Performance Assessment of Rain Gardens1

Abstract: The most widely used approach for evaluating the performance of stormwater best management practices (BMPs) such as rain gardens is monitoring, but this approach can involve a long time period to observe a sufficient number and variety of storm events, a high level of effort, and unavoidable uncertainty. In this paper, we describe the development and evaluation of three approaches for performance assessment of rain gardens: visual inspection, infiltration rate testing, and synthetic drawdown testing. Twelve rain gardens in Minnesota underwent visual inspection, with four determined to be nonfunctional based on one or more of the following criteria: (1) presence of ponded water, (2) presence of hydric soils, (3) presence of emergent (wetland) vegetation, and (4) failing vegetation. It is believed that these rain gardens failed due to a lack of maintenance. For the remaining eight rain gardens, an infiltrometer was used to determine the saturated hydraulic conductivity (K_sat) of the soil surface at several locations throughout each basin in what is termed infiltration rate testing. The median K_sat values for the rain gardens ranged from 3 to 72 cm/h. Synthetic drawdown testing was performed on three rain gardens by filling the basins with water to capacity where possible and recording water level over time. The observed drain times for two of those rain gardens were in good agreement with predictions based on the median of the infiltrometer measurements. The observed drain time for the third rain garden was much greater than predicted due to the presence of a restrictive soil layer beneath the topsoil. The assessment approaches developed in this research should prove useful for determining whether the construction of the rain garden was performed properly, a rain garden is functioning properly, and for developing maintenance tasks and schedules.     

生命周期评价在我国固体废物环境管理中的应用

生命周期评价是评价产品、工艺或活动（服务）整个生命周期阶段有关环境负荷,进而辨识和评价减少环境影响机会的一种非常有用的工具。将生命周期评价应用于固体废物环境管理,无疑对于我国建立科学化的固体废物环境管理模式具有十分重要的作用。本文对生命周期评价的定义、主要阶段、应用工具、特点进行了阐述,并对生命周期评价如何应用于我国固体废物环境管理进行了探讨。     

Life cycle assessment analysis of active and passive acid mine drainage treatment technologies

Acid mine drainage (AMD), resulting from open-cast coal mining, is currently one of the largest environmental challenges facing the mining industry. In this study, a life cycle assessment (LCA) was conducted to evaluate the environmental impacts associated with the construction, operation and maintenance of different AMD treatment options typically employed. LCA is a well-reported tool but is not documented for AMD treatment systems despite their ubiquitous implementation worldwide. This study conducted detailed LCA analysis for various passive and active AMD treatment approaches implemented or considered at a major coal mine in New Zealand using a comparative functional unit of kg acidity removed per day for each treatment option. Eight treatment scenarios were assessed including active limestone and hydrated lime treatments, and compared to passive treatments using limestone and waste materials such as mussel shells. Both midpoint and endpoint LCA impact categories were assessed. Generally, the active treatment scenarios demonstrated greater LCA impacts compared to an equivalent level of treatment for the passive treatment approaches. Lime slaking had the greatest LCA impacts, while passive treatment approaches incurred consistently less impacts except for one passive treatment with a purchased energy scenario. A 50% reduction in transportation distances resulted in the lowest LCA impacts for all scenarios. This study highlights the importance of evaluating the environmental and social impacts of AMD treatment for the mining industry.     

Transitions of municipal solid waste management. Part II: Hybrid life cycle assessment of Swiss glass-packaging disposal

In policy support of municipal solid waste (MSW) management, life cycle assessment (LCA) can serve to compare the environmental or economic impacts of two or more options for waste processing. The scope of waste management LCAs generally focuses less attention on future developments, e.g., where will recycling take place, and more on the environmental performance of prototypes, e.g., the incineration of all waste compared to recycling. To provide more robust support for Swiss waste glass-packaging disposal, scenarios of Swiss waste glass-packaging are assessed from a life cycle perspective. The scenarios consist in schemes for the disposal of the total amount of Swiss waste glass-packaging, i.e., different combinations of recycling and downcycling in Switzerland or abroad developed in Part I, Meylan et al. (2013). In this article (Part II), the disposal schemes are assessed with respect to eco-efficiency, an indicator that combines total environmental impacts and gross value added in Switzerland. Results show that no policy alternative guarantees environmental impact reductions and gross value added gains under all developments of exogenous constraints. Downcycling to foam glass in Switzerland is not only an environmentally sound disposal option, but it also buffers gross value added losses in case domestic recycling (and thus glass-packaging production in Switzerland) ceases in the future. The substitution of products based on raw materials other than Swiss cullet is the main responsible for change in environmental and economic impacts. Hence, an eco-efficiency maximizing policy should consider the products of disposal schemes. The combination of scenario analysis and eco-efficiency assessment as presented in this paper can be applied to other contexts (i.e., countries, waste fractions).     

