污泥膜覆盖好氧发酵堆体流场模拟及应用研究简

运用Gambit软件建立了污泥好氧发酵堆体的多孔介质模型,通过自行设计的实验装置获得了堆体的通风粘性阻力系数和惯性阻力系数以及功能膜压差与透气量之间的关系,用Fluent软件分析了堆体不同截面形状及底部通风管数量对堆体通风均匀性的影响,为确定合理的通风管数量及截面几何形状提供理论依据。对上海奉贤区城镇污水厂污泥处理工程发酵仓进行堆体流场模拟,确定堆体采用小拱形截面形状,堆高2 m,宽8 m,底部设置4条通风管,实际运行效果良好。     

电除尘器进口矩形烟道气流分布改进的CFD模拟

应用CFD软件对某电厂电除尘器进口矩形烟道内气流分布进行数值模拟.结果表明:电除尘器原进口矩形烟道监测截面的气流分布极其不均匀,数值模拟结果与实验结果速度分布趋势比较吻合.基于此,通过多次改变电除尘器进口矩形烟道内导流板的数量、位置、尺寸等结构参数,使得改造后烟道监测截面风量偏差降到了±2.2%,气流分布相对均方根值均...     

饮食业油烟道火灾的模糊事件树分析

对饮食业油烟道火灾事故进行事件树分析时,历史数据的缺乏常常导致无法进行事件序列的定量计算.针对这一问题,利用专家对事故的模糊评判,引入模糊事件树进行定量计算研究.在模糊集理论的基础上,结合德尔菲法和判断矩阵法, 将模糊性语言转换为三角模糊数或梯形模糊数,应用模糊数截集以及模糊数清晰化方法,对后果事件发生概率进行计算.研究表明,饮食业油烟道火灾事故概率的模糊事件树分析是切实可行的,有助对饮食业油烟道火灾的认识、预防和扑救工作.     

丰镇发电厂送风系统噪声原因分析及降噪研究

振动和噪声普遍存在于火电厂锅炉送风系统中 ,是电厂噪声污染的一个重要来源 ,严重影响电厂安全、经济、文明运行。有效地降低送风系统的振动和噪声是火电厂急需解决的问题。笔者针对丰镇火电厂送风系统结构和运行参数 ,对由此产生的噪声进行了细致的测量 ,分析了产生振动和噪声的原因 ,认为送风机蜗舌处产生的气动噪声和管道二次涡流是引发送风系统振动和噪声的主要原因。根据产生振动和噪声的原因 ,并结合电厂要求 ,进行了技术改造即在直管中安装栅格网及弯管处安装导流栅以消除局部涡流。技术改造方案实施后经测量的结果表明 ,冷风道的噪声下降了 7～ 1 6dB ,明显降低了送风系统的振动和噪声。     

Duct-venting of dust explosions in a 20 L sphere at elevated static activation overpressures

Ducts are often recommended in the design of dust explosion venting in order to discharge materials to safe locations. However, the maximum reduced overpressure increases in a duct-vented vessel rather than in a simply vented vessel. This needs to be studied further for understanding the duct-venting mechanism. Numerous duct-vented dust explosion experiments were conducted, using a 20 L spherical chamber at elevated static activation overpressures, ranging from 1.8 bar to 6 bar. Duct diameters of 15 mm and 28 mm, and duct lengths of 0 m (simply venting), 1 m and 2 m, were selected. Explosion pressures both in the vessel and in the duct were recorded by pressure sensors, with a frequency of 5 kHz. Flame signals in the duct were also obtained by phototransistors. Results indicate that the secondary explosion occurring in the duct increases the maximum reduced overpressure in the vessel. The secondary explosion is greatly affected by the duct diameter and static activation overpressure, and hence influences the amplification of the maximum reduced overpressure. Larger static activation overpressure decreases the severity of the secondary explosion, and hence decreases the increment in the maximum reduced overpressure. The secondary pressure peak is more obvious as the pressure accumulation is easier in a duct with a smaller diameter. However, the increment of the maximum reduced overpressure is smaller because blockage effect, flame front distortion, and turbulent mixing due to secondary explosion are weaker in a narrow duct. The influence of duct length on the maximum reduced overpressure is small at elevated static activation overpressures, ranging from 1.8 bar to 6 bar at 15 mm and 28 mm duct diameters.     

