at investigating the possibility of recycling the C&D waste (mainly cementitious rubble) into building material in Tanzania. The building materials produced from C&D waste was concrete blocks. The concrete blocks were required to have a load bearing capacity that meets the building material standards and specifications. Eight C&D waste samples were collected from C&D building sites, transported to the recycling site, crushed, and screened (sieved) to get the required recycled aggregates. Natural aggregates were also used as control. The recycled aggregates were tested in the laboratory following the standard methods as specified in Tanzanian standards. The physical, mechanical and chemical characteristics were determined. The physical and mechanical results showed that recycled aggregates were weaker than natural aggregates. However, chemically they were close to natural aggregates and therefore suitable for use in new concrete block production. In the production process, each experiment utilized 100% recycled aggregates for both fine and coarse portions to replace natural aggregates. The Fuller's maximum density theory was used to determine the mix proportions of materials in which a method that specifies concrete mix by system of proportion or ratio was used. The concrete blocks production processes included batching, mixing (that was done manually to get homogeneous material), compacting and moulding by hand machine and curing in water. After 28 days of curing, the concrete blocks were tested in the laboratory on compressive strength, water absorption ratio and density. The results showed that the blocks produced with 100% recycled aggregates were weaker than those with natural aggregates. However, the results also showed that there is a possibility of recycling the C&D waste into building material because 85% of the tested concrete block specimens from recycled aggregates achieved a compressive strength of 7 N/mm², which is defined as the minimum required load bearing capacity in Tanzania. Therefore, the C&D waste could be a potential resource for building material production for sustainable construction in Tanzania rather than discarding it. Further work should focus on the economic feasibility of production of concrete blocks with recycled aggregates in Tanzania.     

A model for cost-benefit analysis of construction and demolition waste management throughout the waste chain

Economic instrument is indubitably perceived as effective for encouraging or forcing contractors to conduct environmentally friendly construction practices. Previous studies in relation to this topic mainly put emphasis on economic analysis of construction and demolition (C&D) waste management from a static point of view, which failed to consider its dynamics nature by integrating all essential activities throughout the waste chain. This paper is thus intended to highlight the dynamics and interrelationships of C&D waste management practices and analyze the cost-benefit of this process using a system dynamics approach. Data related to concrete and aggregate of a construction project in Shenzhen was collected for the application of the proposed model. The findings reveal that net benefits from conducting C&D waste management will occur, but a higher landfill charge will lead to a higher net benefit, as well as an earlier realization of the net benefit. In addition, the general public under a higher landfill charge will suffer from a higher environmental cost caused by illegal dumping. The simulation results also suggest that current regulation in Shenzhen should be promoted to facilitate a dramatic increase in net benefit from the implementation of C&D waste management. This research is of value in facilitating better understanding on the dynamics of C&D waste management activities throughout the waste chain, as well as providing a tool for simulating the cost-benefit of C&D waste management practices over the project duration.     

Analysis of the implementation of effective waste management practices in construction projects and sites

In this paper, the implementation of effective waste management practices in construction projects and sites is analyzed, using data from a survey answered by 74 Spanish construction companies based in Catalonia. Most commonly implemented practices were found to be on-site cleanliness and order, correct storage of raw materials, and prioritization of the nearest authorized waste managers. The least widespread practices were the use of a mobile crusher on site, the creation of individualized drawings for each construction site, and the dissemination of the contents of the waste management plan to all workers, to help them to meet its requirements. Waste regulations for construction and demolition, and the corresponding construction waste management facilities, were designed before the recession in the Spanish construction sector. Current waste generation rates are still below predicted levels, and the infrastructure was designed for five times more waste generation. Even so, the percentage of reused and recycled waste currently amounts to 43%. Survey respondents highlighted various instruments and measures that would make the management of construction and demolition waste more sustainable. Most of the opportunities identified by construction firms are within the scope of government and related to a combined system of bonus and penalties and the establishment of environmental awareness and training programmes for all the stakeholders. Within the scope of authorized waste managers, firms suggested improvements such as the standardization of fees, a reduction of the time until the issue of waste management certificates, a higher number of inspections, and a change in the current model of a few large construction waste management facilities. This research is useful to better understand the current status of construction and demolition waste management in construction projects and sites. Thus, the results of this research will guide policy makers and relevant stakeholders such as contractors, clients, architects and engineers to achieve the EU target of recovering 70% of construction and demolition waste in 2020. In this sense, reliable information can help governments and professional associations to set future C&D waste management regulations, training programmes and dissemination tools, inspections, etc.     