Life cycle modelling of fossil fuel power generation with post-combustion CO2 capture

Due to its compatibility with the current energy infrastructures and the potential to reduce CO₂ emissions significantly, CO₂ capture and geological storage is recognised as one of the main options in the portfolio of greenhouse gas mitigation technologies being developed worldwide. The CO₂ capture technologies offer a number of alternatives, which involve different energy consumption rates and subsequent environmental impacts. While the main objective of this technology is to minimise the atmospheric greenhouse gas emissions, it is also important to ensure that CO₂ capture and storage does not aggravate other environmental concerns. This requires a holistic and system-wide environmental assessment rather than focusing on the greenhouse gases only. Life Cycle Assessment meets this criteria as it not only tracks energy and non-energy-related greenhouse gas releases but also tracks various other environmental releases, such as solid wastes, toxic substances and common air pollutants, as well as the consumption of other resources, such as water, minerals and land use. This paper presents the principles of the CO₂ capture and storage LCA model developed at Imperial College and uses the pulverised coal post-combustion capture example to demonstrate the methodology in detail. At first, the LCA models developed for the coal combustion system and the chemical absorption CO₂ capture system are presented together with examples of relevant model applications. Next, the two models are applied to a plant with post-combustion CO₂ capture, in order to compare the life cycle environmental performance of systems with and without CO₂ capture. The LCA results for the alternative post-combustion CO₂ capture methods (including MEA, K⁺/PZ, and KS-1) have shown that, compared to plants without capture, the alternative CO₂ capture methods can achieve approximately 80% reduction in global warming potential without a significant increase in other life cycle impact categories. The results have also shown that, of all the solvent options modelled, KS-1 performed the best in most impact categories.     

Nitrogen and Phosphorus Removal in a Rain Garden Flooded with Wastewater and Simulated Stormwater

Rain gardens, also known as bioretention cells, are low‐impact developments designed to mitigate several problems associated with urban stormwater. This four‐month field study involved a rain garden at a wastewater treatment plant in north‐central Texas in the United States of America. Partially treated wastewater from an anaerobic digester spilled into the rain garden at the beginning of the study. Subsequently, inflow and outflow concentrations of nitrogen and phosphorus were measured for nine simulated floods, preceded by dry‐spell intervals of 5, 8, or 12 days. Despite large inputs from the wastewater spill, the rain garden gradually processed and flushed the nitrogen. Longer dry spells tended to produce relatively higher outflow nitrate concentrations. A large pool of phosphorus in the soil restricted the rain garden's ability to reduce outflow orthophosphate concentrations, which were stable and lower than inflow concentrations throughout the study; however, adsorptive processes attenuated a relatively high inflow concentration by the end of the study.     

Evaluating Holistic Environmental Consequences of Brownfield Management Options Using Consequential Life Cycle Assessment for Different Perspectives

Brownfields are abandoned, idled, or underused sites whose reuse necessitates some sort of intervention. These sites are largely urban and are frequently contaminated. Brownfield management options can be associated with three types of environmental consequences: those resulting from changes in the site’s environmental quality (primary impacts); those resulting from the actual intervention stage (secondary impacts); and, if the vocation of the site changes, those resulting from effects on regional land use (tertiary impacts). Different stakeholders and decision-making contexts will place a different importance on each of these types of impacts. This article proposes a framework for comparing brownfield management options in regard to these three types of environmental impacts and for interpreting these results from different perspectives. The assessment framework is based on consequential life cycle assessment (LCA), which is shown to provide environmental information on the three types of impacts. The results for a case study are presented, where a “rehabilitation” option allowing residential redevelopment is compared to an “exposure minimization” option not resulting in the site being reused. Calculated primary and tertiary impacts are favorable to the rehabilitation option, whereas secondary impacts are favorable to the exposure minimization option. A ternary diagram presents the favorable option for different stereotypical perspectives. Tertiary impacts are much greater than secondary impacts, and consequently all perspectives that consider tertiary impacts favor rehabilitation. The perspective that considers primary and secondary impacts receives conflicting information. The ternary diagram, showing results for all perspectives, could possibly be useful for consensus-building among stakeholders.     

