重金属离子对肺表面活性物质单层膜的影响

为了探究重金属对肺表面活性物质（PS）膜的影响,利用Langmuir–Wilhelmy膜天平,研究了不同种类和浓度的重金属离子与PS单层膜的相互作用.发现Cr³⁺、Cu²⁺、Hg²⁺、Pb²⁺、Cd²⁺、Ni²⁺6种重金属离子均使PS单层的π-A等温线G-LE相变阶段外扩,而Fe³⁺可诱导单层缩合.随后,选取Cd²⁺,Cu²⁺,Hg²⁺,Fe³⁺4种离子进一步探究了重金属浓度对PS单层膜表面活性的影响规律,进行了可压缩模量分析,并结合红外光谱（FTIR）和原子力显微镜（AFM）探究其作用机理,发现Cu²⁺,Fe³⁺和Hg²⁺均会以浓度依赖的方式与PS单层的极性头部发生络合作用,形成复合物,改变膜的稳定性;而Cd²⁺的影响明显弱于其他3种金属离子,但也能使得PS单层有序性增强.     

金鱼藻对Cu2+的生物吸附特征

研究了沉水植物金鱼藻对Cu2 的吸附动力学及热力学特征.结果表明,金鱼藻对Cu2 的吸附在20min内达到平衡,吸附动力学的实验结果符合伪二级动力学方程,其相关系数达到0.9937,表明该吸附为多种反应同时作用的复杂过程.用Langmuir和Freundlich2种吸附等温式拟合吸附热力学的实验结果表明,以Langmuir模型拟合效果更好,相关系数为0.9977,其最大吸附量为7.79mg/g.在解吸实验中,各浓度组的解吸率均在1%以下,表明金鱼藻对Cu2 的吸持作用较强.     

Removal of perfluorinated surfactants from wastewater by adsorption and ion exchange——Influence of material properties,sorption mechanism and modeling

Perfluorooctane sulfonate(PFOS) has attracted increasing concern in recent years due to its world-wide distribution, persistence, bioaccumulation and potential toxicity. The influence of sorbent properties on the adsorptive elimination of PFOS from wastewater by activated carbons, polymer adsorbents and anion exchange resins was investigated with regard to their isotherms and kinetics. The batch and column tests were combined with physicochemical characterization methods, e.g., N_2 physisorption, mercury porosimetry, infrared spectroscopy, differential scanning calorimetry, titrations, as well as modeling. Sorption kinetics was successfully modelled applying the linear driving force(LDF) approach for surface diffusion after introducing a load dependency of the mass transfer coefficient βs.The big difference in the initial mass transfer coefficient βs,0, when non-functionalized adsorbents and ion-exchange resins are compared, suggests that the presence of functional groups impedes the intraparticle mass transport. The more functional groups a resin possesses and the longer the alkyl moieties are the bigger is the decrease in sorption rate.But the selectivity for PFOS sorption is increasing when the character of the functional groups becomes more hydrophobic. Accordingly, ion exchange and hydrophobic interaction were found to be involved in the sorption processes on resins, while PFOS is only physisorptively bound to activated carbons and polymer adsorbents. In agreement with the different adsorption mechanisms, resins possess higher total sorption capacities than adsorbents. Hence, the latter ones are rendered more effective in PFOS elimination at concentrations in the low μg/L range, due to a less pronounced convex curvature of the sorption isotherm in this concentration range.     

Removal of Cd2+ from water by Friedel’s salt (FS: 3CaO.Al2O3·CaCl2·10H2O): Sorption characteristics and mechanisms

The development of low-cost and efficient new mineral adsorbents has been a hot topic in recent years. In this study, Friedel’s salt (FS:3CaO·A12O3 ·CaCl2 ·10H2O), a hexagonal layered inorganic absorbent, was synthesized to remove Cd2+ from water. The adsorption process was simulated by Langmuir and Freundlich models. The adsorption mechanism was further analyzed with TEM, XRD, FT-IR analysis and monitoring of metal cations released and solution pH variation. The results indicated the adsorbent FS had an outstanding ability for Cd(Ⅱ) adsorption. The maximum adsorption capacity of the FS for Cd(Ⅱ) removal can reach up to 671.14 mg/g. The nearly equal numbers of Cd2+ adsorbed and Ca2+ released demonstrated that ion-exchange (both surface and inner) of the FS for Cd(Ⅱ) played an important role during the adsorption process. Furthermore, the surface of the FS after adsorption was microscopically disintegrated while the inner lamellar structure was almost unchanged. The behavior of Cd(Ⅱ) adsorption by FS was significantly affected by surface reactions. The mechanisms of Cd2+ adsorption by the FS mainly included surface complexation and surface precipitation. In the present study, the adsorption process was fitted better by the Langmuir isotherm model (R2 = 0.9999) than the Freundlich isotherm model (R2 = 0.8122). Finally, due to the high capacity for ion-exchange on the FS surface, FS is a promising layered inorganic adsorbent for the removal of Cd(Ⅱ) from water.     

