污泥厌氧消化预处理技术综述

全球环境问题已成为国际社会关注的焦点,围绕全球气候变化,降低温室气体排放,寻求再生能源,节能减排已成为目前国际科技发展的方向。通过"十一五"污水处理厂的建设,每年污泥产量已接近3000万吨(含水率80%脱水污泥计)以上,且以每年10%的速度递增。其处理与处置是制约社会经济发展的重要问题。但是,城市污泥蕴含有大量生物质能,通过借鉴国外先进技术与经验,开发城市污泥生物质能提取和利用技术,对我国节能减排具有重要战略意义。由于细胞壁的存在,使得污泥水解成为限制厌氧消化效率的重要瓶颈,而污泥强化预处理可有效提高污泥细胞壁的破坏,溶出胞内有机物,最大化回收剩余污泥中的有机能源。目前,预处理技术较多,如超声波预处理、热处理、微波预处理、碱解处理、臭氧预处理等,本文从物理、化学等角度分析了不同预处理对厌氧消化技术的影响。     

超声波强化酶法提取污泥蛋白研究

以城市污水处理厂剩余污泥为试验对象,对超声波预处理强化中性蛋白酶提取污泥蛋白质的效果和工艺条件进行了研究。结果表明,经超声波预处理后,污泥酶解蛋白提取率可提高40%左右,污泥脱水性能也提高了80%以上。响应面分析表明,超声强化酶解污泥提取蛋白的优化工艺条件为:p H=7.4、酶加量4 500U/g、酶解时间4h、酶解温度48℃,此时最佳蛋白提取率可达35.9%。     

低温热水解提高污泥厌氧消化性能的研究

先将剩余污泥进行低温热水解预处理,其后测定生物化学甲烷势(BMP)来研究热水解对剩余污泥厌氧消化性能的影响。结果表明:污水厂剩余污泥经低温热水解处理可使污泥固体溶解和水解,从而提高剩余污泥厌氧消化性能。最适宜的热水解条件为70℃,24 h,此时剩余污泥TCOD去除率由18%提高到30%,热水解处理后沼气产量提高63%。     

碱解处理对剩余污泥融胞效果及厌氧消化产气效果

主要研究了碱解处理的pH值对剩余污泥的融胞效果及厌氧消化产气效果的影响.通过观测碱处理污泥上清液中的SCOD以及溶解性蛋白质,发现两者变化规律相似,其融胞效果随pH值的升高,即碱投加量的增加而增加.此外随着pH值的升高,VS的去除率随之增加.当pH为11时,48h VS去除率可达将近22%.碱解处理后污泥的后续厌氧消化的特性可得到明显改善.碱解处理调节pH值分别为pH9、pH10、pH11的污泥进行厌氧消化30d总甲烷产量与未经碱解处理的污泥相比较,总甲烷产量分别提高了8%、23%、41%.其中经碱解处理至pH值为11的污泥的COD去除率为32%.     

水热处理温度对污泥中碳、氮、磷溶出的影响

为了提高污泥中有机物和无机物的溶出率,改善污泥的厌氧消化效果,研究了水热温度对污泥中碳、氮、磷溶出的影响。结果表明:水热预处理加速了污泥固体有机物的溶出和水解,提高了污泥中碳、氮、磷的溶出效率。在水热温度为200℃的条件下,可溶性化学需氧量(SCOD)提高了168.76%,氨氮和总氮达到最大溶出率。污泥经过厌氧消化后,污泥中磷酸根和总磷的含量明显降低。     

稠油区块含油污泥化学清洗方法研究

以稠油区块含油污泥为研究对象,确定了一种化学清洗方法,使稠油含油污泥清洗后油类含量≤2%。研究了化学清洗过程中固液比、搅拌速度、搅拌时间、加热温度等工艺技术参数对化学清洗效果的影响。通过化学清洗性能评价表明,采用两段化学清洗对稠油含油污泥中油类组分清洗效果最优,其中第一段清洗最优参数为实验温度80℃;固液比1∶4;药剂投加量为SH3.2%,SC 0.8%;搅拌速度250 r/min;搅拌时间30 min。第二段清洗最优参数为实验温度60℃;固液比1∶4,;药剂投加量为EP1.0%,三乙醇胺油酸皂1.0%,SE 1.5%;搅拌速度150 r/min;搅拌时间90 min。     

