氨基淀粉絮凝剂合成工艺

以玉米淀粉为原料，以环氧氯丙烷(ECH)作交联剂，合成高交联淀粉(CS)；以HC1O4作引发剂，以ECH作醚化剂，合成中间产物3-氯-2-羟基丙烯基交联淀粉(CHCS)，在碱性条件下再与乙二胺反应，得到对重金属离子具有螯合能力的氨基淀粉(CAS)。最佳醚化条件：CS含水质量分数为7．0％，ECH与CS的摩尔比为2．5：1，HC104与CS的摩尔比为0．03：1，反应时间为8h，反应温度为95℃。以该法制得的CAS对废水中铜离子的去除能力为78．5mg／g。     

壳聚糖-丙烯酰胺-二甲基二烯丙基氯化铵三元接枝共聚物的合成及应用

在N2保护下,以硝硬驱铈铵为引发剂,将壳聚糖（CTS）、丙烯酰胺（AM）及二甲基二烯丙基氯化铵（DMDAAC）接枝共聚得到CTS-AM-DMDAAC三元接枝共聚物,考察了反应条件对接枝共聚反应的影响。实验结果表明,在反应温度50℃、反应时间5-6h,m（CTS）：m（AM）：m（DMAAAC）=1：6：0.67、c（Ce^4＋）=0.8mmol/L的最佳反应条件下,接枝共聚反应的接枝率和接枝效率分别为64%和10.5%。用傅里叶变换红外光谱仪对CTS-AM-DMDAAC进行了表征。絮凝实验结果表明：CTS-AM-DMDAAC对高岭土水样具有较强的絮凝能力,可在很宽的pH范围内使用。用CTS-AM-DMDAAC处理COD为165.5mg/L的啤酒生产废水,COD去除率达90.1%.     

改性蚁酸木质素的制备与应用

采用加拿大一枝黄花茎杆为原料提取蚁酸木质素,通过氧化或接枝复合的方法对蚁酸木质素进行改性,对改性产物进行了FTIR和SEM表征。实验结果表明：接枝复合改性产物中存在-CONH的接枝复合链,氧化改性产物基本保持了蚁酸木质素原来的吸收峰;采用接枝复合改性产物处理初始质量浓度为50 mg/L的亚甲基蓝废水,在废水pH 7、吸附时间4 h、改性产物加入量22 mg/mL的条件下,亚甲基蓝去除率为90.94%;采用氧化改性产物处理相同亚甲基蓝废水,在废水pH 10、吸附时间12 h、改性产物加入量22 mg/mL的条件下,亚甲基蓝去除率为81.93%。     

Improved performance of a biomaterial-based cation exchanger for the adsorption of uranium(VI) from water and nuclear industry wastewater

The amine-modified polyhydroxyethylmethacrylate (poly(HEMA))-grafted biomaterial (tamarind fruit shell, TFS) carrying carboxyl functional groups at the chain end (PGTFS-COOH) was prepared and used as an adsorbent for the removal of uranium(VI) from water and nuclear industry wastewater. FTIR spectral analysis revealed that U(VI) ions and PGTFS-COOH formed a chelate complex. The adsorption process was relatively fast, requiring only 120 min to attain equilibrium. The adsorption kinetic data were best described by the pseudo-second-order equation. The equilibrium adsorption data were correlated with the Sips isotherm model. The maximum U(VI) ions uptake with PGTFS-COOH was estimated to be 100.79 mg/g. The complete removal of 10 mg/L U(VI) from simulated nuclear industry wastewater was achieved by 3.5 g/L PGTFS-COOH. The reusability of the adsorbent was demonstrated over 4 cycles using NaCl (1.0 M) + HCl (0.5 M) solution mixture to de-extract the U(VI). The results show that the PGTFS-COOH tested is very promising for the recovery of U(VI) from water and wastewater.     

An overview of the latest development of microencapsulation for agricultural products

Abstract

For the production of controlled‐release agricultural formulations microencapsulation technologies are now the most used. Over the past two decades enormous progress has been made in order to develop the technologies which allow us to produce formulations tailor made to reach the target and fitting our toxicological requirements. This lecture is devoted to the definition of the criteria for selection of an active ingredient for microencapsulation and to a detailed review of the various techniques used today in commerçai microencapsulated formulations.

Resources are increasingly allocated into microencapsulation research & development by many agrochemical companies. Therefore the next 20 years should continue to yield innovative ideas including significant improvement of the physico‐chemical and toxicological properties of the actual formulations on the market. Some of this new ideas are applied by our company in order to modify or improve those properties playing the key role in the intent for targeted activity:

√ Recombination during production or upon storage.