Environmental Assessment Framework for Policy Applications: Life Cycle Assessment,External Costs and Multi-criteria Analysis

The paper presents a framework for the analysis of external costs of environmental burdens, namely an impact pathway analysis, often coupled with the inventory stage of life cycle assessment (LCA). The ground rule is: quantify as much as possible in terms of burdens (pollutant emissions, etc.), impacts, and their monetary equivalent, then use multi-criteria analysis (MCA) for any remaining impacts that are considered to be too uncertain or defy quantification through to monetization. Although MCA could be used directly on estimates of burdens or impacts, monetary valuation provides a mechanism for consistent weighting of impacts categories based on assessment of public preference. Further advantages of extending LCA through detailed impact assessment combined with monetary valuation are that it greatly simplifies MCA by combining a large number of different environmental impact categories, thereby avoiding an unmanageably large number of criteria, and also facilitates cost benefit analysis (CBA). The risks are noted of inappropriate use of the tools or interpretation/use of the results, and recommendations are made for improved practice. These points are illustrated with examples. The key messages are: (1) that policies should be targeted correctly to give a clear signal which source of a burden should be reduced by how much; (2) that analysts should take into account the needs of policy makers and the link between the analysis and possible policy applications; and (3) that current LCA practice gives limited guidance in both areas, largely through a lack of consideration of the relative and absolute importance of different types of impact. However, this is precisely the strength of external costs analysis, particularly when used with MCA.     

Alternative scenarios to meet the demands of sustainable waste management

This paper analyses different alternatives for solid waste management that can be implemented to enable the targets required by the European Landfill and Packaging and Packaging Waste Directives to be achieved in the Valencian Community, on the east coast of Spain. The methodology applied to evaluate the environmental performance of each alternative is Life Cycle Assessment (LCA). The analysis has been performed at two levels; first, the emissions accounted for in the inventory stage have been arranged into impact categories to obtain an indicator for each category; and secondly, the weighting of environmental data to a single unit has been applied. Despite quantitative differences between the results obtained with four alternative impact assessment methods, the same preference ranking has been established: scenarios with energy recovery (1v and 2v) achieve major improvements compared to baseline, with scenario 1v being better than 2v for all impact assessment methods except for the EPS'00 method, which obtains better results for scenario 2v. Sensitivity analysis has been used to test some of the assumptions used in the initial life cycle inventory model but none have a significant effect on the overall results. As a result, the best alternative to the existing waste management system can be identified.     

Environmental assessment of supercritical water oxidation of sewage sludge

Environmental aspects of using supercritical water oxidation (SCWO) to treat sewage sludge were studied using a life cycle assessment (LCA) methodology. The system studied is the first commercial scale SCWO plant for sewage sludge in the world, treating sludge from the municipal wastewater treatment facility in Harlingen, TX, USA. The environmental impacts were evaluated using three specific environmental attributes: global warming potential (GWP), photo-oxidant creation potential (POCP) and resource depletion; as well as two single point indicators: EPS2000 and EcoIndicator99. The LCA results show that for the described process, gas-fired preheating of the sludge is the major contributor to environmental impacts, and emissions from generating electricity for pumping and for oxygen production are also important. Overall, SCWO processing of undigested sewage sludge is an environmentally attractive technology, particularly when heat is recovered from the process. Energy-conserving measures and recovery of excess oxygen from the SCWO process should be considered for improving the sustainability potential.     

Life cycle assessment of EPS and CPB inserts: design considerations and end of life scenarios

Expanded polystyrene (EPS) and corrugated paperboard (CPB) are used in many industrial applications, such as containers, shock absorbers or simply as inserts. Both materials pose two different types of environmental problems. The first is the pollution and resource consumption that occur during the production of these materials; the second is the growing landfills that arise out of the excessive disposal of these packaging materials. Life cycle assessment or LCA will be introduced in this paper as a useful tool to compare the environmental performance of both EPS and CPB throughout their life cycle stages. This paper is divided into two main parts. The first part investigates the environmental impacts of the production of EPS and CPB from 'cradle-to-gate', comparing two inserts--both the original and proposed new designs. In the second part, LCA is applied to investigate various end-of-life cases for the same materials. The study will evaluate the environmental impacts of the present waste management practices in Singapore. Several 'what-if' cases are also discussed, including various percentages of landfilling and incineration. The SimaPro LCA Version 5.0 software's Eco-indicator 99 method is used to investigate the following five environmental impact categories: climate change, acidification/eutrophication, ecotoxicity, fossil fuels and respiratory inorganics.     