建筑废弃物再生利用的可行性技术研究综述

建材行业的发展为城市化建设提供了重要保障,在我国城市化快速发展、建筑材料需求旺盛的带动下,建材行业发展强劲,但大多属于高能耗高污染行业,加之城市拆迁改造产生大量建筑废弃物,环境压力十分巨大,必须加强建筑废弃物的环境管理。对建筑废弃物再利用、再循环以及减少建筑废弃物是解决建筑行业环境问题的重要方式,实施这些仍有很大的提升空间。本文回顾了近年来建筑废弃物再生利用方面的各种可行性技术。主要是针对沥青、砖、混凝土、金属、玻璃等几种物质再生利用的可行性技术进行综述,为未来建筑废弃物再生利用领域提供参考。     

Decisions on recycling: Construction stakeholders’ decisions regarding recycled mineral construction materials

Construction and demolition (C&D) waste, being already the largest waste fraction in industrialized countries, is expected to increase in the future. C&D waste recycling has been considered to be a valuable option not only for minimizing C&D waste streams to landfills but also for mitigating primary mineral resource depletion. Even though the use of recycled mineral construction materials (RMCM) is regulated and successful application examples are available, construction stakeholders do not yet broadly apply them. Although various criteria hindering a transition towards a broader application of RMCM have been identified, it is yet unknown how these criteria differ among decisions, stakeholders and applications. We therefore analyze construction stakeholders’ behavior, and decision-making regarding RMCM for the construction material market in Switzerland. Stakeholders’ decision-making was quantified with the analytical hierarchy process (AHP) in a survey in combination with their behavior. The results demonstrate the importance of stakeholder interaction, i.e. most stakeholders decide which material to apply based on interaction with other stakeholders e.g., recommendations and specifications. However, the initial general specification by awarding authorities that construction should be sustainable has little relevance to the subsequent material decisions. On the contrary the role of the recommendation of engineers, have a high impact on the subsequent decisions by the other stakeholders. Results also confirm that RMCM are broadly accepted in civil engineering (CE), whereas in structural engineering (SE) RMCM are still a niche product. The good alignment of the outcome of decision modeling with observed behavior shows the usefulness of analyzing decision-making with AHP.     

An energetic life cycle assessment of C&D waste and container glass recycling in Cape Town,South Africa

This study presents the results of a comparative life cycle assessment (LCA) on the energy requirements and greenhouse gas (GHG) emission implications of recycling construction and demolition (C&D) rubble and container glass in Cape Town, South Africa. Cape Town is a medium sized city in a developing country with a growing population and a rising middle class, two factors that are resulting in increased generation of solid waste. The City is constrained in terms of landfill space and competing demands for municipal resources.The LCA assessment was based on locally gathered data, supplemented with ecoinvent life cycle inventory data modified to the local context. The results indicated that recycling container glass instead of landfilling can achieve an energy savings of 27% and a GHG emissions savings of 37%, with a net savings still being achieved even if collection practices are varied. The C&D waste results, however, showed net savings only for certain recycling strategies. Recycling C&D waste can avoid up to 90% of the energy and GHG emissions of landfilling when processed and reused onsite but, due to great dependence on haulage distances, a net reduction of energy use and GHG emissions could not be confidently discerned for offsite recycling. It was also found that recycling glass achieves significantly greater savings of energy and emissions than recycling an equivalent mass of C&D waste.The study demonstrated that LCA provides an important tool to inform decisions on supporting recycling activities where resources are limited. It also confirmed other researchers’ observations that strict adherence to the waste management hierarchy will not always result in the best environmental outcome, and that more nuanced analysis is required. The study found that the desirability of recycling from an energy and climate perspective cannot be predicted on the basis of whether such recycling conserves a non-renewable material. However, recycling that replaces a virgin product from an energy-intensive production process appears to be more robustly beneficial than recycling that replaces a product with little embodied energy. Particular caution is needed when applying the waste management hierarchy to the latter situations.     

