The influence of biomass energy consumption on CO<Subscript>2</Subscript> emissions: a wavelet coherence approach

In terms of today, one may argue, throughout observations from energy literature papers, that (i) one of the main contributors of the global warming is carbon dioxide emissions, (ii) the fossil fuel energy usage greatly contributes to the carbon dioxide emissions, and (iii) the simulations from energy models attract the attention of policy makers to renewable energy as alternative energy source to mitigate the carbon dioxide emissions. Although there appears to be intensive renewable energy works in the related literature regarding renewables’ efficiency/impact on environmental quality, a researcher might still need to follow further studies to review the significance of renewables in the environment since (i) the existing seminal papers employ time series models and/or panel data models or some other statistical observation to detect the role of renewables in the environment and (ii) existing papers consider mostly aggregated renewable energy source rather than examining the major component(s) of aggregated renewables. This paper attempted to examine clearly the impact of biomass on carbon dioxide emissions in detail through time series and frequency analyses. Hence, the paper follows wavelet coherence analyses. The data covers the US monthly observations ranging from 1984:1 to 2015 for the variables of total energy carbon dioxide emissions, biomass energy consumption, coal consumption, petroleum consumption, and natural gas consumption. The paper thus, throughout wavelet coherence and wavelet partial coherence analyses, observes frequency properties as well as time series properties of relevant variables to reveal the possible significant influence of biomass usage on the emissions in the USA in both the short-term and the long-term cycles. The paper also reveals, finally, that the biomass consumption mitigates CO₂ emissions in the long run cycles after the year 2005 in the USA.     

Preparation of Soybean Oil Polymers with High Molecular Weight

The cationic polymerization of soybean oils was initiated by boron trifluoride diethyl etherate in supercritical carbon dioxide medium. The resulting polymers had molecular weight ranging from 21,842 to 118,300 g/mol. Nuclear magnetic resonance spectroscopy and gel permeation chromatography analysis confirmed the polymerization had occurred. Parameters affecting the polymerization were studied, which included initiator amount and reaction time. Results show that the longer reaction time, up to 3 h, favored the higher molecular weight of polymers at conditions of 140 °C and initiator BF₃·OEt₂ (2.5 g, 0.018 mol). When reaction time was increased further, the molecular weight of polymers stayed the same or slightly decreased. Increased concentration of initiator gave the higher molecular weight of polymers. The high molecular weight polymers were possibly formed through two path ways: polymerization and intermolecular Diels-Alder reaction.     

Combining AHP with GIS for landfill site selection: A case study in the Lake Beyşehir catchment area (Konya,Turkey)

Landfills are the most common method for the disposal of municipal solid waste (MSW) in Turkey. However, determining the location of landfill sites is a difficult and complex process because it must combine social, environmental and technical parameters. Additionally, it depends on several criteria and regulations. The main objective of this study was to select of a landfill site for the Lake Bey?ehir catchment area. The Bey?ehir Lake is the largest freshwater lake and drinking water reservoir in Turkey, but there is no controlled landfill site in the region. Therefore, the landfill site should be determined such that the lake is protected. To determine the most suitable landfill site, an analytical hierarchy process (AHP) was combined with a geographic information system (GIS) to examine several criteria, such as geology/hydrogeology, land use, slope, height, aspect and distance from settlements, surface waters, roads, and protected areas (ecologic, scientific or historic). Each criterion was evaluated with the aid of AHP and mapped by GIS. Data were assorted into four suitability classes within the study area, i.e., high, moderate, low and very low suitability areas, which represented 3.24%, 7.55%, 12.70% and 2.81%, of the study area, respectively. Additionally, 73.70% was determined to be completely unsuitable for a landfill site. As a result, two candidate landfill sites are suggested and discussed. The final decision for landfill site selection will require more detailed field studies.     

Water quality assessment at Ömerli Dam using remote sensing techniques

Water quality at Omerli Dam, which is a vital potable water resource of Istanbul City, Turkey was assessed using the first four bands of Landsat 7-ETM satellite data, acquired in May 2001 and water quality parameters, such as chlorophyll-a, suspended solid matter, secchi disk and total phosphate measured at several measurement stations at Omerli Dam during satellite image acquisition time and archived at the Marine Pollution and Ecotoxicology laboratory of the Marmara Research Center, where this study was carried out. Establishing a relationship between this data, and the pixel reflectance values in the satellite image, chlorophyll-a, suspended solid matter, secchi disk and total phosphate maps were produced for the Omerli Dam.     

Heavy metals in mullet, Liza abu, and catfish, Silurus triostegus, from the Atatürk Dam Lake (Euphrates), Turkey

The distribution of some heavy metals in three different organs of mullet, Liza abu, and catfish, Silurus triostegus, from Atatürk Dam Lake located on Euphrates (Turkey) was studied. Co and Mo concentrations were below limits of detection in all fish organs, whereas Ni was also below limits in organs of mullet. The metal accumulation in the liver and gill of L. abu and S. triostegus was found to be quite high in comparison with the muscle. In general, the concentrations are similar to those previously observed on other fish studied in Atatürk Dam Lake and lower than those determined in Tigris River. The analysed metals (Co, Cu, Fe, Mn, Mo, Ni and Zn) were found in fish muscle at mean concentrations under the permissible limits proposed by FAO.     

