物化-生化组合工艺处理化纤厂浆粕综合废水

根据化纤厂浆粕综合废水的水质特点 ,选择采用中和曝气 水解酸化 生物接触氧化 絮凝沉降处理工艺。实验结果表明 :当浆粕综合废水进水CODCr浓度 310 0～ 34 6 0mg/L ,BOD5浓度 10 2 0～ 142 0mg/L范围内时 ,处理后水质可达到《污水综合排放标准》GB8978 96中化纤浆粕工业二级排放标准。     

缺氧生物筛选--好氧处理技术及其在造纸废水处理工程上的应用

阐述了缺氧生物筛选——好氧生物处理技术的基本原理、特点和设计要求。该技术用在造纸废水处理工程上作为主要的生化处理单元，可抑制丝状菌繁殖，避免污泥膨胀，而且还具有耐冲击负荷、污泥沉降性能好等特点，实际工程取得了理想的效果。     

Decolorization of oxygen-delignified bleaching effluent and biobleaching of oxygen-delignified kraft pulp by non-white-rot fungus Geotrichum candidum Dec 1

Decolorization of oxygen-delignified bleaching effluent (abbreviated as OBE) and biobleaching of oxygen-delignified kraft pulp (OKP) were conducted using a non-white rot fungus Geotrichum candidum Dec 1 (abbreviated as Dec 1) which has ability to decolorize various synthetic dyes and molasses. Dec 1 decolorized up to 77% of OBE for 6 days. In addition, Dec 1 increased the brightness of OKP from 47.8% to 51.2% and decreased the kappa value of OKP from 12.4 to 10.4 points during a 6-day incubation period at a 25% of pulp-concentration. At 2% pulp-concentration, the brightness of OKP increased by 13% and the kappa value of OKP decreased by 4 points only for a 3-day incubation period. When the decolorized OBE was used for bleaching of OKP, the brightness of OKP increased to 62.7% under the shaking culture to a 2% pulp-concentration using culture fluid of decolorized OBE. It was revealed that Dec 1 is a potential to apply for decolorization of wastewater and biobleaching of pulp in paper-mills.     

基于资源环境承载力的全国造纸工业类型区划分研究

本文从造纸行业特征、资源消耗、污染物排放等方面入手,结合区域资源环境承载力,分析行业发展可能带来的环境污染问题.分析造纸行业发展与其所需主要资源间的空间布局关系,明确选定行业发展的资源、环境和生态制约条件.结合造纸行业特点,从环境约束、生态约束和资源约束入手,构建其环境管理类型区划分的指标体系;采用层次分析法、灰色定权聚类分析等方法对分区数据进行必要处理,采用二维判断矩阵法等方法进行环境管理类型区划分,对实施针对造纸行业分区域、分类别、差别化的环境管理提供了决策依据和方法基础.     

制浆造纸工业废水达标可行性研究

2008年6月颁布的《制浆造纸工业水污染物排放标准》(GB 3544-2008)与原标准(GB 3544-2001)相比,增加了控制排放的污染物项目,污染物排放控制要求也大幅提高,传统的废水二级生化处理工艺已不能满足新标准要求。文章通过梳理和分析调研及现场监测的资料和数据,提出目前制浆造纸企业通过有效的技术改造和升级,增加废水三级深度处理流程,在加强管理的情况下可以实现废水稳定达标排放。但不可避免会增加企业建设和运营成本,大中型制浆造纸企业尚可接受,对小型企业的冲击则相对较大。同时提出目前制浆造纸企业废水处理仍存在一些技术和管理方面的问题,尚需通过制定技术规范、强化环境监管、深入开展相关基础研究等多方面对策,优化制浆造纸行业结构调整,确保行业污染物减排。     

对小纸厂碱回收可行性的初步评价

本文对小型造纸厂的碱回收在技术上和经济上的可行性进行了分析,作出了当前是中、小型造纸厂搞碱回收的有利时机的初步评价。     

Levels and risk assessment of chemical contaminants in byproducts for animal feed in Denmark

With aim to provide information on chemical contaminants in byproducts in animal feed, the data from an official control by the Danish Plant Directorate during 1998–2009, were reviewed and several samples of citrus pulp and dried distillers grains with solubles (DDGS) were additionally collected for analysis and risk assessment. The levels of contaminants in the samples from the official control were below maximum limits from EU regulations with only a few exceptions in the following groups; dioxins and dioxin-like polychlorobiphenyls (PCBs) in fish-containing byproducts and dioxins in vegetable and animal fat, hydrogen cyanide in linseed, and cadmium in sunflowers. The levels of pesticides and mycotoxins in the additionally collected samples were below maximum limits. Enniatin B (ENN B) was present in all DDGS samples. The hypothetical cases of carry-over of contamination from these byproducts were designed assuming total absorption and accumulation of the ingested contaminant in meat and milk and high exposure (a byproduct formed 15–20% of the feed ration depending on the species). The risk assessment was refined based on literature data on metabolism in relevant animal species. Risk assessment of contaminants in byproducts is generally based on a worst-case approach, as data on carry-over of a contaminant are sparse. This may lead to erroneous estimation of health hazards. The presence of ENN B in all samples of DDGS indicates that potential impact of this emerging mycotoxin on feed and food safety deserves attention. A challenge for the future is to fill up gaps in toxicological databases and improve models for carry-over of contaminants.     

造纸工业总排水及漂白废水中AOX监测方法的研究

运用TOX测定仪对造纸工业废水及漂白废水中AOX(可吸附有机卤素)测定;水样用硝酸调pH＜2后,以双根活性炭玻璃填充柱连续吸附;将吸附有机物的活性炭在氧气流中燃烧热解、用微库仑法测定其卤化氢.样品前处理比现行活性炭振荡吸附法样品及试剂用量少、快速、重现性好.方法测定浓度下限为3.73μg/L.     

亚铵法制浆黑液作肥料对水环境影响的研究

通过亚铵法制浆蒸煮黑液直接作农肥施于水稻田的研究，给出了不同施肥方式连续数天田间水和渗滤水中黑液污染物变化情况，定量描述了黑液作肥料直接施于水稻田对水环境的影响。     

Mechanical Property Characterization of Plasticized Sugar Beet Pulp and Poly(Lactic Acid) Green Composites Using Acoustic Emission and Confocal Microscopy

Sorbitol and glycerol were used to plasticize sugar beet pulp-poly(lactic acid) green composites. The plasticizer was incorporated into sugar beet pulp (SBP) at 0%, 10%, 20%, 30% and 40% w/w at low temperature and shear and then compounded with poly(lactic acid) (PLA) using twin-screw extrusion and injection molding. The SBP:PLA ratio was maintained at 30:70. As expected, tensile strength decreased by 25% and the elongation increased. Acoustic emission (AE) showed correlated debonding and fracture mechanisms for up to 20% w/w plasticizer and uncorrelated debonding and fracture for 30–40% sorbitol and 30% glycerol content in SBP–PLA composites. All samples had a well dispersed SBP phase with some aggregation in the PLA matrix. However, at 40% glycerol plasticized SBP–PLA composites exhibited unique AE behavior and confocal microscopy revealed the plasticized SBP and PLA formed a co-continuous two phase system.