铅在棉秆基活性炭上的吸附动力学与热力学

以棉秆与棉秆纤维为原料,利用磷酸活化法制备了低成本的高比表面微孔棉秆基活性炭,通过静态实验研究了活性炭对水溶液中铅的吸附特性,测定了溶液pH值、吸附时间、溶液温度对吸附的影响,探讨了吸附动力学、热力学及吸附机制.根据低温液氮(N2/77K)吸附测定数据,以BET方程、BJH法及H-K法对活性炭孔结构进行了表征,以Boehm滴定、FTIR、零电荷点pHPZC测定及元素分析定量表征活性炭表面含氧官能团.结果表明,以棉秆和棉秆纤维为原料制备的活性炭的比表面积分别为1570和1731m2·g-1,含氧酸官能团含量分别为1.43和0.83mmol·g-1,均高于商业活性炭ST1300.静态吸附实验表明,棉秆基活性炭对铅有较大的吸附容量和吸附效率,最大吸附量超过120mg·g-1,溶液pH对吸附有较大的影响,吸附量随时间增大而增大,在5min内可达饱和吸附量的80%;吸附动力学数据符合假二级方程,Freundlich方程能更好地描述等温吸附行为;热力学研究表明,吸附吉布斯自由能(ΔG0)0,而焓变(ΔH0)0,说明吸附为吸热的自发反应过程,升温有利于吸附,离子交换可能在吸附过程中起了重要作用.     

Mg/Al双金属氧化物对As(V)吸附性能的研究

研究了以镁铝水滑石为原料制备的Mg/Al双金属氧化物对溶液中As(V)的吸附作用及其影响因素.结果表明：Mg/Al双金属氧化物对As(V)具有较强的吸附能力,吸附规律符合Langmuir等温吸附方程,根据计算所得的理论最大吸附量为51.02 mg·g-1,与实验得出的最大吸附量50.53 mg·g-1基本一致;运用3种...     

西辽河流域沙土的氨氮解吸行为研究

采用小型回填式土柱淋溶实验方法研究了西辽河流域沙土的氨氮解吸行为。结果表明,西辽河流域沙土的氨氮解吸行为符合Langmuir和Freundlich解吸等温式;沙土氨氮解吸比率Dr在0.44～0.99之间,平均为0.75,解吸迟滞性指数TⅡ在0.05～0.65之间,平均为0.29,沙土对氨氮的解吸迟滞性较强,解吸可逆性较弱。被吸附的氨氮解吸淋失的环境风险较小;沙土氨氮解吸比率Dr与土壤有机质含量、粘粒含量和粗粘粒含量呈极显著负相关,影响程度顺序为:有机质含量>粗粘粒含量>粘粒含量;解吸分配系数k和解吸迟滞性指数与土壤有机质含量分别呈极显著和显著正相关,与粘粒含量和粗粘粒含量没有相关性;草地、农田和林地结构由于土壤有机质和团聚体含量较高,氨氮解吸迟滞性较强,氨氮流失的环境风险较小,沙荒地结构氨氮流失的环境风险较大。     

粉煤灰对混合染料的吸附性能研究

以燃煤废弃物粉煤灰作为吸附剂,对活性红23和分散蓝56混合染料溶液进行吸附性能研究.实验结果表明:粉煤灰优先吸附离子型的活性染料,混合溶液中对活性红23的吸附能够在30 min达到平衡,而对分散蓝56的吸附则需要150 min才能够达到平衡,吸附动力学符合准二级吸附模型.在弱酸性环境中粉煤灰对分散染料的脱色高于碱性环境...     

碱改性净水污泥对水中氨氮的吸附效能研究

采用氢氧化钠浸渍法改性净水污泥,研究了碱改性净水污泥对水中NH+4的去除性能.同时,考察了模拟废水pH、吸附剂投加量、NH+4初始浓度、吸附温度及吸附时间对吸附性能的影响.结果表明,当pH为弱酸性或中性,投加碱改性净水污泥20 g·L-1时,在室温下对初始浓度为50 mg·L-1的NH+4模拟废水振荡吸附120 min,可达到氨氮排放二级标准.将实验数据分别用吸附等温模型和动力学模型进行拟合,发现净水污泥对NH+4的吸附符合Langmuir模型和二级动力学模型,且净水污泥对氨氮的吸附包括静电吸引和离子交换两种作用机理.     

白银天然沸石对磷的吸附机理及性能研究

为探明天然沸石对磷的吸附机理,首先利用扫描电镜、X射线衍射、X荧光分析等对甘肃白银产天然沸石进行了表征,然后通过静态实验探讨了吸附时间、磷初始浓度、pH值等因素对沸石除磷性能的影响.研究结果表明：沸石对水溶液中磷的吸附动力学过程符合Pseudo second-order模型;Freudlich和Langmuir模型均可较好地描述沸石对磷的吸附特征;沸石对磷的吸附量随pH值增大而明显减小.