微生物处理含油污泥工艺研究

文章研究了一种新型的微生物处理工艺及微生物热通风法处理含油污泥。选择已有的强化微生物复合菌种,以姬塬油田落地含油污泥为研究对象,实验室找到微生物处理含油污泥的合理温度及湿度;在现场通过预埋管路给含油污泥进行加湿、加热,人工给予最适条件,经过两个月的处理,使含油污泥含油率由12.0%下降到0.27%,达到GB 4284—84《农用污泥中污染物控制标准》要求。     

含油污泥物化法处理研究进展

含油污泥是石油开采及加工过程中产生的含油量高、脱水难、水溶性小的固体废物。文章主要介绍了国内物化技术处理含油污泥研究的现状及进展,包括洗脱、萃取、调质分离、热洗、调剖等。对这些方法进行了评价和比较,并对今后的研究方向提出建议,需要在微波、超声波和调剖剂上作进一步研究。     

热化学洗涤－超声波分离技术处理油田含油污泥

为解决大量堆存的含油污泥所造成的环保隐患问题,长庆油田建设了含油污泥处理站。采用"热化学洗涤-超声波分离"工艺对含油污泥进行处理。含油污泥的含油率从处理前的48.9%降到处理后2.0%,除油率达到95.9%,除油效果较好。     

实现污泥深度脱水和重金属去除的生物沥浸处理技术

阐述了生物沥浸处理技术的基本原理、工艺流程及主要技术特点,通过典型应用工程实例表明,采用生物沥浸预处理方法不但可大幅度提高污泥脱水性能,而且可去除污泥中的重金属、恶臭,杀灭病原物,脱水后的污泥水分含量很低(60%以下),无臭、卫生、无害,可广泛应用于城镇污水处理厂及工业行业的污泥处理,市场前景十分广阔。     

基于微波热解技术的竹炭、竹醋生产设备研究

基于现有竹炭、竹醋生产工艺流程及工业技术水平,设计了一套具有创新性的竹炭、竹醋生产设备,并给出了设备完整的结构以及包括微波源功率在内的关键制造参数.该设备首次引入微波热解技术代替传统的燃烧加热方法,同时窑炉整体设计遵循节约生产空间、原料充分转化、废气废渣循环处理、热量多级利用、全封闭式生产、自动化控制等节能、环保、高效的思想.此外,在对微波源的设计上依据多源溃能理论,采用以小功率磁控管组合代替大功率磁控管设计,从而大幅降低设备的制造成本,提高微波源的使用寿命及工作稳定性.     

Improving anaerobic sewage sludge digestion by implementation of a hyper-thermophilic prehydrolysis step

The present study focuses on a two-step process for treatment and stabilisation of primary sludge. The process consists of a hyper-thermophilic hydrolysis step operated at 70 degrees C and a hydraulic retention time (HRT) of 2 days followed by a thermophilic (55 degrees C) anaerobic digestion step at a HRT of 13 days. A one-step anaerobic digester operated at 55 degrees C and 15 days HRT was used as a reference process. The two-step process was characterized by a 12% higher organic suspended solids removal efficiency and better pathogen reduction effect than the conventional one-step digestion. The microbial community of the digester fed with pre-treated sludge was characterised by a higher activity compared to that of the digester treating raw sludge. Moreover, the pre-treatment of the primary sludge resulted up to 48% increase of the methane potential (20.09 and 13.56mmolCH(4)g(-)VS(-1) with and without pre-treatment, respectively) and up to 115% increase of the methane production rate. Finally it was shown that the extra energy requirements for the operation of a pre-treatment step would be covered by the energy produced from the extra methane production and in addition there would be a significant energy surplus of 2.17kJd(-1) for the system tested.     