A system dynamics model for evaluating the alternative of type in construction and demolition waste recycling center - The case of Chongqing, China

This paper presents a system dynamics computer model to evaluate alternative type of recycling center under different policy and economy environments through comparison on the economic feasibility of recycling centers and ratio of savings to costs in C&D waste management. A case study for the City of Chongqing, China is selected. Simulated results show three key factors can contribute to the economic feasibility of recycling and the ratio of savings to costs in C&D waste management: (a) profit; (b) unit recycling cost; (c) extra revenue from location advantage (It was assumed that the mobile centers can attain extra revenue from the location advantage compared with fixed recycling centers). The sensitive analysis and comparison on ratios between public and private sector indicate that to achieve the optimum ratio of savings to costs, design of recycling centers and selection of governmental instruments are determined by the priority list: (1) low extra revenue from location advantage; (2) low profit; (3) low unit recycling cost. Meanwhile, the fluctuation of the three factors must be prior to achieve economic feasibility of corresponding recycling centers.     

Use of inert C&D materials for seawall foundation: A field-scale pilot test

The generation rate of construction and demolition (C&D) materials in Hong Kong has well exceeded the demand rate. An innovative solution has been developed by the Hong Kong Special Administrative Region Government to use the inert portion of C&D materials, denoted as public fill, for seawall foundation construction. A field-scale pilot test has been conducted to evaluate the constructability and engineering performance of the foundation so as to establish the viability of the solution. Details of the pilot test and results of the performance evaluation are presented in this paper. More importantly, the viability of an innovation solution to achieve effective allocation of sand fill resources, and conservation and recycling of inert C&D materials has been established.     

Assessing the accumulation of construction waste generation during residential building construction works

The difficulty of dealing with construction and demolition waste (CDW) on construction sites is not new and continues to be an environmental problem. Understanding the waste generated in a construction work is essential to optimize CDW management. Therefore, any tool used for establishing an estimation of the CDW that will be generated should be considered as an alternative to achieve real solutions pursuing sustainability. This paper presents the evolution of CDW flow generation in the construction of new residential buildings, and has identified that the construction activity is increasing the waste generation. In an attempt to find some solutions and provide improved alternatives, several building sites have been analysed in order to quantify the estimation of CDW generated. Results show that when using plasterboard walls the CDW generation, per m² of built surface can be reduced up to 15.94% compared to the use of traditional brick partitions. In addition, a model describing the accumulation of CDW throughout the project duration is proposed. This model states that CDW mainly accumulates in the middle stages of the project. This study allows an estimation of the amount of CDW to be generated in a building construction site, helping to plan the number and size of containers required at any moment of the construction process, as well as the space required for a proper CDW management.     

有色金属工业固废资源属性多维度评价体系构建——以锡尾矿为例

提升固废综合利用水平是近年各类政策、法规、标准的要求,从固废资源属性入手,全面分析和评价固废资源属性特征,有利于固废综合利用技术的开发应用,是提升固废综合利用水平的有效途径。本文针对目前固废资源属性特征评价体系缺失、资源属性数据缺乏等问题,以有色金属工业固废为例建立了一套资源属性评价体系。从有色金属工业固废自身的物质和能量属性,以及使其成为固废的环境、经济、技术、社会等6个维度构建评价指标体系,形成定性和定量相结合的14项指标,并以锡尾矿为例,进行实证。结果表明,除能量维度外,对锡尾矿开展资源化利用的综合潜力较大,其最具潜力的利用途径是回收有价金属,其次是作为陶瓷制品的原料,评价也指出未来在锡尾矿作为建材利用的技术方面仍需要加强研发和应用推广。评价结果以定量为主结合定性描述,为锡尾矿资源化利用方向提供了具体参照和指导,也为探索固废资源属性全面评价、完善固废资源属性数据库提供理论和方法学的借鉴。     

