阳离子共聚物的反相悬浮聚合

采用反相悬浮聚合方法合成颗粒状的阳离子型高分子絮凝剂。选用丙烯酰胺(Am)和氯化[N,N,N-三甲基乙醇丙烯酸酯]盐(AQ)两种单体,研究反应体系的特征及影响分子量的基本因素,诸如温度、单体浓度、引发剂浓度、分散剂浓度、水相和油相的体积比(Vw/Vo)对分子量的影响。为了选择出最佳原料比,本文对两种单体的原料比进行了研究。实验中还发现亚硫酸钠是一种优良的缩短反应诱导期、加速反应进程的试剂。     

用水基表面活性剂乳液回收废白土中蜡的界面张力研究

通过测定液体与废白土粉末之间的接触角及液体与蜡之间的液液界面张力，对水基表面活性剂乳液的溶剂及配方进行了优选，得到最佳的水基面活性剂乳液的组成为：质量分数０．２％的十二烷基苯磺酸钠＋体积分数为２．５％的乙醇＋体积分数为２５％的混合烃（正己烷＋苯，等体积）＋体积分数为７２．５％的水。实验证明，用该水基表面活性剂乳液处理废白土，蜡的回收率可达８０％，同时不破坏白土的颗粒结构。     

气浮过程中的界面相互作用

首先讨论了水体颗粒物的基本性质以及气泡的形成过程，而后对气液界面上胶体颗粒的吸附进行分析。其次讨论了气浮过程中，气泡与颗粒物之间的相互作用。对气泡与颗粒物之间的碰撞进行分析。结合紊流气浮的理论与应用，在气浮过程中的界面相互作用分析的基础上。设计了一种新型集成的溶气气浮水处理工艺，即逆流共聚气浮工艺，并对其运行情况进行了研究。探讨了其中的界面相互作用对气浮效果的影响，进一步与传统工艺进行了对比。     

Synthesis and biodegradation of poly(γ-butyrolactone-co-l-lactide)

Biodegradable polyesters were synthesized by ring-opening copolymerization of -butyrolactone (BL) and its derivatives withl-lactide (LLA). Although tetraphenyl tin was the main catalyst used, other organometallic catalysts were used as well.¹H and¹³C NMR spectra showed that poly(BL-co-LLA)s were statistical and that their number-average molecular weights were as high as 7×10⁴. The maximum BL content obtained from copolymerization BL/LLA was around 17%. TheT _m andT _g values of the copolymers showed a gradual depression with an increase in BL content. NoT _m was obtained for the copolymers containing more than 13 mol% BL. The biodegradability of the copolyesters was evaluated by enzymatic hydrolysis and nonenzymatic hydrolysis tests. The enzymatic hydrolysis was carried out at 37°C for 24 h using lipases fromRhizopus arrhizus andR. delemar. Hydrolyses by both lipases showed that an increase in BL content of the copolymer resulted in enhanced biodegradability. Nonenzymatic accelerated hydrolysis of copolymers at 70°C was found to increase proportionally to their exposure time. The hydrolysis rate of these copolymers was considerably faster than that of PLLA. The higher hydrolyzability was recorded for the BL-rich copolymers. The copolymerization of -methyl--butyrolactone (MBL) or -ethyl--butyrolactone (EBL) with LLA resulted in relatively LA-rich copolymers.     

Dyes adsorption using a synthetic carboxymethyl cellulose-acrylic acid adsorbent

Removal of noxious dyes is gaining public and technological attention. Herein grafting polymerization was employed to produce a novel adsorbent using acrylic acid and carboxymethyl cellulose for dye removal. Scanning electron microscopy and Fourier-transform infrared spectroscopy verified the adsorbent formed under optimized reaction conditions. The removal ratio of adsorbent to Methyl Orange, Disperse Blue 2BLN and malachite green chloride reached to 84.2%, 79.6% and 99.9%, respectively. The greater agreement between the calculated and experimental results suggested that pseudo second-order kinetic model better represents the kinetic adsorption data. Equilibrium adsorptions of dyes were better explained by the Temkin isotherm. The results implied that this new cellulose-based absorbent had the universaiity for removal of dyes through the chemical adsorption mechanism.     