LCA: A decision support tool for environmental assessment of MSW management systems

Life cycle assessment (LCA) can be successfully applied to municipal solid waste (MSW) management systems to identify the overall environmental burdens and to assess the potential environmental impacts. In this study, two methods used for current MSW management in Phuket, a province of Thailand, landfilling (without energy recovery) and incineration (with energy recovery), are compared from both energy consumption and greenhouse gas emission points of view. The comparisons are based on a direct activity consideration and also a life cycle perspective. In both cases as well as for both parameters considered, incineration was found to be superior to landfilling. However, the performance of incineration was much better when a life cycle perspective was used. Also, landfilling reversed to be superior to incineration when methane recovery and electricity production were introduced. This study reveals that a complete picture of the environmental performance of MSW management systems is provided by using a life cycle perspective.     

Environmental impact minimization of a total wastewater treatment network system from a life cycle perspective

Synthesis of distributed wastewater treatment plants (WTPs) has focused on cost reduction, but never on the reduction of environmental impacts. A mathematical optimization model was developed in this study to synthesize existing distributed and terminal WTPs into an environmentally friendly total wastewater treatment network system (TWTNS) from a life cycle perspective. Life cycle assessment (LCA) was performed to evaluate the environmental impacts of principal contributors in a TWTNS. The LCA results were integrated into the objective function of the model. The mass balances were formulated from the superstructure model, and the constraints were formulated to reflect real wastewater treatment situations in industrial plants. A case study validated the model and demonstrated the effect of the objective function on the configuration and environmental performance of a TWTNS. This model can be used to minimize environmental impacts of a TWTNS in retrofitting existing WTPs in line with cleaner production and sustainable development.     

Limitations of applying life cycle assessment to complex co-product systems: The case of an integrated precious metals smelter-refinery

Integrated smelter-refineries play an important role in the recovery of multiple metals from complex primary and secondary materials, and hence in closing metals cycles. Processes in these facilities are strongly interconnected, dynamic, and multifunctional, which challenges a typical representation in life cycle assessment (LCA). This is especially true when LCA is applied to calculate the environmental profile of single metals products.This study examines methodological requirements for assessing complex co-product systems using attributional LCA through a static, gate-to-gate inventory model that quantifies the environmental impacts of each of the metal products of an integrated precious metals smelter-refinery. The model is based on a large number of subprocesses and is formulated using detailed industry data, which allows quantification of the sensitivity of the results with respect to allocation rationales and the data collection period.The results within one impact category vary strongly among metals (up to four orders of magnitude for copper compared to rhodium). Moving from mass- to value-based allocation changes the result for a given metal by up to two orders of magnitude. If value-based allocation is used, the selected reference year for metals prices influences the results by up to a factor of two.Allocation rationales are critically analyzed, and it is shown that none reflect the business model or other system drivers. While the model is focused on quantifying environmental impacts of metal outputs, the actual process is economically driven to efficiently treat a continuously changing feed mix. The complexity of a smelter-refinery cannot be captured by static, attributional inventory models, which is why the choice of allocation rationale remains arbitrary. Instead, marginal, parameterized models are needed; however, such models are substantially more time and data intensive and require disclosure of more detailed, process specific data.     

Monitoring and environmental modeling of earthwork impacts: A road construction case study

This study presents the contributions of materials, earth engineering machines and construction techniques to potential environmental impacts from the main items of typical road earthworks. To achieve this goal, the overall activity at a 1.9-km long French earthworks project site for a heavily trafficked highway was surveyed during its 2007–2009 construction period. Using data collected and a numerical model of road life cycle assessment (LCA), i.e. ECORCE, six indicators could be evaluated, namely: energy consumption, global warming potential, acidification, eutrophication, photochemical ozone creation, and human chronic toxicity. When available, several life cycle inventories were implemented in order to appraise indicator sensitivity with respect to the considered panel of pollutants. Results also allowed estimating from an LCA point of view: (i) the conservation of both aggregates and soil as induced by quicklime treatment and (ii) the duration necessary for projected traffic levels to offset the potential environmental impacts of the earthworks stage.     

