Unexpected toxicity decrease during photoelectrochemical degradation of atrazine with NaCl

This report shows an unexpected toxicity decrease during atrazine photoelectrodegradation in the presence of NaCl. Atrazine is a pesticide classified as endocrine disruptor occurring in industrial effluents and agricultural wastewaters. We therefore studied the effects of the degradation method, electrochemical and electrochemical photo-assisted, and of the supporting electrolyte, NaCl and Na₂SO₄, on the residual toxicity of treated atrazine solutions. We also studied the toxicity of treated atrazine solutions using Artemia nauplii. Results show that at initial concentration of 20 mg L⁻¹, atrazine was completely removed in up to 30 min using 10 mA cm⁻² electrolysis in NaCl medium, regardless of the electrochemical method used. The total organic carbon removal by the photo-assisted method was 82% with NaCl and 95% with Na₂SO₄. The solution toxicity increased during sole electrochemical treatment in NaCl, as expected. However, the toxicity unexpectedly decreased using the photo-assisted method. This finding is a major discovery because electrochemical treatment with NaCl usually leads to the formation of toxic chlorine-containing organic degradation by-products.     

Molecular population genetics of male and female mitochondrial genomes in European mussels <Emphasis Type="Italic">Mytilus</Emphasis>

The doubly uniparental system of mitochondrial inheritance (DUI) is best known in marine mussels Mytilus. Under DUI there are two types of mitochondrial DNA (mtDNA). The female type (F) is transmitted to offspring of both genders and the male type (M) exclusively to sons; consequently two distinct mtDNA lineages exist. The M lineage evolves under more relaxed selection than the F lineage resulting in higher polymorphism within the M lineage. Though this polymorphism is expected to make inferences on fine population structure easier using M instead of F data, no comprehensive comparative data exist to support this claim. We sequenced a 1,205 bp fragment of M and F mtDNA comprising parts of the COIII and ND2 genes, and analysed 204 individuals representing three Mytilus species: M. edulis, M. galloprovincialis and M. trossulus from 13 European sampling sites. A clear distinction between Mediterranean and Atlantic populations was found with both M and F data, but much better geographic differentiation was found within the Atlantic using F rather than M data. In particular, Atlantic M. galloprovincialis can be differentiated from Atlantic M. edulis, and further subdivision of Atlantic M. edulis is possible using the F data but not the M data. Multiple tests of selection were carried out to attempt to explain this paradox. We concluded that the overall pattern of polymorphism is consistent with strong purifying selection; not only is this selection relaxed in the M lineage in comparison with the F lineage, but it is also more frequently interrupted by periodic selective sweeps within the M lineage.     

Creating an emission model based on portable emission measurement system for the purpose of a roundabout

Environmental Science and Pollution Research - Road transport is the main source of pollution to the environment in urban areas; therefore, there is a need to accurately estimate the amount of...     

Phylogenetic diversity and functional characterization of the Manila clam microbiota: a culture-based approach

According to the hologenome theory, the microbiota contributes to the fitness of the holobiont having an important role in its adaptation, survival, development, health, and evolution. Environmental stress also affects the microbiota and its capability to assist the holobiont in coping with stress factors. Here, we analyzed the diversity of cultivable bacteria associated with Manila clam tissues (mantle, gills, hemolymph) in two non-contaminated sites (Portugal and France) and one metal-contaminated site (Portugal). A total of 240 isolates were obtained. Representative isolates (n = 198) of the overall diversity were identified by 16S rDNA sequencing and subjected to functional characterization. Isolates affiliated with Proteobacteria, Actinobacteria, Firmicutes, and Bacteroidetes. Proteobacteria (mostly Pseudoalteromonadaceae and Vibrionaceae) were dominant in non-contaminated sites while Actinobacteria (mostly Microbacteriaceae) dominated in the metal-contaminated site. The main factor affecting the microbiota composition was contamination. No significant differences were observed between clam tissues and geographic regions. Several isolates tested positive for antibacterial activity, biofilm formation, protease, and siderophore production. The results show that the Manila clam harbors a diverse microbiota that may contribute to clam protection and overall fitness, as well as to its adaptation to stressful environments. In addition, the Manila clam microbiota is revealed as a promising source of novel probiotics with potential application in aquaculture.     

Influence of physical factors on polycyclic aromatic hydrocarbons (PAHs) content in vegetable oils

The aim of this study was to test the hypothesis about physical factors causing a significant decrease of polycyclic aromatic hydrocarbon (PAH) compounds in foodstuffs. For this purpose, extraction of 16 PAHs (prioritised by EPA) from selected foodstuffs (rapeseed oil and sunflower oil) was carried out. The changes in PAH content in oils exposed to selected physical factors (UV radiation, temperature and time) were observed. Oils under study were exposed to two types of UV radiation: direct and indirect (through a glass plate). In both experiments, a reduction of 16 PAHs in oils was recorded but in the latter a PAH reduction was not as high. In another experiment, the temperature of oils was raised to 40, 100 and 200°C. As a result, the content of PAHs has decreased significantly. In both cases, exposure to UV radiation and high temperature resulted in the reduction of PAHs, it was strongly correlated with the duration of experiments. The results showed relatively low contamination of oil with PAHs. Only for rapeseed oil, the level of said contamination was substantially higher than laid down limits.     