膜污染层微生物与聚丙烯微滤膜间的界面作用及其吸附特征

采用热力学方法及界面吸附理论,对2株膜污染层微生物(Aeromonas veronii M4、Aeromonas caviae N25)与聚丙烯(PP)微滤膜间的界面作用及吸附特征进行研究.结果表明,Aeromonas veronii M4与PP膜表面均表现出明显的疏水性特征,而Aeromonas caviae N25则呈现亲水性特征,并且A.veronii M4的运动性能也要高于A.caviae N25;另外,2株细菌及PP膜的表面均带有负电荷,表现出明显的电子供体特征,而Lewis酸碱分量U_(mlb)~(AB)则在2株细菌与PP膜的界面作用能中占据着主导地位;依据XDLVO理论,A.caviae N25及A.veronii M4与PP膜之间的总界面作用能均为负值,表明二者在膜上的吸附是一个主动吸附过程,而A.veronii M4-PP膜之间的界面作用能负值最大,说明A.veronii M4具有较高的吸附能力;静态吸附结果则表明,A.veronii M4在PP膜上的吸附量要明显高于A.caviae N25,而2株菌在膜上的吸附行为可由准二级动力学模型进行描述.     

金属氧化物降解六氯苯的活性比较及催化机理研究

以氧化铝(α-Al_2O_3、γ-Al_2O_3)、氧化钙(CaO)、过渡金属氧化物(Mn O_2、α-Fe_2O_3、γ-Fe_2O_3、Ni_2O_3、CuO)为催化剂,考察了催化剂种类、添加比例等因素对六氯苯(Hexachlorobenzene,HCB)降解效果和产物组分的影响.结果表明,催化效果随催化剂添加比例的提高显著增加.在反应温度为350℃,反应时间1 h,金属氧化物添加比例为100∶1的条件下,碱土金属氧化物CaO及过渡金属氧化物中的α-Fe_2O_3和Ni_2O_3降解活性较好,这3种氧化物对HCB的降解率分别达到65.5%、100.0%和100.0%,脱氯率D_1分别为54.4%、81.9%和77.5%.HCB降解有机产物分析结果显示,8种金属氧化物与HCB样品反应产物中均存在低氯代苯,在α-Fe_2O_3和Ni_2O_3的催化作用下有2~4氯代低氯苯检出,说明在降解过程中存在明显的逐级脱氯/加氢反应;与CaO反应后的产物中低氯代苯较少,经拉曼光谱定性分析,有无序碳的检出,说明除了脱氯/加氢还存在脱氯缩合反应.     

铝铁锡共聚物的合成及其特性研究

合成制备了铝铁锡共聚物,测定分析了其水解共聚合和熟化过程中的pH变化,并通过扫描电镜和混凝实验对共聚物的晶形貌像和絮凝作用进行了研究。结果表明：Sn^4 具有比Fe^3 ,Al^3 更强的水解活性,它有使共聚物的分子趋于均一的作用;铝铁锡共聚物的最佳配比为：NAl∶NFe∶NSn=5∶5∶3,最佳水解度B^*＝2．0,此共聚物具有比CPAFC更优良的絮凝性能。     

Novel Polymeric Materials from Biological Oils

A variety of novel polymeric materials ranging from elastomers to tough, rigid plastics have been prepared by the cationic copolymerization of regular soybean oil, low-saturation soybean oil, or conjugated low-saturation soybean oil with various alkene commonomers. Using appropriate compositions and reaction conditions, 70–100% of the soybean oil is covalently incorporated into the cross-linked polymer networks, contributing significantly to cross-linking during copolymerization. The resulting thermosets exhibit thermophysical and mechanical properties that are competitive with those of their petroleum-based counterparts. In addition, good damping and shape memory properties have been obtained by controlling the degree of cross-linking and the rigidity of the polymer backbone. New materials with similar characteristics have also been produced from other biological oils, including tung, and fish oils using the same technique. The new, more valuable properties of these bioplastics suggest numerous promising applications of these novel polymeric materials.     

Ring-Opening Polymerization of Cyclic Esters onto Liquefied Biomass

Ring-opening polymerization of cyclic esters (-caprolactone, -valerolactone, and l-lactide) onto liquefied biomass (LB) was conducted to obtain the polyester-type polyol and to regulate the characteristics of LB. IR and ¹H-NMR spectra of the obtained polyol showed that the polymerization was successfully conducted in the presence of acid catalyst, which is used in liquefaction. The molecular weight (M_w), hydroxyl value, and viscosity were controllable by changing the reaction conditions. Polyester-type polyurethane foams with a wide range of properties were prepared from the obtained polyol with the appropriate combinations of foaming agents.