Analysis of energy security and sustainability in future low carbon scenarios for Brazil

This study estimated a series of indicators to assess the energy security of supply and global and local environmental impacts under different mitigation scenarios through 2050 in Brazil, designed with the integrated optimization energy system model MESSAGE‐BRAZIL. The assessment of interactions between environmental impacts and energy security dimensions was complemented through the application of life cycle assessment (LCA) methodology. Overall results imply energy security establishes more synergies than trade‐offs in increasingly stringent mitigation scenarios, especially patent within the sustainability dimension, which increases energy security and provides additional benefits regarding climate change mitigation and air pollution emissions. It is still necessary to extend analysis to other energy sectors in addition to the power supply sector and to promote a better understanding of repercussions of energy scenario expansion in energy security.     

The joint use of LCA and emergy evaluation for the analysis of two Italian wine farms

The aim of this paper is to evaluate two agroindustrial productive processes in their entirety (one organic and one semi-industrial), focusing on the comparison of impacts derived from the inputs and outputs of the system (life cycle assessment, LCA), integrated with a physical evaluation of the resources and natural services, on a common basis (emergy). Methods based on the joint use of LCA and emergy evaluation are useful, as they measure the contribution of environmental services and products to the productive process thus focusing primarily on the environmental impact of emissions and non-renewable energy inputs. The complementarity of the methods used in this paper contributes important elements and information useful for the comprehension of the organization of agriculture within Siena's territory. The results show important elements and useful information: (1) for the comprehension of the two agroecosystems' organization; (2) for the use of the energy flows that determine their development. Moreover, the combined use of emergy and LCA gives a comparative thermodynamic performance evaluation between organic and semi-industrial farming.     

Environmental and economic feasibility study of a total wastewater treatment network system

The synthesis of distributed wastewater treatment plants (WTPs) has been studied to reduce capital and operating costs associated with wastewater treatment. In this study, the environmental and economic feasibility of a total wastewater treatment network system (TWTNS) including distributed and terminal WTPs was estimated using life cycle assessment (LCA) and life cycle costing (LCC) methods. Wastewater sources and existing distributed and terminal WTPs in an iron and steel plant were networked. The TWTNS was generated from the optimal solution to a mathematical optimization model and compared to a conventional wastewater treatment system (CWTS). The environmental effect scores of the TWTNS were from 29.6% to 68.3% higher than those of the CWTS because of higher electricity consumption required to pump wastewater to the networked WTPs. However, the life cycle cost of the TWTNS was lower than that of the CWTS by 10.1% because of the decrease of the labor cost resulting from the closing of three distributed WTPs. Overall, the TWTNS was no more eco-efficient than the CWTS because the increase of environmental burdens outweighed the decrease of economic costs.     

棉织品的生命周期评价

生命周期评价（LCA）是ISO14000管理体系的重要组成部分，本文将棉捉品生命周期的四个阶段对环境的影响分别进行了评估，并将结果汇总计算，比较分析了在棉织品生命周期中，对环境影响最大的阶段，从而为棉织品的生态设计提供了依据。     

On process optimization considering LCA methodology

The goal of this work is to research the state-of-the-art in process optimization techniques and tools based on LCA, focused in the process engineering field. A collection of methods, approaches, applications, specific software packages, and insights regarding experiences and progress made in applying the LCA methodology coupled to optimization frameworks is provided, and general trends are identified. The "cradle-to-gate" concept to define the system boundaries is the most used approach in practice, instead of the "cradle-to-grave" approach. Normally, the relationship between inventory data and impact category indicators is linearly expressed by the characterization factors; then, synergic effects of the contaminants are neglected. Among the LCIA methods, the eco-indicator 99, which is based on the endpoint category and the panel method, is the most used in practice. A single environmental impact function, resulting from the aggregation of environmental impacts, is formulated as the environmental objective in most analyzed cases. SimaPro is the most used software for LCA applications in literature analyzed. The multi-objective optimization is the most used approach for dealing with this kind of problems, where the ε-constraint method for generating the Pareto set is the most applied technique. However, a renewed interest in formulating a single economic objective function in optimization frameworks can be observed, favored by the development of life cycle cost software and progress made in assessing costs of environmental externalities. Finally, a trend to deal with multi-period scenarios into integrated LCA-optimization frameworks can be distinguished providing more accurate results upon data availability.