Al_2O_3光催化降解染料性能研究

液相加热法制备了Al2O3作为光催化剂,研究了不同光源、光照时间、催化剂用量和溶液酸度等条件对常见有机染料光催化降解性能影响。结果表明,用太阳光作为光源照射3h,50mL染料溶液中加入Al2O3 30mg,溶液pH8～10,孔雀石绿,酚藏花红,甲基紫等染料脱色率达93%以上。将使用过的Al2O3经过简单处理,孔雀石绿溶液脱色率仍达到94.1%,催化性能稳定,可以重复利用。通过紫外可见光谱分析,表明染料分子在催化剂和光照条件下发生了降解。     

Production of laccase by Coriolus versicolor and its application in decolorization of dyestuffs: (Ⅱ) Decolorization of dyes by laccase containing fermentation broth with or without self-immobilized mycelia

The capability of decolorization for commercial dyes by Coriolus versicolur fermentation broth containing laccase with or without immobilized mycelium was evaluated.With cell-free fermentation broth containing laccase,high decolorization ratio was achieved for acid orange 7,but not for the other dyes concerned.The immobilized mycelium was proved to be more efficient than the cell-free system.All the four dyestuffs studied were found being decolourized with certain extent by immobilized mycelium.The repeated-batch decolorization was carried out with satisfactory results.The experimental data showed that the continuous decolorization of wastewater from a printing and dyeing industry was possible by using self-immobilized C.Versicolor.     

Production of laccase by Coriolus versicolor and its application in decolorization of dyestuffs : (Ⅰ) Production of laccase by batch and repeated-batch processes

The production of laccase by Coriolus versicolor was studied.The effect of cultivation on laccase production by Coriolus versicolor was examined to obtain optimal medium and cultivation conditions.Both batch and repeated-batch processes were performed for laccase production.In repeated-batch fermentation with self-immobilized mycelia, total of 14 cycles were performed with laccase activity in the range between 3.4 and 14.8U/ml.     

Ag-AgI/CN/MA复合物的制备及其可见光催化性能

采用沉淀法和热聚合法分别将AgI、氮化碳(CN)负载在介孔γ-Al_2O_3(MA)上,并通过光还原银离子成功制备了等离子体诱导可见光催化剂Ag-AgI/CN/MA.利用X射线衍射(XRD)、X射线光电子能谱(XPS)、场发射扫描电子显微镜(FESEM)、紫外可见漫反射光谱(UV-vis DRS)和透射电子显微镜(TEM)对Ag-AgI/CN/MA复合材料进行表征,并对其在可见光照射下(λ420 nm)的光催化性能进行了研究,考察了初始溶液pH值及催化剂投加量等条件对光催化反应的影响.结果表明,表面银以Ag+和Ag0形式共存,并且Ag和AgI均匀地分散在CN的表面.与CN和Ag-AgI/MA相比,Ag-AgI/CN/MA复合物对甲基橙(MO)具有更高的可见光催化降解效率,且反应过程中Ag+的释放量显著减少,显示出良好的稳定性.当溶液pH值为7、催化剂投加量为1 g·L~(-1)时,Ag-AgI/CN/MA-2显示出最优的催化性能.同时,其对罗丹明B(Rh B)、甲基红(MR)和刚果红(CR)等不同电性的染料均体现出良好的催化性能.     

粉煤灰对混合染料的吸附性能研究

以燃煤废弃物粉煤灰作为吸附剂,对活性红23和分散蓝56混合染料溶液进行吸附性能研究.实验结果表明:粉煤灰优先吸附离子型的活性染料,混合溶液中对活性红23的吸附能够在30 min达到平衡,而对分散蓝56的吸附则需要150 min才能够达到平衡,吸附动力学符合准二级吸附模型.在弱酸性环境中粉煤灰对分散染料的脱色高于碱性环境...     

玻璃弹簧负载镶嵌纳米粒子TiO2膜光催化降解活性深蓝K-R

以玻璃弹簧负载镶嵌纳米粒子的TiO2膜降解活性深蓝K-R模拟废水,考察了pH值和温度对脱色率的影响以及CODCr去除率与脱色率之间的关系,并用XRD和SEM对催化剂进行了表征.结果表明,pH值和温度对脱色率均有显著影响,CODCr去除率与脱色率的比值约为70%左右;XRD表明,TiO2矿相主要为锐钛型,SEM表明,镶嵌TiO2粒子均匀,粒径约50nm.     

罗丹明染料荧光猝灭法分别测定痕量二氧化氯和亚氯酸根

在碱性条件下,ClO2氧化罗丹明染料发生荧光猝灭可选择性地测定ClO2的含量,而ClO2-不干扰测定;在酸性条件下可测量ClO2与ClO2-共同产生的荧光猝灭强度,利用差减法可求出ClO2-的含量.对于罗丹明S,罗丹明G,罗丹明B及丁基罗丹明B四体系,ClO2浓度分别在0.00840-0.53μg·ml-1,0.0930-3.15μg·ml-1,0.215-2.610μg·ml-1及0.0825-1.096μg·ml-1范围内,与四体系的荧光猝灭强度呈线性关系;亚氯酸根浓度分别在0.00950-0.711μg·ml-1,0.0940-2.36μg·ml-1,0.473-4.73μg·ml-1及0.473-2.36μg·ml-1范围内,与四体系的荧光猝灭强度呈线性关系.另外,选择罗丹明S荧光猝灭法分别测定了饮用水中ClO2及ClO2-,获得了满意的结果.     

七种染料对鲤鱼肝微粒体芳烃羟化酶的诱导

以鲤鱼肝微粒体为实验体系,研究了七种染料化合物对其芳烃羟化酶（AHH）的诱导,发现七种染料都可诱导AHH的活性,随染料浓度增大AHH的活性升高。七种染料对AHH活性诱导能力大小为：酸性红B＞派拉丁蓝RRN＞普拉红B＞活性艳红K－2BP＞活性艳红K－2G,媒介大红S－80＞分散红E－4B,与其毒性大小相关。     

二氧化氯对有机染料脱色效果的研究

本文对二氧化氯二两种直接染料和两种活性染料脱色效果的影响因素－ClO2的投加量、染料的初始浓度、pH值、温度以及反应时间等进行了研究。结果表明,在适当的条件下,二氧化氯对这几种有机染料均具有很好的脱色效果。