CFB锅炉燃烧高硫石油焦的灰渣综合利用研究

循环流化床锅炉在燃烧含硫石油焦时,通过加入石灰石在燃烧的过程中以固态的形式脱硫,燃烧后将产生大量的灰渣,过去处理灰渣最通常的方式是作土地填埋。从灰渣的化学、物理特性试验研究出发,寻找循环流化床灰渣在建筑材料、农业应用和水泥添加剂方面的利用途径,研究了更加经济有效的灰渣处理方法。     

活性炭厌氧流化床处理毒性有机废水存在的问题与对策

活性炭厌氧流不处理毒性有机废水存在问题，对含有活性炭能吸附而生物难降解成份的废水，通过定期替换少量活性炭、能维持工艺的稳定运行。     

层燃—流化床焚烧城市垃圾技术

首次提出的层燃－流化床燃烧技术是适合我国国情的城市垃圾处理技术，可使预处理过程达到最简化并保证燃烧过程的稳定必和彻底性，给出了层燃－流化床双床焚烧炉的结构和工作原理。     

火电厂石灰石湿法烟气脱硫废水处理方法

阐述了石灰石湿法烟气脱硫（FGD）废水的水质特征，介绍了国内外普遍应用的化学沉淀去除脱硫废水中重金属、悬浮物等物质的工艺特点及其不足，并着重介绍了最新发展的流化床法、沉淀一微滤法等FCD废水处理新型工艺。     

好氧锥形流化床生物膜反应器启动与生物膜形成特征研究

对好氧锥形流化床膜生物反应器（A-TFBBR）的启动特征、生物膜行为、特征和结构进行了详细的探讨,并与相近启动条件下的传统柱状流化床生物膜反应器（A-CFBBR）的启动行为进行比较.结果表明,自然培养生物种源的方法与传统的以活性污泥做种源的方法相比节省了生物驯化和淘汰的时间,在短时间内就完成了生物反应器的启动（柱状床11 d,锥形床16 d）,而一般以活性污泥为种源则大都需要100～300 d的启动时间.另外,采用这种方法在A-TFBBR反应器和A-CFBBR反应器中获得的生物膜厚度分别仅为(32±1) μm 和(24±2) μm,低于大部分报道的生物膜厚度.2个生物反应器都表现出理想的COD去除能力,其中A-TFBBR反应器对COD的去除率高达95%以上,比A-CFBBR对COD的去除率平均高出15%.     

废轮胎流化床气化特性试验研究

为了掌握废轮胎在流化床内的气化特性,利用自行设计的小型流化床试验装置系统,对废轮胎在不同的过量空气系数下在400～700℃温度范围内进行了空气气化实验.分析了废轮胎气化效率、固定碳转化率、气化气热值、产气量以及气化气成分随气化温度、过量空气系数的变化规律.结果表明,废轮胎气化的最佳运行条件为气化初始温度700℃,过量空气系数α=0.4.在此条件下得到的气化气成分主要包括CH₄、CO、H₂、C₂H₆和高分子有机化合物,此时的气化效率为47.96%,气化气低位热值为4 804kJ/m³.     

Analysis of gas flow behavior in an annular fluidized-bed reactor for polystyrene waste treatment

The characteristics of bubble properties and the chaotic flow behavior of gas were investigated in an annular fluidized bed (0.102 m in inner diameter and 2 m in height) because the behavior of gas flow in such a reactor is one of the important factors governing reactor operation, reactor performance, and the reaction itself. Pressure fluctuations as a state variable for the analysis of gas flow behavior were measured and analyzed. Bubble properties were determined by adopting the cross-correlation function of pressure fluctuations. The resultant chaotic flow behavior of gas was interpreted by means of chaotic parameters such as the Kolmogorov entropy. It was found that the Kolmogorov entropy could be utilized effectively to explain the nonlinear dynamic behavior of gas-solid flow in the annular fluidized bed. The pierced length and rising velocity of bubbles increased with increasing gas velocity, bed temperature, and particle size of the bed material. The bubble frequency increased with increasing gas velocity and bed temperature, while it decreased with increasing particle size of the bed material. Correlations to predict the bubble properties in annular fluidized-bed reactors were suggested.     

Reduction of SO2 Emissions by Ammonia Gas During Staged Combustion

To reduce SO2 emissions, ammonia gas was injected into a coal-fired fluidized-bed combustor under staged commbustion condition. The combustor was 2 m high with a 30 cm static bed height and a freeboard height of 170 cm. The ammonia gas was injected at 52 cm and 65 cm above the distributor, which had a temperature of ca. 700 °C, by an uncooled stainless-steel tube injector. The experiments investigated the effects of ammonia gas injection on sulphur dioxide emissions at staged conditions, varying the: (i) excess air level, (ii) secondary air ratio, (iii) fluidizing velocity, (iv) ammonia injection position, and (v) the ammonia : sulphur dioxide molar ratio.A maximum reduction of 66% in SO2 emissions was found at 40% excess air, 65 : 35 staging, 1.5 m/s fluidizing velocity, 65 cm injection height, and an NH3 : SO2 molar ratio of 1.2. The onset of SO2 reduction occurred at an NH3 : SO2 ratio of 0.5. The fluidizing velocity, excess air, level of staging, and ammonia injection height all have a significant influence on SO2 reduction.It is difficult to determine how the SO2 reduction varies with the operating conditions when ammonia is injected in the high temperature zone of the combustor. As sulphur oxides-ammonia reactions are low temperature reactions, the findings confirm the occurrence of reactions above the freeboard or near the exit to the cyclone.     

从废FCC催化剂和废汽车尾气净化催化剂中回收稀土的研究进展

以稀土元素(简称稀土)用量较大的废FCC催化剂和废汽车尾气净化催化剂为研究对象,分析总结了两类废催化剂中稀土的成分和回收方法。从废催化剂中回收稀土普遍采用先浸出、后分离提纯的方法。浸出普遍采用无机酸(多为盐酸),分离方法包括溶剂萃取法、化学沉淀法等,最后经焙烧得到稀土氧化物。为从废催化剂中高效回收稀土,可着重考察新浸出机制的引入、分离方式的选择、分离试剂的应用,以及浸出和分离条件的优化,从而为实现工业化回收提供技术支持。     

Experimental study on MSW gasification and melting technology

In order to develop municipal solid waste (MSW) gasification and melting technology, two preliminary experiments and a principle integrated experiment were fulfilled respectively. The gasification characteristics of MSW are studied at 500-750℃ when equivalence ratio (ER) was 0.2-0.5 using a fluidized-bed gasifier. When temperature was 550-700℃ and ER was 0.2-0.4, low heat value (LHV) of syngas reaches 4000-12000 kJ/Nm3. The melting characteristics of fly ash were investigated at 1100-1460℃ using a fixed-bed furnace. It was proved that over 99.9% of dioxins could be decomposed and most heavy-metals could be solidified when temperature was 1100-1300℃. The principle integrated experiment was carried out in a fluidized-bed gasification and swirl-melting system. MSW was gasified efficiently at 550-650℃, swirl-melting furnace maintains at 1200-1300℃ stably and over 95% of fly ash could be caught by the swirl-melting furnace. The results provided much practical experience and basic data to develop MSW gasification and melting technology.