New protective colloides

Dermal toxicity (LD 50) ‐ secondary protective colloides.

√ Release rate parameters.

Modification by the change of mobility of the active ingredient from the core (solvent or fluid type) affecting transit time and therefore LD 50 values.

√ Oral toxicity (LD 50).

Graft copolymers irreversibly adsorbed to the capsule surface.     

淀粉改性絮凝剂制备及其对污泥絮凝性能研究

利用60Co-γ辐射,以共辐照接枝技术制备出淀粉-丙烯酰胺接枝共聚物。研究了各种反应条件对丙烯酰胺(Acrylamide,AM)接枝率和单体利用率的影响规律,利用傅里叶红外光谱对接枝产物进行了表征。结果表明,其最佳合成条件为:辐射剂量15 kGy,淀粉与AM质量配比0.5∶1,阻聚剂添加量0.02%AM,单体浓度5%,产品接枝率达244%,单体利用率达171%。接枝产物通过Mannich反应阳离子化后考察其对剩余污泥絮凝性能,试验结果表明:改性絮凝剂(CSPAM)对剩余污泥的絮凝效果优于市售PAM,且CSPAM最佳用量小于PAM。     

Synthesis, Characterization, and Hydrolytic Degradation of Copolymers of 2-Methylene-1,3-dioxepane with Ethylene and with Styrene

2-Methylene-1,3-dioxepane (MDP) was copolymerized with ethylene (E) at a pressure of approximately 1000 psi and a temperature of approximately 70°C with AIBN as the free radical initiator. The copolymers obtained, poly(MDP-co-E), were characterized by elemental analysis, IR, ¹H-NMR and ¹³C-NMR spectroscopy, DSC, and GPC. The copolymers contained 2–15 mol% ester units. MDP was also copolymerized with styrene (S) at 120°C with di-t-butyl peroxide as the initiator to prepare the copolymer, poly(MDP-co-S). The number-average molecular weights of both types of copolymers were in the range of 6000 to 11,000, and the weight-average molecular weights were in the range of 9000 to 17,000. The melting temperatures of poly(MDP-co-E) decreased with increasing ester unit content in the copolymer. For the MDP-S copolymers, the glass transition temperatures decreased with increasing ester unit content. Both poly(MDP-co-E) and poly(MDP-co-S) were degraded by methanolysis, and their molecular weights decreased by the expected amounts based on the ester unit content.     

壳聚糖与AM和DMDAAC接枝共聚物合成与应用研究

采用自由基溶液聚合法,以过硫酸铵为引发体系,研究了壳聚糖与丙烯酰胺和二甲基二烯丙基氯化铵的接枝共聚反应。考察了反应时间、丙烯酰胺和二甲基二烯丙基氯化铵质量比、总单体浓度、反应温度、引发剂浓度等条件对接枝共聚反应的影响,并用红外光谱对反应产品进行了结构表征;将接枝共聚产品进行污泥脱水,试验表明该产品能显著改善污泥的沉降和脱水性能。     

三元高吸油树脂的制备及其吸油性能

采用本体聚合法,以丙烯酸丁酯(BA)、苯乙烯(St)和甲基丙烯酸十八酯(SMA)为单体,反应型低聚硅氧烷(OSS)为交联剂,偶氮二异丁腈(AIBN)为引发剂制备了三元高吸油树脂,优化了制备条件,考察了其对不同有机溶剂的吸油性能,并对其进行了表征。实验结果表明:树脂制备的优化条件为BA,St,SMA,OSS,AIBN的质量分别占单体总质量的39.60%,39.60%,20.80%,0.21%,1.50%,于55℃下反应24 h;在该优化条件下所制备的树脂对氯仿的吸油率可达80.2 g/g;树脂对氯仿和二氯甲烷的吸油率远高于其他有机溶剂。表征结果显示,树脂形成了一定的网络结构,具有较好的耐热性、耐寒性和热稳定性。     

改性淀粉絮凝剂的研制及在污水处理中的应用

微波预辐射法和化学接枝法均可合成淀粉—丙烯酰胺接枝物 ,产物可经红外光谱证明。接枝物的絮凝性能受接枝物的浓度 ,絮凝时间及溶液酸度的影响 ,且化学接枝法合成的接枝物絮凝性能优于微波预辐射法合成的接枝物。将其用作絮凝剂处理生活污水 ,二者效果均优于国产聚丙烯酰胺。