用微波消解-光度法测定废钻井液中的总铬

采用微波消解-光度法处理钻井液废水中的总铬。该方法克服了常规消解方法的缺点,测定步骤简单、快速,准确性高。通过实验探讨了微波功率、加热时间、样品体积对样品消解的影响。与常压的硫酸-硝酸消解法进行比较的结果表明,用微波消解-光度法处理泥浆废水可将消解时间由原来的6h缩短为20min,加标回收率由60%提高到92%,降低了工作强度,改善了工作环境。     

Microwave-assisted stripping of oil contaminated drill cuttings

The application of microwave heating technology to conventional gas stripping processes has been investigated in the remediation of contaminated drill cuttings. The technical feasibility and limitations of nitrogen and steam stripping processes are demonstrated, and it is shown that the combination of microwave heating with the stripping process offers a step change in performance. Order of magnitude improvements in processing time are shown for the microwave-assisted processes, as well as greatly improved levels of remediation. The mechanisms of contaminant removal are discussed, along with the phenomena which occur with microwave heating processes. The energy requirements of each of pure gas and microwave-assisted processes are also discussed, and the potential applications of each technology are highlighted relative to the overall remediation requirements.     

A comparison of pretreatments on release of sugars from sweet sorghum bagasse for bioethanol production

Dilute acid pretreatment and steam pretreatment were evaluated for maximum sugars release and ethanol production from sweet sorghum bagasse (SSB). The fermentation potential of the condensate and hydrolysate obtained from steam pretreatment (10 kg/cm², 10 minutes) and dilute acid hydrolysis (1% (w/w) sulphuric acid, 25% substrate loading) respectively, was checked with Pichia stipitis NCIM 3497 and Debaryomyces hansenii sp. Ethanol production and yield using acid hydrolysate was higher with Debaryomyces hansenii sp. (28.4 g/L and 0.37 g/g respectively) as compared with Pichia stipitis NCIM 3497 (21.9 g/L and 0.29 g/g respectively).     

碱法草浆造纸黑液厌氧生物降解研究

采用中温(34±2℃)全混合式厌氧反应器处理蒽酸和硫化烧碱草浆造纸黑液。对比厌氧发酵结合物化前或后处理两种方法进行试验,厌氧生物降解COD_(er)去除率分别为61.2～75.3％和34.9～46.2％,COD_(er)总去除率分别为80.0～87.6％和68.4～75.8％。在厌氧发酵稳态运行条件下,对发酵污泥中主要微生物类群和数量进行了研究。     

The influence of dilute sulfuric acid pretreatment on biogas production from wheat plant

Dilute sulfuric acid pretreatment was used to improve the biomethane production from wheat plant (WP) via mesophilic anaerobic digestion. The pretreatments were performed at 121°C for different time durations of 10, 30, 60, and 120 min. The maximum methane yield of 302.4 mL/g volatile solids (VS) was obtained after the pretreatment for 120 min, which was 15.5% higher than that of the untreated WP. The highest amounts of lignin removal (15.2%) and xylan degradation (91.5%) were also achieved after this pretreatment. The pretreatment for 60 min enhanced the methane yield by 8.9%, while the pretreatments for 10 and 30 min had no positive effects on the methane yield. All of the pretreatments significantly removed the hemicelluloses. Moreover, the qualitative analysis of the untreated and pretreated WP structure showed significant reduction in the crystallinity index accompanied by the destruction of surface layers of WP structure after pretreatment.     

CAST工艺脱氮的研究

在CAST工艺中，通过控制活性污泥工艺的反应环境可以使氮的去除过程优化。将传统的处理方法和周期循环运行过程的处理效果做长时间的比较，通过检测比较硝化速率，同时硝化反硝化以及除磷效果，可知，当运行负荷相同时，周期循环运行过程是一种很有优势的污水处理方法。     

超声-生化法降解8-羟基喹啉废水的实验研究

本文采用超声-生化(两级好氧)联用的方法,对8-羟基喹啉废水的降解工艺进行了研究。对废水的预处理方法为超声降解法,文中分析了溶液初始浓度、超声时间、超声全程时间以及超声细胞粉碎机的变幅杆直径大小对废水预处理效果的影响。实验结果表明,变幅杆直径为25mm,溶液初始浓度为0.6g/L,超声全程时间在20min,最佳超声时间为2s时降解效率最高,CODcr去除率可以达到40.4%。本实验生化处理方法为普通活性污泥法(两级好氧),一级好氧反应池停留时间选择10h,去除率为69.4%;二级好氧反应池停留时间选择6h,去除率为71.7%。超声-生化(两级好氧)联用对8-羟基喹啉废水处理效果良好,CODcr总去除率达到94.4%。