煤巷掘进过程中粉尘浓度影响因素分析

为了掌握煤巷掘进过程中粉尘浓度变化的影响因素,根据气固两相流理论,针对矿井掘进工作面的特点,采用计算流体力学的离散相模型（DPM）考察了掘进巷道风速、风筒直径、风筒出风口到掘进工作面距离以及风筒的悬挂高度对粉尘浓度变化的影响。结果发现：当掘进巷道风速为0.25-4 m/s时,提高巷道内的通风风速,可以降低巷道内的粉尘浓度,缩短呼吸性粉尘浓度达到稳定的时间,减小工作面粉尘的危害;有利于通风除尘的风筒相关参数为风筒直径0.4-0.6 m、风筒出风口到掘进工作面距离6-7 m、风筒悬挂高度2.0-2.2 m。     

含复杂管路的某机构模态参数识别研究

目的获取复杂结构产品的模态参数及动态性能。方法采用基于冲击激励的试件自由模态分析试验,综合分析频响函数曲线幅值,确定局部结构模态频率点,利用半功率带宽法和专用分析软件分别计算模态阻尼比和模态振型。结果识别出影响某机构动态性能关键部件的模态参数。结论发现机构外壳模态频率远离冷却装置频率点,冷却管一阶横向模态由自身结构特性产生,二阶及纵向模态由减压阀模态引起。气体导管的动态特性主要受冷却装置模态的影响。     

Suppression of flame propagation in a long duct by inertia isolation with inert gases

Experimental studies were done with a small pipe with a diameter of 0.043 m and a large pipe with a diameter of 0.49 m to demonstrate the flame propagation suppression with inertia isolation in a long duct. Tests were carried in an ignition section containing propylene/air mixture near stoichiometric concentration and generating a peak flame propagation speed of approximately 100 m/s. The ignition section is connected to a section filled with an inert gas, another section with flammable mixtures, and finally a sufficiently long, ambient section to accommodate flame propagation. The critical length of the inert gas section required for successful suppression of flame from the igniting the flammable section is found to be 0.6 m for CO₂ and 0.9 m for N₂ in the large pipe and 0.2 m for CO₂ and 0.3 m for N₂ in the small pipe. Additional tests with a 3 m of ignition section and peak flame propagation speed of 225 m/s showed that the critical length for successful suppression by CO₂ is only increased slightly to 0.9 m, confirming that the suppression is a result of inertia isolation rather than inert gas dilution. Finally, application of the results in responding to large-scale leak into a long, underground duct is discussed.     

泄爆导管对球形容器内气体爆炸泄放过程影响的试验

设计了球形容器内气体爆炸通过导管泄爆的试验系统,选用体积分数为10%(特殊说明除外)的甲烷和空气预混气体开展试验,研究了泄爆导管长度、容器容积、点火位置、气体体积分数、破膜压力等因素的影响。结果表明:泄爆导管越长,容器内的正压力峰值和负压力峰值越大;密闭爆炸时,球形容器的容积对爆炸压力峰值几乎无影响;不同容积球形容器内气体爆炸通过相同导管泄爆时(导管长度均为6 m,直径均为0.06 m),容积大的容器内的压力锋值为小容器压力值的3.3倍,且大容器内的压力上升速率也明显高于密闭爆炸的情况;有泄爆导管存在时,尾部点火容器内的压力峰值高于中心点火;泄爆导管的存在使得容器内的压力峰值高于直接泄爆时的压力峰值;无论有、无泄爆导管,容器内的压力峰值均随破膜压力增加而增加,但差值越来越小,说明导管的存在对容器爆炸泄爆过程的影响趋向缓和,但导管的存在总是阻碍了泄爆过程,增加了爆炸的严重程度,因此,在泄爆设计时要充分考虑导管的影响,适当提高容器自身的耐压强度。     

移动Ad hoc网络路由协议的安全性分析与对策

移动Ad hoc网络是一种自组织、多跳的无线网络,由于其独特性能使移动Adhoc网络面临着比现有网络具有更大的安全挑战,其中路由安全对该网络的安全性起着关键性的作用。在介绍移动Ad hoc网络主要路由协议及其特点的基础上,笔者深入研究了移动Ad hoc网络路由协议中存在的黑洞、拒绝服务等安全漏洞;详细分析了几种主要的Ad hoc路由协议的安全性增强方案;根据不同路由协议的特点,分别提出了利用单向散列链改进距离矢量路由协议安全性的两种方案;分析了一种用于改善源路由协议安全性的方案的可行性。最后,指出了移动Ad hoc网络路由协议安全性问题的进一步改进和研究方向。