Effect of the C:N:P ratio on the denitrifying dephosphatation in a sequencing batch biofilm reactor (SBBR)

A series of investigations were conducted using sequencing batch biofilm reactor(SBBR) to explore the influence of C:N:P ratio on biological dephosphatation including the denitrifying dephosphatation and the denitrification process.Biomass in the reactor occurred mainly in the form of a biofilm attached to completely submerged disks.Acetic acid was used as the source of organic carbon.C:N:P ratios have had a significant effect on the profiles of phosphate release and phosphate uptake and nitrogen removal.The highest rates of phosphate release and phosphate uptake were recorded at the C:N:P ratio of 140:70:7.The C:N ratio of 2.5:1 ensured complete denitrification.The highest rate of denitrification was achieved at the C:N:P ratio of 140:35:7.The increase of nitrogen load caused an increase in phosphates removal until a ratio C:N:P of 140:140:7.Bacteria of the biofilm exposed to alternate conditions of mixing and aeration exhibited enhanced intracellular accumulation of polyphosphates.Also,the structure of the biofilm encouraged anaerobic–aerobic as well as anoxic–anaerobic and absolutely anaerobic conditions in a SBBR.These heterogeneous conditions in the presence of nitrates may be a significant factor determining the promotion of denitrifying polyphosphate accumulating organism(DNPAO) development.     

TPS/PCL Composite Reinforced with Treated Sisal Fibers: Property, Biodegradation and Water-Absorption

Sisal fibers bleached with sodium-hydroxide followed by hydrogen peroxide treatment were incorporated in a thermoplastic starch/ε-polycaprolactone (TPS/PCL) blend via extrusion processing. These samples with smooth and homogenous surfaces were examined for their property, biodegradability and water absorption. Scanning electron microscopy revealed that the fibers were well dispersed in the matrix. In addition, it was found that the fibers and matrices interacted strongly. Blends with 20 % (dry weight-basis) fiber content showed some fiber agglomeration. Whereas blends with 10 % fibers showed increased crystallinity and lower water absorption capacity. The CO₂ evolution study showed that the thermoplastic starch samples without any additives had the highest rate and extent of degradation whereas the neat PCL samples had the lowest degradation rate. Addition of fiber to the TPS/PCL blend exhibited the degradation rates and extents that were somewhere in between the pure TPS and neat PCL. This work demonstrates that TPS/PCL composites reinforced with bleached sisal has superior structural characteristics and water resistance and thus, can be used as polymeric engineering composites for different applications.     

Macro-porosity and leaching of atrazine in tilled and orchard loamy soils

Atrazine is the most commonly detected herbicide in the groundwater. Leaching of atrazine largely depends on soil management practices. The aim of this study was to examine leaching of atrazine in tilled and orchard silty loam soils. The experimental objects included: conventionally tilled field (CT) with main tillage operations including pre-plow (10 cm) + harrowing, mouldboard ploughing (20 cm), and a 35 year-old apple orchard (OR) with a permanent sward. To determine leaching of atrazine soil columns of undisturbed structure were taken with steel cylinders of 21.5 cm diameter and 20 cm high from the depth of 0–20 cm. All columns were equilibrated at water content corresponding to field capacity (0.21 kg kg⁻¹). Atrazine suspended in distilled water was dripped uniformly onto the surface of each column. Then water was infiltrated and breakthrough times of leachates were recorded. Atrazine concentration in the leachates was determined by means of HPLC Waters. Macro-porosity and percolation rate were higher in OR than CT soil. Cumulative recovery % of the atrazine applied was 1.267% for OR and approximately one third more from the CT soil but the rate of leaching (per unit of time) was greater from the OR soil. The lower leaching under OR than CT can be due to a greater SOM and the presence of earthworm burrows with organic burrow linings that could adsorb atrazine and contribute to preferential flow allowing solutes to bypass parts whereas the greater rate of leaching due to a greater infiltration rate.The results indicate potential of management practices for minimizing atrazine leaching.     

Biodegradation of Thermoplastic Polyurethanes from Vegetable Oils

Thermoplastic urethanes based on polyricinoleic acid soft segments and MDI/BD hard segments with varied soft segment concentration were prepared. Soft segment concentration was varied from, 40 to 70 wt%. Biodegradation was studied by respirometry. Segmented polyurethanes with soft segments based on polyricinoleic acid degrade relatively slow losing about 11% carbon after 30 days, but faster than corresponding petrochemical polyesterurethanes. Since biodegradation proceeds mainly through the soft segments, higher soft segment content polymers displayed slightly higher biodegradation. Polyurethanes with dispersed hard domains in the soft phase displayed slightly faster biodegradation than those with co-continuous morphology. Polyester diol degrades slower than castor oil but significantly faster than the polyurethanes with built in soft segments from the same diol. Castor oil biodegrades slower than soybean oil.