Mapping of bioclimatic comfort for potential planning using GIS in Aydin

People are relaxed (satisfied or well-off) in what is described as comfortable climatic conditions. In such conditions, a person’s energy balance is not disturbed because of stresses from extreme heat or cold. Bioclimatic structure has been well researched and should be a consideration in the planning process for arranging comfortable spaces. It represents the understanding that energy balance is one of the basic elements of a sustainable landscape design. The goals of this study have been to create ideal places for human thermal comfort and to advance objectives focused on the importance of sustainable and ecological landscape planning and design work, along with their accompanying economic benefits. In this study, which focuses on the climate of the Province of Aydin, the most suitable areas for bioclimatic comfort have been identified. The climate values for the Aydin Province have been taken from a total of 22 meteorological stations. Stations at altitudes ranging from 11 to 871 m were used to note the climate changes that occurred. The average temperature, relative humidity, and wind speed from each station, including data collected using Geographic Information System (GIS) software, were transferred. GIS maps were then created from the imported data, and areas of optimal comfort around the city of Aydin were determined. The results show the range that is suitable for a bioclimatic comfort zone in Aydin. The bioclimatic comfort range was determined to be roughly 17 °C for Aydin, and the city of Aydin demonstrated a comfort range between 14 and 19 °C. As a result, the city of Aydin was shown to be a suitable area for bioclimatic comfort.     

The effects of fenvalerate on different tissues of freshwater fish Cirrhinus mrigala

The histopathological changes of fenvalerate on the gill, kidney, liver and intestine tissues of the Cirrhinus mrigala were determined by light microscopy. The fish were exposed to two sub-lethal concentrations of fenvalerate (1.5-3.0 ppb). The most common gill changes at all concentrations of fenvalerate were epithelial hyperplasia, epithelial necrosis, desquamation and lamellar fusion. Besides, epithelial lifting, oedema, swelling at the tips of secondary lamellae and curling of secondary lamellae were other histopathological changes. Necrosis of tubular epithelium, pycnotic nuclei in the hematopoietic tissue, hypertrophied epithelial cells of renal tubules, narrowing of the tubular lumen, expansion of space inside the Bowman's capsule and contraction of the glomerulus were observed in kidney tissues of fish. Hepatic lesions in the liver tissues of fish exposed to fenvalerate were characterized by congestion, cloudy swelling of hepatocytes and focal necrosis. Atrophy of epithelial cells, necrosis of epithelial cells, desquamation of mucosal epithelium and infiltration of lymphocytes into the lamina propria were detected in intestine tissues of fish after exposure to fenvalerate.     

Evaluation of ecological risk,source, and spatial distribution of some heavy metals in marine sediments in the Middle and Eastern Black Sea region,Turkey

Environmental Science and Pollution Research - In the present study, the concentration levels of heavy metals such as Mn, Fe, Ni, Cu, Zn, Cr, and Pb in sediment samples collected from 16 sampling...     

Removal of Ni(II) and Cu(II) ions using native and acid treated Ni-hyperaccumulator plant Alyssum discolor from Turkish serpentine soil

Alyssum discolor biomass was collected from serpentine soil and was used for removal of metal ions. The plant species grown on serpentine soils are known to be rich with metals ions and thus have more capability for accumulating heavy metals. Native and acid-treated biomass of A. discolor (A. discolor) were utilized for the removal of Ni(II) and Cu(II) ions from aqueous solutions. The effects of contact time, initial concentration, and pH on the biosorption of Ni(II) and Cu(II) ions were investigated. Biosorption equilibrium was established in about 60 min. The surface properties of the biomass preparations were varied with pH, and the maximum amounts of Ni(II) and Cu(II) ions on both A. discolor biomass preparations were adsorbed at pH 5.0. The maximum biosorption capacities of the native, and acid-treated biomass preparations for Ni(II) were 13.1 and 34.7 mg g⁻¹ and for Cu(II) 6.15 and 17.8 mg g⁻¹ dry biomass, respectively. The biosorption of Ni(II) and Cu(II) ions from single and binary component systems can be successfully described by Langmuir and Freundlich isotherms. When the heavy metal ions were in competition, the amounts of biosorbed metal ions on the acid treated plant biomass were found to be 0.542 mmol g⁻¹ for Ni(II) and 0.162 mmol g⁻¹ for Cu(II), the A. discolor biomass was significantly selective for Ni(II) ions. The information gained from these studies was expected to indicate whether the native, and acid-treated forms can have the potential to be used for the removal and recovery of Ni(II) ions from wastewaters.     

Indoor airborne fungal pollution in newborn units in Turkey

Pathogenic and/or opportunistic fungal species are major causes of nosocomial infections, especially in controlled environments where immunocompromised patients are hospitalized. Indoor fungal contamination in hospital air is associated with a wide range of adverse health effects. Regular determination of fungal spore counts in controlled hospital environments may help reduce the risk of fungal infections. Because infants have inchoate immune systems, they are given immunocompromised patient status. The aim of the present study was to evaluate culturable airborne fungi in the air of hospital newborn units in the Thrace, Marmara, Aegean, and Central Anatolia regions of Turkey. A total of 108 air samples were collected seasonally from newborn units in July 2012, October 2012, January 2013, and April 2013 by using an air sampler and dichloran 18% glycerol agar (DG18) as isolation media. We obtained 2593 fungal colonies comprising 370 fungal isolates representing 109 species of 28 genera, which were identified through multi-loci gene sequencing. Penicillium, Aspergillus, Cladosporium, Talaromyces, and Alternaria were the most abundant genera identified (35.14, 25.40, 17.57, 2.70, and 6.22% of the total, respectively).