Use of recycled products in UK construction industry: An empirical investigation into critical impediments and strategies for improvement

Construction industry consumes about half of all material resources taken from nature, and generates a large portion of waste to landfill. A way of tackling negative environmental impacts impending from continuous material extraction and waste generation is the use of recycled materials for construction projects. However, the use of recycled materials is yet to become a commonplace in construction industry. This study evaluates the factors hampering the use of recycled products in UK construction industry as well as strategies that could be adopted to enhance its use in the industry. In order to identify the impediments and critical strategies, a two-fold methodical approach was used. An unstructured interview preceded a quantitative questionnaire survey which was used to elicit broader industry practitioners’ opinion.The study shows that designers rarely specify recycled products. This is due to lack of adequate information about quality and market availability of the products, negative perception from clients, and unexpectedly high cost of the products, despite its perceived low quality. The study suggests that a number of strategies could be adopted to promote the use of the products. These include allocation of points to the use of recycled products in sustainable design appraisal tools, governments legislative measures, improved collaboration between designers, contractors and materials suppliers, contractors involvement at earlier stage of design, improved education of the professionals about the products, and the use of tax break to influence the cost of the products. The findings of this study would therefore help policy makers, manufacturers and construction professionals to identify the factors hampering the use of recycled products for construction projects as well as the strategies that could be adopted in order to create market for the products.     

Critical factors for waste management in office building retrofit projects in Australia

Office building retrofit is a sector being highlighted in Australia because of the mature office building market characterised by a large proportion of ageing properties. The increasing number of office building retrofit projects strengthens the need for waste management. Retrofit projects possess unique characteristics in comparison to traditional demolition and new builds such as partial operation of buildings, constrained site spaces and limited access to as-build information. Waste management activities in retrofit projects can be influenced by issues that are different from traditional construction and demolition projects. However, previous research on building retrofit projects has not provided an understanding of the critical issues affecting waste management.This research identifies the critical factors which influence the management of waste in office building retrofit projects through a literature study and a questionnaire survey to industry practitioners. Statistical analysis on a range of potential waste issues reveals the critical factors, as agreed upon by survey respondents in consideration of their different professional responsibilities and work natures. The factors are grouped into five dimensions, comprising industry culture, organisational support and incentive, existing building information, design, and project delivery process. The discussions of the dimensions indicate that the waste management factors of office building retrofit projects are further intensified compared to those for general demolition and construction because retrofit projects involve existing buildings which are partially operating with constrained work space and limited building information. Recommendations for improving waste management in office building retrofit projects are generalised such as waste planning, auditing and assessment in the planning and designing stage, collaboration and coordination of various stakeholders and different specialists, optimised building surveying and BIM technologies for waste analysis, and new design strategies for waste prevention.     

Reverse logistics in the Brazilian construction industry

In Brazil most Construction and Demolition Waste (C&D waste) is not recycled. This situation is expected to change significantly, since new federal regulations oblige municipalities to create and implement sustainable C&D waste management plans which assign an important role to recycling activities. The recycling organizational network and its flows and components are fundamental to C&D waste recycling feasibility. Organizational networks, flows and components involve reverse logistics. The aim of this work is to introduce the concepts of reverse logistics and reverse distribution channel networks and to study the Brazilian C&D waste case.     

中国废弃手机回收的管理策略研究

作为“城市矿产”的典型代表，废弃手机因其废弃数量大、稀贵金属品位高等特性而备受关注，但在推进废弃手机回收过程中存在诸多问题。本文以推动产业发展为立足点，梳理了影响废弃手机回收的两级制衡要素，通过构建GREY-DEMATEL模型，定量评估各要素对废弃手机回收的影响程度并确定优先等级。其中，完善废弃手机回收的管理制度及相应的经济扶持政策成为短期内应着力解决的核心问题，从长期发展来看，废弃手机的前端收集应成为产业关注的重点。基于此，本文立足于废弃手机回收的短期目标及长远发展，分别提出相应的管理策略，为再生资源产业的良性发展提供对策建议。     

我国废物进口综合管理技术对策研究

随着废物进口数量的增长、废物再生利用行业的成长、废物越境转移形势的变化和环境保护事业的不断发展,废物进口环境管理经历了从无到有并且逐步完善的过程,成为我国固体废物环境管理工作的重要内容。当前我国废物进口管理还存在着部分种类废物进口行业利用水平较低、废物非法越境转移压力长期存在和能力建设步伐与管理需求不相适应等问题。针对存在的问题,采取合理有效的应对措施,进一步完善相关法律、法规,推进“圈区管理”,鼓励统一管理和污染集中防治,探索建立企业环保信誉管理机制,加强源头风险控制,完善国际合作机制,使我国进口废物管理向兼顾环境、经济协调发展的综合管理模式转变。     

Critical factors in effective construction waste minimization at the design stage: A Shenzhen case study,China

Construction waste minimization at the design stage is a key strategy in effective waste reduction. However, it seems that few studies focus on exploratory factors that can significantly improve the design of construction waste minimization. This paper addresses this research gap by presenting a set of critical factors that inform and improve the practice of waste minimization design, particularly in the context of Shenzhen, China. Nineteen potential factors which can influence effective waste minimization are presented based on related official guidelines, reports and literature. Top institutions in Shenzhen that have received a Grade A building design certification were surveyed through a questionnaire. From this survey, six critical factors are derived: (1) large-panel metal formworks, (2) prefabricated components, (3) fewer design modifications, (4) modular design, (5) waste reduction investment and (6) economic incentive. The applicability and significance of the identified critical factors for effectively designing waste minimization are also explored. These critical factors not only provide designers and project managers with a useful set of criteria for effective design strategies to reduce construction waste, but also serve as valuable references for the government to formulate related construction waste minimization regulations.     

关于我国外来物种入侵的立法思考

随着全球经济一体化体系的发展,维护生物多样性、防治外来物种入侵成为世界各国关注的问题。我国面对外来物种入侵严重的现状,其相关的法律法规存在着明显缺陷,对外来物种入侵方面的立法也相当滞后。这种现状难以适应中国环境保护、经济和社会和谐发展的需要,也难以符合我国生物多样性保护的要求。文章对国际社会防治外来物种入侵相关立法及美国、日本的先进立法经验进行了分析,结合我国的国情,对我国创设外来物种入侵法律制度和修订相关法律法规上提出了意见和建议,以期通过法律手段有效地防治外来物种的入侵,并促进我国对防治外来物种入侵的相关立法。     

Identification of non-value adding (NVA) activities in precast concrete installation sites to achieve low-carbon installation

The lean production philosophy has been applied in the construction industry to reduce waste and increase efficiency. It is until recently that the lean philosophy has proven to be effective to meet the challenges of sustainable development. Many studies have shown that lean philosophy can be applied in precast concrete factories to lower inventory, reduce waste and increase efficiency. However, the precast concrete installation cycle should not be overlooked following a life cycle perspective. This study adopts a weighted factor model comprising 30 contractors in the Singapore construction industry and a case study. Construction site layout management practices are investigated using the weighted factor model. Strategies to improve the construction site layout are presented in a case study. The results indicated that there are many non-value adding activities in the site layout management practices that contribute to an increase in the carbon emissions level. Little consideration of green building materials, improper specifications of the precast concrete products, lack of an uninterrupted workflow, and inaccurate estimation of seem to be the most important ones. The results provide good practice guidance and can be used as a checklist for contractors to identify the NVA activities in the installation sites to achieve low-carbon installation. The results will also be useful for regulatory agencies to provide recommendations for contractors to improve the installation procedure and reduce carbon emissions.